5 MICROMASTER 420 specifications

Transcription

1 Issue 10/06 This Chapter contains: Table 5-1 Table 5-2 Table 5-3 Table 5-4 contains the general technical specifications for the MICROMASTER 420 inverter contains terminal tightening torques contains information on reducing the current as a function of the pulse frequency includes various tables of specific technical data for individual MICROMASTER 420 inverters 6SE6400-5AA00-0BP0 183

2 Issue 10/06 Table 5-1 MICROMASTER Performance Ratings Feature Mains operating voltage and Power ranges Specification Input frequency Output frequency Power factor 0,7 Inverter efficiency 96 % to 97 % Overload capability Inrush current Power-ON-OFF cycle time Control method Pulse frequency Fixed frequencies Skip frequencies Setpoint resolution Digital inputs Analogue input Relay output Analogue output Serial interface 1 AC 200 V to 240 V ± 10 % 0,12 kw 3,0 kw (0,16 hp 4,0 hp) 3 AC 200 V to 240 V ± 10 % 0,12 kw 5,5 kw (0,16 hp 7,5 hp) 3 AC 380 V to 480 V ± 10 % 0,37 kw 11,0 kw (0,50 hp 15,0 hp) 47 Hz to 63 Hz 0 Hz to 650 Hz 50 % overload capability for 60 s within 5 min period referred to the rated output current Less than nominal input current Every 30 s Linear V/f Control; Linear V/f with Flux Current Control (FCC), Quadratic V/f Control; Multi-point V/f control 2 khz to 16 khz (2 khz steps) 7, programmable 4, programmable 0.01 Hz Digital, 0.01 Hz Serial, 10 bit Analogue (motor potentiometer 0.1 Hz [0.1% (in PID mode)]) 3, programmable (isolated), switchable active high / active low (PNP/NPN) 1, (0 to 10 V) used for frequency setpoint or PI feedback signal, scalable or usable as 4 th digital input 1, programmable 30 V DC / 5 A (resistive), 250 V AC / 2 A (inductive) 1, programmable (0 ma to 20 ma) RS-485, Option RS-232 Electromagnetic compatibility Optional EMC filters to EN55011 Class A or B, also Internal Class A filters available Braking DC braking, compound braking Protection level IP20 Temperature range -10 C to +50 C (14 F to 122 F) Storage temperature Humidity Operational altitudes Protection features Standards CE Marked -40 C to +70 C (-40 F to 158 F) < 95 % RH non-condensing up to 1000 m above sea level without derating Undervoltage, Overvoltage, Overload, Ground Faults, Short circuit, Stall Prevention, Motor Blocking Protection, Motor Overtemperature, Inverter Overtemperature, Parameter Interlock UL, cul, CE, C-tick Conformity with EC Low Voltage Directive 73/23/EEC and Electromagnetic Compatibility Directive 89/336/EEC 184 6SE6400-5AA00-0BP0

3 Issue 10/06 Table 5-2 Dimensions, required cooling air flow and tightening torques for power terminals Frame Size Dimensions Required cooling air flow Tightening torque for power connections mm l/s 4.8 Nm 1.1 A W x H x D inch CFM 10.2 lbf.in 10 mm l/s 24 Nm 1.5 B W x H x D inch CFM 51 lbf.in 13.3 mm l/s 54.9 Nm 2.25 C W x H x D inch CFM lbf.in 20 Table 5-3 Current reduction depending on pulse frequency Mains voltage Power (CT) Output current in A with a switching frequency of: [kw] 4 khz 6 khz 8 khz 10 khz 12 khz 14 khz 16 khz 1/3 AC 200 V 0.12 to 5.5 Factory setting 16 khz no derating necessary 3 AC 400 V SE6400-5AA00-0BP0 185

4 Issue 10/06 Table 5-4 MICROMASTER 420 Specifications In order to have a UL compliant installation fuses from the SITOR range with the appropriate current rating must be used. Input voltage range 1 AC 200 V 240 V, ± 10 % (with built in Class A Filter) Order No. 6SE6420-2AB11-2AA1 2AB12-2AB13-7AA1 2AB15-2AB17-2AB21-1BA1 2AB21-5BA1 2AB22-2BA1 2AB23-0CA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * * * * * * * [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] of 240 V without line commutating reactor SE6400-5AA00-0BP0

5 Issue 10/06 Input voltage range 1 AC 200 V 240 V, ± 10 % (Unfiltered) Order No. 6SE6420-2UC11-2AA1 2UC12-2UC13-7AA1 2UC15-2UC17-2UC21-1BA1 2UC21-5BA1 2UC22-2BA1 2UC23-0CA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * * * * * * * [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] Input voltage range 3 AC 200 V 240 V, ± 10 % (with built in Class A Filter) Order No. 6SE6420-2AC23-0CA1 2AC24-0CA1 2AC25 - [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] of 240 V without line commutating reactor. 6SE6400-5AA00-0BP0 187

6 Issue 10/06 Input voltage range 3 AC 200 V 240 V, ± 10 % (Unfiltered) Order No. 6SE6420-2UC11-2AA1 2UC12-2UC13-7AA1 2UC15-2UC17-2UC21-1BA1 2UC21-5BA1 2UC22-2BA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * * * * * * [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] Order No. 6SE6420-2UC23-0CA1 2UC24-0CA1 2UC25- [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] of 240 V without line commutating reactor SE6400-5AA00-0BP0

7 Issue 10/06 Input voltage range 3 AC 380 V 480 V, ± 10 % (with built in Class A Filter) Order No. 6SE6420-2AD22-2BA1 2AD23-0BA1 2AD24-0BA1 2AD25-2AD27-2AD31-1CA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * * * * [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] of 400 V without line commutating reactor. 6SE6400-5AA00-0BP0 189

8 Issue 10/06 Input voltage range 3 AC 380 V 480 V, ± 10 % (Unfiltered) Order No. 6SE6420-2UD13-7AA1 2UD15-2UD17-2UD21-1AA1 2UD21-2UD22-2BA1 2UD23-0BA1 2UD24-0BA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * * * * * * [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] Order No. 6SE6420-2UD25-2UD27-2UD31-1CA1 [kw] [hp] Output Power [kva] Input Current 1) [A] Output Current [A] Fuse [A] Recommended 3NA For UL specified * * * [mm 2 ] [awg] [mm 2 ] [awg] [kg] [lbs] of 400 V without line commutating reactor SE6400-5AA00-0BP0