Model: AP-32H ADC+DAC Headphone Amplifier

Size: px

Start display at page:

Download "Model: AP-32H ADC+DAC Headphone Amplifier"

Domenic Evans
5 years ago
Views:

1 Model: AP-32H ADC+DAC Headphone Amplifier Dear Friends, Thank you for purchasing BRIK AP-32H, you can find content as below in the box. BRIK AP-32H x 1 unit USB Cable x 1pc BRIK 12V Adaptor x 1pc BRIK Disc x 1pc(included driver.) BRIK User Manual. Key Feature DAC Support, playback resolution 32bit/384KHz ADC recording resolution 24bit/384KHz Support 2 Headphone Output with Volume Control USB B type input x 1 Golden-Plated RCA Analog input x 1 (Recording) Metal housing and Aluminum front panel of Silver or Black. Miniature size of W 140 x H 48 x D 160 mm, 1,100g approx.. AP-32H ships with Windows & Mac drivers that have to be installed on your computer. NOTE: Mac OS DO NOT NEED TO INSTALL DRIVER. An extension 12V power supply is included. ATTENTION 1. Turn off AP-32H: Please turn off the power button of AP-32H, instead of plugging out USB cable from computer directly for protecting your PC. 2. Note for choosing recording software: Please make sure recording software can support 384Khz sample rate with seller. 1

2 // INDEX// Page Subject Technical Specification of BRIK AP-32H Front Panel Environment Rear Panel Environment 03~ Install driver of AP-32H Uninstallation Guided Instruction 07~ Suggested software to execute Playback with AP-32H Suggested software to execute Recording with AP-32H 2

3 Technical Specification BRIK AP-32H BRIK AP-32H Power Output 32ohm x 2 total 400mW S/N 95dB Distortion 0.02% Load impedance 16~600 ohm Frequency Response 20HZ~20KHZ USB Interface USB 2.0 High/full Speed compliant USB Audio Device Class Specification v1.0/2.0 Compliant Line input 1 Set RCA stereo input supported Recording to PC Headphone Analog 44.1Khz, 48Khz, 88.2Khz, 96Khz, Output 176.4Khz, 192Khz, and 384Khz. sample rate support 16, 24 bit & 32bit 2 Channel Front Panel Environment 1 Volume Control for 2 headphone output. 2 On/Off Switch on front, power LED will glow when power on mm headphone jack x 2 on front panel of AP-32H. 3

4 Rear Panel Environment 1 12V Power supply, 2.1mm tip jack supply connector. 2 PC Signal input, connect a 2.0 USB cable, B type USB connector. 3 RCA stereo input supported recording to PC. Please read this User Manual before operating the machine to ensure its best performance and your safety. Install driver of AP-32H 1. Please execute driver of AP-32H on the BRIK CD-ROM. 2. Installing process Power on AP-32H and connect it to the PC, driver will start automatic installation as following: AP-32H Driver Installation based on a Windows-based PC Open the driver folder and select SETUP.EXE, installation START. (Pic.1) 4

5 Click NEXT STEP to proceed, as PIC.2 (PIC.2) Check in the column. Click Next to move on installation, as PIC.3. (PIC.3) 5

6 Message window states installation status and please click on Next for next step. (PIC.4) (PIC.4) Please reboot PC and finish installation, PIC.5 (PIC.5) 6

7 After reboot, you can find icon of BRIK AP-32H(PIC.6) on Device Manager of the PC, the installation is finished. (PIC.6) PLEASE NOTE: The Wizard Installation appearance may be slightly different depends on XP/Vista and Windows 7 system environment. **Uninstallation Guided Instruction: Insert Driver Disk, power on AP-32H and connect to the PC Enter Control panel of the PC Click on Programs(uninstall a program) Choose BRIK AP-32H and execute uninstallation. Suggested software to execute Playback with AP-32H. -- FooBar 2000 ( downloading and installing FooBar Software, which can support many music formats and high sample rate. -- Use FooBar with WASAPI under Windows SP1 Vsita or newer(e.g.windows 7), it needs to download DLL s of WASAPI or ASIO output support from FooBar 2000 website. Here are links for component of WASAPI Output support and ASIO output support: WASAPI ASIO 7

(PIC.7 as WASAPI for example, you can use ASIO Output support as well) -- And,

8 -- Please key in.rar or. zip behind when you re saving component. -- Please copy all files and paste it to FooBar2000 main folder in your hard disk. (PIC.7 as WASAPI for example, you can use ASIO Output support as well) -- And, restart FooBar and go for Preference Playback Output Window and set parameter accordingly. (PIC.8) 8

9 (PIC.9 As WASAPI for example, choose one of them (WASAPI PUSH or Event,BRIK AP-32H) or choose ASIO:ASIO4ALL v2, below PIC.10) (PIC.10) 9

10 Suggested software to execute Recording with AP-32H. --Suggested Recording Software Magix Samplitude Pro --Please execute Magix Samplitude Pro as PIC.11 (PIC.11) -- Click File -> Record and there will be a window shown up as PIC.12 10

11 (PIC.12) -- Please adjust parameters per your demand accordingly and start making your own 384Khz digital music files. -- You can press monitor(green circled) and listen recording situation by AP-32H(phone jack), besides, you can also check recording volume by Visualizer (green circled) -- Here is example of BRIK test 384KHz Flac music file for reference and have a great time with BRIK AP-32H! 11

RAL-DSDHA1 Setup Guide

RAL-DSDHA1 Setup Guide Rev. 1.0 12/Feb/2013 RATOC Systems, Inc. www.ratocsystems.com Osaka, Japan Index 1. Introduction... 3 1-1.Features...3 2. System requirements... 4 2-1. PC running on Windows 8,7,Vista,XP(SP2