ZU500T / ZH500T / ZW500T / ZX500 / ZU500TST / ZX500TST

Transcription

1 ZU500T / ZH500T / ZW500T / ZX500 / ZU500TST / ZX500TST Contents Product Description Cabinet Dimensions Installation Requirements Image Size & Projection Distance Back & Control Panel PC Control Codes LAN Control Ports IR Codes Product Description ZU500T ZH500T ZW500T ZX500 ZU500TST ZX500TST Resolution WUXGA 1920 x p 1920 x 1080 WXGA 1280 x 800 XGA 1024 x 768 WUXGA 1920 x1200 XGA 1024 x 768 Brightness 5000 lm 5000 lm 4500 lm 5500 lm 5000 lm 5500 lm Dimensions (mm) (WxDxH, excluding feet) 405 x 387 x 129 mm( x x 5.08 ) Weight 10.7 Kg ( lb) 11.3 Kg ( lb) Noise (Eco) 28 db 28 db (Eco) Power Consumption Normal : 370W±15%@220V ECO : 250W±15%@220V Normal : 470W±15%@220V Eco : 310W±15%@220V BTU/hr (max.) 1,500 BTU/hr min BTU/hr@110V/220V Projection Lens F/2.3~3.01; f=17.63~31.36mm, 1.6x Manual Zoom F/2.49; f=11.66mm, Fixed Zoom Throw Ratio 1.2~ ~ ~ ~ Installation Manual 01

2 Cabinet Dimensions (7.97 ) (7.97 ) (15.94 ) (15.61 ) (15.24 ) (6.26 ) 67.50(2.66 ) (5.08 ) 74.35(2.93 ) 30.00(1.18 ) 36.11(1.42 ) (5.20 ) (6.38 ) M4(8mm length) (4.92 ) (12.95 ) (5.51 ) (4.63 ) (6.69 ) 68.50(2.70 ) (12.09 ) Unit : mm (inch) Installation Manual 02

3 Installation Requirements Adjusting the projector position 360 degree free orientation operation Installation Portrait mode Installation Manual 03

4 air inlet air outlet air inlet Clearance >50cm Clearance >50cm Keep the area between the bottom case and feet unobstructed >50cm >50cm Clearance >100cm Clearance >100cm Keep the area between the bottom case and feet unobstructed Clearance >50cm Clearance >100cm Clearance >50cm Keep the area between the bottom case and feet unobstructed Note : 1inch=25.4mm Installation Manual 04

5 ZU500T / ZH500T / ZW500T / ZX500 Image Size & Projection Distance & Diagrams Width 10% Hs Lens shift position 10% Hs Height 20% Vs (Hd) center of lens (D) Vertical Shift Range (Vs) Horizontal Shift Range (Hs) XGA 10% ±10% WXGA 20% ±10% 1080p 25% ±10% WUXGA 20% ±10% image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height Wide Tele Wide Tele Wide Tele Wide Tele 30" NA NA " XGA 4:3 150" " " NA NA " NA NA image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height Wide Tele Wide Tele Wide Tele Wide Tele 30" NA NA " WXGA 16:10 150" " " NA NA " NA NA image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height Wide Tele Wide Tele Wide Tele Wide Tele 36" NA NA " P 16:9 150" " " NA NA " NA NA This table is for user s reference only. Installation Manual 05

6 image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height Wide Tele Wide Tele Wide Tele Wide Tele 36" NA NA " WUXGA 16:10 150" " " NA NA " NA NA ZU500TST / ZX500TST Image Size & Projection Distance & Diagrams Width 10% Hs Lens shift position 10% Hs Height 20% Vs (Hd) center of lens (D) Vertical Shift Range (Vs) Horizontal Shift Range (Hs) XGA 10% ±5% WUXGA 13% ±5% XGA 4:3 image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height " " " " " " WUXGA 16:10 image size Screen Size WxH Projection Distance (D) set (Hd) Diagonal Width Height Width Height " " " " " " This table is for user s reference only. Installation Manual 06

7 Back Panel Microphone connector 2. Audio In connector 3. VGA In/ YPbPr connector 4. Audio Out connector 5. VGA Out connector 6. HDMI 1connector 7. HDMI 2/MHL connector 8. RS232C connector 9. USB-B mini connector 10. USB Power Out (5V A) Connector 11. HDBaseT connector (Depending on Model) 12. RJ Power Socket 14. 3D Sync Out (5V) connector 15. Wired Remote connector V Trigger connector 17. Kensington Lock Control Panel On/Standby LED 2. Enter 3. Temp LED 4. Lamp LED 5. Menu 6. Source 7. Four Directional Select Keys 8. Power/Standby button 9. IR Receiver Installation Manual 07

8 PC Control Codes RS232 protocol function list Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Write Command ~ X X X X X n CR Lead Code Projector ID Command space variable carriage return 00~99 (00: All projectors) 000~999 0~9999 Response Format Pass: P Fail: F Read Command ~ X X X X X n CR Lead Code Projector ID Command space variable carriage return 00~99 (00: All projectors) 000~999 0~9999 Response Format Pass: O k n Fail: F Variable System Automatically Send I N F O n Variable Note: There is a <CR> after all ASCII commands. 0D is the HEX code for <CR> in ASCII code. Character to HEX table Character HEX ~ 7E Space 20 CR (Enter) 0D e.g. ASCII to HEX RS232 Command ~ CR HEX 7E D Installation Manual 08

9 PC Control Codes RS232 protocol function list Main Menu Sub Menu Setting Level 4 Write Command Response Read Command Response CMD Set Para. Fail Pass CMD CMD Value Fail [None] F P 0 Bright 2 F P 2 Presentation 1 Picture Color Mode Movie ~ X X F P ~ X X F O k 3 srgb 4 F P 4 Blending 19 F P 19 DICOM SIM. 13 F P 10 User 5 F P 5 0 F P Function PIP ~ X X PBP 2 F P HDMI1 7 HDMI2 15 F P 8 Main Source Dongle ~ X X F P ~ X X F O k 9 VGA 5 F P 2 HDBaseT 2 16 HDMI1 7 HDMI 2 15 F P 8 Sub Source Dongle ~ X X F P ~ X X F O k 9 VGA 5 F P 2 Screen PIP - PBP Settings HDBaseT 2 16 Top Left Top Right 2 F P Bottom Left 3 F P Location Bottom Right 4 F P ~ X X PBP, Main Left 5 F P PBP, Main Top 6 F P PBP, Main Right 7 F P PBP, Main Bottom 8 F P Large Size Medium ~ X X F P Small 3 F P Swap ~ X X Speaker ~ X X On Audio Out ~ X X On Microphone ~ X X Volume On Mute F 0 ~ X X 8 0 ~ X X O k On F 1 Volume 0-15 ~ X X 8 1 0~15 F P Microphone Volume 0-30 ~ X X 9 3 0~30 F P EQ 100, 300, 800, 2700, 7000Hz [Open Info Menu] ~ X X [Close Info Menu] Model Name ~ X X F O k n SNID ~ X X F O k nnnnnnnnnnnnnnnn Source (Main / Sub) ~ X X F O * Check "Input Source" read above k Main Source only Main Source Resolution ~ X X F O k nnnnnnnnnnnn Options Information Sub Source Resolution ~ X X F O k nnnnnnnnnnnn SW Version (DDP/MCU/LAN) ~ X X F O k nnnnnnnnnnnn Aspect Ratio ~ X X F O k n SSI Hours (Normal/Eco) ~ X X F O k nnnnnnn/nnnnnnn IP Address ~ X X F O k nnn_nnn_nnn_nnn Network Status Disconnected 0 ~ X X F O k Connected 1 Remote Code 00~99 Remote Code(Active) 00~99 Other Items Power 0 & 2 ~ X X 0 0 ~ X X F O k Power On 1 Re-Sync ~ X X 0 1 AV Mute 1 F O k 0 ~ X X 0 2 ~ X X On 1 F O k 1 Mute 1 F O k 0 ~ X X 0 3 ~ X X On 1 F O k 1 Freeze Unfreeze ~ X X 0 4 Freeze Standby Mode 0 LD Fail 4 Fan Lock 6 System Auto Over Temperature 7 I N F O Send Color Wheel Unexpected Stop 12 Power Good Error 13 LD NTC (1) Over Temperature 21 System Ready 24 Optoma SVGA 1 Optoma XGA 2 Model Name Optoma WXGA ~ X X F O k 3 Optoma 1080P 4 Optoma WUXGA 5 Software Version ~ X X F O k nnnnnnn Info String 1 F O k abbbbbccddddee (Note*1) Main Source- Resolution 4 F O k # Sub Source Resolution 10 F O k # Information Light Source Mode ~ X X F O k # Standby Power Mode 16 F O k # DHCP 17 F O k # System Temperature 18 F O k # Installation Manual 09

10 PC Control Codes Main Menu Sub Menu Setting Level 4 Remote Control Simulation Power Power 50 F P Up 10 F P Left 1 Enter (for projection 12 F P MENU) Right 13 F P Down 14 F P V Keystone + 15 F P V Keystone - 16 F P Volume - 17 F P Volume + 18 F P Menu 20 F P Zoom+ 32 F P Zoom- 33 F P VGA-1 23 F P AV Mute 24 F P Freeze 30 F P Mode 36 F P Format 37 F P info ~ X X F P Re-sync 4 HDMI 1 42 F P HDMI 2 43 F P Source 47 F P F P 3 53 F P 4 54 F P 5 55 F P 6 56 F P 7 57 F P 8 58 F P 9 59 F P 0 60 F P PIP/PBP 63 F P Geometric Correction 68 F P Hot Key (F1) 70 F P Hot Key (F2) 7 Hot Key (F3) 72 F P Exit 74 F P Write Command Response Read Command Response CMD Set Para. Fail Pass CMD CMD Value Fail Power Light Source Life Input Source Firmware Version Display Mode a b b b b b c c d d d d e e a=0 Power Light Source Life =nnnn cc=00 None # # # # ee=00 None a=1 Power On Calucalte by each mode formula cc=01 DVI ee=01 Presentation cc=02 VGA1 cc=03 VGA2 cc=04 S-Video cc=05 Video cc=06 BNC cc=07 HDMI1 cc=08 HDMI2 cc=09 Wireless cc=10 Compnent cc=11 Flash drive cc=12 Network Display(Presenter) cc=13 USB Display cc=14 HDMI3/Dongle cc=15 DisplayPort cc=16 HDBaseT ee=02 Bright ee=03 Movie ee=04 srgb ee=05 User ee=06 User2 ee=07 Blackboard ee=08 Classroom ee=09 3D ee=10 DICOM SIM. ee=11 Film ee=12 Game ee=13 Cinema ee=14 Vivid ee=15 ISF Day ee=16 ISF Night ee=18 Blending Installation Manual 10

11 LAN Control Ports Protocols Crestron PJ-Link AMX Device Discovery Telnet Http Extron Port # IR Codes Customer code 32CD Key Description Key code printing-key definition 1 Power 2E 2 Power On 2 On 3 PIP/PBP Menu 78 PIP/PBP 4 Keystone 7 Geometric Correction 5 Function 2 27 F2 6 Function 1 26 F1 7 Display mode menu on/off 95 Mode 8 Up key for OSD when OSD on C6 Up arrow 9 AV Mute 3 AV Mute 10 Left key for OSD when OSD on C8 Left arrow 11 Enter C5 Enter 12 Right key for OSD when OSD on C9 Right arrow 13 Information 25 Info. 14 Down key for OSD when OSD on C7 Down arrow 15 Laser pointer trigger, press to emit laser N/A Laser 16 Input source selection when OSD off 18 Source 17 Function 3 66 F3 18 Auto adjustment for phase, tracking, size, position when OSD off 4 Re-Sync 19 OSD menu on/off 88 Menu 20 Volume Control + 9 Volume + 21 Volume Control - 0C Volume - 22 D Room + 8 D Zoom + 23 D Room - 0B D Zoom - 24 Format 15 Format 25 Freeze 6 Freeze 26 Mode 1~ ~ All 32CD 28 Input source select VGA1 8E 1/VGA1 30 Input source select HDMI1 16 3/HDMI1 31 Input source select HDMI2 9B HDMI2 32 Input source select HDBasT 70 4/HDBaseT 38 3D Menu 89 0/3D 39 HDMI3 (Dongle) 98 HDMI3 40 Function 3 66 F3 Installation Manual 11