Owner s Manual. For FAQs and more information, please visit: (US) Mon-Fri 9am-5pm (PT)

Size: px

Start display at page:

Download "Owner s Manual. For FAQs and more information, please visit: (US) Mon-Fri 9am-5pm (PT)"

Colin Morgan
5 years ago
Views:

For FAQs and more information, please visit: www.seenebula.

1 For FAQs and more information, please visit: (US) Mon-Fri 9am-5pm (PT) Owner s Manual SM-A549-V01

2 Table of Content Safety Instructions 01 Safety Instructions 04 What s Included 04 Overview 09 Get Started 11 Settings 14 Enjoy 17 Specifications 18 Troubleshooting 19 Notice 21 Trademarks 21 Warranty Read and understand all instructions before you use this device. Do not make any changes or settings that are not described in this manual. If physical injury, loss of data or damage is caused by failure to follow instructions, the warranty does not apply. Setup This device is exclusively for indoor use. To reduce the risk of fire and/or electric shock, do not expose the device to rain or moisture, and objects filled with liquids, such as vases, should not be placed on the device. Do not place this device on soft surfaces such as tablecloths or carpets. Otherwise the device could catch fire. Do not place this device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field. To prevent overheating, do not block or clog the ventilation openings. Never place this device in a confined space. Always leave enough space around the device for ventilation. Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. When the device is running for a long period of time, the surface becomes hot. Shut it down immediately and unplug the power cord. Only after the device has cooled down, you can continue to operate. Always handle the device with care. Avoid touching the lens. Never place heavy or sharp objects on the device or the power cord. To avoid electric shock, do not disassemble. Use attachments or accessories specified by the manufacturer only. Avoid extreme vibrations. It may damage the internal components. Do not allow children to handle the device without supervision. Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions: a) if the device is moved from a cold to a warm area; b) after a cold room is heated; c) when the device is placed in a damp room. To avoid any moisture, seal the 01

3 device in a plastic bag before moving it to another room, and wait for one to two hours before you take it out of the bag. Charge the device regularly. Do not store the device with a completely discharged battery. Power Supply Cleaning Use only the provided power adapter. Power off the device before removing the power supply from the socket. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device. Power off the device and remove it from the power supply before cleaning the surface. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coating film on the lens. Unplug this device during lightning storms or when unused for a long period of time. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Before you make or change any connections, ensure that all devices are disconnected from the power outlet. Never touch the mains cable of the mains connection with wet hands. Hearing Safety To avoid hearing damage, do not listen for extended periods at high volume. Set the volume at a safe level. Use lens cleaning paper to clean the lens of the projector. Repairs Do not make any repairs to the device yourself. Only have your device repaired by an authorized service center. Improper maintenance can result in injuries or damage to the device. Class II equipment symbol Battery This symbol indicates that the unit has a double insulation system. Do not replace the built-in battery yourself. Contact an authorized service center to replace it. Laser Safety The remote control contains coin type batteries, which can be swallowed. Keep the batteries out of reach of children. Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. When the remote control is not used for a long period of time, remove the batteries. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries contain chemical substances, they should be disposed of properly. CLASS 1 LASER PRODUCT IEC :2014. Complies with IEC 62471:2006 Risk Group 2. Caution: Possibly hazardous optical radiation emitted from this device. Do not stare at operating beam. The bright light may hurt your eyes

4 What s Included 2. Rear View Main unit Remote control with batteries 6 7 NEBULA MARS Owner s Manual 1 DC IN Connect to power supply Power Adapter Power cord Manual 2 HDMI Connect to a playback device with HDMI output Overview 3 USB 3.0 Connect to a USB storage device 1. Front View Charge a USB device as a power bank 4 AUDIO OUT Lens 2 Handle 3 Lens cover Slide down / up to power on / off 4 Loudspeaker Connect to headphone or external speaker 5 Infrared Receiver 6 Air ventilation (outlet) 7 Air ventilation (inlet) 8 RESET 04 05

5 3. Top View 4. Bottom View Tripod socket 1 LED indicators Power level 2 Navigation buttons 5. Remote Control Navigate menus or adjust the selected contents Press to confirm a selection or entry Press and hold to adjust focus Pause / resume during play Volume up / down 5 Return to a previous menu 6 Press to access the home menu Press and hold to to set 3D and picture mode in the pop-out window 06 07

6 1 Get Started 2 3 Power on / off or switch to standby Manually adjust focus Press to confirm a selection or entry Press and hold to adjust focus 1. Placement Place this device on a stable, flat table in front of the projection surface. For best results, the projection surface shall be white and flat. The distance between the device and the projection surface must be a minimum of 0.5 meters (19.7 inches) and a maximum of 3 meters (118 inches). Pause / resume during play 4 Press to access the home menu Press and hold to to set 3D and picture mode in the pop-out window 5 Access more options during play (Available depend on the source) 6 Navigation buttons 7 Navigate menus or adjust the selected contents Return to a previous menu 8 Volume down / up T It is unnecessary to tilt it towards the projection surface. You can correct the projection image with the built-in keystone correction. The distance between the device and the projection surface determines the projection image size

7 2. Prepare the Remote Control Settings 1 For the first time use, remove the protective tab to activate the remote control batteries. 2 To replace battery, slide to open the battery compartment, insert new batteries with correct polarity (+/-) as indicated, and close the battery compartment. 3. Power On 1 Connect the device to the mains by using the provided power adapter and power cord, the built-in battery will be charged and the LED indicators will light on. Finish the main settings when you power on the device for the first time. 1. Network This device can be connected to the Internet via a wireless (Wi-Fi) connection. 1 Press to access the home menu, select [Network] and press. 2 Follow the on-screen instruction to complete the connection. 2. Bluetooth You can play audio through your Bluetooth device if successfully paired with this device. 3 1 DC IN 1 Press to access the home menu, select [Bluetooth] and press. 2 Follow the on-screen instruction to complete the connection Projector [Auto Keystone Correction] Enable / disable auto keystone correction. [Keystone Correction] Correct keystone manually. Default value is 0. 2 Press on remote control or slide down the lens cover to power on. 3 Turn the device towards a suitable projection surface or wall. 4 To focus the image, press (or press and hold ) and then. T Fully charge the built-in battery before using for the first time, which will prolong the battery lifespan. [Project mode] [Front Ceiling] [Rear Ceiling] [Front] [Rear] [Manual Focus] The device is hanging from the ceiling in an upside down position. The image is rotated by 180 degrees. The device is hanging from the ceiling in an upside down position behind the projection surface. The image is rotated by 180 degrees and horizontal mirrored. The device is located in front of the projection surface. The device is located behind the projection surface. Manually adjust focus

8 4. App Manager 6. Recovery 1 Press press. to access the home menu, select [APP Manager] and 2 Select an app and check the current version, open or force stop, check the storage used or clear data, or uninstall it. Press to access the home menu, select [Other] > [About] > [Recovery]. All data on the built-in storage will be erased. 7. 3D Setting & Picture Mode 5. Other Press and hold to set 3D and picture mode in the pop-out window. Press to access the home menu, select [Other] and press. [3D Setting] Off / Auto / Top-Bottom / Side By Side [General] [Language] Select an on-screen display language. [Keypad Tone] Turn on / off the keypad tone. [Automatic Sleep Interval] 5 min / 15 min / 30 min / 1 hour / Never [Background] Select a background. [Date&Time] [Automatic Date&Time] Enable / disable automatic date and time. [Sync Invert] [Picture Mode] [Color Temperature] [Overall Brightness] [RGB Brightness] [Contrast] [Wall Color] Enable / disable 3D sync invert. Standard Mode / Battery Mode / Eco Mode / Highlight Mode / User Mode Normal / Cool / Warm Customize the settings when you select [User Mode] under [Picture Mode]. [Date] [Time] [Select time zone] [Use 24-hour format] Manually set date. Manually set time. Select time zone. Select 24-hour / 12-hour format. [Upgrade] [Check Update] Check if it is the latest version. Follow the on-screen instructions to upgrade the software version

9 Enjoy 3. Connect Headphones 1. Connect to HDMI Playback Devices 1 Before connecting headphones, turn down the volume on this device. This device supports connections with various HDMI playback devices such as TV stick, DVD player, set-top box (STB), game machine or other devices. 1 Connect this device to an HDMI playback device with an HDMI cable (not provided). 2 Press to access the home menu, select [HDMI] and press. 2 Connect headphones (not provided) into the AUDIO OUT connector of the device to enjoy music through the headphones. 4. Screen Mirroring You can mirror the screen of your smartphone or tablet onto the projection surface wireless. HDMI 1 Make sure that both your smartphone or tablet and this device are connected to the same wireless (Wi-Fi) network. 2 Activate screen mirroring on your smartphone or tablet and select this device to connect. 3 Once connected, your mobile device s screen will be displayed on the projection surface. 2. Connect to USB Storage Device With this device, you can enjoy music, video, and pictures that are stored on a USB storage device. 1 Plug the USB storage device to the USB 3.0 socket of the device. 2 Select a file, then press. 3 To stop play, press. USB

10 5. Apps Specifications Once connected to a wireless network, you can access online services, enjoy movies, music and pictures, and browse internet. Apart from the apps installed, you can also install any other apps. 1 Press to access the home menu. 2 Select an Internet service, and press. 6. Charge Your Devices This device can also be used as a power bank to charge your USB devices. Specifications are subject to change without notice. Power supply: DC 19V Power consumption: < 57W Standby power consumption: < 0.5W Display technology: 0.45inch 1280*800p DLP Light source: RGB LED Projection image size: inch Resolution: 1280 x 800 Pixel USB 3.0 Brightness: 500 ANSI Lumens Contrast ratio: 1000:1 Throw ratio: 1.2 Throw distance: 0.5m to 3m Speaker drivers: 10W x 2 Wi-Fi: IEEE802.11b/g/n (2.4G/5G) Bluetooth version: V4.0 Built-in battery type: Li-Polymer Capacity: mah 3.8V Operating time: 3 hours Remote control batteries: CR2032 x 2 Recommended ambient: 5 C to 35 C / 41 F to 95 F Relative humidity: 15% ~ 85% (non-condensing) Storage temperature and humidity: < 65 C / 149 F, < 90% humidity Dimensions (W*H*D): 122 * 138 * 178 mm / 4.8 * 5.4 * 7 in Weight: 1,890 g / 66.7 oz 16 17

11 Troubleshooting Notice 1 Fail to power on by the remote control? Make sure that the device is connected to the power supply. Slide down the lens cover. 2 Fail to power on by sliding down the lens cover? Make sure that the device is connected to the power supply. Slide up the lens cover and wait for 10 seconds, then try again. 3 The remote control doesn t work? FCC notice This device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the partly responsible for compliance could void the user s authority to operate the equipment. Remove the protective tab to activate the remote control batteries. 4 Blurred image? Press on remote control (or press and hold on the device) and then 5 No 3D effect? to focus the image. Wear a pair of DLP 3D glasses. Press and hold and select [3D Setting] > [Auto] in the pop-out window. 6 Reversed projection image? Press to access the home menu, select [Project mode] and switch to a correct state. 7 Cannot connect to a Wi-Fi network? Refresh the list of available networks and retry. Reboot the wireless router or the device and retry. 8 Cannot paired with smartphone via Bluetooth? This device cannot be used as a Bluetooth speaker. It can only pair with an external Bluetooth speaker or headphone. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter

12 Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Trademarks Canada: This Class B digital apparatus complies with Canadian ICES-003. Remarque à l intention des utilisateurs canadiens: HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. Cet appareil numérique de la classe B est conforme à la norme NMB- 003 du Canada. Care of environment The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Manufactured under licence from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Other trademarks and trade names are those of their respective owners. Warranty 30-Day Money-Back Guarantee for Any Reason You may return your undamaged product and packaging within 30 days of purchase to receive a FULL REFUND for any reason. If the reason for return isn t quality-related, the customer must pay for the return shipping. 12-Month Warranty for Quality-Related Issues Nebula s products are warrantied to be free from material and workmanship defects for 12 months from the date of purchase. Within this period, Nebula will provide a replacement and cover any return shipping costs for products that fail in normal use. Please Note: Any provided shipping labels must be used within 20 days from the date they re issued by Nebula Support

Mars Lite. Owner s Manual

Mars Lite. Owner s Manual For FAQs and more information, please visit: www.seenebula.com support@seenebula.com +(800) 988 7973 (US) Mon-Fri 9:00-7:00 (PT) Anker Technology Co., Limited. All rights reserved. NEBULA and the NEBULA