Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
|
|
|
- Wilfrid Warner
- 5 years ago
- Views:
Transcription
1 96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A Coding key, snap-on type Item No. Pack. Unit Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Accessories, 734 Series Item No. Pack. Unit Item No. Pack. Unit Male header, 100% protected against mismating, Coding key, snap-on type Double-deck male header without support, 100% protection against mismating, Coding key, to be snapped above top level Note: These connectors shall only be mated or unmated at voltages below 4V and in the "no load" condition. For mating and unmating at low power values, please request data Coding key, to be snapped in bottom level, Drilled hole diameter: mm L,8 < < < 1x1 < <_ 10,3_ 4,5 < < <_ 8,5 L,8 < < < < 1x1 3,8 < <_ 8,5_ <_ 10,3_ <_ 9,3,8 < 3 <_14,5 3,6 (5)<9,3 _ 16,8 L = (pole no. 1) x pin spacing mm L = (pole no. 1) x pin spacing mm = (pole no./ 1) x pin spacing mm
2 Double-Deck Male Headers with Solder Pins; Male Connectors with CAGE CLAMP Connection, Pin spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U mm AWG 8-14* mm AWG 8-14* 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 10 A 300 V, 10 A L 7 mm / 0.8 in L 7 mm / 0.8 in 97 Accessories, Item-Specific Accessories, 734 Series Item No. Double-deck male header with support, / / / / / / / / / / / / / / / / / / / Coding key,, to be snapped in bottom level Coding key,, to be snapped above top level Note: These connectors shall only be mated or unmated at voltages below 4V and in the "no load" condition. For mating and unmating at low power values, please request data. Drilled hole diameter: mm Item No. Item No. Male connector with CAGE CLAMP Operating lever, for male connectors (4x5) Operating tool, with partially insulated shaft, (.5x0.4)mm blade Test pin, 1 mm Ø, with solder connection for test cable Strain relief plates, see page 113 Male connector with CAGE CLAMP and fixing flanges / / / / / / / / / / / / / / / / / / / Screw with nut, M x 1 mm (x100) 1 16 (40x) Spacing 3.5 mm 10-33/ (40x) Spacing 3.5 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ _,8 3 <_14,5 ( 4,1 0,9 <_ 4,4 ) 3,6 3 < (5)<9,3 (5) _ 16,8 = (pole no./ 1) x pin spacing mm < (7 ) 1,4 <_1 <_ 10,3 * AWG 14: THHN, THWN For technical explanations and abbreviations, see technical section. <_ 10,8 < 1,9 < 13,4,8 L L = (pole no./ 1) x pin spacing mm mm = L 0.45 mm < L ( L _,5 <9, <_ 13,4 5,7 1,5 1 <_ 10,3_ (_7,5 5,5 L = pole no. x pin spacing mm = pole no. x pin spacing mm L = pole no. x pin spacing L 3 = (pole no. 1) x pin spacing mm 1,3 ),75 ) <_ 8,5 <_ 10,8 _,8 L 3
3 98 Female Connectors, Pin spacing 3.5 mm and 3.81 mm mm AWG 8-14* mm AWG 8-14* mm AWG 4-14* 160 V/.5 kv/ 300 V, 10 A U 160 V/.5 kv/ 300 V, 10 A U 160 V/.5 kv/ 10 A 300 V, 10 A 10 A 300 V, 10 A L 7 mm / 0.8 in L 7 mm / 0.8 in L 8 9 mm / 0.33 in S Item No. Pack. Unit Female connector with CAGE CLAMP, with coding fingers Accessories, Item-Specific Accessories, 734 and 734 Series insulated shaft, type 1, (.5x0.4) mm blade Test pin, 1 mm Ø, with solder connection for test cable Strain relief plates, see page 113 Item No. Pack. Unit Female connector with CAGE CLAMP and locking levers, with coding fingers / / / / / / / / / / / / / / / / / / / / Operating lever, for male and female connectors (40x) Spacing 3.5 mm 10-33/ (40x) Spacing 3.5 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ Item No. Pack. Unit Female connector with CAGE CLAMP S and integrated push-buttons, with coding fingers : : : (40x) Spacing 3.5 mm 10-33/ (40x) Spacing 3.5 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ (160x) Spacing 3.81 mm 10-33/ < 13,4 < 1 <_13,4 <8,9 <_ 1 _ 13,8 0,4_ 1 18,6 1,5 < (_ 0,7 < L L = (pole no. x pin spacing) +. mm 18,6 1,75 5,9 L 5,9 < L = pole no. x pin spacing 1,5 0,6 _L L = (pole no. x pin spacing) +.1 mm
4 MULTI CONNECTION SYSTEM MINI HD 100% Protected Against Mismating Male Headers and Female Connectors, Pin Spacing 3.5 mm, 713 Series 160 V/.5 kv/3 160 V/.5 kv/ mm AWG V/.5 kv/3 L 6-7 mm / in 99 Pole No. Item No. Pack. Unit Male header, -row, (0.8 x 0.8) mm straight solder pins, Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Male header, -row, (0.8 x 0.8) mm angled solder pins, Female connector with CAGE CLAMP, -row, with coding fingers to be cut off, 6 (3 x ) (4 x ) (5 x ) (6 x ) (7 x ) (8 x ) (9 x ) (10 x ) (11 x ) (1 x ) (13 x ) (14 x ) (15 x ) (16 x ) (17 x ) (18 x ) Coding pin carrier (4x5) 6 (3 x ) (4 x ) (5 x ) (6 x ) (7 x ) (8 x ) (9 x ) (10 x ) (11 x ) (1 x ) (13 x ) (14 x ) (15 x ) (16 x ) (17 x ) (18 x ) Coding pin carrier (4x5) 6 (3 x ) (4 x ) (5 x ) (6 x ) (7 x ) (8 x ) (9 x ) (10 x ) (11 x ) (1 x ) (13 x ) (14 x ) (15 x ) (16 x ) (17 x ) (18 x ) Accessories, 713 Series insulated shaft, type 1, (.5 x 0.4) mm blade Strain relief plate 11 mm wide mm wide mm wide mm wide ,6,6,6,6 Remove the coding finger related to the coding pin! L = [(pole no./) -1] x pin spacing + 5 mm L = [(pole no./) -1] x pin spacing + 5 mm L = [(pole no./) -1] x pin spacing + 5 mm For technical explanations and abbreviations, see technical section.
5 100 MULTI CONNECTION SYSTEM MINI HD 100% Protected Against Mismating Male Headers and Female Connectors with Levers Pin Spacing 3.5 mm; 713 Series 160 V/.5 kv/3 160 V/.5 kv/ mm AWG V/.5 kv/3 L 6-7 mm / 0.5 in Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit Male header, -row, with levers, (0.8 x 0.8) mm straight solder pins, Male header, -row, with levers, (0.8 x 0.8) mm angled solder pins, Female connector, -row, with levers, with CAGE CLAMP, with coding fingers to be cut off, 6 (3 x ) / (4 x ) / (5 x ) / (6 x ) / (7 x ) / (8 x ) / (9 x ) / (10 x ) / (11 x ) / (1 x ) / (13 x ) / (14 x ) / (15 x ) / (16 x ) / (17 x ) / (18 x ) / Coding pin carrier (3 x ) / (4 x ) / (5 x ) / (6 x ) / (7 x ) / (8 x ) / (9 x ) / (10 x ) / (11 x ) / (1 x ) / (13 x ) / (14 x ) / (15 x ) / (16 x ) / (17 x ) / (18 x ) / Coding pin carrier (3 x ) / (4 x ) / (5 x ) / (6 x ) / (7 x ) / (8 x ) / (9 x ) / (10 x ) / (11 x ) / (1 x ) / (13 x ) / (14 x ) / (15 x ) / (16 x ) / (17 x ) / (18 x ) / Accessories, 713 Series insulated shaft, type 1, (.5 x 0.4) mm blade Strain relief plate 11 mm wide mm wide mm wide mm wide ,6,6,6,6 Remove the coding finger related to the coding pin! L = [(pole no./) 1] x pin spacing mm L = [(pole no./) 1] x pin spacing mm L = [(pole no./) 1] x pin spacing + 1 mm
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
1-Conductor Female Connector with Levers Pin Spacing: mm MCS MAXI 16
-Conductor Female Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Intuitive and tool-free lever actuation Universal connection for all conductor types Push-in termination of solid or ferruled conductors
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
MULTI CONNECTION SYSTEM Product Overview
MULTI CONNECTION SYSTEM Product Overview MCS MULTI CONNECTION SYSTEM Product Overview Sorted by Pin Spacing 2.5 mm MICRO* mm, 3.81 mm MINI 100% Mismating Protection mm MINI HD* mm MINI SL screw 714 Series
Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
Female connector; 2-pole; pin spacing 5 mm / in; codable; only 1 locking latch; with coding finger; with latch
Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only locking latch; with coding finger; with latch Item No: 23-02/026-000 Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS For the very first time, sensor/actuator wiring is pluggable between
09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
Item No.: /
Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled
WINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
Electrical Interconnection
Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
Data sheet... OMNIMATE Power - series BL/SL 7.62HP BLZ 7.62HP/04/180LR SN BK BX
Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC)
Electrical Interconnections. Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2012/2 1/2/5
Electrical Interconnections Supplementary Catalog to Full Line Catalogs, Volumes /2/ Edition 202/2 /2/ The new items in this catalog supplement products found in the following main catalogs /2/ Volume
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
Powermate Range pitch 10.16
Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9
VARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
Modular PCB terminal block; 2 solder pins/pole; 1-pole; pin spacing 5/5.08 mm / 0.2 in; with push-button
push-button - Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole; pin spacing 5/508 mm / 02 in; with push-button Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole;
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
FOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
IDC Field Wireable eurofast & picofast Connectors
Advanced Connection Solutions for Manufacturers Worldwide! IDC Field Wireable eurofast & picofast Connectors picofast Field Wireable IDC Connector eurofast Field Wireable IDC Connector Overview Connection
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Applications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
V.35 - Interface connectors
V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications 221 Series Compact Lever Connectors 221 Series - 4mm² 0.2-4mm 2 solid & stranded 0.14-4mm 2 fine-stranded 450 V/4 kv/2
Data sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX
OMNIMATE Signal - series /S2L 3.50-2-row High-temperature-resistant, straight, 2-tier male connector for all common soldering methods. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder
Model 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram
2704 11-05 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 21 22 20
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
Connectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
PC/104, PC/104-Plus %ASYç3TACKINGçWITHç0RESS lt 160
160 PC/104, Contents Introduction 162 Overview 163 The Standard 164 166 167 PC/104 168 170 Accessories: 173 161 Introduction PC/104, Highest Quality for Established Form Factor PC/104 and is a standard
ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
ODU-MINI-SNAP. Series S - IP50 and IP68 FP-Locking Concept Keying with Insulation Body. Series S
OU-MINI-SNAP Series S - IP and IP68 FP-Locking Concept Keying with Insulation Body Series S OU-MINI-SNAP Series S The Push-Pull Locking Principle: FP Locking roove Conical Sleeve Locking Fingers Outer
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
Amphenol LTW Innovation in Waterproof Solution
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Sales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
for a perfect electrical installation. The range of rail-mounted terminal blocks
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
CONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
revos revos Industrial Multipole Connectors 3 48 pole in metal housing Program for Tough Tasks
revos Industrial Multipole Connectors 3 8 pole in metal housing Program for Tough Tasks Heavyduty industrial plug connectors for all applications The heavyduty industrial plug connectors revos are classified
Packing density, redefined mm pitch, 2 rows more convenience despite the small pitch
Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 Explanation OMNIMTE Signal acking density, redefined 3.50 pitch, 2 rows more convenience despite the small pitch The two row arrangement of tension
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks
IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V
D-Series High Reliability Circular Connectors
D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors
onlinecomponents.com
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
onlinecomponents.com
Power entry modules without line filter Felcom 64 IEC Appliance Inlet C14 with modular extended Components Plug removal necessary for fuse replacement 6421.005X.XX Appliance inlet Appliance outlet Snap-In
Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV
Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................
(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
ASSEMBLY INSTRUCTIONS for 16 WAY GT MIXED 150/280 SEALED CONNECTION SYSTEM
ASSEMBLY INSTRUCTIONS for 16 WAY GT MIXED 150/280 SEALED CONNECTION SYSTEM NOTE: PLEASE CONTACT YOUR DELPHI SALES REPRESENTATIVE WITH ANY QUESTIONS OR COMMENTS CONCERNING THESE ASSEMBLY INSTRUCTIONS. COMPONENT
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
SMS Series Quick Mating
Quick Mating panel and cable connectors escription The versatile and easy to use SMS Quick Mating panel and cable connectors are a highly cost-effective system approach to solving the constant demand for
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
Quick Selection Guide
Quick Selection Guide Signal Connectors M23 Coupling ayonet Coupling CONINVERS Edition 03/02 Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Number of Contacts (View: mating face) Contact
Conductor and Cable Marking Description and Handling
Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed
Double-deck terminal block; Through/through terminal block; L/L; gray housing
0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Item No: 870-0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Marking Business data Supplier
Accessories Cassette Style Mating Connectors
Description All 19" cassette style converters are equipped with either H11-, H15-, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H- type connector versions
Accessories Cassette Style Mating Connectors
Description All 19" cassette style converters are equipped with either H11, H15, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H- type connector versions
Navigator II INstallatIoN MaNUal For static and PaN/tIlt configurations
Navigator II Installation MANUAL For Static and Pan/Tilt Configurations Document Number: 432-0001-00-12, rev 100 FLIR Systems, Inc., 2008. All rights reserved worldwide. No parts of this manual, in whole
Interfaces Service and Field
Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS
For situations susceptible to interference and safety-related applications
IEC 60947-5-2 Product description Multi-pole shielded circular connectors. Design according to DIN 43651, all-metal construction, used for control and measurement systems. Connection of shielded cables
PANEL ACCESSORIES. Crimping Tools and Ferrules. Wire Cutting and Stripping Tools. Shield Connection System
Panel Accessories PANEL ACCESSORIES Get the job done! In addition to interconnect and automation products, WAGO offers a complete range of accessories designed to make panel building fast and easy. From
Section 2. Connectors Field attachable
E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable 89 SAL M8x1 Connectors Field attachable Nomenclature S A L - 8 - R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
A KYOCERA GROUP COMPANY. ELCO Varicon Input/Output Rack and Panel Connectors
A KYOCERA GROUP COMPANY ELCO Varicon Input/Output Rack and Panel Connectors Contents The Varicon Range......................................................... 2 Introduction to Varicon.....................................................
Environmentally Sealed
Weather-Pack 16 Metri-Pack 19 AMP Superseal 24 Ampseal 16 27 M12 Network 30 DIN Connectors 31 Schlemmer / Din Conduit Sealed 32 Schlemmer / Din Contact Sealed 34 Ideal for applications requiring protection
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
Plugs & sockets. Industrial plugs and sockets - Scame I-1 4. Industrial switched sockets - Scame I-4 5. Distribution assemblies - Scame I-6
I Product page Industrial plugs and sockets - Scame I-1 4 Industrial switched sockets - Scame I-4 5 Distribution assemblies - Scame I-6 Industrial plug adaptors - Scame I-6 Weatherproof domestic switches
MCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013
1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal
AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
![AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]](/thumbs/79/79067902.jpg "AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]")
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings
- Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting
Summary of shell housings and accessories Shell housing A Shell housing D EMC housing
Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing
SAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
- 1 - Product catalogue PCB connection systems PCB terminals Clamping yoke connection LM 5.00 / 5.08 LM 5.00/135
General ordering data Order No. 1715360000 Part designation LM5.00/3/135 OR Version EAN 4008190365240 Qty. 500 pc(s). PCB terminal, Clamping yoke connection, Soldered connection, Clamping range, max.:
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
The Sentinel - Talon-SRX Breakout Board, rev A User s Guide
The Sentinel - Talon-SRX Breakout Board, rev A User s Guide December 13, 2016 - document rev A Thank you for purchasing the the Sentinel Talon-SRX Breakout Board. Within this guide, you will find information
4000 Series Buccaneer
Sealed to IP66 IP68 and IP69K when mated IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks 2, 3,, & 12 pole configuration Power ratings up to 13A, 600V Cable range from 3 to 7mm Diameter
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven