TERMS OF PRODUCT WARRANTY

Size: px
Start display at page:

Download "TERMS OF PRODUCT WARRANTY"

Transcription

1 For safety, please read this manual carefully. SAFETY MANUAL ATTENTION: To reduce electric danger, do not open the device cover, and the user may not tamper with its inside. Consult a professional about repair. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A lightning with arrow head in a triangle to warn the user that there is a dangerous high-voltage current inside the product. The current is strong enough to cause electric shock. An exclamation mark in a triangle to warn the user that there are important instructions for use or maintenance of the peripherals/accessories. 1. Please read this manual thoroughly before use. 2. Keep this manual for consulting, when necessary. 3. To reduce the risk of fire or electric shock, keep the device away from rain or humidity.. To avoid electric shock, do not use the jack with bare or open wires, unless otherwise they are completely coated. 5. Do not plug the power-source cable in with a wet hand. 6. Keep away from water, humid and very hot places. 7. Care should be taken to prevent the power-source cable from being trodden or stepped on. 8. Carefully prevent water or foreign matters from dropping into the device. 9. Clean with soft towel without using any highly corrosive chemicals. 10. Turn off the power source when the device is not in use; unplug the device when it is not used for a long time. 11. Use the power source under the instructions herein or found on the device. TERMS OF PRODUCT WARRANTY - The term of product warranty is 12 months as from the date of warranty activation, and not more than 18 months as from the date of manufacture. - The product is within its warranty term, and the damages are caused by the manufacturer's faults. - The product must have SMS (anti-tampering) stamp intact, and the manufacturer's sealing stamp is not torn, erased, or revised. - No warranty for those products damaged due to accidents (broken due to dropping, acts of God, fire, explosion, water leaking in, insects, ), or their accessories (remote controls, disks, microphones, ), or their use not in accordance with the attached user's manual. - No warranty for data stored by customer in the hard disk.

2 SPECIAL FEATURES Types of disk can be read - MIDI-DVD, DVD, DVD-R, SVCD, VCD, CD, CD-R, CD-RW, MP3, USB Karaoke provides support with many abundant functions - Preset up to 99 songs. - List of new songs. - Favorite songs. - Display language as English/Vietnamese. - Remember and delete any songs already remembered. - Adjust the Key, and Tempo to suit each singer's tone. - Increase/decrease the Melody as you like. - Set up greetings, advertisement lines on screen, entirely in Vietnamese. - Scoring as you like. Quality images; pure and clear sounds - Decoding techniques of MPEG1, MPEG2 and MPEG3, DIVX (Code ) *Notes: Absolutely no support for DIVX formats. - High-quality sounds with digital effects. Other special features - Unique technique of VOCAL/CHORUS creating very lively effects of singing and chorus. - Connected to USB to read the video, audio data of all MP3, WMA, WAV formats. * Accessories: -01 Midi KaraOke disk -01 User's Manual -01 List of Vietnamese Songs -01 Remote control -02 AAA -01 Set of AV cable

3 NAMES OF PARTS Front panel: POWER: on/off power source. 2. Disk tray. 3. USB: Connected to USB.. OPEN/CLOSE: load/eject the disk tray. 5. PLAY/PAUSE: play/temporarily stop. 6. REV/FWD.: Fast rewind/forward. 7. STOP: stop a program being played. 8. MIC1/2: jacks for microphones : number keys. Rear panel: 10. MENU/PBC: select MENU (DVD)/PBC (ON/OFF) with VCD PROG: reserve the song. 12. CLEAR: clear a number wrongly typed. 13. KEY +/-: increase/decrease the pitch. 1. MIC VOL 1/ VOL 2: increase/decrease microphone volume. 15. R/L: select audio output right/left. 16. PREVIOUS/NEXT: move forward/rewind 01 track/chapter. 17. N/P: select color system. CVBS 1. FRONT L/R: Stereo audio output 2. CBVS: Video output 3. COAXIAL: Audio output via coaxial cable. SCORE IN: scoring jack ch audio output 6. Video output: (Component) 7. S-VIDEO: standard video output 8. OPTICAL: digital audio output connected with optical cable 9. Increase/decrease score level

4 CONNECTION S-Video input Audio input Video input (Component) Video input Component cable S-Video cable Rear (Left) Rear (Right) 5.1 channels Amplifier Front (Right) Center Front (Left)

5 REMOTE CONTROL SETUP: setup of the device's features 2. REC/TITLE: + MIDI: record a song + DVD: select each TITLE on a disk 3. NEW SONG/F1: + List of new songs + Delete song (SELECTED SONG). SUBTITLE/REC LIST: + MIDI: display recorded songs list + DVD: on/off the subtitle language 5. MUTE: on/off the device's sound 6. ANGEL/ADD SONG: +MIDI: add a song to list of favorite songs + DVD: select the view angle (DVD must provide support) 7. REPEAT: repeat the song being played 8. REV-FWD: fast forward/rewind 1 track/chapter 9. SEARCH/SMART SELECT: + MIDI: search a song + DVD/VCD: quickly search a film section to play 10. MALE/FEMALE: select Male/Female tone 11. Fn/ZOOM: + Set the tempo and key of a song + Increase/decrease the volume of MIC and MIC ECHO + Zoom in/out the video being played (VCD, DVD) 12. PLAY/1ST RESV: + Play a disk + Remember a priority song 13. MELODY: Increase/decrease the melody 1. Number keys 15. CLEAR: clear the code of a song wrongly typed 16. OPEN/CLOSE: load/eject the disk tray 17. FAVORITE/F3: + List of favorite songs + Move a song one level down (in the list of selected songs) 18. POPULAR/F2: + List of popular songs + Move a song one level up (in the list of selected songs) 19. AUDIO/LANGUAGE: + Select the output audio + Select language to search a song 20. VOCAL: on/off the singer's voice 21. SLOW/SELECTED SONG: + DVD: slow playing of video + MIDI: list of selected songs 22. A-B/iFUN: + DVD: repeat a section of a selected song + MIDI: on/off fun scoring 23. PREV/NEXT: move forward/rewind 1 Chapter/Tract 2. MENU/PBC: + MIDI: set KaraOke features + DVD: enter Main Menu, on/off PBC 25. RETURN: return to the operation just made 26. VOL: increase/decrease the volume 27. STOP: stop the playing 28. RESERVE: save the code of a song Notes: The remote control is directed towards the front of the device within an angle of 30 degrees and maximum distance of 7 m

6 SETUP OF THE DEVICE'S CONFIGURATION * Press Setup key on the Remote control to start the setup; press the arrow keys to select, and press Enter to agree 1. Setup of Ngôn ngữ (Language): - Ngôn ngữ: select the language for display. -Phụ đề: language of the subtitle (DVD must provide support). -Thuyết minh: language of voice-over (VO) (DVD must provide support). -Phiên bản: version of the device's software. Ngoân ngöõ Ngoân ngöõ Phuï ñeà Thuyeát minh Phieân baûn English Vieät 2. Setup of Hiển thị (Display): -Hiển thị: set the display mode +:3 PS: display in normal mode; picture lost while in 16:9. +:3 LB: display in normal mode; but picture not lost while seen in 16:9 mode. +16:9: display in 16:9 mode. -Hệ màu (color system): +Auto +NTSC +PAL -Ngõ ra (output): standard output of S - Video/YPbPr. -Góc độ (angle): on/off the view angle effect (DVD must provide support). -Màn hình chờ (Screen saver). -Lưu thao tác cuối (save the last operation). Hieån thò Hieån thò Heä maøu Ngoõ ra Goùc ñoä Maøn hình chôø Löu thao taùc cuoái 16:9 :3LB :3PS

7 3. Setup of Âm thanh (Audio): -SPDIF: digital audio out. +RAW. +PCM. +Tắt (off). -Kênh ngõ ra (output channel): +LT/RT (amplifier must have Dolby Prologic support). + Stereo +5.1 Channel -Dual mono: +Stereo: sounds via two sepatate channels. +L-mono: only sounds via left channel. +R-mono: only sounds via right channel. +Mix-mono: mixed sounds of 2 channels left and right. -LPCM: sampling frequency -Dynamic: linear compression only effective to disks having Dolby Digital support. AÂm thanh SPDIF Digital Keânh ngoõ ra Dual mono LPCM output Dynamic RAW PCM Taét. Setup of KaraOke: -Cài đặt Mic (microphone setup): +Tắt/Mở (off/on). -Âm lượng Mic (microphone volume). -Âm lượng Echo (echo volume). -Cao độ (Key): increase/decrease the pitch. -Chấm điểm: select the way of scoring +On/off. -Mức độ (level): +Amateur. +Normal. +Professional. -Chọn ngõ vào (select the input): inside/outside. Caøi ñaët KARAOKECaøi ñaët Mic Taét Môû AÂm löôïng Mic Echo Cao ñoä Chaám ñieåm Möùc ñoä MSE Base Effects 5. Setup of Loa ngoài (Speaker): -EQ: set the timbre; support for 5 timbres. -Hiệu ứng: set default for 8 sound effects. Loa ngoaøi EQ Hieäu öùng Taét 3D Jazz Rock Pop Classic

8 6. Cai đăt MIDI (MIDI Setup): -Giai điệu (melody): on/off the song's melody. -Châm điêm vui (Fun): on/off the fun scoring. -Hin h nên MIDI.: DVD background/blue background. -Bai hat yêu thic h(favorite songs). -Đôi mât ma: code to lock the disk drive. -Khoa ô đia (lock the disk).: lock the disk drive when using MIDI Caøi ñaët MIDI Giai ñieäu Môû Taét Chaám ñieåm vui Hình neàn MIDI Baøi haùt yeâu thích Ñoåi maät maõ Khoùa oå ñóa Maät maõ maëc ñònh: Giơí han : -Thay đôi : setup of code for locking to prevent children from seeing films not suitable to their ages (DVD must have support). -Giơi han : set the limit of children lock. + Kid safe: highest. + Audult.: not locking. -Măc đin h(default): restore the initial settings by the manufacturer. *Default code or Giôùi haïn Thay ñoåi Thay ñoåi Giôùi haïn Maëc ñònh DVD/VCD/CD PLAYING 1. Insert the disk into the tray: + Press OPEN/CLOSE key to eject the disk tray; insert the disk into the tray (Notes: the label side of the disk is up, without eccentric insertion to avoid the disk scratching and damages while the device operates). + Press OPEN/CLOSE to load the disk tray. 2. Disk playing: Play STOP FWD REV NEXT PREV x2/x/x6/x8/x16/x32 x2/x/x6/x8/x16/x32 Pause Stop Forward Review Move forward 1 Track/Chapter Rewind 1 Track/Chapter No effect

9 3. Move forward/rewind 1 Track/Chapter: - When the Title of a DVD has many Chapters or a VCD has many Tracks, you may move to a Chapter or another Track as follows: + Press NEXT to move forward 1 Chapter/Track. + Press PREV to rewind 1 Chapter/Track. + In case of VCD/CD while in stop mode, you may select the Track number with number keys to play. For VCD 2.0, select feature PBC OFF before selecting a song.. Fast forward/rewind: + While the device is playing, press.. key or.. key to move forward/rewind. + Press PLAY key to continue playing. + There are 6 levels to increase/decrease the searching speed, each corresponding with pressing the key once: x2/x/x6/x8/x16/x32 5. Stop a program being played: + Press STOP key to stop; press PLAY to resume playing. 6. Temporarily stop and slowly move the picture (DVD/VCD): + Press PLAY/PAUSE key to stop temporarily. + Then press STEP to slowly move each picture. 7. Slow playing (DVD/VCD): + Press SLOW key to play slowly. + Press PLAY to return to normal playing mode. 8. Zoom in pictures (DVD/VCD): You may make a picture 3 times larger. Depending on the playing mode, ZOOM key will have different effects; press up/down/left/right key to move. + While in normal playing mode, ZOOM key has effect to enlarge a picture. + While in image moving mode, ZOOM key has effect to enlarge a picture corner to be viewed. + To return to normal mode, press ZOOM key again. * Notes: ZOOM mode to view pictures also depends on the disk. 9. Key of function list (DVD Menu): only effective when the disk has Menu function support. + Press MENU key to select from the list of functions. + Press or key to select items. + Press ENTER or PLAY to select. + Press MENU key to return to Main Menu. MIDI KARAOKE PLAYING 1. Basic operations: + Play: Type the code of the song with number keys 0-9 (in accordance with the code in the attached list of songs). Press PLAY or ENTER to play. + Press RESERVE key to store. + Press PRIORITY to store in priority position. + Stop: While playing, press STOP key to ceasing playing. 2. Delete a song from the list of selected songs: - When you want to delete one of the selected songs, press SELECTED SONG key to display the list of such songs; operate using the following functional keys. + F1 key to delete a song. + F2 key to move a song to an upper position. + F3 key to move a song to a lower position

10 3. Adjust the key: + Can change the song key by pressing continuously Fn key on the remote control until displaying the symbol b/#, then use left/right key to adjust. Adjust the tempo: + Can change the song tempo by pressing continuously Fn key on the remote control until displaying the symbol of running man, then use left/right key to adjust 5. Adjust Mic and Mic Echo volume: + Can increase/decrease the volume of Micro and Echo by pressing Fn key on the remote control, then use left/right key to adjust 6. Select Male/female tone: + Press Male/Female key to select male/female tone 7. Popular song + Press Popular key to display the list of popular songs (approximately 300 songs) + Select the song then press ENTER, press Popular again to exit 8. Favorite song + While playing song, press ADD SONG/ANGLE to add the song to favorite list + Press Favorite key to display the list of favorite songs, press F1 to clear the song, press F2 to play all the song, press F3 to play randomly + Select the song then press ENTER key to play, press MENU to exit 9. New song + Press NEW SONG key to enter to the list of new songs updated in new Vol disc of Midi disc + Select the song then press PLAY/ENTER to play, press RESERVE to store (approximately 99 songs) 10. The song melody: + Press MELODY +/- key to increase/decrease the song melody 11. Repeat: + Press REPEAT key to repeat the song being played 12. Select the song and fast searching by remote control: + Use number keys to input the code of the song, press Play to play + Press SEARCH key on the remote control to display the song list with many different languages, press LANGUAGE/AUDIO to move to the song list to be found + Search a song as per the first letters (a, b, c ) of its title, by pressing the number keys with accompanied letters on the Remote control and start searching. + Ex: To search a song with K as the first letter in its title press number 5 repeatedly until K appears. Then the list of songs on the right will promptly display all the titles of the songs starting with K press the up/down key to select the song and press ENTER to store. Press Male/Female key to browse 01 page at a time. Press CHAR+/- to search a song as per the number of words in its title. di chuyeån Leân/Xuoáng/Traùi/Phaûi Ngoân ngöõ Increase/decrease the number of words Character being searched in song title (CHAR+/-) Total words in song title (5 words)

11 SETUP WHEN USING MIDI KARAOKE DISK - Press MENU key on Remote control to enter the configuration setup. + Danh mục bài: list of the song titles in each language. + Tìm theo tác giả: list of writers (only support for Vietnamese writers) + Bài hát mới (new songs) + Bài hát phổ biến (popular songs) + Bài hát yêu thích (favorite songs) + Phát ngẫu nhiên (random playing) + Cấu hình (configuration) * Lowest score: limit of lowest score in scoring * Scoring music: the music played while scoring * Clear: on/off the dark background of the song lyrics * Song lyrics: on/off the song lyrics, with random color in display * Cài đặt lời chào: (Greetings setup): - Cho phép hiển thị (Can display): on/off the greetings - Maù don g 1(Color of line 1): select the displayed color - Maù don g 2(Color of line 2): select the displayed color - Nhâp lơi chao 1(Type greetings 1): type its contents Danh muïc baøi Tìm theo taùc giaû Baøi haùt môùi Baøi haùt phoå bieán Baøi haùt yeâu thích Phaùt ngaãu nhieân Caáu hình * How to make advertisement setup with the word MASECO : - While the device is playing the MIDI KaraOke disk press MENU Cấu hình Cài đặt lời chào Cho phép hiển thị select On press RETURN Nhập lời chào 1 press number 6 'M' press ENTER press number 2 'A' press ENTER press number 7 'S' 'E' 'C' 'O'; after completing set these characters, press MENU to exit. The above steps of setup are similarly made for line 2. * Notes: When wanting to set AÀÁ, use MALE/FEMALE key to select the characters you want to set. * Plug the USB into the port for connection at the front of the device. The device will identify the data inside; use the Up/Down/Left/Right to select the field of data to be seen; press ENTER to play. * Press RETURN to go back to the Root directory. - Audio: Sounds (*.mp3/*.wma). - Image: Pictures (*.jpg). - Video: Movie/photos (*.dat/*.avi). * Notes: The device can only identify a USB when there is no disk in it. USB CONNECTION

12 TROUBLESHOOTING PHENOMENON SPECIFIC CASE HOW TO CORRECT Disk tray can not be ejected -Power cable unplugged -Plug it into the power socket The device refuses to play -Drive contains no disk -Disk inserted with wrong side -Disk so dirty or scratched -Insert disk into drive -Insert with correct side -Clean or replace disk No sound output No image out Picture moves up/down -Audio cable not yet connected -Amplifier not yet works -The device's volume too low - Disk so dirty or scratched -Audio output is interrupted -TV not yet on or incorrect Video Mode -It's not a video disk -Cable not yet connected to Video jack -Video signal cable broken -Wrong system -Make correct cable connection -Check to press Power and Volume keys of amplifier -Increase the device's volume -Clean or replace disk -Press Mute key to turn on -Turn TV on; select the correct Video intput -Replace it with a video one -Make correct cable connection -Replace it with a new one -Correct the system between TV and the device Poor quality of sound/image - Disk so dirty or scratched -Clean or replace disk Without Microphone sounds There is whistle (echo) Remote control can not work (while the keys on the device can be operated) -Microphone is off -Low volume of microphone sound -Microphone is put near TV or speakers Volume of amplifier/tv is set so high -Batteries are inserted wrongly or run out -Key(s) is/are blocked -There is a large barrier between the device and remote control -Too long distance to control -Incorrect control angle -Turn microphone on -Increase microphone volume -Move microphone away from TV and speakers -Reduce amplifier/tv volume -Check or replace with new ones -Repair the blocked keys -Make sure there is no barrier between the device and remote control -Distance not too long (maximum 7 m) -Correct the control direction (best control angle within 30 degrees)

13 WARRANTY AGENTS HO CHI MINH CITY Electronic Services Center, 07 Hoang Minh Giam St., Phu Nhuan Dist. Tel: Electronic Services Center, 69 Hoang Van Thu St., Phu Nhuan Dist. Tel: Tuan Trung Private Business, 52-5 Huynh Thuc Khang St., Dist. 1 Tel: Cat Thuy Joint-stock Co., 98 Nguyen Kim St., Dist. 10 Tel: Le Phu My Trading Co., Ltd, 126/11 Truong Chinh St., Dist. 12 Tel: Branch of Quoc Hoa Trading & Services Co., Ltd, 261A An Duong Vuong St., Dist. 5 Tel: Vo Van Minh Electronics Co., Ltd, 9 Huu Nghi St., Binh Tho W., Thu Duc Dist. Tel: HA NOI Arirang Electronics Trading Co., Ltd, 93 To Hieu St., Cau Giay Dist. Tel: HAI PHONG Cuong Hung Agent for Distribution & Warranty, 82 Me Linh St., Trai Cau Tel: PHU THO Son Tung Electronics & Refrigeration Co., Ltd, 166 Hung Vuong St., Viet Tri Tel: BAC GIANG Hoe Lan Electronic Shop, 79 Le Loi St., Le Loi W. Tel: QUANG NINH Minh Nam Business, 87 Tran Quoc Tang St., Ha Long Tel: THAI BINH Manh Thang Electronic Warranty Center, 17 Nguyen Thi Minh Khai St. Tel: NAM ĐINH Tran Trong Huy, 9 Mac Thi Buoi St., Thong Nhat W. Tel: THANH HOA Hoang Binh Electronics Shop, 185B Dương Dinh Nghe St. Tel: NGHE AN Hong Ha Trading Joint-stock Co., 171 Le Loi St., Vinh City, Nghe An Tel: HA TINH Dung Tam Trading Co., Ltd, 15 Nguyen Chi Thanh St. Tel: QUANG BINH Hong An Co., Ltd, Sub-section 11, To Huu St., Dong Hoi Tel: QUANG TRI Quy Huyen Private Business, 96 Le Duan St., Dong Ha Tel: HUE Tuan Electronic Repair & Warranty, 70 Phan Dang Luu St. Tel: ĐA NANG Branch of MASECO Da Nang, 206 Dien Bien Phu St., Thanh Khe Dist. Tel: QUANG NAM Tan Nhat Thanh Trading & Services Private Business, 05 Hoang Dieu St. Tel: QUANG NGAI Nhan Nguyen Electronics, 70 Le Thanh Ton St., Nghia Chanh W. Tel: QUI NHON An Electronic Shop, 20 Mai Xuan Thuong St. Tel: PHU YEN Xuan Luu Electronics, 17 Tran Quy Cap St., W. 3, Tuy Hoa City Tel: NHA TRANG Anh Dung Electronic Shop, 18A Yet Kieu St. Tel:

14 WARRANTY AGENTS NINH THUAN Vinh Phuc Electronic Shop, 220 Ngo Gia Tu St., Thanh Son W., Phan Rang City Tel: PHAN THIET Hung Electronics Trading & Services Co., Ltd, 137 Tran Phu St. Tel: GIA LAI Vinh Tin Co., Ltd, 175 Hung Vuong St. Tel: BUON ME THUOT Toan Khong Gian Shop, Section 20, Ly Thuong Kiet St., Thang Loi W. Tel: LAM ĐONG Minh Tam Electronics Co., Ltd, /2 St., Da Lat Tel: Ngoc Hong Audio-Musical Instruments-Lighting, 56 Hai Thuong Lan Ong St., Lien Nghia, Duc Trong Tel: ĐONG NAI Chau Linh RADO Trading Co., Ltd, 22B P. Chu Trinh St., Bien Hoa City Tel: LONG KHANH Hung Phat Electronics, 79 Tran Phu St., Xuan An W., Long Khanh Tel: VUNG TAU Vung Tau Audio, 176 Nam Ky Khoi Nghia St. Tel: BINH DUONG Minh Bao Hanh Electronics & Refrigeration Co., Ltd, 903 CMTT St. Tel: TAY NINH Cong Huan Shop, 75/5A Long Chi, Hoa Thanh Tel: LONG AN Trong Tin One-member Co., Ltd, 157D, National Highway 62, Tan An City Tel: MY THO Than Electronics Co., Ltd, 25 Nguyen Trai St., W. 7 Tel: BEN TRE Electronic Products Warranty Center, 12 Nguyen Trung Truc St. Tel: ĐONG THAP Huy Phong Electronics, 76 Nguyen Dinh Chieu St., Cao Lanh Tel: Thai Electronic Warranty & Repair Station, 197/3 Nguyen Tat Thanh St., Sa Dec Tel: VINH LONG Dung Phong Phu Warranty Station, 187 Nguyen Thi Minh Khai St., W.1 Tel: TRA VINH Luan Electronics, 105 Tran Quoc Tuan St., W. 2 Tel: LONG XUYEN Axil Electronic Repair Establishment, 12/5 Tran Nguyen Han St. Tel: KIEN GIANG Linh Electronic Repair Services, 31 Tran Hung Dao St., Rach Gia Tel: Giau Electronics & Refrigeration Establishment, 30/-Town, Duong Dong, P. Quoc Tel: CAN THO Phuoc Cuong Private Business, 89 Nam Ky Khoi Nghia St. Tel: SOC TRANG Tran Dang Khoa Shop, 55 Xo Viet Nghe Tinh St. Tel: BAC LIEU Thoi Dai Shop, 127 Hoang Van Thu St. Tel: CA MAU Electronic Technologies & Refrigerating Equipment One-member Co., Ltd, 25 Nguyen Trai St Tel:

FEATURES. Support for disks - MIDI-DVD,DVD,DVD-R,SVCD,VCD,CD,CD-R,CD-RW,Mp3,Mp4,USB

FEATURES. Support for disks - MIDI-DVD,DVD,DVD-R,SVCD,VCD,CD,CD-R,CD-RW,Mp3,Mp4,USB SAFETY MANUAL For safety, please read this manual carefully. ATTENTION: To reduce electric danger, do not open the device cover, and the user may not tamper with its inside. Consult a professional about

More information

USER S MANUAL AR-36L SPECIAL FEATURES

USER S MANUAL AR-36L SPECIAL FEATURES Support for disks USER S MANUAL AR-36L SPECIAL FEATURES - MIDI-DVD,DVD, DVD-R, SVCD, VCD, CD, CD-R, CD-RW, MP3,MP4. Karaoke support various functions - Function of presetting the song and helps to preset

More information

Remote control Song Book User s manual. 2 AA batteries AV cable HDMI cable. Angel to receive signals from the remote control:

Remote control Song Book User s manual. 2 AA batteries AV cable HDMI cable. Angel to receive signals from the remote control: SAFETY MANUAL For safety, please read this manual carefully. ATTENTION: To reduce electric danger, do not open the device cover, and the user may not tamper with its inside. Consult a professional about

More information

FEATURES. Support for disks. Karaoke support various functions. Qualitative picture, transparent and clear sound. Other special features:

FEATURES. Support for disks. Karaoke support various functions. Qualitative picture, transparent and clear sound. Other special features: SAFETY MANUAL For safety, please read this manual carefully. ATTENTION: To reduce electric danger, do not open the device cover, and the user may not tamper with its inside. Consult a professional about

More information

Remote control Song Book User s manual. 2 AA batteries AV cable HDMI cable

Remote control Song Book User s manual. 2 AA batteries AV cable HDMI cable SAFETY MANUAL For safety, please read this manual carefully. ATTENTION: To reduce electric danger, do not open the device cover, and the user may not tamper with its inside. Consult a professional about

More information

LIST OF AUTHORIZED RETAILERS. No Merchant name Address MID Location

LIST OF AUTHORIZED RETAILERS. No Merchant name Address MID Location LIST OF AUTHORIZED RETAILERS No Merchant name Address MID Location 1 MPOS VN 7230 2 Macbook Sài Gòn MPOS 27B Tran Hung Dao Street, Hoan Kiem District, Hanoi 7B Ton That Tung, Pham Ngu Lao Ward, District

More information

USER S MANUAL AR-18 DELUXE

USER S MANUAL AR-18 DELUXE USER S MANUAL AR-18 DELUXE SPECIAL FEATURES Support for disks - MIDI-DVD,DVD,DVD-R,SVCD,VCD,CD,CD-R,CD-RW,MP3,MP4 Karaoke support various functions - Function of presetting the song and helps to preset

More information

Khối: Cao Đẳng nghề và Trung Cấp Năm 2009

Khối: Cao Đẳng nghề và Trung Cấp Năm 2009 Hướng Dẫn Thực Hành Lập Trình Windows Khối: Cao Đẳng nghề và Trung Cấp Năm 2009 Hướng dẫn: Bài tập thực hành được chia làm nhiều Module Mỗi Module được thiết kế cho thời lượng là 3 tiết thực hành tại lớp

More information

HƯỚNG DẪN SỬ DỤNG HỆ THỐNG CẬP NHẬT CHỨNG THƯ SỐ HOTLINE:

HƯỚNG DẪN SỬ DỤNG HỆ THỐNG CẬP NHẬT CHỨNG THƯ SỐ HOTLINE: HƯỚNG DẪN SỬ DỤNG HỆ THỐNG CẬP NHẬT CHỨNG THƯ SỐ HOTLINE: 19006276 Ngày phát hành : 03/08/2017 Nơi phát hành : Công ty CP Chữ ký số Vi Na Phiên bản : 2.0 1 Mục lục 1 Các thuật ngữ viết tắt... 3 2 Môi trường

More information

An Phu ward, My Duc District, Ha Noi

An Phu ward, My Duc District, Ha Noi VIETNAM MICROFINANCE WORKING GROUP (MFWG) 4th Floor, No.70, Alley 34, Hoang Cau street, Dong Da district, Hanoi Tel: (84-4) 6269 1825 * Fax: (84-4) 6282 2462 * Email: info@microfinance.vn/ taichinhvimo@gmail.com

More information

USER S MANUAL AR-3600Hi

USER S MANUAL AR-3600Hi USER S MANUAL AR-3600Hi SPECIAL FEATURES Support for disks - MIDI-DVD,DVD,DVD-R,SVCD,VCD,CD,CD-R,CD-RW,Mp3,Mp4,USB Karaoke support various functions - Function of presetting the song and helps to preset

More information

Supervisor: Dr. Pham Minh Duc Class code: TS0813T1 Class

Supervisor: Dr. Pham Minh Duc Class code: TS0813T1 Class Supervisor: Dr. Pham Minh Duc Class code: TS0813T1 (Year: 2009-2013) Class email: ts0813t1@student.ctu.edu.vn No. Full Name Birthday Sex M F ID Mobile phone Email 1 Le Duc Anh 19/07/1990 X 4087897 0979468254

More information

Bộ môn MMT&TT, Khoa Công Nghệ Thông Tin và TT, ĐH Cần Thơ

Bộ môn MMT&TT, Khoa Công Nghệ Thông Tin và TT, ĐH Cần Thơ Giới thiệu Lập trình mạng Truyền thông Cơ chế giao tiếp liên quá trình (IPC) Mô hình OSI Mạng TCP/IP Dịch vụ mạng Mô hình Client/Server Các kiểu kiến trúc chương trình 1 Truyền thông Là sự giao tiếp, trao

More information

HƯỚNG DẪN CÀI ĐẶT PHẦN MỀM DIỆT VIRUS AVIRA

HƯỚNG DẪN CÀI ĐẶT PHẦN MỀM DIỆT VIRUS AVIRA HƯỚNG DẪN CÀI ĐẶT PHẦN MỀM DIỆT VIRUS AVIRA A V I R A A N T O À N H Ơ N Trang 1 Mục lục 1. Trước khi cài đặt... 3 1.1 Kiểm tra khả năng đáp ứng của hệ thống:... 3 1.2 Hướng dẫn nâng cấp:... 3 1.3 Hướng

More information

LIST OF AUTHORIZED RETAILERS. No Merchant Name Address MID Location

LIST OF AUTHORIZED RETAILERS. No Merchant Name Address MID Location LIST OF AUTHORIZED RETAILERS No Merchant Name Address MID Location 1 MPOS VN 7230 27B Tran Hung Dao, Hoan Kiem, Hanoi 140000000000190 Hanoi 2 Macbook Sai Gon MPOS 7B Ton That Tung, Pham Ngu Lao Ward, District

More information

Tình huống 1: PPPoE với Username và Password

Tình huống 1: PPPoE với Username và Password HƯỚNG DẪN CẤU HÌNH NHANH INTERNET (Vigor2912 / Vigor2925) Tình huống 1: PPPoE với Username và Password - CTY có một đường truyền cáp quang. - Nhà mạng đã cho mượn Converter quang và router - Router đó

More information

SMS Banking User Guide

SMS Banking User Guide SMS Banking User Guide CONTENT 1. Introduction...1 2. VnTopup service (8049)...1 3. Inquiry service (8149)...1 Account Balance Inquiry...1 Last Five Transactions Inquiry...1 Foreign Exchange Inquiry...2

More information

BÀI 1: VBA LÀ GÌ? TẠO MACRO, ỨNG DỤNG CÁC HÀM TỰ TẠO (UDF), CÀI ĐẶT ADD-INS VBA là gì?

BÀI 1: VBA LÀ GÌ? TẠO MACRO, ỨNG DỤNG CÁC HÀM TỰ TẠO (UDF), CÀI ĐẶT ADD-INS VBA là gì? BÀI 1: VBA LÀ GÌ? TẠO MACRO, ỨNG DỤNG CÁC HÀM TỰ TẠO (UDF), CÀI ĐẶT ADD-INS VBA là gì? Nguyễn Duy Tuân: 0904.210.337 1/12 Macro là gì? Macro là một lệnh lệnh thực thi một hay nhiều thao tác người dùng

More information

Bộ môn HTMT&TT, Khoa Công Nghệ Thông Tin và TT, ĐH Cần Thơ

Bộ môn HTMT&TT, Khoa Công Nghệ Thông Tin và TT, ĐH Cần Thơ RPC và RMI Khái niệm RPC Khái niệm RMI Các bước cài đặt RMI trong Java Ví dụ về RMI 1 RPC (Remote Procedure Call) Khái niệm RPC: gọi thủ tục ở xa. Trong suốt về mặt ngữ nghĩa: gọi thủ tục ở xa cũng có

More information

ĐỌC, GHI XML VỚI C# TRONG ADO.NET --- SỬ DỤNG VISUAL STUDIO

ĐỌC, GHI XML VỚI C# TRONG ADO.NET --- SỬ DỤNG VISUAL STUDIO TRUNG TÂM TIN HỌC ĐẠI HỌC KHOA HỌC TỰ NHIÊN-TP.HCM ĐỌC, GHI XML VỚI C# TRONG ADO.NET --- SỬ DỤNG VISUAL STUDIO 2010 --- 1 TRUNG TÂM TIN HỌC ĐẠI HỌC KHOA HỌC TỰ NHIÊN-TP.HCM Nội dung 1. Tổng quan về v XML

More information

Mạng máy tính - Computer Network: Hệ. Giao thức - Protocol:

Mạng máy tính - Computer Network: Hệ. Giao thức - Protocol: CÔNG NGHỆ WEB VÀ ỨNG DỤNG Giới i thiệu chung Nội dung Nhắc lại một số khái niệm Phân loại trang web Một số bước chính trong phát triển website Công bố website trên internet Xác định cấu trúc website 3

More information

Mô hình dữ liệu quan hệ (Relational data model)

Mô hình dữ liệu quan hệ (Relational data model) Mô hình dữ liệu quan hệ (Relational data model) 1 Nội dung 1. Mô hình dữ liệu quan hệ (Relational data model) 2. Phép toán tập hợp (Set Operation) 3. Phép toán đại số quan hệ (Relational Algebra Operation)

More information

STACK và QUEUE. Lấy STACK

STACK và QUEUE. Lấy STACK MỤC TIÊU STACK và QUEUE Hoàn tất phần thực hành này, sinh viên có thể: - Hiểu được cách thức sử dụng stack và queue trên cơ sở sử dụng danh sách liên kết để cài đặt. - Hiểu và vận dụng các cấu trúc stack

More information

HƯỚNG DẪN SỬ DỤNG PLESK PANEL

HƯỚNG DẪN SỬ DỤNG PLESK PANEL HƯỚNG DẪN SỬ DỤNG PLESK PANEL Trang 1 I. HƯỚNG DẪN ĐĂNG NHẬP 1. Đăng nhập hệ thống Plesk: Để đăng nhập vào hệt thống plesk panel thực hiện các bước sau(hình 1): - Trên trình duyệt web gõ vào địa chỉ: https://ip:8443

More information

CẤU TRÚC DỮ LIỆU NÂNG CAO

CẤU TRÚC DỮ LIỆU NÂNG CAO CẤU TRÚC DỮ LIỆU NÂNG CAO Các kiến thức yêu cầu Tóm tắt nội dung môn học Phương pháp kiểm tra đánh giá Tài liệu tham khảo 1 Các kiến thức yêu cầu Các thuật toán và cấu trúc dữ liệu cơ bản Ngôn ngữ lập

More information

GV: Phạm Đình Sắc or

GV: Phạm Đình Sắc   or Giới Thiệu: Lập trình ứng dụng Windows Form in VB.Net 2005 Thời lượng: 45 tiết LT 30 tiết TH GV: Phạm Đình Sắc Email: sacvn@yahoo.com or dinhsac@gmail.com Windows Form programming with VB.Net 2005. 1 Buổi

More information

Nội dung chính của chương. Các công nghệ đĩa cứng Cấu tạo vật lý của đĩa cứng Cấu tạo logic của đĩa cứng Cài đặt đĩa cứng như thế nào?

Nội dung chính của chương. Các công nghệ đĩa cứng Cấu tạo vật lý của đĩa cứng Cấu tạo logic của đĩa cứng Cài đặt đĩa cứng như thế nào? Chương 6 Đĩa cứng Nội dung chính của chương Các công nghệ đĩa cứng Cấu tạo vật lý của đĩa cứng Cấu tạo logic của đĩa cứng Cài đặt đĩa cứng như thế nào? Công nghệ đĩa cứng Đĩa cứng đọc/ghi dữ liệu như thế

More information

Khoa KH & KTMT Bộ môn Kỹ Thuật Máy Tính

Khoa KH & KTMT Bộ môn Kỹ Thuật Máy Tính dce Khoa KH & KTMT Bộ môn Kỹ Thuật Máy Tính, CE Department dce Tài liệu tham khảo Digital Systems, Principles and Applications, 8 th /5 th Edition, R.J. Tocci, Prentice Hall Digital Logic Design Principles,

More information

HƯỚNG DẪN CÁCH SỬ DỤNG WINDOWS MOVIE MAKER

HƯỚNG DẪN CÁCH SỬ DỤNG WINDOWS MOVIE MAKER HƯỚNG DẪN CÁCH SỬ DỤNG WINDOWS MOVIE MAKER Tiện ích của phần mềm Windows Movie Maker: Tạo Slide show trình chiếu ảnh. Tăng giảm độ sáng tối cho ảnh. Hiệu ứng chuyển ảnh. Chèn âm thanh và chỉnh sửa. Chèn

More information

TÀI LIỆU THỰC HÀNH MÔN CƠ SỞ DỮ LIỆU NÂNG CAO

TÀI LIỆU THỰC HÀNH MÔN CƠ SỞ DỮ LIỆU NÂNG CAO TÀI LIỆU THỰC HÀNH MÔN CƠ SỞ DỮ LIỆU NÂNG CAO Mục lục Index...2 Tài liệu tham khảo...2 Công cụ...2 Nội dung...2 Cú pháp tạo index...2 Cú pháp chỉnh sửa index...2 Áp đặt tính duy nhất trên cột không khóa...3

More information

BÀI TẬP THỰC HÀNH LẬP TRÌNH WINDOWS C#

BÀI TẬP THỰC HÀNH LẬP TRÌNH WINDOWS C# BỘ GIÁO DỤC VÀ ĐÀO TẠO TRƯỜNG ĐẠI HỌC SƯ PHẠM TP.HCM KHOA CÔNG NGHỆ THÔNG TIN http://www.hcmup.edu.vn BÀI TẬP THỰC HÀNH LẬP TRÌNH WINDOWS C# Phần 1: Làm quen với ứng dụng Form 1. Bài tập mở đầu 1.1. Khởi

More information

BELGIUM ONLINE APPOINTMENT

BELGIUM ONLINE APPOINTMENT BELGIUM ONLINE APPOINTMENT Online Appointment Link/ Link đặt hẹn online: http://www.vfsglobal.com/belgium/vietnam/vietnamese/schedule-anappointment.html Using for applicants who wish to apply for Belgium

More information

Bài Thực hành Asp.Net - Buổi 1 - Trang: 1

Bài Thực hành Asp.Net - Buổi 1 - Trang: 1 Bài 1.1 1. Khởi động VS2010 2. File > News > Web Site, chọn: Visual C# ASP.NET Empty Web Site Chọn vị trí lưu và đặt tên file là Bai1.1 3. Thêm trang mới (Web Form ; tên là Default.aspx) 4. Viết code như

More information

HỢP ĐỒNG MUA BÁN HÀNG HÓA QUỐC TẾ GV: NGUYỄN THỊ BÍCH PHƯỢNG

HỢP ĐỒNG MUA BÁN HÀNG HÓA QUỐC TẾ GV: NGUYỄN THỊ BÍCH PHƯỢNG HỢP ĐỒNG MUA BÁN HÀNG HÓA QUỐC TẾ GV: NGUYỄN THỊ BÍCH PHƯỢNG KHÁI NIỆM & PHÂN LOẠI Hợp đồng mua bán hàng hóa quốc tế: còn được gọi là hợp đồng xuất nhập khẩu, hoặc hợp đồng mua bán ngoại thương là sự thỏa

More information

Online Appointment System will work better with below conditions/ Hệ thống đặt hẹn online sẽ hoạt động tốt hơn với điều kiện sau đây:

Online Appointment System will work better with below conditions/ Hệ thống đặt hẹn online sẽ hoạt động tốt hơn với điều kiện sau đây: Online Appointment Link/ Link đặt hẹn online: http://www.vfsglobal.com/netherlands/vietnam/schedule-an- Appointment.html ( Using for applicants who wish to apply for The Netherlands visas at VFS Netherlands

More information

Tài liệu hướng dẫn: Stored Procedure

Tài liệu hướng dẫn: Stored Procedure 1 Tài liệu hướng dẫn: Stored Procedure Tài liệu hướng dẫn: Stored Procedure Người thực hiện Hoàng Anh Tú Nội dung 1 Giới thiệu... 2 2 Stored Procedure cơ bản... 2 2.1 Tạo Stored Procedure... 3 2.1.1 Tạo

More information

BÀI 6 LÀM VIỆC VỚI THÀNH PHẦN MỞ RỘNG CỦA CSS3

BÀI 6 LÀM VIỆC VỚI THÀNH PHẦN MỞ RỘNG CỦA CSS3 BÀI 6 LÀM VIỆC VỚI THÀNH PHẦN MỞ RỘNG CỦA CSS3 NHẮC LẠI BÀI TRƯỚC Làm việc với các thuộc tính mới trong CSS3: Border-radius Border-image Gradient Transform, transition, animation Làm việc với font web

More information

Phần 2. SỬ DỤNG POWERPOINT ĐỂ CHUẨN BỊ NỘI DUNG TRÌNH BÀY

Phần 2. SỬ DỤNG POWERPOINT ĐỂ CHUẨN BỊ NỘI DUNG TRÌNH BÀY Phần 2. SỬ DỤNG POWERPOINT ĐỂ CHUẨN BỊ NỘI DUNG TRÌNH BÀY NỘI DUNG (1) 1. Giới thiệu PowerPoint và ứng dụng trong dạy học Mục đích sử dụng Các tính năng chung Một số kỹ năng thuyết trình sử dụng PP 2.

More information

Chương 6. Transport Layer. Tài liệu : Forouzan, Data Communication and Networking

Chương 6. Transport Layer. Tài liệu : Forouzan, Data Communication and Networking Chương 6 Transport Layer Tài liệu : Forouzan, Data Communication and Networking 1 Transport Layer Nội dung Đặc trưng của tầng transport Port number Multiplexing và Demultiplexing Connectionless Service

More information

HƯỚNG DẪN SỬ DỤNG ĐẦU GHI H.264 DVR VISION VS (4CH - 8CH - 16CH)

HƯỚNG DẪN SỬ DỤNG ĐẦU GHI H.264 DVR VISION VS (4CH - 8CH - 16CH) HƯỚNG DẪN SỬ DỤNG ĐẦU GHI H.264 DVR VISION VS 401-801-1601 (4CH - 8CH - 16CH) Xin vui lòng đọc kỹ hướng dẫn trước khi sử dụng: + Format ổ cứng, nhấn phải chuột chọn Main Menu. + Nhấn Utility. 1 + Nhấn

More information

GIẢI THUẬT ĐỊNH TUYẾN (ROUTING ALGORITHM)

GIẢI THUẬT ĐỊNH TUYẾN (ROUTING ALGORITHM) Chương 8 GIẢI THUẬT ĐỊNH TUYẾN (ROUTING ALGORITHM) Giải thuật định tuến 4- NỘI DUNG Tổng quan Link state Distance Vector Hierarchical routing Giải thuật định tuến 4- Tổng quan: Phối hợp giữa routing và

More information

SIEMENS INDUSTRIAL NETWORKS

SIEMENS INDUSTRIAL NETWORKS SIEMENS INDUSTRIAL NETWORKS 1 ASI NETWORK INTRODUCTION Number of slaves Up to 62 Number of I/Os Up to 496 inputs and 496 outputs Medium Line length Cycle time Data transfer Unshielded two-wire line for

More information

06 Feb Daily Procurement News of Vietnam

06 Feb Daily Procurement News of Vietnam Daily Procurement News of Vietnam Search Dau-Thau Online Daily Procurement News of Vietnam Procurement items Equipment procurement 2 Vehicles, machinery, equipment 2 Production equipment, machines 2 Building,

More information

Internet Protocol. Bởi: Phạm Nguyễn Bảo Nguyên

Internet Protocol. Bởi: Phạm Nguyễn Bảo Nguyên Internet Protocol Bởi: Phạm Nguyễn Bảo Nguyên Chúng ta đã biết cách tạo User Profile và check mail từ Exchange Server với tùy chọn này nghĩa là bạn đang check mail bằng giao thức MAPI mà chỉ có khi cài

More information

NHẬP MÔN LẬP TRÌNH KHOA HỌC DỮ LIỆU. Bài 10: Thư viện Pandas (2)

NHẬP MÔN LẬP TRÌNH KHOA HỌC DỮ LIỆU. Bài 10: Thư viện Pandas (2) NHẬP MÔN LẬP TRÌNH KHOA HỌC DỮ LIỆU Bài 10: Thư viện Pandas (2) Nội dung 1. Chữa bài tập buổi trước 2. Làm việc với panel 3. Chọn và nhóm phần tử 4. Sử dụng pandas trong bài toán thực tế 5. Bài tập TRƯƠNG

More information

Bài tập lớn số 1. Giả lập bộ định thời

Bài tập lớn số 1. Giả lập bộ định thời Ghi chú: Bài tập lớn số 1 Giả lập bộ định thời Sinh viên nộp bài tại trang web: www.cse.hcmut.edu.vn/portal File nộp bài đặt tên là: ass1.tar.bz2 Hạn chót nộp bài: 08:00am 10/08/2010 SV có thể chỉnh sửa

More information

I. Hướng Dẫn Đăng Nhập:

I. Hướng Dẫn Đăng Nhập: I. Hướng Dẫn Đăng Nhập: 1. Đăng nhập hệ thống Plesk: Để đăng nhập hệ thống thực hiện các bước sau: Bước 1: Trên trình duyệt web gõ địa chỉ http://hosting04.viettelidc.com.vn hoặc địa chỉ https://sww01.viettelidc.com.vn:8443

More information

Bài 10: Cấu trúc dữ liệu

Bài 10: Cấu trúc dữ liệu KHOA CÔNG NGHỆ THÔNG TIN BỘ MÔN CÔNG NGHỆ PHẦN MỀM Bài 10: Bài giảng LẬP TRÌNH CƠ BẢN Tài liệu tham khảo Kỹ thuật lập trình C: cơ sở và nâng cao, Phạm Văn Ất, Nhà xuất bản KHKT Chương 7 2 Mục tiêu Tìm

More information

Đa ngôn ngữ (Internationalization) trong Servlet

Đa ngôn ngữ (Internationalization) trong Servlet Đa ngôn ngữ (Internationalization) trong Servlet Trước khi vào bài, chúng tôi giải thích 3 khái niệm quan trọng: Internationalization (i18n): Nghĩa là kích hoạt một trang có khả năng cung cấp nhiều phiên

More information

Giáo trình này được biên dịch theo sách hướng dẫn của Sun Light. Vì là hướng dẫn kỹ thuật, trong này những thuật ngữ kỹ thuật bằng tiếng Anh tôi chỉ

Giáo trình này được biên dịch theo sách hướng dẫn của Sun Light. Vì là hướng dẫn kỹ thuật, trong này những thuật ngữ kỹ thuật bằng tiếng Anh tôi chỉ Giáo trình này được biên dịch theo sách hướng dẫn của Sun Light. Vì là hướng dẫn kỹ thuật, trong này những thuật ngữ kỹ thuật bằng tiếng Anh tôi chỉ dịch một lần cho các bạn hiểu nghĩa. Những từ đó, về

More information

TỔNG QUAN VỀ.NET VÀ C#

TỔNG QUAN VỀ.NET VÀ C# TỔNG QUAN VỀ.NET VÀ C# PHAN TRỌNG TIẾN BM Công nghệ phần mềm Khoa Công nghệ thông tin, VNUA Email: phantien84@gmail.com Website: http://timoday.edu.vn 7/5/16 Tổng quan về.net và C# 1 Giới thiệu q.net là

More information

Bài 10. Cấu trúc liên nối. khác nhau được gọi là cấu trúc liên nối. nhu cầu trao đổi giữa các module.

Bài 10. Cấu trúc liên nối. khác nhau được gọi là cấu trúc liên nối. nhu cầu trao đổi giữa các module. Bài 10 HỆ THỐNG BUS 1 Cấu trúc liên nối Tập hợp các đường dẫn kết nối các module khác nhau được gọi là cấu trúc liên nối. Việc thiết kế cấu trúc này phụ thuộc vào nhu cầu trao đổi giữa các module. 2 1

More information

Google Search Engine. 12/24/2014 Google Search Engine 1

Google Search Engine. 12/24/2014 Google Search Engine 1 Google Search Engine 12/24/2014 Google Search Engine 1 Cách sử dụng Google Để sử dụng Google, máy tính của bạn chỉ cần có một trình duyệt web như Internet Explorer, Firefox, Netscape, NetCaptor và kết

More information

Lecture 12. Trees (1/2) Nội dung bài học:

Lecture 12. Trees (1/2) Nội dung bài học: Lecture 12. Trees (1/2) Nội dung bài học: 12.1. Khái niệm về cây. 12.2. Các phương pháp duyệt cây. Tham khảo: 1. Deshpande Kakde: C and Data structures.chm, Chapter 21: Trees 2. Elliz Horowitz Fundamentals

More information

TÀI LIỆU HƯỚNG DẪN SỬ DỤNG HOSTING PLESK PANEL

TÀI LIỆU HƯỚNG DẪN SỬ DỤNG HOSTING PLESK PANEL Fall 08 CÔNGTYCỔPHẦNVIỄNTHÔNGFPT CÔNGTYTNHHMTVVIỄNTHÔNGQUỐCTẾFPT TÀILIỆUHƯỚNGDẪNSỬDỤNG HOSTING PLESKPANEL C T Y T N H H M T V F T I / F P T T E L E C O M MỤC LỤC I. HƯỚNG DẪN ĐĂNG NHẬP...2 1. Đăng nhập

More information

CHƯƠNG 2: CÁC ĐẶC ĐIỂM VỀ MÔI TRƯỜNG PHÁT TRIỂN (IDE)

CHƯƠNG 2: CÁC ĐẶC ĐIỂM VỀ MÔI TRƯỜNG PHÁT TRIỂN (IDE) CHƯƠNG 2: CÁC ĐẶC ĐIỂM VỀ MÔI TRƯỜNG PHÁT TRIỂN (IDE) Phan Trọng Tiến BM Công nghệ phần mềm Khoa Công nghệ thông tin, VNUA Email: phantien84@gmail.com Website: http://timoday.edu.vn Ch2- Cac dac diem moi

More information

BÀI GIẢNG CHƯƠNG 3 GIAO TIẾP KẾT NỐI SỐ LIỆU

BÀI GIẢNG CHƯƠNG 3 GIAO TIẾP KẾT NỐI SỐ LIỆU BỘ CÔNG THƯƠNG TRƯỜNG CAO ĐẲNG KỸ THUẬT CAO THẮNG KHOA ĐIỆN TỬ - TIN HỌC BÀI GIẢNG CHƯƠNG 3 GIAO TIẾP KẾT NỐI SỐ LIỆU Môn Học TRUYỀN SỐ LIỆU NỘI DUNG 3.1 Các khái niệm cơ bản về truyền số liệu 3.2 Thông

More information

PHÁT TRIỂN ỨNG DỤNG WEB

PHÁT TRIỂN ỨNG DỤNG WEB Bài giảng PHÁT TRIỂN ỨNG DỤNG WEB Lê Đình Thanh Bộ môn Mạng và Truyền thông Máy tính Khoa Công nghệ Thông tin Trường Đại học Công nghệ, ĐHQGHN E-mail: thanhld@vnu.edu.vn, thanhld.vnuh@gmail.com Mobile:

More information

Preface. Journal of Physics: Conference Series. Related content PAPER OPEN ACCESS. To cite this article: 2016 J. Phys.: Conf. Ser.

Preface. Journal of Physics: Conference Series. Related content PAPER OPEN ACCESS. To cite this article: 2016 J. Phys.: Conf. Ser. Journal of Physics: Conference Series PAPER OPEN ACCESS Preface To cite this article: 2016 J. Phys.: Conf. Ser. 726 011001 Related content - The 5th International Conference on Theoretical and Applied

More information

PHÁT TRIỂN ỨNG DỤNG DI ĐỘNG NÂNG CAO

PHÁT TRIỂN ỨNG DỤNG DI ĐỘNG NÂNG CAO ĐẠI HỌC QUỐC GIA THÀNH PHỐ HỒ CHÍ MINH TRƯỜNG ĐẠI HỌC KINH TẾ - LUẬT KHOA HỆ THỐNG THÔNG TIN TS LÊ HOÀNH SỬ (Chủ biên) ThS HỒ TRUNG THÀNH ThS TRẦN DUY THANH GIÁO TRÌNH PHÁT TRIỂN ỨNG DỤNG DI ĐỘNG NÂNG

More information

KIẾN TRÚC MÁY TÍNH. Giảng viên: ThS. Phan Thanh Toàn. v

KIẾN TRÚC MÁY TÍNH. Giảng viên: ThS. Phan Thanh Toàn. v KIẾN TRÚC MÁY TÍNH Giảng viên: ThS. Phan Thanh Toàn 1 BÀI 4 CẤU TRÚCBUS TRONG MÁY VI TÍNH Giảng viên: ThS. Phan Thanh Toàn 2 MỤC TIÊU BÀI HỌC Liệt kêđược cácloại bus trong hệ thống. Mô tảđược các bus cơ

More information

LẬP TRÌNH WINDOWS FORM VỚI CÁC CONTROL NÂNG CAO (Các control trình bày dữ liệu dưới dạng danh sách)

LẬP TRÌNH WINDOWS FORM VỚI CÁC CONTROL NÂNG CAO (Các control trình bày dữ liệu dưới dạng danh sách) Lab 04: LẬP TRÌNH WINDOWS FORM VỚI CÁC CONTROL NÂNG CAO (Các control trình bày dữ liệu dưới dạng danh sách) A. MỤC TIÊU: Sử dụng Visual Studio.NET 2010/2012/2013 tạo ứng dụng dạng Windows Forms với các

More information

HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN

HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN 07/2016 MỤC LỤC I. GIỚI THIỆU VỀ DỊCH VỤ CDN II. ĐĂNG KÝ TÀI KHOẢN VÀ TẠO DỊCH VỤ CDN 1. Đăng ký Tài khoản mới 2. Tạo gói Dịch vụ mới III. IV. THIẾT LẬP DỊCH VỤ HTTP/HTTPS

More information

HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN

HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN HƯỚNG DẪN SỬ DỤNG DỊCH VỤ CDN 08/2016 MỤC LỤC I. GIỚI THIỆU VỀ DỊCH VỤ CDN II. ĐĂNG KÝ TÀI KHOẢN VÀ TẠO DỊCH VỤ CDN 1. Đăng ký Tài khoản mới 2. Mua mã nạp tiền 3. Tạo gói Dịch vụ mới III. IV. THIẾT LẬP

More information

LÂ P TRI NH WEB ASP.NET

LÂ P TRI NH WEB ASP.NET Trươ ng Đa i Ho c La c Hô ng 2009-2010 LÂ P TRI NH WEB ASP.NET Ts. Vu Đư c Lung Ks. Phan Hư u Tiê p Chương 6: Building and Managing Website 1 http://lhu.edu.vn LHU Xây dựng và quản lý Website ASP.NET OBJECTS

More information

Cụ thể những công việc mà AndroidManifest.xml thực hiện: - Đặt tên cho Java package của ứng dụng.

Cụ thể những công việc mà AndroidManifest.xml thực hiện: - Đặt tên cho Java package của ứng dụng. Trong bài 1 mình đã giới thiệu sơ lược về các thành phần cơ bản của Android cũng như việc sử dụng XML để lập trình ứng dụng Android. Trong bài này mình sẽ giới thiệu thêm về Android Manifest và đi sâu

More information

ĐỀ CƯƠNG CHI TIẾT HỌC PHẦN

ĐỀ CƯƠNG CHI TIẾT HỌC PHẦN BM01.QT02/ĐNT-ĐT TRƯỜNG ĐH NGOẠI NGỮ - TIN HỌC TP.HCM KHOA CÔNG NGHỆ THÔNG TIN CỘNG HÒA XÃ HỘI CHỦ NGHĨA VIỆT NAM Độc lập Tự do Hạnh Phúc 1. Thông tin chung về học phần ĐỀ CƯƠNG CHI TIẾT HỌC PHẦN - Tên

More information

Chương 5. Network Layer 19/09/2016 1

Chương 5. Network Layer 19/09/2016 1 Chương 5 Network Layer 19/09/2016 1 Nội dung Địa chỉ IPv4 Địa chỉ IPv6 Internetworking Giao thức Internet (IP) Chuyển đổi từ IPv4 sang IPv6 19/09/2016 2 Địa chỉ IPv4 Là địa chỉ 32 bit duy nhất, nhận diện

More information

Cài đặt và cấu hình StarWind iscsi trên Windows. iscsi SAN là gì?

Cài đặt và cấu hình StarWind iscsi trên Windows. iscsi SAN là gì? iscsi SAN là gì? iscsi là Internet SCSI ( Small Computer System Interface ) là một chuẩn công nghiệp phát triển để cho phép truyền tải các lệnh SCSI qua mạng IP hiện có bằng cách sử dụng giao thức TCP/IP.

More information

Entity Framework (EF)

Entity Framework (EF) Entity Framework (EF) Lịch sử ra đời Các khái niệm cơ bản Kiến trúc EF DB First/Model First Code First/Code Second Kế thừa Eager/Lazy & Explicit Loading Performance/Profiling Tạ Hoàng Thắng 1 Model First

More information

Random 14 DVD OSD 14 Direction 14 Mute 14 Program 15 PBC 15 Return 15 Goto 15 Zoom 15 Digest 16 Angle 16 Title 16 SUB-T 16 LANG/R/L 16 3D 16

Random 14 DVD OSD 14 Direction 14 Mute 14 Program 15 PBC 15 Return 15 Goto 15 Zoom 15 Digest 16 Angle 16 Title 16 SUB-T 16 LANG/R/L 16 3D 16 DVD-7402 To connect to the Scart jack 9 Random 14 DVD OSD 14 Direction 14 Mute 14 Program 15 PBC 15 Return 15 Goto 15 Zoom 15 Digest 16 Angle 16 Title 16 SUB-T 16 LANG/R/L 16 3D 16 13 REV 14 Forward 14

More information

Nhấn nút New để tạo 1 biến mới Trang 17

Nhấn nút New để tạo 1 biến mới Trang 17 Thiết lập biến môi trường để chạy java ở cơ chế command-line Mở System Properties, Chọn thẻ Advanced Nhấn nút Environment Variables Nhấn nút New để tạo 1 biến mới Đường dẫn đến thư mục cài đặt JDK Nhấn

More information

Press the OSD key the first time, the screen will show (For DVD discs): TITLE ELAPSED

Press the OSD key the first time, the screen will show (For DVD discs): TITLE ELAPSED 13 2X 4X 8X 20X RANDOM DVD OSD DIRECTION MUTE Press the RANDOM key the first time, the unit will enter into random playback status, press the RANDOM key the second time to resume to the normal playback

More information

Bài 7: Các cấu trúc điều khiển

Bài 7: Các cấu trúc điều khiển KHOA CÔNG NGHỆ THÔNG TIN BỘ MÔN CÔNG NGHỆ PHẦN MỀM Bài 7: Bài giảng LẬP TRÌNH CƠ BẢN Nội dung Tìm hiểu về cấu trúc lựa chọn Lệnh if Lệnh if else Lệnh nhiều if Lệnh if lồng nhau Lệnh switch 2 Nội dung Tìm

More information

Lab01: M V C Lưu ý: Để thực hành, các bạn phải cài Visual Studio 2013 trở lên mới hỗ trợ MVC5.

Lab01: M V C Lưu ý: Để thực hành, các bạn phải cài Visual Studio 2013 trở lên mới hỗ trợ MVC5. Lab01: M V C Lưu ý: Để thực hành, các bạn phải cài Visual Studio 2013 trở lên mới hỗ trợ MVC5. 1 Mục đích Giới thiệu mô hình MVC Model, Controller, View Phân biệt ViewData, ViewBag, TempData 2 Khởi động

More information

Khối: Cao Đẳng nghề và Trung Cấp Năm 2009

Khối: Cao Đẳng nghề và Trung Cấp Năm 2009 Hướng Dẫn Thực Hành Lập Trình Windows Nâng Cao Khối: Cao Đẳng nghề và Trung Cấp Năm 2009 Hướng dẫn: Bài tập thực hành được chia làm nhiều Module Mỗi Module được thiết kế cho thời lượng là 3 tiết thực hành

More information

Parallels Cloud Server 6.0

Parallels Cloud Server 6.0 Parallels Cloud Server 6.0 Hướng dẫn sử dụng nhanh 20 08-2013 1 CHƯƠNG 1 Tổng quan Parallels Cloud Server là giải pháp hạ tầng điện toán đám mây cho phép triển khai hệ thống công nghệ thông tin trên cụm

More information

Chương 7. Application Layer. Tài liệu : Forouzan, Data Communication and Networking

Chương 7. Application Layer. Tài liệu : Forouzan, Data Communication and Networking Chương 7 Application Layer Tài liệu : Forouzan, Data Communication and Networking 1 Các ứng dụng mạng Network Applications Là những chương trình chạy trên những đầu cuối khác nhau, giao tiếp với nhau thông

More information

Chương 5. Network Layer. Phần 1 - Địa chỉ IPv4. Tài liệu : Forouzan, Data Communication and Networking

Chương 5. Network Layer. Phần 1 - Địa chỉ IPv4. Tài liệu : Forouzan, Data Communication and Networking Chương 5 Network Layer Phần 1 - Địa chỉ IPv4 Tài liệu : Forouzan, Data Communication and Networking 1 Nội dung Địa chỉ IPv4 Internetworking Giao thức Internet (IP) Địa chỉ IPv6 2 Chức năng tầng Network

More information

Bài tập căn bản Visual Basic.Net Vòng lặp. txtn. txtketqua. btntinh. txtn. txtketqua. btntinh. Trang 1

Bài tập căn bản Visual Basic.Net Vòng lặp. txtn. txtketqua. btntinh. txtn. txtketqua. btntinh. Trang 1 1. Tính n! Ví dụ: 5!= 1 * 2 * 3 * 4 * 5 = 120 Thiết kế form theo mẫu hoặc tự thiết kế theo ý thích. Chú ý nếu đặt tên các control khác với hình bên dưới thì cần sửa lại code cho phù hợp. btntinh Doube

More information

INSTRUCTIONS Please read all instructions carefully before using

INSTRUCTIONS Please read all instructions carefully before using INSTRUCTIONS Please read all instructions carefully before using CONTENTS 1.Basic Operation Panel Introduction 02 Remote control function 04 Turn the Unit On/Off 06 Access main interface 06 U Disc/SD Card

More information

BUREAU VERITAS VIETNAM - HCM Head Office

BUREAU VERITAS VIETNAM - HCM Head Office BUREAU VERITAS VIETNAM - HCM Head Office 2018 PUBLIC TRAINING CALENDAR Subject IRCA - LEAD AUDITOR TRAINING IRCA 9001:2015 - QMS Lead Auditor Training (Khóa đào tạo Chuyên gia đánh giá Trưởng đoàn QMS

More information

1 Bước 1: Test thử kit LaunchPad.

1 Bước 1: Test thử kit LaunchPad. KHOA ĐIỆN ĐIỆN TỬ CLB NGHIÊN CỨU KHOA HỌC Tp. Hồ Chí Minh, ngày 07 tháng 04 năm 2013 HƯỚNG DẪN NẠP BOARD MAIN-MSP430 BẰNG KIT LAUNCHPAD Tài liệu này hướng dẫn cách sử dụng Kit TI MSP430 Launch Pad như

More information

ĐỀ CƢƠNG CHI TIẾT HỌC PHẦN CHUYÊN ĐỀ JAVA NÂNG CAO

ĐỀ CƢƠNG CHI TIẾT HỌC PHẦN CHUYÊN ĐỀ JAVA NÂNG CAO HỌC VIỆN KỸ THUẬT QUÂN SỰ KHOA CÔNG NGHỆ THÔNG TIN CỘNG HÒA XÃ HỘI CHỦ NGHĨA VIỆT NAM Độc lập Tự do Hạnh phúc 1. Thông tin về giáo viên ĐỀ CƢƠNG CHI TIẾT HỌC PHẦN CHUYÊN ĐỀ JAVA NÂNG CAO TT Họ tên giáo

More information

Câu 1: (2 điểm) So sách giữa 2 đối tượng Response và Request. Cho ví dụ minh hoạ.

Câu 1: (2 điểm) So sách giữa 2 đối tượng Response và Request. Cho ví dụ minh hoạ. BỘ CÔNG THƯƠNG TRƯỜNG CĐ KỸ THUẬT CAO THẮNG ------------------------------------- ĐỀ 1 ĐỀ THI HỌC KỲ PHỤ - NĂM HỌC 2009-2010 MÔN : LẬP TRÌNH ỨNG DỤNG WEB 1 LỚP: CDTH07 Thời gian làm bài: 90 phút, không

More information

Tạo Project với MPLAB

Tạo Project với MPLAB [Pick the date] Tạo project với MPLAB, trình biên dịch CCS, program và debug với PICKit2 1. Cài đặt phần mềm MPLAB IDE v8.92 2. Cài đặt phần mềm CCS PIC C Compiler 3. Tạo project trên MPLAB với trình biên

More information

HƯỚNG DẪN QUẢN TRỊ HỆ THỐNG

HƯỚNG DẪN QUẢN TRỊ HỆ THỐNG Lab 07: HƯỚNG DẪN QUẢN TRỊ HỆ THỐNG MỤC TIÊU: Hướng dẫn gười dùng sử dụng các chức năng quản trị các trang hệ thống System NỘI DUNG: 1. Menu My Count Đây là menu để xem và cập nhật thông tin của user admin.

More information

MỤC LỤC. Giáo trình Thiết kế web Trang 1

MỤC LỤC. Giáo trình Thiết kế web Trang 1 NỘI DUNG MỤC LỤC TRANG LỜI NÓI ĐẦU... 3 TÀI LIỆU THAM KHẢO... 4 BÀI 1: GIỚI THIỆU TỔNG QUAN VỀ DREAMWEAVER... 5 I. GIỚI THIỆU... 5 II. CÁC THAO TÁC CĂN BẢN TRONG DREAMWEAVER... 5 III. ĐỊNH DẠNG GIAO DIỆN

More information

NHÚNG. Vi ñiều khiển BM Kỹ Thuật ðiện Tử - ðh Bách Khoa TP.HCM 2

NHÚNG. Vi ñiều khiển BM Kỹ Thuật ðiện Tử - ðh Bách Khoa TP.HCM 2 LẬP TRÌNH HỆ THỐNG NHÚNG BÙI QUỐC BẢO Vi ñiều khiển 8051 BM Kỹ Thuật ðiện Tử - ðh Bách Khoa TP.HCM 2 1 Vi ñiều khiển 8051 BM Kỹ Thuật ðiện Tử - ðh Bách Khoa TP.HCM 3 Phần mềm KEIL PROTEUS BM Kỹ Thuật ðiện

More information

Kiến trúc 8051 và giới thiệu về ngôn ngữ lập trình Assembly

Kiến trúc 8051 và giới thiệu về ngôn ngữ lập trình Assembly Kiến trúc 8051 và giới thiệu về ngôn ngữ lập trình Assembly Microcontroller Chapter 2 Ngo Nhu Khoa Department of Computer Engineering ThaiNguyen University of Technology Các vấn đề chính Kiến trúc bên

More information

B5: Time to coding. Tới thư mục src/example.java và thay đổi nội dung file như sau: Mã: package at.exam;

B5: Time to coding. Tới thư mục src/example.java và thay đổi nội dung file như sau: Mã: package at.exam; B5: Time to coding. Tới thư mục src/example.java và thay đổi nội dung file như sau: Mã: package at.exam; import java.util.arraylist; import android.app.activity; import android.app.alertdialog; import

More information

SD CARD DVD/VCD/CD/MP3/DIVX/MPEG-4 XO1525 USB MOD D200P. User s Manual

SD CARD DVD/VCD/CD/MP3/DIVX/MPEG-4 XO1525 USB MOD D200P. User s Manual USB SD CARD DVD/VCD/CD/MP3/DIVX/MPEG-4 XO1525 MOD D200P User s Manual 9.1 Rear Panel Connections: 19 BEFORE USING: To ensure the safety of the products during transportation, The internal mechanism was

More information

dụng một chính sách, điều này giúp dễ dàng quản lý và cung cấp tính năng Load Balancing (cân bằng tải) phục vụ tốt hơn các yêu cầu của tổ chức.

dụng một chính sách, điều này giúp dễ dàng quản lý và cung cấp tính năng Load Balancing (cân bằng tải) phục vụ tốt hơn các yêu cầu của tổ chức. ISA SERVER FIREWALL Trong số những sản phẩm tường lữa trên thị trường hiện nay thì ISA Server 2004/2006 của Microsoft là firewall được nhiều người yêu thích nhất do khả năng bảo vệ hệ thống mạnh mẽ cùng

More information

Ôn tập Thiết bị mạng và truyền thông DH07TT - Lưu hành nội bộ (không sao chép dưới mọi hình thức)

Ôn tập Thiết bị mạng và truyền thông DH07TT - Lưu hành nội bộ (không sao chép dưới mọi hình thức) 1 Câu 1: Tầng Internet có những giao thức nào? A. ICMP (Internet Control Message Protocol) B. IP (Internet Protocol) C. IGMP (Internet Group Messages Protocol) D. Cả 3 giao thức trên Tầng Liên Mạng (Internet

More information

GIỚI THIỆU TỔNG ĐÀI KX-HTS824. September, 2016

GIỚI THIỆU TỔNG ĐÀI KX-HTS824. September, 2016 GIỚI THIỆU TỔNG ĐÀI 824 September, 2016 1. Sản phẩm tổng đài Panasnic (PBX Line-up) 2 Dung lượng máy nhánh (SLT) 1000 KX-NS1000 +TDA620 KX-NS1000 (DSP + License) 960 KX-TDA600 KX-TDE600 (DSP + License)

More information

B3: Bên khung Package Explore bên trái đi tới thư mục res, bạn sẽ thấy có 3 thư mục con:

B3: Bên khung Package Explore bên trái đi tới thư mục res, bạn sẽ thấy có 3 thư mục con: B3: Bên khung Package Explore bên trái đi tới thư mục res, bạn sẽ thấy có 3 thư mục con: - drawable: thư mục chứa các hình ảnh để làm icon hoặc tài nguyên cho giao diện... - layout: chứa các file xml để

More information

Kỹ thuật thu nhỏ đối tượng trong Design (Layout)

Kỹ thuật thu nhỏ đối tượng trong Design (Layout) Kỹ thuật thu nhỏ đối tượng trong Design (Layout) Viết bởi : Steve Smith http://smith9x.wordpress.com - Kỹ thuật này do mình tự nghĩ ra, đơn giản hóa cụ thể như sau : + Ta sẽ thiết kế các đối tượng lớn

More information

Tìm hiểu Group Policy Object và các ví dụ

Tìm hiểu Group Policy Object và các ví dụ Tìm hiểu Group Policy Object và các ví dụ Các thành phần trong Group Policy Object Phần I: Computer Configuration: Windows Setting: Tại đây có thể tinh chỉnh, áp dụng các chính sách về vấn đề sử dụng tài

More information

Hướng dẫn cài đặt FPT

Hướng dẫn cài đặt  FPT Hướng dẫn cài đặt Email FPT ---X--- Cài đặt email @FPT.VN bằng phần mềm Thunder Bird Bước 1: Mở Thunder Bird, chọn Tools >> Account Setting Bước 2: Tại Account Setting, chọn Account Actions >> Add Mail

More information

BẢO MẬT TRONG SQL SERVER

BẢO MẬT TRONG SQL SERVER Chương 8 SECURITY 1 BẢO MẬT TRONG SQL SERVER Bảo mật trong SQL Server gồm 3 lớp : Login security : kiểm soát ai có thể log vào SQL Server. Database access security : kiểm soát ai có thể truy cập vào một

More information