Wireless Digital Microscope BS3+ User Manual. (English) Prepared by HOT Digital Engineering Dept /19

Size: px

Start display at page:

Download "Wireless Digital Microscope BS3+ User Manual. (English) Prepared by HOT Digital Engineering Dept /19"

Percival Norris
5 years ago
Views:

1 BS3+ User Manual (English) Prepared by HOT Digital Engineering Dept /19

2 Thank you for Purchasing our BS3+, it is a slim type tool and can be easily used in different fields including 1. Textile industrial for textile inspection 2. Printing inspection 3. Industrial inspection: PCB, Precision machinery 4. Educational purpose 5. Hair examination 6. Skin examination 7. Microbiological observation 8. Jewelry & coin (Collections) inspection 9. Visual Assistance 10. Others BS3+ break the limitation of distance, it works within 10 meter s range. Equipped with measurement software and can tell simple measure data conveniently. To know more about this product, please read below manual and follow the instructions to operate. CONTENTS Introduction 2 Parts of Microscope 3 Specification 3 Notes before use 4 Product Outlook & How to Use 5 Hardware and system requirements 6 How to install the Driver software 6 How to install the measurement software 7 Function options 11 How to do the calibration 16 2/19

3 Parts of Microscope Specification 1 DC 5V socket 2 Switch On/Off & light brightness adjust wheel 3 indicator light 4 Focus Roller 5 Ratio scale 6 Lens 7 LED Light source Image :CMOS Sensor Controller: High Speed DSP (M-jpeg) Magnification Range: 5X ~ 200X (Manually) Focus Range: 0 ~ 40mm, other ranges can be customized Frame Rate: VGA20 f/s Under 500 LUX Brightness Capture Resolution: 640*480, can be magnified and minified Take Images: Snap Shot Video Capture Resolution: 640*480 Frequency Range: 2.40GHz 3/19

4 Light Source: Built-in 4~ 8 White-light LED and adjustable illumination ensure the magnified images are clear and bright Illumination Scope: 0 ~ 30000LUX Brightness Control: Manual adjustment USB 2.0 & USB 1.1 Compatible Power Supply TX Rechargeable lithium battery RX 5V DC from USB port Application Software: Hotviewer Support O/S: XP, Vista, Win XP,Win7, Win8 Language: Chinese, English, Chinese (other languages can be customized) Product Dimension: 142 mm ( L ) X 37 mm ( D ) Product Net Weight: 100g Available Color: Black Notes before use 1. Don t dissemble the digital Microscope or change the interior parts, it can cause damage. 2. Don t clean the Microscope with alcohol organic solvents 3. Don t touch the lens with your fingers. 4. Avoid outdoor use if possible. 5. Storage temperature, 0 C ~ 40 C,Humidity:45%RH ~ 85RH%. 6. In case the product gets wet, leave PC connection immediately. And do not dissemble or dry by hair dryer. Send to repair center if the digit microscope was effected by liquid or other elements. 7. Measurement Data only for reference. 8. The effective range is 10 m. 4/19

Standard parts and accessories 1. Digital Microscope (1pc) 2. Charger (1pc) include power line 3. Signal receive base (1pc) 4. CD-ROM (Driver & Measurement) 5.

5 Standard parts and accessories 1. Digital Microscope (1pc) 2. Charger (1pc) include power line 3. Signal receive base (1pc) 4. CD-ROM (Driver & Measurement) 5. Warranty card (1pc), quick guide (1pc) How to Use 1 Turn on the power, adjust the light to the brightest, the LED start blink. Switch& Brightness adjustment Indicator SNAP 2 Connect the signal receive base to the PC, after connected, the indicator light on. Led Indicator USB Cable Receive Base Computer 3 If the transmitter indicator stops blink, and lights on all the time, it 5/19

6 means the signal connected already. Then you can continue to operate in relative software. Hardware system requirements Windows 2000 XP VISTA WIN7 Pentium 1G, Celeron, AMD 1G & above, 128MB Memory, 150MB Hard Disc memory space,16-bit & above VGA,CD-ROM, USB2.0 or USB1.1. How to install the Software BS3+ is a Free Driver product, it can be worked immediately after connected to the computer with operation system above win2000 version. Detailed operation procedures as below: 1. Connect the receiver base to the computer, turn on the microscope, the signal will connect automatically, after the receiver base indicator light stops blink, it means the signal have been connected. Then, click and open My Computer, below interface will shown up. Double click the USB Video device as above red marked in your computer. Now it is ready to use. If you can t find the Video device, or if your computer can t recognize it, please follow below steps to install the software Insert the attached CD, system will auto run to the interface as below and follow the steps to complete the installation: (NOTE:If the computer can t auto run the disc, you need to operate manually by click My Computer DVD/CD Driver run AUTORUN.EXE ) 6/19

7 1Driver installation Click the desktop, like below., open driver folder, drag the AMCAP file to 2 Measurement installations 1 Click to continue, as followings 7/19

8 Select the Language, and then operate it according to the identification. 8/19

9 9/19

10 10/19

11 2. When a microscope was connected to a computer via a USB cable, Click the,you can open the preview of the application interface. 11/19

12 Photo File Double click and You can preview Preview Video File Double click and You can preview 3.Interface introduction 1. Tool bar Open image photo video pause/play stop move initial full screen measurement 2. Devices 12/19

13 Digital zoom Gray level want to You can set the parameter, if you want to restore the factory state, please Click Default. 3.menu File Measurement Click this menu and open the measurement interface. Setting 13/19

14 4.Photo & Video (double click file and open it) 14/19

15 5. Measurement interface 6. Tool bar Save Export Word/Excel pause/ Play measurement Back Line parallel angle Dot to line Rectangle Polygon Ellipse Circle Arc label Text Ruler 7. menu introduction File Measurement Setting 15/19

Human eye distortion or defocus could cause measurement tolerance. More practice is helpful to measurements.

16 8. Measurement (1) Calibration Before measurement, please do calibration to make sure a certain accuracy. Our experience tells us that the measurement accuracy can be controlled to as high as 99%. Human eye distortion or defocus could cause measurement tolerance. More practice is helpful to measurements. Step 1,Click,and press add Step2, Shooting calibration ruler calibrate the ruler Step3,Record key information and save it 16/19

17 2. Measurement 1 Press to save picture. 2 17/19

18 Press to save picture. 3 Press 4Export result to save picture. Press, then export the file selected. 18/19

19 19/19

Unimake. Thank you for purchasing our USB Digital Microscope, it is a slim type tool and can be easily used. in different fields, including:

Unimake. Thank you for purchasing our USB Digital Microscope, it is a slim type tool and can be easily used. in different fields, including: Thank you for purchasing our USB Digital Microscope, it is a slim type tool and can be easily used in different fields, including: 1. Textile industrial for textile inspection 2. Printing inspection 3.