M-570 USB 4-CH Wireless. Sound Box

Size: px

Start display at page:

Download "M-570 USB 4-CH Wireless. Sound Box"

James Blankenship
5 years ago
Views:

1 M-570 USB 4-CH Wireless Sound Box User Manual Ver All brand names and trademarks are properties of their respective owners.

2 Contents: Chapter 1: Introduction Product Introduction Features System Requirements Package Contents Hardware Description... 5 Chapter 2: Getting Started Driver Installation Installation for Windows Installation for Mac OS X Power up Setup Quadraphonic Surround Sound Setup for Windows Setup for Mac OS X MN Page 2

3 Chapter 1: Introduction 1.1 Product Introduction This device enables you wirelessly transmit music from your PC or Notebook to your speaker, headset without messy wires. Just simply insert wireless audio dongle to your computer, and connect your speaker or headset to the wireless audio box, then you will enjoy great quality music. 1.2 Features Stream music from your PC/Laptop to your HiFi system or Speaker wirelessly Transmitter interface: USB 2.0 Receiver Audio Output Interface: 3.5mm Stereo Audio Jack Proprietary 2.4GHz Wireless solution Very low audio latency (<43ms) Operational Range: Up to 10 meters 4 channels audio out 48Khz, 16-bit DVD sound quality MN Page 3

4 Get started in 3 steps - Connect, Power on Play Plug and play, no driver / software installation needed Automatically pairing Compliant with USB Audio Device Class 1.3 System Requirements PC or Mac with one USB port Windows 7/8.1/10; Mac OS X v10.x or higher 1.4 Package Contents 1 x Wireless Audio Dongle 1 x Wireless Audio Box 1 x User Manual 1 x Power adapter Note: Contents may vary depending on country/market. MN Page 4

5 1.5 Hardware Description Figure 1: Wireless Audio Dongle (USB Transmitter) 1. Pair Button 2. Status LED When the transmitter is plugged into available USB port, a Status LED of the transmitter blinks green. It then lights a solid green until there is an audio to transmit. MN Page 5

6 Figure 2: Wireless Audio Box (Receiver) 3. Volume 4. Mute 5. Volume + 6. Pair Button 7. DC IN Power Jack 8. Headphone 9. Front Speaker 10. Surround Speaker 11. Status LED MN Page 6

7 When the power supply is plugged in, the Status LED of the receivers blinks blue. When the receiver and transmitter are communicating with each other, the Status LED turn a solid blue. Chapter 2: Getting Started 2.1 Driver Installation Installation for Windows 1. Close all various media player application such as Windows Media Player, itune and etc before plugging the Wireless Audio Dongle into the PC/laptop. Windows will detect the Wireless Audio Dongle automatically. 2. To verify whether the device is working. Select Control -> Device Manager. Entry Sound, video and game controllers item, USB 4CH Wireless Audio as show in the figure below. MN Page 7

8 2.1.2 Installation for Mac OS X 1. Close all various media player application such as Quick time player, itune and etc before plugging the Wireless Audio Dongle into the PC/laptop. Mac OS X will detect the Wireless Audio Dongle automatically. 2. To verify whether the device is working. Go to Preferences -> Sound. Under the properties of Sound -> Output tab, depending on the PC/laptop, all various audio devices available in the system will be displayed. Make sure that USB 4CH Wireless Audio is selected as show in the figure below. MN Page 8

9 2.2 Power up 1. Plug the bundled power adapter into the power jack of the Wireless Audio Box (Receiver). 2. Press the Pair button on the receiver unit for 3 seconds and release it, then press the Pair button on the USB transmitter for 1 sec. You will see the LEDs will keep on once it paired successfully. Note: By default the USB transmitter and receiver units are pre-paired in the factory so the user doesn t require to pair it again when connect it to the PC/laptop. MN Page 9

2.3 Setup Quadraphonic Surround Sound 2.3.1 Setup for Windows 1. Clicking on Start>Control Panel>Hardware and Sound>Sound.

10 2.3 Setup Quadraphonic Surround Sound Setup for Windows 1. Clicking on Start>Control Panel>Hardware and Sound>Sound. Depending on the PC/laptop, all various audio device available in the system will be displayed. Make sure that USB 4CH Wireless Audio is selected as shown in the figure below. Then click on the Configure button. MN Page 10

2. In the Speaker Setup Window, choosing Quadraphonic. Make sure the speakers that connected to the Wireless Audio Box (Receiver) are turned on and the volume is turned up enough so you can hear them.

11 2. In the Speaker Setup Window, choosing Quadraphonic. Make sure the speakers that connected to the Wireless Audio Box (Receiver) are turned on and the volume is turned up enough so you can hear them. Click the Test button and listen as Windows tests each of the speakers Setup for Mac OS X 1. Open the Audio MIDI Setup application (Located in your Utilities folder). 2. Select USB 4CH Wireless Audio, then click on the Configure Speakers button. MN Page 11

12 3. Click the Multichannel tab and choose Quadraphonic. MN Page 12

Bluetooth Music Receiver

Bluetooth Music Receiver User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2 Features...