EziNav G3 User Manual

Transcription

1 EziNav G3 User Manual 4.3 Touchscreen GPS with Bluetooth

2 About this User Manual Congratulations on your purchase of your Kogan EziNav G3 GPS. This user manual provides information regarding the various features of the device and how to use them. For a detailed explanation of how to use the igo software please download the separate user manual. The following are major sections of this user manual. Table of Contents: Chapter 1: Introducing the EziNav G3 Product Features. Safety Precautions.. What s in the Box... Chapter 2: Basic Operations Overview of the Device. Turning the Device On and Off. Charging the Device... Connecting the Device to your Computer.. Chapter 3: Menu Operations Overview GPS... Music.. Video... Photo... Ebook.. Flash... Bluetooth..... Games.. Tools.... Settings.... GPS Info Chapter 4: Troubleshooting Tips. 19 pg. 2

3 Introducing the EziNav G3 Product Features: The EziNav G3 comes with all the necessary features for you to begin navigating to your destination with ease. It features the following: AtlasIII 400MHz CPU with Bluetooth 4.3" Touchscreen LCD, anti-glare, 65,536 colours, 480 x 272 resolution 64MB NAND flash on board, 64MB SDRAM Built-in GPS module, 20-channel SiRF Star III chipset - very precise Built-in Bluetooth 2.5mm Headphone Jack 2.5mm AV Jack Music Player (mp3, wma, wav) Video Player (divx, avi, wmv, mpeg, asf, flv) Photo Browser (jpg, bmp) ebook Viewer (txt) SD/MMC slot (up to 2GB) Rechargeable Lithium-Ion 1600mAh (Up to 1.5 hours life) Weight: 236 grams Size: 122 x 81 x 16 mm pg. 3

4 Safety Precautions: Please ensure the GPS is correctly mounted in your Car to avoid it flying around. Failure to correctly mount the GPS could result in it being thrown out of lowered windows during turns. Do not clean the GPS with Chemical liquids or detergents, as it will damage the appearance of the device. Do not disconnect when formatting, uploading or downloading content, since the Firmware may be damaged. Please ensure you have a backup of all your files. Do not expose the Windshield mount to excessive temperatures in a car, as it will become deformed. Formatting the SD Card will cause the GPS Navigation software to be erased, rendering the device unusable GPS Devices can be distracting to drivers, please ensure you always maintain concentration on the road. What s in the Box: The following items will be included in the box with the GPS: 1 x EziNav G3 GPS 1GB SD Card Very sturdy suction adapter for in car mounting Wall socket AC adapter Car charger Ergonomic headphones USB cable Carry case pg. 4

5 Basic Operations Overview of the Device: Power Button Menu Button Turning the Device On and Off: To turn the device on, press the Power Button. The GPS will then load the main menu. To turn the device off, press and hold the Power Button. The GPS will prompt you to select Sleep or Power Off. It will automatically power off within 20 seconds if no choice is selected. Use the sleep function where you want the GPS to wake from the same screen you were in. Charging the Device: To Charge the GPS, please connect the Home Charger to the Unit using the Mini-USB connector. The GPS will display a Red light if it is being charged. Once charged this will turn Blue. You can also charge the device using the Car Charger or by connecting it to your Computer. Please note that this will take longer to charger the unit than the Home (Wall) Charger. pg. 5

6 Connecting the Device to your Computer: Use the supplied USB Cable and connect one end into your Computer and the other end into your GPS. There are several different ways of using the USB Connection: 1) Mass Storage (Default) This will allow you to copy files to the Device and it will appear as a removable disk 2) MS Activesync This will allow you to synchronize your Device with the computer (This is only recommended for Advanced Users) When Mass Storage is the selected Option, connecting the USB to the Device will prompt you to select how you would like to use the device. You can either use the Computer to charge (Press the Battery Icon) or as a Removable Disk (Press the USB icon) If you select the USB icon, you will not be able to use the device whilst it is connected unless you press the Power button in the top right corner. pg. 6

7 Menu Operations When the GPS first loads it will display the Main Menu. From here you can choose what you would like to do. To move between Menu s press the options at the bottom of the screen. Then to see more information about that selection, press the middle of the Screen. It will then load the selected function. Battery Indicator: This will show you how much Battery Life remains GPS Information: This will bring up the GPS Information screen with details including Latitude and Longitude. See Page for more information Bluetooth Indicator: This will bring up the Bluetooth menu See Page for more information FM Transmitter Indicator: This model does not have an FM Transmitter Volume Indicator: This will allow you to change the volume pg. 7

8 GPS: Select the GPS Option from the Bottom of the screen. Press the GPS Display in the middle of the screen. It will then load the Navigation software from the SD Card. If no SD Card is inserted pressing this button will not do anything. If you have correctly followed instructions the screen below will momentarily display the following screen before loading the GPS software: For Navigation software specific usage instructions, please refer to the GPS Navigation software manual available from the Kogan Website. Music: Select the Music Option from the Bottom of the screen. pg. 8

9 This will then load the Music Player. You can then play music that you have loaded onto the SD Card. Press the Playlist button (Green button above) to find the music and add it to your playlist. Once you have added your songs to the Playlist press Play. You can change the position of the track which you are listening to by using the Bar at the bottom left of the screen. Volume control is done by moving the bar at the bottom right of the screen. You can modify the equalizer to get a better sound, as you wish. To continue playing music in the background press the minimize button, otherwise press the power button to exit to the main menu. pg. 9

10 Video: Select the Video Option from the Bottom of the screen. This will then load the Movie Player. You can then play Videos that you have loaded onto the SD Card. Press the Playlist button to select the movie to watch and it will load. Double tap the video to go to full screen and do the same to go back. You can change the position of the video which you are watching by using the Bar at the bottom left of the screen. Volume control is done by moving the bar at the bottom right of the screen. Press the X button to go back to the main menu. pg. 10

11 Photo: Select the Photo Option from the Bottom of the screen. This will then load the Photo Viewer. You can then display Photos that you have loaded onto the SD Card. Press the Folder button to select photos to view. The buttons (from left to right) are: Go to previous/next photo Zoom In/Out Rotate Slideshow Select Files Exit pg. 11

12 Ebook: Select the Ebook Option from the Bottom of the screen. This will then load the Ebook Reader. You can then read Text Files that you have loaded onto the SD Card. Press the Document button to select the file to view. The buttons (from left to right) are: Select Files Previous/Next Font Settings Color Settings Bookmark Bookmark Viewer To exit, press the power button at the top pg. 12

13 Flash: Select the Ebook Option from the Bottom of the screen. This will then load the Ebook Reader. To exit, press the power button at the top Bluetooth: Select the Bluetooth Option from the Bottom of the screen. This will then load the Bluetooth Menu. pg. 13

14 This will give you a number of options: 1) Dial 2) Dial Record 3) Redial 4) Pair 5) Setting 6) Pair Record 7) GPRS 8) IE The status will be displayed at the bottom of the screen. To Pair your Phone press Pair It will begin counting down from 60. Whilst it is doing this search for the GPS on your Mobile Device. pg. 14

15 The Default name for the GPS is PND. Once it has detected the device, enter the Pin (8888 by Default to pair the devices) You may then need to select Connect on your phone to ensure the devices are paired. If it is successful the GPS will display Connected Establish. You can then dial a number from the GPS by following the prompts. To exit, press the power button at the top Games: Select the Games Option from the Bottom of the screen to access your choice of 7 games pg. 15

16 Tools: Select the Tools Option from the Bottom of the screen to access the calculator and unit converter. Settings: Select the Settings Option from the Bottom of the screen to access the device settings. You will be able to change settings relating to: Volume Backlight Language FM Transmitter (This is not functional in this unit) Date/Time Calibration (*Note: Run this if the Touchscreen does not seem to be functioning properly*) pg. 16

17 Sys Info USB (This will change the method of connection) Factory Reset (*This will wipe out all your settings*) Nav Path (*Do not change this unless you are using different software*) *Make sure you press the Disk at the top to save your settings* pg. 17

18 GPS Info: Select the GPS Info Option from the Bottom of the screen to access statistics regarding the GPS receiver such as Location and Speed To exit, press the power button at the top pg. 18

19 Troubleshooting Tips: If your GPS freezes, use the Stylus to press the reset button. If you try to connect the GPS to your Mobile using Bluetooth and it will not connect, press the reset button and it will resolve the issue. To restore the GPS back to factory settings Go to System => Factory Reset and press OK. If you are not getting a Signal in the GPS Software check the following: Go to GPS Info and see if it is detecting a signal If yes, then make sure the Navigation is properly configured and the GPS is enabled in the software If no, then press Reset and the GPS receiver will be reset If pressing the Navigation button does nothing, check the contents of the SD Card and make sure all the files are still there. If the SD Card has been formatted and you need a new copy of the maps please contact Kogan Support. **We reserve the right to charge a fee to supply a new copy of the software where there has been user error** If you have other issues please contact Kogan Support: support@kogan.com.au pg. 19