GV-IP Speed Dome Version History

Transcription

1 Contents Firmware V Firmware V Firmware V Firmware V Firmware V Firmware V Firmware V Firmware V Version History 1 4/11/2018

2 GV-IP Speed Dome Version History Firmware V Firmware V1.11 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S / 2300 / 2301 A garbled notification message shown when applying an IP address already filtered for or trying to filter more than four IP addresses in IP Filter Setting Certain network security vulnerabilities Improved: PSIA protocol no longer supported Version History 2 4/11/2018

3 Firmware V Firmware V1.08 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S / 2300 / 2301 Support for new model GV-SD2301 Inability to enable AAC codec through GV-IP Device Utility Version History 3 4/11/2018

4 Firmware V Firmware V1.07 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S / 2300 Support for ICR schedule function Disruption of the quality settings on Milestone with ONVIF connection after Bitrate is set to zero Version History 4 4/11/2018

5 Firmware V Firmware V1.06 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S / 2300 Support for new model GV-SD2300 Support for new GeoVision DDNS server (.gvdip.com) Support for the Recording Profile function with which recording frame rate is kept at 30 fps and bit rate at 4 Mbit at the maximum to ensure reasonable amount of data writing to the memory card SSLv3 vulnerability in OpenSSL library Interruption to the network when the camera is connected through a PPPoE and the camera s date and time is configured to synchronized automatically with a Network Time Server Failure to record to Micro SD card when the resolution is set to 1280 x 720, frame rate to 60 fps and split interval to 3 to 5 min Instable frame rate when recording to Micro SD card with the bit rate of CBR to 6 Mbit or above Possible ONVIF connection failure with Milestone (8.6c) after motion settings Incorrect FPS display of Stream 2 to 60 fps on GV-VMS Failure to change the maximum bit rate of the IP Speed Dome through GV-SNVR or GV-VMS Failure to access GOP setting of the IP Speed Dome through GV-SNVR or GV-VMS Incorrect frame rate when the resolution is changed from 1080p to 720p on GV-System (GV-DVR / GV-NVR) under the Fast connection type (LAN, TI, Wireless 802a/g, ADSL-high speed) Failure to access input status of device No.2 to 4 using CGI command Modified: Video Slice Mode setting which is no longer supported The E-Map setting which is no longer supported in non-ie browsers Version History 5 4/11/2018

6 Firmware V Firmware V1.05 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S Improved: Support for OSD text overlay on videos over RTSP protocol, ONVIF protocol and third-party software integration Support for new CBR bitrate settings with 1920 x 1080 resolution at 1024 Kbps and 512 Kbps, and 1280 x 720 resolution at 512 Kbps Version History 6 4/11/2018

7 Firmware V Firmware V1.04 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S Support for GV-SD220 / 220-S PoE Version Support for CGI Command Random failure of Web Interface display Version History 7 4/11/2018

8 Firmware V Firmware V1.02 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S Support for new model SD220S-30x Support for Internet Explorer 11 Support for ONVIF Profile S with motion detection, frame rate, quality, dual streaming, GOP, PTZ and I/O trigger settings Large recording size and possible live view failure when the camera is set to 2 fps and 0.25 seconds (GOP) Encoding efficiency for recording stability Incorrect recording length when saving the first file to the local storage Disruption of live view due to frame skipping when recording motion and saving to the local storage Improved: Support for 2 more frame rate options (3, 5, and 20 fps) Live view quality by increasing the frame rate when the camera is accessed by multiple systems through ONVIF or RTSP Modified: Default setting of Video Slice Mode from Auto to Single Wording on German interface Support for ONVIF Test Tools V13.06 Default maximal bitrate for Variable Bitrate (VBR) GV-IP Speed Dome 720 P Max. bitrate for VBR 8 Mbit 4 Mbit Version History 8 4/11/2018

9 2 MP 10 Mbit 4 Mbit Default resolution for Stream 2 changed from Close to CIF Version History 9 4/11/2018

10 Firmware V Firmware V1.01 applies to the following GV-IP Speed Dome models: GV-SD220 / 220-S Support for Max. Gain Limit with which the camera can analyze the brightness of the image and enhance the image when it is pixilated and noisy due to insufficient light Possible disconnection and resumption of live view due to encoding errors Live view throbbing when CBR (Constant Bitrate) is set to 4 MP or below Possible disruption of device time settings after reboot Disruption of the PTZ Schedule settings when the Start-Up Action and Idle Protection functions are enabled and the Idle Protection time is set to 0 (minute) Improved: Waiting time for logging in the live view Recording efficiency and stability in which recorded files remain accessible when power is disrupted during monitoring (recording) Live view quality by increasing the frame rate when the camera is accessed by multiple systems through RTSP Modified: Storage mechanism, for which the user, after device firmware upgrade, needs to back up the data in the SD card and format the SD card before recording again GOP and frame rate per second settings in which the GOP setting automatically changes to a specific value as the frame rate per second setting changes Stream settings for GV-Video Gateway and GV-Recording Server in which the stream 2 option is removed ViewLog server setting in which the ViewLog service is now enabled by default Recording setting in which the Continue recording to the local storage option is enabled by default Version History 10 4/11/2018

11 Maximum number of RTSP / 3GPP connection to the camera, which is changed from 10 to 8 Default audio setting of RTSP, which is now enabled Maximal bitrate setting which is changed to 8 MB Version History 11 4/11/2018