49BDL5055P/11 V User Manual (English)

Size: px

Start display at page:

Download "49BDL5055P/11 V User Manual (English)"

Piers Taylor
5 years ago
Views:

1 /11 V User Manual (English)

2 Safety Instructions Safety precautions and maintenance shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: Maintenance: - - IMPORTANT WARNING Service: ii

3 Read and follow these instructions when connecting and using your display: IMPORTANT iii

4 Table Of Contents 1. Unpacking and Installation Parts and Functions OSD Menu Input Mode Cleaning and Troubleshooting Operation iv

5 SOURCE LIST ADJUST ID SET NORMAL ID FORMAT INFO OPTIONS VOL ENTER 1. Unpacking and Installation 1.1. Unpacking 1.2. Package Contents * The supplied power cord varies depending on destination. Power Cord RS232 Cable Remote Control and AAA Batteries RS232 Daisy Chain Cable Warranty card Quick start guide DVI-D Cable D-sub Cable DVI/D-sub converter Philips logo Thumb Screw x 8 Edge Alignment Kit-1 x 2 Edge Alignment Kit-2 x Installation Notes 1

6 1.4. Installing and Removing Table Stands (optional) To install table stands: To remove table stands: 2

7 1.5. Mounting on a Wall Protective Sheet VESA Grid Table Tabletop stand VESA Grid Caution: Ventilation Requirements for enclosure locating 100 mm 100 mm 100 mm 100 mm 3

8 1.6. Mounting in Portrait Position

9 1.7. Operating Instructions of Edge Alignment Kit Installing Edge Alignment Kit 5

10 2. Parts and Functions 2.1. Control Panel MUTE INPUT MENU 9 1 [ ] button 2 [MUTE] button 3 [INPUT] button 4 [ ] button 5 [ ] button 6 [ ] button 7 [ ] button 8 [MENU] button 9 Remote control sensor and power status indicator SCHEDULE - - 6

11 2.2. Input/Output Terminals AC IN 2 MAIN POWER SWITCH 3 AC OUT 4 IR IN / 5 IR OUT 6 RS232C IN / 7 RS232C OUT 8 LINE IN 9 AUDIO OUT 10 HDMI1 IN / 11 HDMI2 IN 12 DVI-I IN 13 DVI OUT / VGA OUT 14 DisplayPort IN / 15 DisplayPort OUT 16 RJ USB PORT B 18 SECURITY LOCK 19 USB PORT A 20 USB PORT A (only for charging) USB 5V/2A 21 MICRO USB 22 MICRO SD CARD 7

12 2.3. Remote Control NAVIGATION buttons [ ] Root Menu Main Menu [ ] Root Menu Main Menu [ ] Main Menu Source Menu Volume Menu [ ] Main Menu Source Menu Volume Menu 7 [ ] button Root Menu: Main Menu 8 [ ] ADJUST button 9 [ ] MUTE button 10 [ ] [ ] [ ] [ ] COLOR buttons [ ] 11 [Number/ ID SET/ ENTER] button 1 [ ] POWER button 2 [PLAY] buttons Freeze feature Pause 3 [ ] SOURCE button Root Menu 4 [ ] HOME button Root Menu Others 5 [ ] LIST button ID Remote Control 12 [ ] FORMAT button 13 [ ] BACK button 14 [ ] INFO button 15 [ ] OPTIONS button 16 [ ] [ ] VOLUME button

13 ID Remote Control ID ENTER NOTE: NORMAL 9

14 Remote Control buttons on Android source [ ] SOURCE button 4 [ ] HOME button 5 [ ] LIST button 6 NAVIGATION buttons 1 [ ] POWER button 2 [PLAY] buttons»» 10

15 7 [ ] button 8 [ ] ADJUST button 9 [ ] MUTE button 10 [ ] [ ] [ ] [ ] COLOR buttons 11 [Number/ ID SET/ ENTER] button 12 [ ] FORMAT button 13 [ ] BACK button 14 [ ] INFO button 15 [ ] OPTIONS button 16 [ ] [ ] VOLUME button Inserting the batteries in the remote control Caution: Handling the remote control 11

16 Operating range of the remote control horizontal and vertical angle of less than 30 degrees

17 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC Using DVI-I input PC Audio Out VGA Out [VGA AUDIO IN] [DVI IN] 13

18 Using DVI input PC Audio Out [VGA AUDIO IN] DVI Out [DVI IN] Using HDMI input PC HDMI Out [HDMI IN] Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 14

19 3.3. Connecting Audio Equipment Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT] Connecting Multiple Displays in a Daisy-chain Configuration Display control connection DISPLAY 1 DISPLAY 2 PC [RS-232C] [RS-232C IN] [RS-232C OUT] [RS-232C IN] DISPLAY 1 DISPLAY 2 PC [RJ-45] [RJ-45] [RS-232C OUT] [RS-232C IN] 15

20 Digital video connection DISPLAY 1 DISPLAY 2 PC [DVI] [DVI IN] [DVI/VGA OUT] [DVI IN] DISPLAY 1 DISPLAY 2 PC [DP] [DP IN] [DP OUT] [DP IN] DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] Analog video connection DISPLAY 1 DISPLAY 2 PC [VGA] [DVI-I IN] [DVI-I OUT] [DVI-I IN] 16

21 3.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [IR IN] [IR OUT] [IR IN] IR IN 3.6. IR Pass-through Connection [IR OUT] DVD / VCR / VCD [IR IN] (DVD / VCR / VCD) Remote Control 17

22 4. Operation NOTE 4.1. Watch the Connected Video Source [ ] SOURCE [ ] [ ] [ ] 4.2. Change Picture Format [ ] FORMAT [ ] [ ] [ ] Full 4:3 1:1 16:9 21:9 Custom Full 4:3 1:1 16:9 21:9 Custom 4.3. Overview 18

23 4.4. Media Player introduction: 19

24 20

25 4.5. Browser manual 21

26 22

27 23

28 4.6. PDF reader play 24

29 Media Hotkey: Color Hotkey: Arrow keys: Combination key: 4.7. CMND & Play 25

30 Save Forget Cancel 4.8. Custom App OSD Menu operation: Function Introduction 26

5. Signage display 5.1. Setting 5.2.1. DHCP 5.

31 5. Signage display 5.1. Setting DHCP Static IP 5.2. Ethernet 5.3. Proxy

32 Proxy Main Switch Disable Enable Proxy settings Proxy hostname Proxy port Type HTTP Authentication Authentication Username Password General Settings 5.4. Signage Display 28

33 29

34 Set up screenshot End time Note 30

35 Server Settings 31

36 32

37 Source Settings 33

38 Security 34

39 Others Clear Storage Factory Reset 5.5. System Tools 35

5.5.3. Import & Export 5.5.3.1 Export Signage Display Settings 5.6.

40 Import & Export Export Signage Display Settings 5.6. Clone Media File Import Signage Display Settings 5.7. Display 36

5.8. Storage 5.10. Security 5.10.1.Credential storage 5.

41 5.8. Storage Security Credential storage Date & time 5.9. Apps 37

42 5.12. About Legal Information System updates 38

43 6. OSD Menu 6.2. OSD Menu Overview Picture menu 6.1. Navigating the OSD Menu Picture Brightness Contrast Navigating the OSD menu using the remote control SOURCE FORMAT Screen Audio Sharpness Black level Tint Color P PIP Noise reduction Gamma selection Medium Native LIST INFO Configuration 1 Color temperature Color control Native [ ADJUST OPTIONS ] [ ] [ ] OK [ ] [ ] [ ] [ ] [ ] OK [ ] [ ] [ ] [ ] Smart picture [ ] Audio source Navigating the OSD menu using the display s control buttons MENU ] MENU MENU Brightness(Picture) Contrast Sharpness Black level Tint(Hue) Color(Saturation) Noise Reduction Gamma selection Color temperature CCT X Y 39

Color control Smart picture Smart Contrast Surface Ratio Smart power Backlight Setting Overscan Picture reset V position Clock Clock phase Zoom mode Full 4:3 1:1 16:9 21:9 Custom Full 4:3 1:1 16:9

44 Color control Smart picture Smart Contrast Surface Ratio Smart power Backlight Setting Overscan Picture reset V position Clock Clock phase Zoom mode Full 4:3 1:1 16:9 21:9 Custom Full 4:3 1:1 16:9 21:9 Custom And the INFO OSD will show the latest setting Full 4:3 1:1 16: Screen menu H position Picture V position Clock Screen Clock phase Zoom mode Audio Custom zoom P PIP Auto adjust Screen reset Configuration 1 Full Zoom Action Action :9 Custom Custom zoom Zoom mode Custom H position 40

Auto adjust Zoom H zoom V zoom H position V position Screen reset Screen 6.2.3.

45 Auto adjust Zoom H zoom V zoom H position V position Screen reset Screen Audio menu P Picture Screen Audio PIP Configuration 1 Balance Treble Bass Volume Audio out(line out) Maximum volume Minimum volume Mute Audio source Sync.Volume Off Analog Off Maximum volume Minimum volume Mute Audio source Sync. Volume Card OPS audio Audio reset Audio PIP menu P Picture Screen Audio PIP Configuration 1 Sub mode Sub mode PIP size PIP position PIP change PIP source PIP audio PIP reset Off PIP Quick swap PBP Off Small Bottom-Right Action VGA Main Action Off PIP PBP 2Win Balance Treble Bass Volume Audio out (line out) PIP size Quick swap Input Small Medium Large 41

46 PIP position Bottom-RightBottom-LeftTop-RightTop-LeftCenterCustom PIP change PIP / PBP / Quick swap PIP source PIP audio PIP reset PIP O X Configuration1 menu P Picture Screen Audio PIP Configuration 1 Switch on state Switch on state Panel Saving RS232 routing Boot on source WOL DDC/CI Light sensor Human sensor Power LED light Configuration1 reset Last status Action RS232 Action Off On Off Off On Action Power off Forced on Last status Panel saving Brightness On {Auto} / {10 ~ 900} Off RS232 routing RS232 RS232} Boot on source WOL DDC/CI Light sensor (require Philips accessory CRD41 External Sensor Box) Human sensor (require Philips accessory CRD41 External Sensor Box) Power LED light 42

47 Factory reset Picture Screen Audio PIP Advanced option [ ] [ ] Reset [OK] Factory reset Cancel Configuration2 menu Configuration 2 Advanced option OSD turn off OSD H-position OSD V-position OSD transparency Information OSD Logo Monitor ID Heat status Monitor information DP version Reset off 10 Sec. On Action Action Action DP 1.1 OSD turn off 0 ~ 120 OSD H-position OSD V-position OSD Transparency Information OSD Off 1 ~ 60 Logo Monitor ID Monitor group Auto ID} Monitor Id Monitor group Monitor Id Monitor group Tiling matrix Auto ID Off 1-254} End } Auto ID Monitor ID Auto ID} Start End End Heat status 43

48 Monitor information DP version DP 1.1 Default DP 1.2 SST DP 1.2 MST Window selection MainDefault PIP [ ] Rotation Language Advanced option menu Configuration 2 Advanced option Input resolution Input resolution IR control Keyboard control Tiling Off timer Date and time Schedule HDMI with One Wire Auto signal detection Power Save Auto Action Action Action Off Action Action Off Action Mode 4 VGA } } } Auto IR control Normal} Lock All Lock all but Volume Lock all but Power {Lock all INFO Keyboard control Unlock Lock All Lock all but Volume Lock all but Power Lock all - [ ] Tiling (up to 10-sets on the vertical 44

49 and 15-sets on the horizontal sides) Brightness Normal ACS Source resolution H monitors V monitors Position Frame comp. Off Timer Date and time Date and time Auto Sync No Schedule Date and time OK [ ] Schedule Year 2015 Month 1 Day 1 Hour 22 Minute 40 Daylight saving time Current date time : 41 : 00 Press [OK] to set clock Today On : SUN 04 : 14 : 01 MON WED THU SAT SUN playlist 0 Off Input : TUE FRI Every week Clear all OK [ ] [ ] Year Month Hour Minute [ ] [ ] time OK [ ] [ ] [ ] [ ] [ ] [ ] OK Schedule Today SUN 04 : 14 : On Off Input : : MON WED THU SAT SUN playlist 5 0 TUE FRI Every week Clear all [ ] [ ] 1 Power-on [ ] [ ] 4 45

50 2 Power-off [ ] [ ] 3 Input-source [ ] [ ] 4 Date [ ] OK 5 Input-source USB HDMI with One Wire Off} On Auto signal detection Off All} Failover} All Failover Power Save Scalar FW Update USB cloning 46

51 OPS setting Advanced option reset Date and Time Advanced option OK [ ] [ ] [ ] Reset OK Cancel OK 47

52 7. USB device compatibility USB Multimedia Codec Formats Video Decode Audio Decode 48

53 Image Decode 49

54 8. Input Mode VGA Resolution: SD Resolution: HD Resolution: INPUT 50

55 9. Pixel Defect Policy 9.1. Pixels and Sub-Pixels subpixel pixel 9.2. Types of Pixel Defects + Dot Definition R G B 9.3. Bright Dot Defects 51

56 9.4. Dark Dot Defects 9.5. Proximity of Pixel Defects 9.6. Pixel Defect Tolerances 9.7. MURA HOW TO SPOT MURA HOW TO AVOID MURA 52

57 10. Cleaning and Troubleshooting Cleaning Caution When Using the Display Front Panel Cleaning Instructions Cabinet Cleaning Instructions Troubleshooting Possible Cause noise is heard Color is abnormal Picture is distorted with abnormal patterns screen 53

58 Can hear sound, but no picture Can see picture but no sound is heard Mute [ ] [ ] [ ] Some picture elements do not light up of still pictures include logos, video games, normal mode) How to setup the settings in the menu to control all the monitors at the same time and 54

59 11. Technical Specifications Display: Item In/Out Terminals: Item 55

60 General: Item Product Fiche : Item Environmental Condition: Item Internal Speaker: Item 56

61 2017 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.

55" 10-point Multi-touch Commercial Display

55 10-point Multi-touch Commercial Display 55" 10-point Multi-touch Commercial Display CDM5500T 24 hours a day 7 days a week operations Built-in Quad Core Media Player with 16GB Storage Embedded LAN and Wi-Fi Internal Scheduler Content Management