IMPORTANT SAFETY INSTRUCTIONS

Size: px

Start display at page:

Download "IMPORTANT SAFETY INSTRUCTIONS"

Douglas Hampton
5 years ago
Views:

Retain instructions - The safety and operating instructions should be retained for future reference. 3.

2 SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated and should be saved for future reference. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow instructions - All operation and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall and Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance. 13. Protective Attachment Plug - The appliance is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the

3 original plug. 14. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 15. Power Lines - An outdoor antenna should be located away from power lines. 16. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No , provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 17. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 18. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 19. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 20. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. This symbol indicates that this product Incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. CAUTION: A. The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the unit. Nor should the unit be exposed to high-moisture areas. Ventilation should not be impeded by covering any of the unit's openings with any kind of item. Allow the unit to have access to air on all sides and keep away from any warm / heated surfaces / appliances. Installation / Setup - Horn Speaker 1. Insert the bearing support arm in the rear of the turntable body located with an insert. 2. After Inserting the bearing support arm, fasten with screws to the turntable body. (Reference Installation drawings below) Screws to fix the base of the speaker horn then onto the back of wooden case. Be sure as to install carefully and not to overtighten screws.

4 Installation / Setup - Horn Speaker Bugle Core Horn Firstly, connect the 'Acoustic Pipe' to the rear of the turntable unit and secure with screws. Be sure as to install carefully and not to over-tighten screws. The 'Bugle Core' connects to the connection ring... Then the 'Connection Ring' connects to the 'Bugle Core', through the 'Horn'... Connection Ring Acoustic Angle Pipe This Horn assembly then connects to the 'Acoustic Angle Pipe'... Which then finally connects to the 'Acoustic Pipe' that is connected at the rear of the turntable unit. 'Acoustic Pipe' CAUTION: * Do not connect FM Wire Antenna to an external antenna. AC OPERATION: This OLD FASHION TURNTABLE AM/FM CASSETTE PLAYER operates from AC 110V/60Hz line power. Insert the plug of the AC power cord into a wall outlet with AC power supply. There are total three modes: Bluetooth, USB Play Back and Line input. Hold the Mode button for 3 seconds to switch between modes. MAINTENANCE - Cleaning the unit: -Do not use harsh chemicals to clean. Clean by lightly wiping with a soft cloth and a mild soap if necessary. Be sure to dry thoroughly. Cleaning the tape heads: -To assure continuous high performance from your cassette player/recorder, clean the head, pinch roller, and capstan preferably after 40 hours of operation. A cassette head cleaner cartridge or head cleaning fluid may be used. Follow the instructions that comes with the cassette or liquid head cleaner. Cleaning the CD player lens: -If dust is on the lens, blow the dust away by using a blower. -The lens should never be touched. However, if a finger-print does get on the lens, wipe it gently by using a cotton swab moistened with isopropyl alcohol. (Please consult your dealer for further troubleshooting and unit maintenance).

Function and Controls 5 3 4 6 7 1 8 9 23 14 18 2 26 27 28 29 24 25 13 12 11 10 15 16 17 22 19 20 21 30 31 1 Horn 16 CD Play / Pause 2 Speakers 17 CD Stop 3 Radio Dial 18 CD Open 4 Tuning Control 19

5 Function and Controls Horn 16 CD Play / Pause 2 Speakers 17 CD Stop 3 Radio Dial 18 CD Open 4 Tuning Control 19 Tone Arm 5 Function Selector 20 Styli 6 ON/OFF Volume Control 21 Turntable 7 SD Card Reader RPM Adaptor 8 USB Flash Reader 23 Speed Selector 9 CD Drawer 24 FM Wire Antenna 10 CD Track Display 25 AC Power Cord 11 CD Fast Forward 26 USB Record / Play Light 12 CD Rewind 27 Bluetooth Indicator Light 13 CD Program / Copy 28 Mode Switch 14 CD Random 29 USB Jack (Recording) 15 CD Repeat 30 Line Output 31 Aux Input

6 RECORDING FUNCTION : Under Line in mode, whenever playing radio, CD, tape or phono, you can record your favorite audio directly into the USB flash drive. Plug into the USB flash drive. When the red light is on, it is in Record Ready mode. USB will not play the audio in the USB slot. Short Press the Mode button once and the connected USB memory drive starts to record what is playing in the radio, CD, tape or Phono. When it s recording, the red light is flashing. Short Press the Mode button again and USB stops recording. Now the red light is on. In order to play the USB recorded audio, follow the USB Play Back Guideline The audio is recorded in the Record folder in the USB drive in MP3 file format. BLUETOOTH FUNCTION: Turn on your Bluetooth in your device. Search for Pyle Turntable and connect. When connected successfully, the blue light will remain on. The Bluetooth pairing will not connect to your device automatically. When the connection interrupts, you need to re-connect the turntable to your Bluetooth device. To ensure optimum Bluetooth sound quality, please remain within 30 feet of the product during connection. SD PLAY BACK FUNCTION : Place a compatible SD CARD into SD slot (the format of music should be MP3 or WMA). Ensure there is no media / music playing, and from USB MODE, press and hold the PLAY/PAUSE button for three seconds, it will switch to SD MODE. The digital LED display will flash the word CARD. The system will play all of the compatible audio files on your SD card. Once finished playing all songs, the system will revert to the first track and continue playing. If you would like to play CD disc, after the SD Memory Card Mode, press the STOP button to stop playing songs in the SD disc first, and then press and hold the PLAY/PAUSE button for three seconds. Or you can press OPEN/CLOSE button directly, to switch to CD Mode. LINE INPUT FUNCTION: "Line in function is the defaulted mode when the unit is on. (Includes radio, CD, tape and phono). Hold the Mode button to switch among the unit's different playing modes.

7 USB PLAYBACK Insert a compatible USB flash drive into the slot (the format of music should be MP3 or WMA). Turn the power switch to the CD position, and then hold PLAY/PAUSE button for three seconds, it would switch to USB state, LED displays CARD, and the USB Indication appears. The unit will automatically playback all of the compatible USB media on the flash drive, then repeat. If you would like to play a CD disc, press the STOP button to stop playing songs in the USB drive. Then press PLAY/PAUSE button for three seconds, it will switch to CD mode. Press the OPEN/CLOSE button directly, it will also switch to CD mode using this method. RADIO RECEPTION : Turn the VOLUME CONTROL clockwise until a click is heard, The blue indicator light is on. Set the FUNCTION SWITCH to "RADIO" position. Select required receiving band with the BAND SWITCH. Turn the TUNING CONTROL to select the desired radio station. Adjust the VOLUME CONTROL to obtain the desired sound level from the Speaker To turn the radio off, turn the VOLUME CONTROL Counter-clockwise until a click is heard. TIPS FOR GOOD RADIO RECEPTION Use the FM WIRE ANTENNA and fully extend into an open area. To insure best AM sensitivity, try repositioning the unit until the best reception is obtained. CASSETTE PLAYER OPERATION Set the FUNCTION SWITCH to TAPE". Insert the cassette fully into the cassette slot (No.27). Play starts automatically. To fast forward press the button in half-way. To eject, fully press down the button SKIP FUNCTION: SINGLE SONG SKIP While playing an audio file,press or (next or previous) button to navigate to the desired song. REPEAT MODES: 1. When playing disc, press REPEAT button twice, the repeat indication will blink (that denotes a single song will repeat playing.) 2. When playing disc, press REPEAT button three times, the repeat indication will blink (this denotes all songs will repeat playing.) 3. When playing disc, press REPEAT button four times, to exit from all REPEAT MODES and the system turns back to normal playing state.

8 COMPACT DISC OPERATION CD/MP3 DISC PLAYER Place the function selector to the CD position. Press the OPEN/CLOSE button, the tray will open, LED displays OPEN. Put the disc into the tray, keep the side with the label facing upward. Press the OPEN/CLOSE button will display LOAD. again, CD tray will draw back and close automatically, LED When a disc is inserted, the display will show the total number of songs; if the display reads 'no' it means the AUDIO file-types on the disc are not compatible with the unit. Choose another disc or ensure the file-types on the disc are MP3 format for successful audio file playback. Press PLAY/PAUSE button to start playing the song from the first file on the disc. The display shows the song number playing. The CD player will stop playing automatically once finished playing all the songs in the disc, then led displays the total number of the songs again. In the course of playback (sound will be broadcasted from the speakers of the turntable unit), if you press the PLAY/PAUSE button, it can pause and/or play your music. The display will show the current function of playback operation. Press the stop button, to stop the CD disc from playing. (NOTE: HOLDING THE BUTTON USB.) FOR THREE SECONDS CAN DIVERT FROM CD TO PROGRAM PLAYER MODE: When in the stopped mode (with no audio playing), press the PROG., the led will display. Press or to choose the song which you like, press the PROG. to confirm. Press or to choose the song which you like, press the PROG. to confirm, as the next song desired in the PROGRAM MODE (you can repeat the program at random. A CD can be programmed for up to 20 songs.) Press the PLAY button to start playing. For example, press the button PROG once when under the stop state, the digital LED displays, press to choose the second song press PROG once more, led displays ; press to choose the no.5 song, and press the button PROG again to confirm. then press the play button, it would start to play the no.2 and no.5 song which programmed just moment. Note: The program cannot be entered while music is playing. After entering into PROGRAM MODE, if you press the STOP button before pressing the PLAY/PAUSE button, all of the programmed songs will be cleared, that indicates the system failed to program. When finishing the programmed playing, make sure to remember to press the STOP button twice to cancel the program function, or else some of the functions will not be successful or will not play normally.

9 RANDOM / BROWSE PLAYER MODE: Pressing the RANDOM button while playing digital media audio files will allow Random mode. Please Note: The unit may take some time (10 seconds) to scan between audio files COPY FUNCTION The copy function is capable of copying a whole playlist on a CD disc to your USB flash drive.. The copy function will stop once your press the stop " button. For the copy function to work successfully, make sure there should be enough space on your USB drive for copying the desired amount of audio files. *Please note - not all file types are compatible with the COPY FUNCTION. PHONO OPERATION Turn the VOLUME CONTROL clockwise until a click is heard. Set the FUNCTION SWITCH to "PHONO" POSITION. Place a record onto the turntable surface. Note: First insert the 45 rpm adaptor in the center of the turntable then place the record -- if your record requires the 45 rpm adaptor to play. 1. Once your record is in place, set the SPEED SELECTOR to 33 ⅓, 45 or 78 RPM according to the size of the record you are wanting to play. 2. Taking out the stylus guard of the tone arm first, then place the electric tone arm on the record carefully. 3. Adjust the VOLUME CONTROL to obtain the desired sound level from the Speakers. 4. To stop operation, carefully lift up the TONE ARM and return it to TONE ARM-REST.

10 SET AUDIO INPUT & LINE OUT AUDIO LINE INPUT OPERATION If you would like to use the audio line-input function, to play audio from a connected device, please turn the function switch to the position of CD MODE (This acts as the INPUT MODE). Adjust the VOLUME control to obtain the desired sound level from the Speaker. 1.Set Audio INPUT Connecter: 2.Set Audio OUTPUT Connector: *Please Note: Before connecting your unit to any external devices / speaker systems, please turn off the power. Turn on the AC power again after connecting. Be sure the connecter is fitted and right into the connector jacks, or you may experience faulty operation / static / interference / noise. Make sure there is adequate 'slack' in any RCA connection or power cables. Visit www. for additional product information and support

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions - All the safety and operating instructions