True Wireless Stereo (TWS-X100) Bluetooth Sport Headset USER MANUAL

Transcription

1 True Wireless Stereo (TWS-X100) Bluetooth Sport Headset Trademarks USER MANUAL All brand and product names are trademarks or registered trademarks of Maka GPS Technologies Group. In association with Maka GPS Technologies Private Limited (Singapore), Maka GPS Technologies Sdn. Bhd. (Malaysia), Maka Technologies Group (H.K.) Limited. The information in this manual is subject to change without notice. 02/2017. R1.1 Page 1 of 17

2 Safety information To assure safety for yourself when using the headset, read the safety information about your headset and observe the guideline of usage and safety measure. Warning Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. Listen at reasonable volumes for reasonable periods of time. Be careful not to adjust the volume continuously upwards as your hearing adapts. Do not turn up the volume so high that you can t hear what s around you. You should use caution or temporarily discontinue use in potentially hazardous situations. Excessive sound pressure from earphones and headphones can cause hearing loss. Using headphones with both ears covered while driving is not recommended and may be illegal in some areas while driving. For your safety, avoid distractions from music or phone calls while in traffic or other potentially dangerous environments. Page 2 of 17

3 Caution Failure to comply with safety cautions and guideline can cause hearing damage. Do not expose the headset to excessive heat. Do not drop your headset. Do not allow your headset to be submerged in water. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product. The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like. If you notice strange smells or sounds coming from your headset or the case charger, stop using / charging the case or headset immediately and take it to Maka Service Centre or seek advised from Service Centre. Failure to do so may result in causing physical damage or device malfunction. Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 0 C to 60 C and humidity from 10% to 80% Not doing so may cause the headset to malfunction, result in damage, or cause the battery lifespan.. Page 3 of 17

4 Do not drop your case charger or cause impacts to it. Your charger may be damaged or may malfunction. If expose to excessive heat or submerge in water, your charger may be damaged or parts may malfunction. Ensure maximum battery and charger life Over time, unused headset or charger will have battery discharge and must be recharged before use. Disconnect the charger from power sources when not in use or is fully charged. Leaving batteries unused over time may reduce their lifespan and usage performance. It might also cause the batteries to malfunction discharge at a faster rate. Your device may wear out over time. Some parts and repairs are covered by the warranty within the validity period, but damages or deterioration caused by human error will not be covered Do not disassemble, modify or repair your device Any changes or modifications to your device can void your manufacturer s warranty. If your device needs servicing, take your device to a Maka Service Centre. Do not distribute copyright-protected material Do not distribute copyright-protected material without the permission of the content owners. Doing this may violate copyright laws. The manufacturer is not liable for any legal issues caused by the user s illegal use of copyrighted material. Page 4 of 17

5 Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Page 5 of 17

6 Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-commercial use. You may not use any content or services in a manner that has not been authorised by the content owner or service provider. Without limiting the foregoing, unless expressly authorised by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS. MAKA GPS TECHNOLOGIES GROUP DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. MAKA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MAKA GPS TECHNOLOGIES GROUP DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL MAKA GPS TECHNOLOGIES GROUP BE LIABLE, WHETHER IN CONTRACT O R TORT, FO R A NY DIRE C T, IN DI RE CT, I NCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Third party services may be terminated or interrupted at any time, and Maka GPS Technologies Group makes no representation or warranty that any Page 6 of 17

7 content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Maka GPS Technologies Group has no control. Without limiting the generality of this disclaimer, Maka GPS Technologies Group expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device. Maka GPS Technologies Group is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers. Page 7 of 17

8 About this manual This device provides high performance using Maka s high standards and technological expertise. This user manual is specially designed to detail the device s functions and features. Please read this manual before using the device to ensure safe and proper use. Descriptions are based on the device s default settings. Images and screenshots may differ in appearance from the actual product. Content may differ from the final product, or from software provided by service providers and is subject to change without prior notice. For the latest version of the manual, refer to the Maka website at Available features and additional services may vary by device, software. Applications and their functions may vary by country, region, or hardware specifications. Maka is not liable for performance issues caused by applications from any provider other than Maka. Maka is not liable for performance issues or incompatibilities caused by not installing the device as stated in this manual. Attempting to customize the installation may cause the device or applications to work improperly. This may result in device malfunctions and data corruption or loss. These actions are violations of your Maka agreement and will void your warranty.if you have questions about an application provided with the device, contact Maka Service Centre. Page 8 of 17

9 Table of Contents Product Specifications 10 Overview/Standard package of your TWS-X100 TM Device Layout 11 Charging Case/Earbud of TWS-X100TM Charging (Case and Earbuds) 12 Fitting of Earbud of your TWS-X100TM Fitting of Earbud 13 Pairing of Earbuds of TWS-X100TM Pairing of Earbud 14 Multi-Connection for TWS-X100TM Multi-Connection 15 Call Answering/ Music for TWS-X100TM Call Answering 16 End a Call 16 Call Waiting Answering 16 Reject an Incoming Call 16 Music Playing Control 16 Voice Command for TWS-X100TM Voice Command 17 General Troubleshooting Page 9 of 17

10 Product Specifications Bluetooth Version V4.1 Chipset Support profiles Operation range Talk time Music Time Standby time Charging Frequency range Frequency response AIROHA Headset, Handsfree, A2DP, AVRCP 10m Up to 240min in normal volume Up to 210min in normal volume 80 hours Distortion 1% Microphone sensibility Working voltage DC 5V 500MA GHz 20HZ-20KHZ 42db 3.0V-4.2V Working temperature 10 ~ +70 SNR (Signal-Noise Ratio) Waterproof Level Battery built-in headset Battery built-in power bank Charging times for earbuds Charging for case / earbud Product Info Charging case size 90dB IPX4 55mAh High performance Li- polymer battery 450mAh High performance Li-polymer battery 4 times on each fully Charged Case 2.5hours / 1.5hours 21.8*13.1*16.4*25.4mm 31.1*51.4*64.6mm Weight Single earbud: 4.7g, 1 pair earbud w/case: 46.1g Page 10 of 17

11 Device Layout Getting Started Overview / Standard Package of your TWS-X100 TM Package contents Check the product box for the following items: Charging Case Operating Manual 1 Pair Bluetooth Earbud with cap (Medium Size) Micro USB Cable 2 Pair Earbud cap (2 sizes Small, Large) Page 11 of 17

12 Getting Started Charging Case/Earbud of TWS-X100 TM Charging (Case and Earbuds) Use the charger to charge the casing and earbud before using it for the first time. Charge the casing by connecting via USB charger. Use only Makaapproved chargers, batteries, and cables. Unapproved chargers or cables can cause the battery to malfunction, explode or damage the case. If the case or earbud is not charging properly, take the device and the charger to a Maka Service Centre. While charging the case and earbud, red light will be light up on both led indicator. When its fully charged for both earbud and case, blue light will be on for 2 minutes and then goes off. -Bluetooth Earbuds Charging in Case Charging (without charging case) While charging the earbuds in the case, red light will be on both Led When earbud is fully charge, red light will go off. Note: This charging case support charging and discharging at the same time. Page 12 of 17

13 Fitting of Earbud GettingStarted Fitting of Earbud of your TWS-X100 TM Fit Remove the earbud from the case and carefully place in your ear. (choose the correct earbud rubber cap for the best comfort for your ear). Adjust Twist and adjust the earbud accordingly shown below to make it fitted nicely onto your ear contour. Connect & Ready to Go Turn on the earbud and pair with your device accordingly and set to go. Page 13 of 17

14 Pairing of Earbuds Getting Started Pairing of Earbuds of TWS-X100 TM - Pairing with Phone (Both Earbud synchronize) Press the multi-function button once (Power on) on the left earbud follow by a voice prompt Pairing will be heard. Turn on Bluetooth function in your Smart Phone and find TWS- X100" in you blue-tooth searching list, click it and then you will hear a beep sound follow by prompt" Your Device is Connected. Press the multi-function button once on the right earbud to connect with the left to sync with the left. - L&R Earbud Pairing (Individual) Separately press the multi-function button both left & right once (Power on) follow by press and hold for 3 seconds until you will see the Blue and red led light flashes quickly in turns at the side of the earbud and you will hear voice prompt Pairing on each side. On the Bluetooth function you will see 2 different pairing. TWS- X100" left Earbud and TWS-X100R Right Earbud. You can click on both to pair to your phone at the same time but only 1 side is workable at a time. Page 14 of 17

15 Getting Started Multi-Connection for TWS-X100 TM TWS-X100 cannot connect two phones at the same time on both earbuds. Only when using single earbud can be supported both phone. Multi-Connection: Follow the instructions in the "Pairing" section (individual) to connect the Bluetooth headset to device1. Once connection is successfully established, disable the BIuetooth function on device 1 and turn off the Bluetooth headset. Follow the instructions in the "Pairing" section to connect the Bluetooth headset to device 2. Once connection between device2 and the Bluetooth headset is established, go back to device 1 and turn on BIuetooth function on device 1. The Bluetooth headset should automatically connect to device 1. Or you can simply tap the headset name to connect from your device if it doesn t connect automatically. You have now maintained an active connection with 2 devices at the same time. You can now make/answer phone calls from both devices. Only host earphone left earbuds can make phone calls. When a second phone has in-coming call, need to press the key to hold on the first phone s call, and press it again to pick up the second phone' calling. Page 15 of 17

16 Call Answering Getting Started Call Answering/ Music for TWS-X100 TM When a call coming in, a beep alert sound will be prompt followed by the default musical tone in the earbud. Press once on the Multi-function button to receive a ca II. End a Call Short press once on the Multi-function button to hang up a call. Call Waiting Answering Short press once on the Multi-function button to end the existing call follow by beep alert with default musical tone will prompt for the call answering. Press once again on the multi-function button to answer the call. Reject an incoming call Press and hold the multi-function button for 1 second till a musical sound prompt was heard. Note: During the process of listening to music and a call come through, the music will pause and Music Playing Control Play/Pause: Press the multi-function button to play or Pause Music Page 16 of 17

17 Voice Command Getting Started Voice Command for TWS-X100 TM Voice command control for TWS-X100 is enable for your mobile device. Both IOS and Andriod are applicable to this function. - IOS / Andriod Follow the instructions in the "Pairing" section to connect the Bluetooth headset to device By pressing twice on the multi-connection button, Voice command will be triggered. Note: For Andriod device will require to set up the command accordingly in order to get the command function. Page 17 of 17