OpenScape Business. Tutorial Best Practice SDHC Card handling. Version 1.3

Transcription

1 OpenScape Business Tutorial Best Practice SDHC Card handling Version 1.3

2 About this Document Descriptions within this document refer to OpenScape Business V2R3 effective July 2017 Disclaimer & Copyright The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. Unify, OpenScape, OpenStage and HiPath are registered trademarks of Unify Software and Solutions GmbH & Co. KG. All other company, brand, product and service names are trademarks or registered trademarks of their respective holders. All rights reserved. Copyright Unify Software and Solutions GmbH & Co. KG

3 Table of Contents Overview 5 1. SDHC Card Health Status SDHC Filesystem Information Manufacturing Date and File System Creation Date Filesystem Checks Quick SDHC Check Full SDHC Check with System Restart Health Status Indication 8 2. Recommended Actions Status Red Status Yellow Status Green Status Grey Detailed Descriptions System Backup / Restore Determine the exact SW version at the WBM home page Determine Application Package Software Downloads OpenScape Business System SW image Card Manager SW File Image Cloning Tool - Win32 Disk Imager Image File Re-Sizing Tool - IBEX File Size Changer Prepare New SDHC Card Create new SDHC Card Create SDHC card with Card Manager Tool Create SDHC Card with a Cloning Tool Replacement of SDHC Card Restore System Configuration SDHC Card Cloning Tools Win32 Disk Imager IBEX File Size Changer Backup Informationm Fehler! Textmarke nicht definiert SDHC card Size Fehler! Textmarke nicht definiert OSBiz SDHC Card file System information in general Fehler! Textmarke nicht definiert. 3

4 5.1. Linux vs. MS Windows file system information Fehler! Textmarke nicht definiert CardManager under Linux Fehler! Textmarke nicht definiert GParted under Linux Fehler! Textmarke nicht definiert Mini Tool Partition Wizard under Windows Fehler! Textmarke nicht definiert. 6. Abbreviations 20 Table of History Date Version Changes Initial Creation Enhancements Chapter 2.2. Status Yellow Minor corrections Enhancements Chapter 2.2. Status Yellow 4

5 Overview OpenScape Business systems use SDHC memory cards to store the operating system SW and the system configuration data as well as call data records, UC journals, voic s, traces, etc.. SDHC cards support a limited number of write cycles per memory cell. A built-in memory controller with corresponding firmware ensures that all the memory cells of the card are evenly loaded, and that reserve cells are installed when the memory cells are defective. Despite all the built-in intelligence for optimum use of the memory, the life span of the SDHC card is finite. The SDHC card lifetime in OpenScape Business Systems, depends on system configuration and the use of embedded applications such as UC Smart and Smart Voic . OpenScape Business checks from SW version V2R3, the status of the SDHC card and displays it to the system administrator. Depending on the status, it is recommended to replace the SDHC card. This document describes the necessary steps and preconditions to be observed when changing the SDHC card. The SDHC cards for OpenScape Business have been specially selected and tested for operation on Linux operating systems. The card-specific firmware, the controller and the used memory cells of the SDHC card have been registered with the manufacturer in order to ensure the required operating parameters for all SDHC cards. Other SDHC cards should not be used (even from the same manufacturer) because the operating parameters required for OpenScape Business may not be met and malfunctions may occur in the systems. SDHC cards for OpenScape Business can be ordered under order number L30251-U600-A935. 5

6 1. SDHC Card Health Status SDHC cards offer only very few information to determine its health status. In case that corresponding data are stored on the SDHC card, they can often be read and evaluated only with manufacturer-specific software tools. Standardized information and access mechanisms are not available for this purpose. OpenScape Business evaluates the SDHC card health status on base of the following parameters: Prorated life span of the SDHC card that was determined before by tests in the lab. Read / write errors during operation of the system The currently determined SDHC card health status is displayed at the home page of the OpenScape Business Assistant (WBM). Figure 1 SDHC Health Status at the WBM Home Page Click on the link to branch to the SDHC Health Check page within the WBM and display details on the status. 6

7 Figure 2 SDHC Health Check page within the WBM Expert Mode 1.1. SDHC Filesystem Information On system startup OpenScape Business generates several log files that include information about the SDHC card such as: SDHC card manufacturing date SDHC card vendor File system creation date Last file system check Next file system check Manufacturing Date and Filesystem Creation Date The manufacturing date is written by the card manufacturer and is not changed when the card is partitioned and formatted. The filesystem creation date is written each time when the card is formatted. Therefore the manufacturing date is used to determine the life span of a card. Note: SDHC cards should not be stored too long in stock before they are used in OpenScape Business Filesystem Checks Filesystem errors indicate clearly that a SDHC card is faulty and has to be replaced. Quick SDHC Check OpenScape Business logs permanently SDHC card read / writes errors and uses these information to determine SDHC card health status. At the time, when a system administrator logs into the WBM OpenScape Business checks automatically the log files for filesystem errors. It does not execute an explicate filesystem check at this moment. The SDCH card is determined as faulty under following conditions. Filesystem state is not "clean" Device (mmcblk0) errors found 7

8 EXT3-file system error found Full SDHC Check with System Restart System administrator can trigger an immediate or a scheduled full SDHC card file system check. In this case system restarts and executes the full filesystem check and also the log files check. The full filesystem checks can only be done on unmounted devices therefore a system restart is necessary. The SDHC card is determined as faulty under following conditions. Filesystem state is not "clean" Device (mmcblk0) errors found EXT3-file system error found 1.3. Health Status Indication The SDHC card health status is implemented as a traffic light. Recommended actions are displayed together with the status. Status Recommended action Green No action required Yellow The estimated lifetime of the SDHC card has been reached. Backup your data to an external storage media and perform the SDHC card Health check. In case of no errors, schedule SDHC card replacement. In case of errors replace SDHC card immediately. Red The system has determined SDHC card errors during normal system operation. Backup your data on an external storage and replace SDHC card immediately Grey Card not supported or not possible to retrieve card information. Replace SDHC card by a supported type Table 1 Summary health status indication 8

9 2. Recommended Actions Within the following the required tasks are described step by step. Depending on the SDHC card status, the card has to be replaced by a new one. Before a new card can be inserted the appropriate SW version has to be copied to the SDHC card. For preparation of a new SDHC card following prerequisites are required: Mandatory o PC or Laptop with MS Windows OS, LAN, CD drive, USB interface. o USB SDHC card reader/writer. o Access to the Software Download server (SWS) of Unify o SW uncompressing tool like WinZip or 7Zip o New, suitable SDHC card o Card manager tool on CD o OpenScape Business backup file o OpenScape Business SW image file Optional o SDHC card clone tool o File image re-sizing tool 2.1. Status Red In this case the SDHC card is defect! Do not shut down or restart the system at this stage. Do not perform a full SDHC card file check as a restart might fail. The following main actions have to be done immediately: Tasks Description (in chapter) Determine the exact SW version 3.2 Determine the application package that is active within the system. 3.3 Backup system configuration to an external storage device (PC). 3.1 Retrieve System SW image from Software download server 3.4 Use the Card Manager tool to copy system SW to a new SDHC card 0 Shutdown the system Remove old SDHC card and insert the new one 3.7 Restart the System with new SDHC card. 9

10 Restore system configuration 3.8 Table 2 Recommended Actions for Status Red Note: Do not re-use cards that show file system errors after being in operation since years. Such cards have reached definitely end of life and are not reliable any longer Status Yellow In this case the estimated life span of the SDHC card is exceeded. The card is not defect! No file system errors have been detected. It is recommended to replace the SDHC card by a new one at this status. New SDHC cards can be either created by the Card manager tool or by a SDHC card cloning tool. The efforts using a SDHC card cloning tool are much lower than using the card manager tool. But the cloning tool copies all information 1:1 to the new card. This includes also the log files which are checked for file system error entries as well as the file system creation date. Card cloning may lead to the effect, that the filesystem creation date can be older than the card manufacturing date. The following main actions have to be done if a SDHC card cloning tool is used: Task Description Determine the exact SW version. 3.2 Determine the application package that is active within the system. 3.3 Backup system configuration to an external storage device (PC). 3.1 Shutdown the system Remove old SDHC card Use a SDHC card cloning tool to copy the SDHC card image to a MS Windows PC 0 Option 1 (in case that system outage time has to be kept short) Insert old SDHC card and restart the system Re-size SDHC card image if necessary Write SDHC card image to the new SDHC card Shutdown system 10

11 Replace old SDHC card by the new one Option 2 (in case that system outage time can be longer) Re-size SDHC card image if necessary Write SDHC card image to the new SDHC card Insert the new SDHC card into the system Restart the System with new SDHC card Table 3 Recommended Action for Status Yellow using a cloning tool 2.3. Status Green In this case the estimated lifetime of the SDHC card is not yet reached and no file system errors have been detected. No further actions are required Status Grey The SDHC card vendor cannot be determined or is not known. No estimated life span data are available in this case. The card should be replaced by a Unify certificated SDHC card. The same action as for status red, see chapter 2.1 should be performed. Note: Status Red is also shown for unknown cards in case that read/write errors are detected. 11

12 3. Detailed Descriptions 3.1. System Backup / Restore Make full system configuration backup to external PC using HTTP. Do not store the backup file within the system on SDHC card. The description how to backup and restore system Configuration is described within OpenScape Business Administration Manual Chapter Determine the exact SW version at the WBM home page. The system SW version can be found at the WBM home page. In addition it has also to be determined if a UC Booster Card (OCAB) is operated within the system this is also stated at the home page. It has to be ensured that exactly this SW version is used for SDHC card restoring; otherwise the configuration backup set might not work properly after restoration Determine Application Package The application package can be determined within the WBM Expert Mode under the Application Application selection. This information is essential in case that a UC Booster card or server is present within the system Software Downloads The OpenScape Business system SW and the Card Manager tool SW can be downloaded from the SW Download Server (SWS) of Unify. Access to the SWS requires a valid account for the Unify Partner Portal. The SDHC card cloning tool, the File Image Re-sizing tool and the Linux Filesystem Reader tool have to be downloaded from manufacturer sites within the Internet. Note: The license terms of the SW have to be considered. OpenScape Business System SW image The appropriate SW image for the target system has to be chosen and downloaded from the SWS. Before the SW can be used by the Card Manager tool it has to be uncompressed from tgz to tar file format by using uncompressing tools like WinZip or 7Zip. It is recommended to copy the system SW file into an easy accessible directory of the PC or Laptop in order to facilitate access by the Linux based Card Manager tool. Card Manager SW. The Card Manager tool can be downloaded from the SWS either as a single Java file that is executed on an existing Linux system or as an ISO Image that can be used to create a bootable Linux CD (Knoppix) including the Card Manager. File Image Cloning Tool - Win32 Disk Imager The Win32 Disk Imager SW is under the GNU General Public License version 2.0 (GPLv2) and can be downloaded from the link: 12

13 Image File Re-Sizing Tool - IBEX File Size Changer The IBEX File Size Changer can be downloaded from the link: This software was designed by IBEX UK Ltd, an electronic product design company in South East England, and is released under the free use MIT License. For further information read the full About Me text within the program. Linux Ext3 Filesystem Reader Sometime it is required to read log files directly from the SDHC card. The Freeware Linux Reader for Windows provides read-only access to Linux filesystems under Windows OS. Apart from this the application gives the opportunity to use common Windows Explorer for extracting data. This software is provided by the manufacturer as Freeware and can be download from the link: Prepare New SDHC Card A new SDHC cards for OpenScape Business can be ordered with the feature number L30251-U600-A935. Only these card guarantees the same specification as the original SDHC card. The system SW has to be copied to the SDHC card by using Unify s Card Manager tool. The Card Manager tool as well as the OpenScape Business system SW can be downloaded from Unify s Software Download Server (SWS). It has to be ensured that exactly the previously determined SW version is used. The small SW image is sufficient for SDHC card restauration Create new SDHC Card OpenScape Business SDHC cards cannot be simply copied by Windows or Linux operating system means or by commercial or free partition managers. Some very specific issues have to be considered, which are not supported by most of the tools. Depending on the health status of the SDHC card following tools can be used. Card Manager Tool in case of status red or yellow Card Cloning tool in case of status yellow only Create SDHC Card with Card Manager Tool The Card Manager is used to copy OpenScape Business system SW packages which have been downloaded from the SW Download Server to an SDHC card. The tool can process only system SW package in tar format. The handling of the Card Manager tool is described within the OpenScape Business Administration Manual chapter Note: The Card Manager tools supports only USB based SDHC card readers. Built in card readers of Laptop PC etc. are not supported. Sometimes USB card readers are not recognized by the Card Manager tool as the either the USB controller within the PC or card reader itself is not supported by the Linux driver. In this case try either another USB card reader or another PC HW or the Java file on an actual Linux OS distribution instead of the Knoppix image. Create SDHC Card with a Cloning Tool The cloning of an SDHC card offers following advantages: 13

14 The whole content of the SDHC card is copied 1:1 to the new card No system SW specific image file is required. System configuration need not to be restored. The recommended tool operates under MS Windows OS But there are also some disadvantages to consider: SDHC card cloning can only be used for SDHC cards without file system errors. System log files and the filesystem creation date are also copied 1:1 Depending on the source and destination SDHC card the image file has to be re-sized eventually. The need of image file re-sizing is caused by the fact that SDHC cards provide different number of sectors depending on manufacturer and card type. Even if the cards are labelled with the same capacity. Therefore the capacity of the target card has to be checked before cloning an OSBiz SDHC card Image. Within chapter 4 of this document an example is shown how to clone an OpenScape Business SDHC card using MS Windows based tools. Note: The example is for demonstration purpose only. It comes without guarantee of the functionality within every HW/SW environment and availability of the used tools Replacement of SDHC Card The SDHC card of OpenScape Business must not be removed while the OpenScape Business X system is in operation. The card is mounted as device mmcblk0 within the Linux file system. It must be unmounted from the file system before it can be removed without impacts to the system operation. Following steps are required. Shutdown the OpenScape Business system via WBM Switch off (power off) the system Remove SDHC card and insert the new one. Switch on and start the system by power on Restore System Configuration After a restart with a new SDHC card that has been created by the Card Manager tool the system is in factory default status. Connect administration PC to the Admin LAN port, use the default IP address and default login credentials to login into the Assistant (WBM). Check / Set system date and time. Set the application package according to the previously noted package Restore the system configuration using the previously saved backup file. After backup restart the system. 14

15 4. SDHC Card Cloning Tools 4.1. Win32 Disk Imager The program operates with MS Windows operating system and is designed to write a raw disk image to a removable device or to back up a removable device to a raw image file. The handling of the program is mostly self-explaining. After execution of the setup program the source SDHC card (device) can be chosen and can be copied to the PC (Read). The name of the image file can be entered and the path within the file system can be chosen. The image file is written to the user s download directory if no other path is selected. A progress indicator informs about the copy status. Figure 3 Win32DiskImage -Read SDHC Figure 4 Win32DiskImage Image File Location The image file can be copied afterwards to a new SDHC card. The new SDHC card must have the same or a bigger memory size than the source card. 15

16 Figure 5 Win32DiskImage Write SDHC card After successful writing a success message is displayed, which has to be confirmed. In case that the Image file does not fit to the new SDHC card following message is appears. Figure 6 Win32DiskImage Image File Location In case that the image file does not fit to the new SDHC card as the capacity of the new SDHC card is slightly smaller than the size of the source card, the image can be re-sized by an appropriate tool as long as the OpenScape Business relevant partition (OCSME) itself is not affected. The OCSME partition requires at least 15,349,092 (15,349,091+1) sectors with 512 Bytes memory space. Therefore the minimum image file size is: Bytes kbytes MBytes GBytes 7,858,735,104 7,674,546 7, Table 4 OSBiz SDHC card required memory space IBEX File Size Changer The IBEX File Size Changer tool does the re-sizing job perfectly within MS Windows OS environment. The re-sized image can be written afterwards to the new SDHC card using Win32DiskImager. After installation and start the program prompts with the start screen: 16

17 Figure 7 IBEX file size changer The source file can opened by browsing through the file system after clicking the button Open File. Now the file size in Bytes is shown and the new file size in Bytes can be entered. A check for identical byte content within at the end of file can be chosen before the file is re-sized. This option need to be handled with care as it can mislead the user. The check is not necessarily required as long as the minimum OCSME partition size is not undercut. Note: The program replaces the source image file by the re-sized image file without indication to the user. It is recommended to back up the source file before re-sizing is performed. Re-sizing example: In this example the file SDHCImageTooBig is processed Figure 8 Image File size in MS Windows Explorer Loading the file into the IBEX file size changer displays the file size of 8,068,792,320 bytes. Figure 9 IBEX file size changer Loading Source File 17

18 The new file size should be 7,858,735,104 Bytes. This value is entered into the new file size field. A click to Change The File Size opens the confirmation dialog. Figure 10 IBEX file size changer Confirmation Re-sizing Click to button Ok performs the required action. Figure 11 IBEX file size changer Success Message The new file size can be checked either within the explorer or by loading the file again into the tool. Figure 12 Windows Explorer Check File Size 18

19 Figure 13 IBEX file size changer Check File Size After the image is re-sized it can be written to the source SDHC card using the Win32Image Writer. 19

20 5. Abbreviations SW SDHC EXT3 HTTP WBM OCAB SWS Software Secure Disc High Capacity Linux file system format Hyper Text Transmission Protocol Web Based management (Administrations Portal) UC Booster Card Software Download Server ISO International Standard organization (Image according to ISO 9660) MS HW Microsoft Hardware 20

21 6. Literature Unify Software and Solutions. (02/2017). OpenScape Business V2 Administratior-Dokumentation. Unify. 21

22 Copyright Unify Software and Solutions GmbH & Co. KG 2015 Mies-van-der-Rohe-Str. 6, Munich/Germany All rights reserved. The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. Unify, OpenScape, OpenStage and HiPath are registered trademarks of Unify Software and Solutions GmbH & Co. KG. All other company, brand, product and service names are trademarks or registered trademarks of their respective holders.