Premium Drillpipe. for Optimal Performance
|
|
- Suzan Watkins
- 6 years ago
- Views:
Transcription
1 Premium Drillpipe for Optimal Performance
2 DRILCO offers a full line of premium drillpipe available in a variety of sizes with API and non-standard wall thickness to deliver optimal torque, weight, and durability. Our manufacturing capability ranges from in to in diameter drill pipe in E, X, G, S or SS GRADES in both Range 2 and Range 3 lengths. Special sizes and proprietary grades are available on an individual order basis. Our technical representatives can help you select the best features to ensure maximum BHA performance. 2
3 Premium drillpipe Fatigue in the transition area between the tool joint and the drillpipe is the most common cause of washouts and failures. Therefore, DRILCO uses specialized forging equipment, proprietary tooling, and manufacturing techniques to develop drillpipes with extended upset design and gradual taper, producing a uniform mechanical property throughout the material. The smooth transition between components results in a clean steel and enhanced hardenability. In addition, our proprietary tube chemistries are matched to our quench and temper heat treatment processes to achieve excellent impact values, high fatigue resistance, and extended product life. Optional Features Extended upset double shouldered premium connections Premium hardbanding Internal plastic coating Factory make-up and break-out Extended upset design maximizes drillpipe durability by reducing stress resistance Drillstring durability is maximized by designing pipes that are resistant to fatigue, which is concentrated in areas with sudden changes in geometry. This is the upset area adjacent to the tool joint weld, which serves as the transition from the drillpipe s cross-sectional part to the tool joint s thick cross-sectional part. To increase stress resistance, the upset transition zone between the drillpipe s body and the tool joint needs to be as smooth and gradual as possible. DRILCO selects steel with stringent cleanliness requirements to ensure high fractured toughness that translates into higher safety margins. Using proprietary equipment for the upset areas, we can specify an extended internal upset with a shallow run-out angle that blends seamlessly into the drillpipe s ID. These qualifications improve pipe performance and ensure its durability in this stress-prone region. To further reduce fatigue, we grind both the ID and OD of the assembled pipe adjacent to the weld line. Tool joint forgings are required to meet or exceed API standards. Prior to assembly, each tool joint is inspected to guarantee dimensional properties and test to ensure they provide proper mechanical integrity. Our tool joints are usually supplied 2-in longer than standard API lengths to deliver additional re-cut capability and longer service life. Tool joints with longer lengths can also be supplied by special request. 3
4 PIPE BODY TOOL JOINT ASSEMBLY Nomimal Size, in Premium Makeup, ft.lbf Premium OD, in Displacement (open end), galus/ft Capacity, galus/ft Adjusted Weight, lbm/ft Torsional Ratio Tensile Strengh, lbf Torsional Strength, lbf Makeup Torque, ft.lbf Box Tong Space, in Pin Tong Space, in ID, in OD, in Connection Type Collapse Pressure, psi Burst Pressure, psi Tensile Strength, lbf Torsional Strength, ft.lbf ID, in Wall Thickness, in Upset Grade Nominal Weight, lbm/ft Nominal Size, in G-105 EU , ,082 23,137 23,112 NC ,895 13, , , G-105 EU , ,082 23,137 23, OH ,194 8, , , S-135 EU , ,820 29,747 29,716 NC ,086 17, , , S-135 EU , ,820 29,747 29, OH ,194 8, , , G-105 EU , ,200 19,320 19,758 NC ,221 22, , , S-135 EU , ,825 24,840 25,404 NC ,902 26, , , S-135 EU , ,825 24,840 25,404 NC ,057 20, , , S-135 EU , ,825 24,840 25,404 NC-38 DS ,375 25, , , S-135 EU , ,825 24,840 25,404 NC-38 DS ,505 29, , , S-135 EU , ,825 24,840 25,404 NC-38 DS ,477 25, , , S-135 EU , ,825 24,840 25,404 NC ,858 29, , , G-105 EU , ,890 23,573 23,484 NC ,902 26, , , G-105 EU , ,890 23,573 23,484 NC ,221 22, , , G-105 EU , ,890 23,573 23,484 NC ,057 20, , , G-105 EU , ,890 23,573 23,484 NC ,616 27, , , S-135 EU , ,000 30,308 30,194 NC ,221 22, , , S-135 EU , ,000 30,308 30,194 NC ,057 20, , , S-135 EU , ,000 30,308 30,194 NC ,616 32, , , G-105 IU , ,502 15,159 15,896 NC ,858 30, , , G-105 IU , ,502 15,159 15,896 NC ,616 27, , , G-105 IU , ,502 15,159 15,896 NC-40 DS ,524 32, , , G-105 EU , ,502 15,159 15,896 NC ,937 33, , , S-135 IU , ,646 19,491 20,141 NC ,858 30, , , S-135 IU , ,646 19,491 20,141 NC ,848 29, , , S-135 IU , ,646 19,491 20,141 NC ,616 27, , , S-135 IU , ,646 19,491 20,141 NC-40 DS ,769 36, , , S-135 EU , ,646 19,491 20,141 NC ,399 39,229 1,048, , G-105 IU , ,765 17,456 18,055 NC ,858 30, , , G-105 IU , ,765 17,456 18,055 NC-40 DS ,769 36, , , G-105 EU , ,765 17,456 18,055 NC ,399 39,229 1,048, , S-135 IU , ,413 22,444 23,213 NC-40 DS ,769 36, , , S-135 EU , ,413 22,444 23,213 NC ,399 39,229 1,048, ,
5 PIPE BODY TOOL JOINT ASSEMBLY Nomimal Size, in Premium Makeup, ft.lbf Premium OD, in Displacement (open end), galus/ft Capacity, galus/ft Adjusted Weight, lbm/ft Torsional Ratio Tensile Strengh, lbf Torsional Strength, lbf Makeup Torque, ft.lbf Box Tong Space, in Pin Tong Space, in ID, in OD, in Connection Type Collapse Pressure, psi Burst Pressure, psi Tensile Strength, lbf Torsional Strength, ft.lbf ID, in Wall Thickness, in Upset Grade Nominal Weight, lbm/ft Nominal Size, in X-95 IEU , ,707 12,450 12,765 NC ,399 39,659 1,048, , X-95 EU , ,707 12,450 12,765 NC ,605 37, , , G-105 IEU , ,781 13,761 13,825 NC ,399 39,659 1,048, , G-105 EU , ,781 13,761 13,825 NC ,605 37, , , S-135 IEU , ,004 17,693 16,773 NC ,615 44,871 1,183, , S-135 EU , ,004 17,693 16,773 NC ,674 44,673 1,109, , G-105 IEU , ,833 13,304 12,999 NC ,730 51,447 1,268, , G-105 IEU , ,833 13,304 12,999 NC-50 DS ,926 59,877 1,109, , G-105 IEU , ,833 13,304 12, FH ,742 60,338 1,448, , S-135 IEU , ,070 17,105 15,672 NC ,036 63,406 1,551, , S-135 IEU , ,070 17,105 15,672 NC-50 DS ,010 71,683 1,268, , S-135 IEU , ,070 17,105 15, FH ,328 72,627 1,619, , G-105 IEU , ,201 18,375 18,900 NC ,036 63,406 1,551, , G-105 IEU , ,201 18,375 18,900 NC-50 DS ,010 71,683 1,268, , G-105 IEU , ,201 18,375 18, FH ,328 72,627 1,619, , S-135 IEU , ,259 23,625 24,300 NC-50 DS ,010 71,683 1,268, , S-135 IEU , ,259 23,625 24, FH ,230 76,156 1,778, , G-105 IEU , ,963 12,061 10, FH ,328 72,482 1,619, , S-135 IEU , ,809 15,507 12, FH ,059 87,341 1,925, , S-135 IEU , ,809 15,507 12, FH ,328 72,482 1,619, , S-135 IEU , ,809 15, FH FH DS , ,488 1,619, , G-105 IEU , ,111 13,856 14, FH ,328 72,482 1,619, , S-135 IEU , ,999 17,826 17, FH ,059 87,341 1,925, , S-135 IEU , ,999 17,826 17, FH ,230 76,156 1,778, , S-135 IEU , ,999 17,826 17, FH DS , ,488 1,619, , S-135 IEU , ,035 11,768 6, FH , ,227 2,102, , S-135 IEU , ,556 12,909 7, FH , ,227 2,102, , S-135 IEU , ,556 12,909 7, FH DS , ,838 1,896, , S-135 IEU , ,556 12,909 7, FH DS ,927 93,212 1,448, ,
6 Double-shouldered connections improve torque and hydraulic performance DRILCO offers drillpipe with standard API threaded connections for all available sizes. In addition, we offer DRILCO DS compatible double-shouldered connections, which use a standard API thread form with a secondary internal shoulder. The connection allows you to increase ID or reduce OD, which significantly improves hydraulic and torque performance over conventional API connections. The DRILCO DS connections are compatible with standard API connection thread forms as well as other standard double shouldered connections. Typical double-shouldered connections provide 30% to 40% greater torque capacity than standard API connections. 6
7 Hardbanding minimizes deterioration during drilling and casing rotation Hardbanding material can be welded to the tool joint s circumference to protect it from deterioration during drilling. Some hardbanding types also offer protection for the casing when rotating inside the casing. Whether the application is for standard tungsten carbide or casing friendly using our proprietary DRILCO DEFENDER series hardbanding products, we have the materials available to meet your most stringent requirements. Please be sure to specify your requirements when ordering or discuss your options with our DRILCO representatives. Internal plastic coating prevents corrosion and maximizes durability The internal plastic coating is applied to the inside of the drillpipe to prevent corrosion and extend pipe service life by reducing friction coefficient and improving flow rate and hydraulics. To provide you with high-quality coatings and fast turnaround on orders, we partner with coating service companies that have a proven reputation for timely deliveries based on scheduled workloads. Make and break method minimizes galling and damage to drillpipe connections Factory make-up and break-out of tool joints is a proven method used to minimize galling and damage to new drillpipe connections. The process is performed in the manufacturing plant under controlled conditions to ensure consistency for optimal performance. If galling does occur during the process, the joint is repaired or replaced immediately, saving you rig time and logistical complications. Service after the sale DRILCO is one of the few manufacturing companies that service and support what we sell. Our global infrastructure with strategically located inventory locations and machine shop facilities enable us to support your drilling operations 24 /7. In addition, our fully-equipped service and support facilities offer fast and dependable tubular service that meets your drilling needs such as: inventory control and tubular tracking advanced service and maintenance equipment stringent quality control premium connection repairs Grant Prideco, VAM, and Tenaris licenses available in selection locations 24-h service centers support inclement weather support operations single-source responsibility for inspection, maintenance, repairs, inventory, and storage global network of DRILCO service centers. 7
8 Premium Drillpipe For more information about DRILCO premium drillpipe, visit DRILCO.com. For more than 60 years, DRILCO has provided premium tubular products and services to the drilling industry. DRILCO also offers specialized services such as field inspection, machine shop, field hardbanding, and other tubular management services to provide expert maintenance for essential BHA tools and equipment. Premium Tubular Products DRILCO offers a full line of premium tubulars and tubular products available in a variety of standard sizes to suit your drilling requirements. DRILCO Inspection Services Qualified DRILCO personnel provide a full range of inspection services, which include third-party and customer-defined standards. DRILCO Machine Shop Services For a common tubular connection or a proprietary connection requiring licensing, DRILCO recuts and repairs tubulars, 24 /7. DRILCO Tubular Management Services DRILCO tubular management services provide tubular inventory visibility, storage location management, and centralized maintenance to reduce repair time. DRILCO.com *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2014 Schlumberger. All rights reserved. 14-DT-0037
Setting a Global Standard. Specialty Connectors
Setting a Global Standard www.drilquip.com Specialty Connectors DRILQUIP: A LEADER IN TECHNOLOGY AND QUALITY Recognized worldwide for cuttingedge exploration, drilling and production technology, DrilQuip
More informationINTELLISERV PRODUCT CATALOG
INTELLISERV PRODUCT CATALOG INTELLISERV PRODUCT CATALOG 2 Table of Contents IntelliServ Network General Overview Wired Drill Pipe BHA Components Wired Heavy Weight Drill Pipe Wired Drill Collars Stabilizers
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationSpecialty RELIABLE + VERSATILE
Specialty C o n n e c t o r s RELIABLE + VERSATILE A LEADER IN TECHNOLOGY AND QUALITY Recognized worldwide for cutting-edge exploration, drilling and production technology, Dril- Quip maintains its leadership
More informationPROVEN TOUGH. PROVEN TRUE. PROVEN HDD PARTS. HDD TOOLING CATALOG
PROVEN TOUGH. PROVEN TRUE. PROVEN HDD PARTS. HDD TOOLING CATALOG 2017 THE PARTS YOU NEED. THE SUPPORT YOU DESERVE. We know what it s like on the jobsite. You need to stay on schedule to stay profitable.
More informationThe flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training.
INTRODUCTION TO FLAWSPEC The flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training. Flawspec s corporate strategy and
More informationStandard Releasing Spear. Manual B215
Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type
More informationPlate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
More informationFives: the specialist for Tube & Pipe equipment A leading provider of ERW tube & pipe mills and finishing equipment
A leading provider of ERW tube & pipe mills and finishing equipment March 2014 Who we are A strong company, with the capacity to run projects everywhere The largest range of mill finishing equipment, ERW
More information1. The program has automatic generation of technical reports using customized Word templates as *.dotx-files.
SOFTWARE FOR SIMULATION AND OPTIMIZATION OF METAL FORMING PROCESSES AND PROFILE EXTRUSION QForm VX 8.2.3 new facilities and features October 2017 The new version of QForm has some amazing new features,
More informationDOWNLOAD OR READ : HORIZONTAL DIRECTIONAL DRILLING HDD UTILITY AND PIPELINE APPLICATIONS PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : HORIZONTAL DIRECTIONAL DRILLING HDD UTILITY AND PIPELINE APPLICATIONS PDF EBOOK EPUB MOBI Page 1 Page 2 horizontal directional drilling hdd utility and pipeline applications horizontal
More informationFlareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:
More informationKey Moved to the body of 11 th Edition Moved to a SR of 11 th Edition Removed on 11 th Edition
AI SC5 Ballot Submission Task Group on OCTG Work Item Number 2395 Title of Work Item Type of Distribution [Voting and Comment, Comment-only, Recirculation (comment resolution), Re-ballot] AI Document Modified
More informationCollapse Testing and Modeling of Perforating Guns Carriers. NAPS AUTHORS: Tomas Turkalj, Maurizio Bellingardi, Sebastian Cravero
Collapse Testing and Modeling of Perforating Guns Carriers NAPS-47-18 AUTHORS: Tomas Turkalj, Maurizio Bellingardi, Sebastian Cravero Introduction Gun steel tubular carriers of the Perforating guns have
More informationConnect Electricians' tools, consumables and enclosures
Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories
More informationSTAHLWILLE spanners. STAHLWILLE spanners
STAHLWILLE spanners Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationSpray Nozzle Catalog A guide to spray nozzle selection
Spray Catalog A guide to spray nozzle selection A selection guide to nozzles that will optimize your showering applications. How to Use This Catalog How to identify, specify and order Kadant spray nozzles
More informationHeat Exchanger Condenser Expanders
Heat Exchanger Condenser Expanders The world standard in tube expanders Airetool heat exchanger and condenser expanders have long been recognized as the standard to which all other brands are measured.
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationOCTG Premium Threaded Connection 3D Parametric Finite Element Model. Nabeel Ahsan. Master of Science In Mechanical Engineering
OCTG Premium Threaded Connection 3D Parametric Finite Element Model Nabeel Ahsan Thesis submitted to the faculty of the Virginia Polytechnic Institute and State University in partial fulfillment of the
More informationWebb Core Cleanroom Wall System
Webb Core Cleanroom Wall System PART 1 GENERAL 1.1 WORK INCLUDED A. This Section specifies the requirements necessary to furnish, install and complete a cleanroom wall system (CRW) including, but not limited
More informationTechnical Report Example (1) Chartered (CEng) Membership
Technical Report Example (1) Chartered (CEng) Membership A TECHNICAL REPORT IN SUPPORT OF APPLICATION FOR CHARTERED MEMBERSHIP OF IGEM DESIGN OF 600 (103 BAR) 820MM SELF SEALING REPAIR CLAMP AND VERIFICATION
More informationIntelliServ Product Catalog
IntelliServ Product Catalog DataSwivel* Table of Contents IntelliServ Network General Overview... 3 Wired Drill Pipe... 4 BHA Components Wired Heavy Drill Pipe... 5 Wired Drill Collars... 5 Stabilizers...
More informationSPECIFICATION AND GRADE YIELD EXT % TENSILE Y/T ELONG % (IN ) MIN: MAX: QT - QUENCH & TEMPERED SR - STRESS RELIEVED AR - AS ROLLED
DATE: 08/8/4 UNITED STATES STEEL CORPORATION TUBULAR S TIME: 07:5:58 CERTIFIED REPORT SERIAL NO: L005857 (IN ACCORDANCE WITH ISO 0474/EN004/DIN50049 "type.") MILL ORDER/ITEM NO SHIPPERS NO. P.O. NUMBER
More informationMAX 13,300 RPM. C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1%
WHEEL SPECIFICATIONS ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS Analysis of Typical Wheel Specifications MAX 13,300 RPM www.cgwcamel.com CGW Resin Bond Abrasive Types CGW Coated Abrasive Types A Dark Aluminum
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationTHERMAL MANAGEMENT THE PROMISE THE PROOF HEATEX AIR-TO-AIR HEAT EXCHANGERS
TM THERMAL MANAGEMENT THE PROMISE THE PROOF HEATEX AIR-TO-AIR HEAT EXCHANGERS DYNAMIC AND EVOLVING MARKET FORCES REQUIRE INNOVATIVE SOLUTIONS The pace and growth of modern technology places numerous challenges
More informationThe 5400A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel.
Varec 00A Series The 00A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel. Introduction Varec s have been the industry standard for over
More informationPreparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
More informationSubsea Performance Bolt Workshop
Subsea Performance Bolt Workshop API Spec Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, 9 th Edition API Spec
More informationDrillingsoftware Casing Design User Manual
Drillingsoftware Casing Design User Manual 1. Introduction Working Stress Design (WSD) loads are evaluated throughout the entire length of the casing from the Well Head to the Casing Shoe. True Vertical
More informationCHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION
68 CHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION 4.1 INTRODUCTION There is a demand for the gears with higher load carrying capacity and increased fatigue life. Researchers in the
More informationRHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
More informationSplit Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
More informationWeld Fittings Ultrahigh-Purity and Industrial
www.swagelok.com Catalog Title Weld ittings Ultrahigh-Purity and Industrial / to in. and to mm 3, 3, 3 VR, and 3 VIM/VR stainless steel materials ittings for manual or automatic welding equipment 2 Weld
More informationRiser Integrity Management
SUBSEA EUROPE 2010 CONFERENCE Riser Integrity Management Towards an Integrated Approach Charly GERMAIN 28/10/10 Contents I. Introduction II. Integrity Management: The Technip Way III. Technical Solutions
More informationSpecification. Radiamatic Detectors and Accessories
4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with
More informationDeclaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
More informationAdvancing Sustainment through Public-Private Partnership
Air Force Sustainment Center Advancing Sustainment through Public-Private Partnership Mr. Earl Williams AFSC/LGXB 21 August 2017 Version 1 1 Overview Public-Private Partnerships Public-Private Partnerships
More informationMaintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
Spec-00560 Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 INDUSTRY STANDARDS Maintains NEMA Type 2 and IEC IP55 enclosure rating when properly installed per
More information20MnV6 / E470 Seamless tubes
EXPORT 20MnV6 / E470 Seamless tubes for the machining industry ODS It s no wonder with our wealth of experience, product and market knowledge we play a leading role in the Netherlands as stockholder of
More information1.1. Cable Ties and Fixings Cable Ties Inside Serrated. UB-Series Cable Ties. Commercial Grade Cable Ties
1.1 Cable Ties Inside Serrated UB-Series Cable Ties Commercial Grade Cable Ties Cable ties fit for all purposes manufactured in PA66 material. A range of commercial grade cable ties Available in black
More informationOIL INDIA LIMITED (A Government of India Enterprise) P.O. Duliajan, Pin Dist-Dibrugarh, Assam CORRIGENDUM
OIL INDIA LIMITED (A Government of India Enterprise) P.O. Duliajan, Pin 786602 Dist-Dibrugarh, Assam CORRIGENDUM Addendum No. 1 Dated 30.03.2016 to Tender No. SSG0666L16/01 This Addendum No. 1 dated 30.03.2016
More informationDAIKIN GAS TIGHT JOINT (DGT)
LINE UP Model Name Size (mm) DAIKIN GAS TIGHT JOINT (DGT) SPECIFICATIONS BDGTA06 ø 6.4 BDGTA06 ø 9.5 BDGTA12 ø 12.7 BDGTA15 ø 15.9 BDGTA19 ø 19.1 BDGTA22 ø 22.2 BDGTA28 ø 28.6 DAIKIN GAS TIGHT JOINT Applicable
More informationOE Crosses the Line Into the Aftermarket
OE Crosses the Line Into the Aftermarket This is BCA Over a century of experience Bearing Corporation of America (BCA), founded in Lancaster, Pennsylvania in 1897, has been providing bearing solutions
More informationEnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
More informationRAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES RESOURCE VALUE. (888)
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES The raw material that is used to manufacture your tool is just as important as the design of the tool itself. By using inferior materials, the tool life
More informationStainle ss Ste e l Fit tings
www.swagelok.com Stainle ss Ste e l Fit tings For the Sanitar y Industries Jensen Series Kwik-Clamp, tube butt weld, cme threaded and plain bevel-seat, and specialty end connections 0 and 6L stainless
More informationEfficient Shape Optimisation of an Aircraft Landing Gear Door Locking Mechanism by Coupling Abaqus to GENESIS
Efficient Shape Optimisation of an Aircraft Landing Gear Door Locking Mechanism by Coupling Abaqus to GENESIS Mark Arnold and Martin Gambling Penso Consulting Ltd GRM Consulting Ltd Abstract: The objective
More informationQUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
More informationThe Effect of Element Formulation on the Prediction of Boost Effects in Numerical Tube Bending
The Effect of Element Formulation on the Prediction of Boost Effects in Numerical Tube Bending A. Bardelcik, M.J. Worswick Department of Mechanical Engineering, University of Waterloo, 200 University Ave.W.,
More informationPOWER TOOL ACCESSORIES
Professional SDS Plus Hammer Drills grade high performance SDS plus hammer drill bit range using the latest precision machining and carbide tip technology for increased penetration rates and more efficient
More informationMounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
763.422.2600 Spec-00560 F763.422.22 Mounting Options SYSPEND 28-MAX Suspension System Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 TM INDUSTRY STANDARDS Maintains
More informationDESIGNING FIBER OPTIC DYNAMIC RISER CABLES FOR OFFSHORE APPLICATIONS
DESIGNING FIBER OPTIC DYNAMIC RISER CABLES FOR OFFSHORE APPLICATIONS Jon Steinar Andreassen (Nexans Norway) Email: Nexans Norway AS, P.O Box 645 Etterstad, N-65 Oslo,
More informationA05 Steel Catenary Riser Systems
A05 Steel Catenary Riser Systems Introduction This example contains three examples of steel catenary risers (SCRs). These are: Catenary with Spar Catenary with SemiSub Lazy Wave with FPSO The example also
More informationTMA - WAW-300B Electro-hydraulic Servo-controlled Universal Testing Machine
TMA - WAW-300B Electro-hydraulic Servo-controlled Universal Testing Machine Ⅰ Equipment name: Computer Control Electro-hydraulic Servo Universal Testing Machine Ⅱ Model:TMA - WAW-300B Ⅲ Usages and characteristics:
More informationSEAMLESS HOT ROLLED TUBES
HELÉNS RÖR AB PRUCT RANGE SEAMLESS HOT ROLLED TUBES & HOLLOW BARS Product range SEAMLESS HOT ROLLED TUBES HEAVY WALL TUBES Seamless hot rolled steel tubes for construction, mechanical and general engineering
More informationPipeline engineer competency standards list: onshore sector
Pipeline engineer competency standards list: onshore sector ID Competency area/competency Gen Des Cons Ops Level General engineering GE001 Engineering degree in a relevant discipline x Core GE002 Pipeline
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More informationIndex. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
More informationA Strain Free Lock and Release Mechanism for an Elastically Suspended Two-Axis Gimbal
A Strain Free Lock and Release Mechanism for an Elastically Suspended Two-Axis Gimbal Armond Asadurian Moog Inc., Chatsworth Operations, 21339 Nordhoff Street, Chatsworth, CA 91311 Tel: 001-818-341-5156
More informationOptis Electric Line HD
Optis Electric Line HD Optis Electric Line HD is a step change in downhole video technology providing colour, 25 frames per second video, on mono-conductor cables. Colour images provide a new level of
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (56) 699 054 www.icc es.org ESR 78 Reissued /07 This report is subject to renewal /09. DIVISION: 06 00 00 WOOD, PLASTICS
More informationDUCTILE TEARING ANALYSIS OF A CUSTOM PIPE TO FLANGE NOZZLE USING 3D CRACK MESHES
DUCTILE TEARING ANALYSIS OF A CUSTOM PIPE TO FLANGE Greg Thorwald, Ph.D. Principal Consulting Engineer, Quest Integrity Group, USA Michael Rock Engineering Project Manager, Mighty River Power Limited,
More informationA Multiple Constraint Approach for Finite Element Analysis of Moment Frames with Radius-cut RBS Connections
A Multiple Constraint Approach for Finite Element Analysis of Moment Frames with Radius-cut RBS Connections Dawit Hailu +, Adil Zekaria ++, Samuel Kinde +++ ABSTRACT After the 1994 Northridge earthquake
More informationstudying of the prying action effect in steel connection
studying of the prying action effect in steel connection Saeed Faraji Graduate Student, Department of Civil Engineering, Islamic Azad University, Ahar Branch S-faraji@iau-ahar.ac.ir Paper Reference Number:
More informationR-88 couplings should always be installed so that the coupling bolt pads make metal to metal contact.
R- O-01 MODEL R- RING JOINT COUPLING The Shurjot Model R- Rg Jot Couplg is an ideal pipe jog method when pipe is difficult to groove or when groovg is not the preferred jog method Available sizes to 9
More informationSTRENGTH ANALYSIS OF PIN CONNECTIONS USING COMPUTER AIDED SYSTEMS
STRENGTH ANALYSIS OF PIN CONNECTIONS USING COMPUTER AIDED SYSTEMS PETR BERNARDIN, VACLAVA LASOVA, FRANTISEK SEDLACEK University of West Bohemia in Pilsen RTI Regional Technological Institute Pilsen, Czech
More informationQuality Since 1935 SERIES EXPANSION JOINTS WON T
1-00-25-00 Quality Since 135 SERIES 0EZ EXPANSION JOINTS THEY PERFORM LIKE WON T YOU BELIEVE THE EVOLUTION OF ELASTOMERIC EXPANSION JOINT STYLES Standard Arch (The 130 s) Flowing Arch (The 170 s) Wide
More informationYOUR PARTNER IN THE STEEL INDUSTRY. The best solutions for cutting and grinding applications. Premium grinding tools since
YOUR PARTNER IN THE STEEL INDUSTRY The best solutions for cutting and grinding applications Premium grinding tools since 1919 www.tyrolit.com TYROLIT GROUP 2 TYROLIT Group A global company As one of the
More informationToolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
More informationPRODUCT EXPANSION! New N Geometry in grade IN05S UPDATED
PRODUCT EXPANSION! Bodies: 1.5xD, 3xD, 5xD and 8xD Weldon & Cylindrical Shanks 12xD bodies also available. Refer to NPA NEW-203 Tips: 6.0-25.9 mm Geometries: TPA - Steel TMA - Stainless Steel TKA - Cast
More informationOperating manual LRD 325. Conductivity measuring cell to be installed in pipelines
Operating manual Conductivity measuring cell to be installed in pipelines ba55321de02 10/2010 Copyright Weilheim 2010, WTW GmbH Reprinting - even as excerpts - is only allowed with the explicit written
More informationPressed for time? JUST PRESS, CRIMP AND SAVE.
Pressed for time? JUST PRESS, CRIMP AND SAVE. 10/18 Milwaukee Valve s newly expanded UltraPress line will save you more time than ever. Designed for press-connection systems piping potable water, HVAC
More informationBIKO: Made in Italy, Quality, Style e Customer Care. Biko BENDING ROLLS
SHAPING THE FUTURE For over 20 years BIKO has been synonymous with quality. The BIKO line of bending rolls, introduced 20 years ago, rapidly became the choice for hundreds of manufacturers producing Boilers,
More informationEST Group Pop-A-Plug Tube Plugging System
Optimized Tube Plugging for Air Cooled Heat Exchangers EST Group Pop-A-Plug Tube Plugging System Fast, Safe, Reliable Results: Improved Performance at Significantly Lower Cost provides all the tools for
More informationLiebherr-Aerospace: Optical Metrology from GOM Accelerates Certification Tests for New Landing Gears
Application Note Liebherr-Aerospace: Optical Metrology from GOM Accelerates Certification Tests for New Landing Gears Location/Country: Lindenberg, Deutschland GOM system: ARAMIS GOM software: ARAMIS Professional
More informationRev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
More information(618) FAX (618)
All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars
More informationdia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
More informationCommon grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile. Size Weight (lbs.) Weight (lbs.)
Bar Size Angle Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile Size Weight (lbs.) Weight (lbs.) A B C per Foot per 20' 1/2 x 1/2 x 1/8 0.38 7.6 5/8 x 5/8 x 1/8 0.48 9.6 3/4 x 3/4 x 1/8
More informationERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
More informationSouthwest Windpower Inc. Doc. # Southwest Windpower Inc. 27 Air Tower Analysis 7/7/03
Southwest Windpower Inc. Doc. # 0185 Southwest Windpower Inc. 27 Air Tower Analysis 7/7/03 1. Introduction: The following analysis covers tower stress and anchor loads for the Southwest Wndpower 27' Air
More informationConnect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.
Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling
More informationGlobal to Local Model Interface for Deepwater Top Tension Risers
Global to Local Model Interface for Deepwater Top Tension Risers Mateusz Podskarbi Karan Kakar 2H Offshore Inc, Houston, TX Abstract The water depths from which oil and gas are being produced are reaching
More informationPNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More informationSECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
More information3M Roloc Discs and Disc Sanders. Simply the. Right Angle Solution
3M Roloc Discs and Disc Sanders Simply the Right Angle Solution Choose the Right Right Angle System Having the right tool system for the job is a powerful feeling. You ll feel that power when you combine
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More informationSIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationSFI SPECIFICATION 29.2 EFFECTIVE: FEBRUARY 9, 2006 * PRODUCT: High Horsepower Automatic Transmission Flexplates
SFI SPECIFICATION 29.2 EFFECTIVE: FEBRUARY 9, 2006 * PRODUCT: High Horsepower Automatic Transmission Flexplates 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationD DAVID PUBLISHING. Stability Analysis of Tubular Steel Shores. 1. Introduction
Journal of Civil Engineering and Architecture 1 (216) 563-567 doi: 1.17265/1934-7359/216.5.5 D DAVID PUBLISHING Fábio André Frutuoso Lopes, Fernando Artur Nogueira Silva, Romilde Almeida de Oliveira and
More informationFatigue design of welded bicycle frames using a multiaxial criterion
Available online at www.sciencedirect.com Procedia Engineering 34 (2012 ) 640 645 9 th Conference of the International Sports Engineering Association (ISEA) Fatigue design of welded bicycle frames using
More information3D Finite Element Software for Cracks. Version 3.2. Benchmarks and Validation
3D Finite Element Software for Cracks Version 3.2 Benchmarks and Validation October 217 1965 57 th Court North, Suite 1 Boulder, CO 831 Main: (33) 415-1475 www.questintegrity.com http://www.questintegrity.com/software-products/feacrack
More informationSuperior Engineering Proven Performance Excellent Finish Less Fatigue
FEATURING Taping & Finishing Tools Built Superior Engineering Proven Performance Excellent Finish Less Fatigue Intex Automatic Flat Boxes Intex Automatic Flat Finisher Boxes - Smooth Operation The exclusive
More information