MODERN DIGITAL CLOCK HIDDEN CAMERA SKU: MiniClockDeluxe

Transcription

1 MODERN DIGITAL CLOCK HIDDEN CAMERA SKU: MiniClockDeluxe THANK YOU FOR PURCHASING THE MODERN DIGITAL CLOCK HIDDEN CAMERA Please read this manual before operating the modern digital clock hidden camera and keep it handy. Our line of mini clock cams is one of our bestselling products. These functional clocks with hidden cameras are a great option for covert recording. The sleek design with blue LED display will fit in anywhere. The display cycles through time, date, and temperature. This camera can record 1280*960 resolution color video with a 72 viewing angle, which can be stored on a MicroSD card 2GB 2GB in size. The battery lasts up to 12 hours on one charge. Use the remote control to choose between taking photo, recording continuous video, or using motion detection. Your purchase should include: 1 x Modern Digital Clock Hidden Camera 1 x Remote Control 1 x USB Cable 1 x AC Charger with Cable 1 x Instruction Booklet

2 GET FAMILIAR WITH YOUR MODERN DIGITAL CLOCK HIDDEM CAMERA Talk Button Clock Function Buttons LED Display Camera Lens USB Port Power Switch Indicator Light Charging Light SD Card Slot Figure 1: Front View Figure 2: Back View

3 OPERATING THE MODERN DIGITAL CLOCK HIDDEN CAMERA IMPORTANT NOTICE: Allow the device to charge 4 6 hours before using. HOW TO CHARGE THE MODERN DIGITAL CLOCK Using the AC Adapter 1. Push the switch to OFF 2. Plug the AC adapter with cable into a wall outlet. Plug the cable into the clock The red charging light will be on while the device is charging Using the USB Cable 1. Push the switch to OFF 2. Plug the USB cable into your PC. Plug the USB cable into the clock The red charging light will be on while the device is charging The red charging light will turn off when fully charged HOW TO SET THE TIME AND DATE The time, date, and temperature will all be displayed on the front LED display. The first time you plug in the mini clock travel, the LED display will count upward 0 9. The LED display will rotate between time, date, and temperature. The temperature default is Celsius and the time default is Military. Five buttons that you need for setting up the mini clock travel are located on the back of the device (see Figure 2): TIME DOWN UP SET MODE Set the Year 1. Push the SET button on the back of the device should be blinking on the LED display. 2. Push the UP button on the back of the device until the LED display reads the current year. Set the Month and Day 1. Push the SET button again. There should be a 1 blinking on the left side of the LED display. This is the month. 2. Push the UP or DOWN button until the number on the left side reads the current month.. Push the SET button again. There should be a 1 blinking on the right side of the LED display. This is the day. 4. Push the UP or DOWN button until the number on the right side reads the current day. Set the Time 1. Push the SET button again. The hour should be blinking. 2. Push the UP or DOWN button until the LED display reads the current hour.. Push the SET button again. The minutes should be blinking. 4. Push the UP or DOWN button until the LED display reads the current minute. Switch from Military to Civilian Time 1. Push the TIME button on the back of the device. 2. Push the UP button to switch between military (24:00) and civilian (12:00). Switch from Celsius to Fahrenheit 1. Push the TIME button on the back of the device. 2. Push the DOWN button to switch between degrees Celsius and degrees Fahrenheit.

4 Set the Alarm 1. Push the MODE button on the back of the device. The LED display should read like the following: 2. Push the SET button on the back of the device. The hour should be blinking.. Push the UP or DOWN button to set the hour for which you want the alarm to sound. 4. Push the SET button again. The minutes should be blinking. 5. Push the UP or DOWN button to set the minute for which you want the alarm to sound. 6. Push the SET button again. The LED display should read with a 01. This is the snooze. Snooze can last from 1 60 minutes. 7. Push the UP or DOWN button to set the snooze time. 8. Push the SET button again. The LED display should read with a 1. This is the alarm ring. There are 6 rings from which to choose Rings 1 5 are nature sounds Ring 6 is a repetitive buzz. Push the MODE button on the back of the device to exit the alarm. NOTICE: You have only set the alarm with these steps Turn On the Alarm 1. Push the MODE button on the back of the device. 2. Push the UP button on the back of the device. If the LED screen reads - - : - - then the alarm is off If the LED screen reads the time for which you set the alarm, the alarm is on. Push the MODE button to exit the alarm. 4. To stop the alarm after it sounds, press the button on top of the device. HOW TO RESET THE TIME AND DATE STAMP (Windows Only) 1. Connect the device to your PC using the USB Cable 2. Go to Click on "WriteTime.exe" 4. Click on "camstickma.exe" IMPORTANT NOTICE: You might receive a warning that this program contains a virus. Disregard this warning. The program is safe to use. 5. Go to Start > Computer > Downloads > Open WriteTime.exe 6. Click "Run" 7. The program will automatically detect the device. 8. Click "Update"

5 PREPARING THE DEVICE FOR USE 1. Be sure the Power Switch is switched from OFF to ON. 2. Insert a MicroSD card into the slot located to the left of the Power Switch.. Make sure your clock has been fully charged. 4. Place the device where you want to record. USING THE REMOTE Power Button Motion Detection Button HOW TO TURN ON THE CAMERA 1. Push the Power Button on the remote The blue indicator light will come on HOW TO RECORD VIDEO 1. Push the Video Button on the remote The blue indicator light will flash times and then turn off The device is now recording HOW TO TAKE PHOTOS 1. Push the Camera Button HOW TO USE MOTION DETECTION 1. Press the Motion Detection Button The blue indicator light will flash quickly Video Button Camera Button

6 RETRIEVE THE FILES TO YOUR PC 1. Plug the device into your PC using the USB cable. 2. Locate Removable Disk inside the (My) Computer folder. AutoPlay Removable Disk > Open folder to view files Or Go to Start > Computer > Removable Disk. Open the Removable Disk drive. 4. Open the DCIM folder. 5. Double click the file you want to view. VLC Player is recommended for watching videos.

7 TROUBLESHOOTING SPECIFICATIONS THE DEVICE WON T TURN ON Charge the device for at least 4 hours before the first use. Make sure the charging cable is securely inserted into the device and into the power source. THE DEVICE ISN T CHARGING Replace the battery or charging cable. If you are charging via a wall power source, you may need to charge via your PC. The A/C adapter might be bad. THE DEVICE HAS CRASHED You need to reset the device. MY COMPUTER DOESN T RECOGNIZE THE DEVICE Unplug the device from your PC and reboot the device. Unplug the device from your PC and reboot your PC. Try using a different USB slot on your PC. Replace the USB cable. THE SOUND OR VIDEO IS UNCLEAR The device needs charging. OTHER PROBLEMS Call our technical support at Pixels 5 Mega Video Resolution 1280*960 Video Format AVI Frames per Second 0 Recording Time 12 hours Vision Angle 72 Motion Detection Yes Lux Rating 1Lux Water Resistant No Battery Life 12 hours Type of Memory MicroSD Card Memory Capacity 2GB 2GB Recording Capacity 2GB 1 hour 4GB 2 hours 8GB 4 hours 16GB 8 hours 2GB 16 hours USB Interface 2.0 USB Player Software VLC recommended Operating Systems Windows 2000 Windows Me Windows XP Windows Vista Windows 7 Mac OSX Linux