3RP, 7PV Timing Relays

Transcription

1 3RP, PV Timing Relays Overview Standards The timing relays comply with: EN "Environmental conditions" EN /DIN VDE 0435 Part 2021 "Solid-state relays, timing relays" EN and EN "Electromagnetic compatibility" EN ; (VDE 0660 Part 200) "Low-voltage controlgear, switchgear and systems Electromechanical controlgear" 3RP15 timing relays, width Application Timing relays are used in control, starting, and protective circuits for all switching operations involving time delays. They guarantee a high level of functionality and a high repeat accuracy of timer settings. Enclosure design All timing relays are suitable for snap-on mounting onto 35 mm standard mounting rails according to EN or for screw fixing. LED for indicating "Time relay on voltage" LED for indicating "Relay switched" range selector switch Function switch Decive labeling plate NSB0_01423 Operating time adjustment Inspection window for set time range Inspection window for set function Accessories Push-in lugs for screw mounting Sealable cap Label set for marking the multifunction relay /28 Siemens LV

2 Selection and ordering data mechanical engineering with: 1 changeover or 2 changeover s Rated control supply voltage U s DT Screw-type connection PU V V kg 3RP15 05 timing relays, multifunction, 15 time setting ranges The functions can be adjusted by means of rotary switches. Indicator labels can be used to adjust different functions of the 3RP15 05 timing relay clearly and unmistakably. The corresponding labels can be ordered as an accessory. The same potential must be applied to terminals A. and B. 1) 1 CO, s 8 functions 2 CO s, 16 functions 3RP B... 2 CO s, positively driven and hard goldplated. 8 functions 4)5) 3RP15 1. timing relays, ON-delay, 1 time setting range 1 CO A 3RP AA unit / } 3RP AQ unit / } 3RP AP unit ) ) } 3RP AW unit / } 3RP BQ unit / } 3RP BP unit ) ) } 3RP BW unit A 3RP BT unit } 3RP RW unit / } 3RP AQ unit / } 3RP AP unit / } 3RP AQ unit / } 3RP AP unit / } 3RP AQ unit / } 3RP AP unit RP A... 3RP15 25 timing relays, ON-delay, 15 time setting ranges 3RP A... 1 CO s 2 CO s / / 3RP15 2 timing relays, ON-delay, two-wire design, 4 time setting ranges 1 NO (semiconductor) s s s 24/ } 3RP AQ unit / } 3RP AP unit ) A 3RP BR unit / } 3RP BQ unit / ) 24 } 3RP BP unit ) } 3RP BW unit ) A 3RP15 2-1EC unit ) } 3RP15 2-1EM unit RP15 2-1E... 1) For functions, see 3RP label set. 2) With switch position Š, no timing. For test purposes (ON/OFF function) on site. Relay is constantly on when activated, or relay remains constantly off when activated. Depending on which function is set. 3) Operating range 0. to 1.1 x U s. 4) Positively driven: NO and NC are never closed simultaneously; gap >= 0.5 mm is ensured, minimum make-break capacity 12 V, 3 ma. 5) The changeover s are actuated simultaneously, as a result of which only 8 functions are selectable (no wye-delta, no instantaneous ). 6) Operating range 0.8 to 1.1 x U s. Siemens LV /29

3 mechanical engineering with: 1 changeover or 2 changeover s Rated control supply voltage U s DT Spring-loaded terminal PU V V kg 3RP15 05 timing relays, multifunction, 15 time setting ranges The functions can be adjusted by means of rotary switches. Indicator labels can be used to adjust different functions of the 3RP15 05 timing relay clearly and unmistakably. The corresponding labels can be ordered as an accessory. The same potential must be applied to terminals A. and B. 1) 1 CO, s 8 functions 2 CO s, 16 functions 2 CO s, positively driven and hard goldplated. 8 functions 4)5) 3RP15 1. timing relays, ON-delay, 1 time setting range 1 CO 24/ C 3RP AQ unit / A 3RP AP unit ) ) A 3RP AW unit / A 3RP BQ unit / A 3RP BP unit ) ) A 3RP BW unit A 3RP RW unit / C 3RP AQ unit / A 3RP AP unit / C 3RP AQ unit / A 3RP AP unit / C 3RP AQ30 1 unit / C 3RP AP unit RP15 25 timing relays, ON-delay, 15 time setting ranges 1 CO s 24/ C 3RP AQ unit / A 3RP AP unit CO s 24/ C 3RP BQ unit / A 3RP BP unit ) ) A 3RP BW unit RP15 2 timing relays, ON-delay, two-wire design, 4 time setting ranges 1 NO s ) C 3RP15 2-2EC unit (semiconductor) s ) C 3RP15 2-2EM unit s 1) For functions, see 3RP label set. 2) With switch position Š, no timing. For test purposes (ON/OFF function) on site. Relay is constantly on when activated, or relay remains constantly off when activated. Depending on which function is set. 3) Operating range 0. to 1.1 x U s. 4) Positively driven: NO and NC are never closed simultaneously; gap >= 0.5 mm is ensured, minimum make-break capacity 12 V, 3 ma. 5) The changeover s are actuated simultaneously, as a result of which only 8 functions are selectable (no wye-delta, no instantaneous ). 6) Operating range 0.8 to 1.1 x U s. /30 Siemens LV

4 mechanical engineering with: 1 changeover or 2 changeover s Rated control supply voltage U s DT Screw-type connection PU V V kg 3RP15 3. timing relays, OFF-delay, with auxiliary voltage, 1 time setting range 1 CO The same potential must be applied to terminals A and B. 24/ A 3RP AQ unit / } 3RP AP unit / A 3RP AQ unit / } 3RP AP unit / A 3RP AQ unit / } 3RP AP unit RP A... 3RP15 40 timing relays, OFF-delay, without auxiliary voltage, time setting ranges 1) 1 CO s s s ) } 3RP AB unit ) } 3RP AJ unit ) } 3RP AN unit CO s ) } 3RP BB unit ) A 3RP BJ unit ) } 3RP BN unit RP A... 3RP15 55 timing relays, clock-pulse relay, 15 time setting ranges s / / 1 CO 60 5) A 3RP AR unit / } 3RP AQ unit / } 3RP AP unit RP A... Š 4) 3RP15 60 timing relays, wye-delta function, dead interval 50 ms and overtravel time, 1 time setting range 3 NO s 3) (common root terminal 1) wye-delta s, overtravel time (idling) s 24/ A 3RP SQ unit / } 3RP SP unit RP S... 3RP15. timing relays, wye-delta function 6), dead interval 50 ms, 1 time setting range 1 NO s 24/ } 3RP15 4-1NQ unit instantaneous and 24/ } 3RP15 4-1NP unit NO / -- B 3RP15 4-1NM unit delayed (common s 24/ } 3RP15 6-1NQ unit root terminal 1) 24/ } 3RP15 6-1NP unit / -- B 3RP15 6-1NM unit RP15.-1N... 1) Setting of output s in as-supplied state not defined (bistable relay). Application of the control voltage once results in changeover to the correct setting. 2) Operating range 0. to 1.25 x U s. 3) Operating range 0.85 to 1.1 x U s. 4) With switch position Š, no timing. For test purposes (ON/OFF function) on site. For dead time "infinite", the relay is always off. For pulse time "infinite", the relay is always on. 5) Operating range 0.8 to 1.1 x U s. 6) For typical circuit see Schematics. Siemens LV /31

5 mechanical engineering with 1 changeover or 2 changeover s Rated control supply voltage U s DT Spring-loaded terminal PU V V 1) Setting of output s in as-supplied state not defined (bistable relay). Application of the control voltage once results in changeover to the correct setting. 2) Operating range 0. to 1.25 x U s. 3) Operating range 0.85 to 1.1 x U s. 4) With switch position Š, no timing. For test purposes (ON/OFF function) on site. For dead time "infinite", the relay is always off. For pulse time "infinite", the relay is always on. 5) Operating range 0.8 to 1.1 x U s. 6) For typical circuit see Schematics. per unit/ set/ meter 3RP15 3. timing relays, OFF-delay, with auxiliary voltage, 1 time setting range 24/ C 3RP AQ unit CO 24/ A 3RP AP unit The same 24/ C 3RP AQ unit potential must 24/ C 3RP AP unit be applied to terminals A and 24/ C 3RP AQ unit B 24/ C 3RP AP unit RP15 40 timing relays, OFF-delay, without auxiliary voltage, time setting ranges 1) 1 CO s s s ) A 3RP AB unit ) A 3RP AJ unit ) A 3RP AN unit CO s ) A 3RP BB unit ) C 3RP BJ unit ) C 3RP BN unit RP15 55 timing relays, clock-pulse relay, 15 time setting ranges s / /60 5) C 3RP AR unit changeover 24/ C 3RP AQ unit Š 4) 24/ A 3RP AP unit RP15 60 timing relays, wye-delta function, dead interval 50 ms and overtravel time, 1 time setting range wye-delta s, overtravel time (idling) s 3RP15. timing relays, wye-delta function 6), dead interval 50 ms, 3 NO s 3) (common root terminal 1) 1 time setting range 1 NO instantaneous and 1 NO delayed (common root terminal 1) 24/ C 3RP SP unit s 24/ A 3RP15 4-2NP unit / B 3RP15 4-2NM unit s 24/ C 3RP15 6-2NQ unit / A 3RP15 6-2NP unit / B 3RP15 6-2NM unit kg /32 Siemens LV

6 Accessories Label sets Function Code letter Application Accessory for 3RP (not included in the scope of supply). The label set offers the possibility of labeling timing relays with the set function in English and German. With ON-delay A for B 1 label set OFF-delay with auxiliary voltage (1 unit) with 8 ON-delay and OFF-delay with functions auxiliary voltage Flashing, starting with interval Passing make Passing break with auxiliary voltage Pulse-forming with auxiliary voltage G Additive ON-delay with auxiliary voltage With ON-delay A for B 1 label set OFF-delay with auxiliary voltage (1 unit) with 16 ON-delay and OFF-delay with functions auxiliary voltage Flashing, starting with interval Passing make Passing break with auxiliary voltage Pulse-forming with auxiliary voltage G Additive ON-delay with auxiliary voltage and instantaneous ON-delay and instantaneous OFF-delay with auxiliary voltage and instantaneous ON-delay and OFF-delay with auxiliary voltage and instantaneous Flashing, starting with interval, and instantaneous Passing make and instantaneous Passing break with auxiliary voltage and instantaneous Pulse-forming with auxiliary voltage and instantaneous C D E F H C D E F H A B C D E F G with 1 CO and 3RP RW30 with 2 CO s DT Order No. Price PU kg } 3RP A 1 5 units } 3RP B 1 5 units Wye-delta function *D Blank labeling plates Blank labeling plates, mm x mm, pastel turquoise 1) C 3RT SB units Covering caps and push-in lugs Push-in lugs for screw mounting for with 1 or 2 CO s } 3RP units Sealable caps for securing against unauthorized adjustment of setting knobs for with 1 or 2 CO s } 3RP units ) Computer labeling system for individual labeling of device labeling plates available from: murrplastik Systemtechnik GmbH. Siemens LV /33