Kodak EasyShare digital photo frame Extended user guide P520/P720/P820

Transcription

1 Kodak EasyShare digital photo frame Extended user guide P520/P720/P820 For help with your frame,

2 Eastman Kodak Company Rochester, New York Eastman Kodak Company, 2008 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. P/N 4F8178_en

3 Product features Front View Kodak EasyShare P520 digital frame 1 LCD screen 2 Quick Touch Border (right side, tap only) 3 Quick Touch Border (bottom, tap/slide) To use the Quick Touch Borders, see page Kodak EasyShare P720/P820 digital frames i

4 Back/Side View P520/P720 digital frames P820 digital frame 9 1 On/Off button 5 Reset button 2 Stand attachment slot 6 Wall mounting holes, 3 (see page 7) 3 Frame stand (see page 1) 7 USB connector (to camera/usb device) 4 Memory card slot - SD, MS, xd, MMC 8 Memory card slot - SD/SDHC 9 Power connector ii

5 Table of contents 1 1 Getting started...1 Setting up your frame...1 Turning your frame on and off...2 Using your frame s Quick Touch Borders...3 Setting your language...4 Enjoying your pictures immediately!...4 Inserting a memory card...5 Connecting a digital camera or other USB device...6 Changing your frame orientation...7 Mounting your frame on the wall Viewing pictures...8 Accessing your pictures...8 Running a slide show...9 Viewing thumbnails...9 Viewing a single picture...10 Viewing pictures by date or filename...10 Copying pictures...11 Deleting pictures...11 Selecting multiple pictures...12 Copying from your computer Doing more...16 P520 Changing frame and slide show settings...16 P720/P820 Changing frame and slide show settings...18 Setting the clock and timer...21 Upgrading your firmware...22 Installing the software...23 Customizing your frame...24 Maintaining your frame, faceplates, and mattes iii

6 Table of contents Learning more about your frame Troubleshooting and support...26 Picture frame problems...26 Screen messages Appendix...30 Digital frame specifications...30 Important safety instructions...31 Upgrading your software and firmware...31 Additional care and maintenance...31 Limited warranty...32 FCC compliance and advisory...34 iv

7 1 Getting started Welcome to your Kodak EasyShare digital frame. Viewing your pictures couldn t be simpler! Setting up your frame Attaching the frame stand Tab Slot Make sure the tab is secure in the slot. Your frame displays pictures in landscape orientation, see page 7. orientation. To change to portrait 1

8 Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. 1 2 Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. Turning your frame on and off Turn on. Turn off (put in standby mode). Press and hold the power button (for about 2 seconds), then release. Power off Unplug the power cable. 2

9 Using your frame s Quick Touch Borders Getting started Touch tips Tap and slide on the Quick Touch Borders* only. Tap a border to display the icons. Tap (Close) to dismiss them. Tap next to or below a button to select it. Slide to highlight menus, pictures, videos, options.** Tap OK to select them. Don t hover, borders can be sensitive; unexpected selections may result. Tap below buttons Slide on bottom border only Tap next to buttons, cannot slide here Home Play Slide show Close OK Done *Quick Touch Borders Slide to scroll: Scroll through images Like turning the pages of a book, slide left to go forward, slide right to go back. For faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border. Scroll through menus Slide right to scroll down, slide left to scroll up. ** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time. IMPORTANT: The screen is not touch-sensitive. Do not touch it. Only use your finger to touch the borders. Sharp or metal objects may damage the border or screen. 3

10 Getting started Setting your language The language screen appears the first time you turn on your frame. Slide or tap below slider arrows to find your language, then tap OK. To change the language at a later time: 2 Tap (Home) (Settings) Language. The language screen appears. Slide to find your language, then tap Save. 1 Enjoying your pictures immediately! NOTE: If the software installation screen appears, dismiss it and start playing a slide show immediately. To install the software later, see page 23. To view your pictures or play a slide show, insert a memory card, or connect a camera or other USB device (see page 6). If you are at the Home screen, see page 8 to start your slide show. NOTE: There may be preloaded Kodak images on your frame. They will play when there is no other picture source connected. 4

11 Getting started Inserting a memory card MultiMedia Card SD/SDHC Memory Stick xd SD/SDHC P520/P720 digital frame P820 digital frame To insert a card in: top card slot, push the card firmly into the slot until it clicks into place. side card slot, push the card firmly into the slot until it stops. To remove a card from: top card slot, push in the card to release it. side card slot, pull out the card. IMPORTANT: Do not insert a micro or mini memory card without an adapter. 5

12 Getting started Connecting a digital camera or other USB device USB devices: camera, flash drive, card reader, etc. (sold separately) P520/P720 digital frame USB cable included with your USB device P820 digital frame 6

13 Changing your frame orientation Getting started Your frame is set up to display pictures in landscape orientation. You can turn the stand to change it to portrait but you must also change the setting. Change the stand position: Remove the stand, turn it 90, and replace as shown (see page 1). Change the setting: 1 Tap (Home) (Settings). 2 Slide to highlight (Viewing options), then tap OK. 3 Slide to highlight Frame orientation, then tap OK. 4 Slide to highlight Portrait, then tap OK. 5 Tap to exit. Mounting your frame on the wall Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your frame securely to your wall. Secure power cable with attached clip Wall mounting holes (on back of frame) To change to portrait, turn your frame 90 and use the wall mounting holes at the top. 7

14 2 Viewing pictures Accessing your pictures Tap Home to access pictures from your memory card and all connected devices (see page 6). Use the touch borders to make your selections (see page 3). 1 Tap (Home). All connected sources and the Settings icon are displayed. 2 Slide to highlight a picture source, then: Tap (Slide show) to start a slide show. OR Tap OK to view thumbnails. Picture sources and settings icons: Memory card appears when you insert a card (page 5). The label and icon indicate the type of card. Camera appears when you connect a digital camera via USB cable (page 6). USB drive appears when you insert a USB flash drive (page 6). Settings customize your frame settings. For example; set slide show durations and transitions, set viewing options, screen brightness, clock, and timer. For P520 frame settings, see page 16. For P720 and P820 frame settings, see page

15 Running a slide show There are three ways to start a slide show on your frame: Insert a memory card or USB device, then turn on your frame. Viewing pictures Turn on the frame, then insert a card or connect a USB device a new slide show starts automatically, replacing a currently running slide show or single view picture. Select a picture in thumbnails view or select a picture source on the Home screen, then tap (Slide show). Select just your favorite pictures from a picture source (see Selecting multiple pictures, page 12), then tap (Slide show). Other slide show information A slide show plays continuously until you stop it or turn off the frame. You can change the slide show duration and transition style (see page 16). Viewing thumbnails There are two ways to view your pictures as thumbnails: Tap (Home) then select a picture source (see page 8). Tap OK. Or, From a slide show (tap a quick touch border to display the icons), or from single view, tap (Thumbnails). To navigate through the thumbnails, slide your finger left/right along the slider at the bottom. To move even faster through the thumbnails, touch and hold until the screen changes (about 3 seconds). To play a folder of thumbnail images, highlight the folder then tap (Slide show). 9

16 Viewing pictures Viewing a single picture To view a single, full-screen picture, highlight it in thumbnails view, then tap OK. To turn off the buttons and other screen text, tap (Close). To magnify a picture up to 8X, tap (Actions), tap (Zoom), then tap the plus (+) button. To view other parts of the picture, tap the arrows. To return to 1X size, tap the minus (-) button. NOTE: Depending on picture size, full magnification may be less than 8X. To rotate a picture, tap (Actions), then tap (Rotate). Viewing pictures by date or filename By default, the pictures on your frame are arranged and played by date, starting with the oldest. You can change the arrangement, or sort order, by date or alphabetically by filename. NOTE: If a picture source with numerous images (greater than 500) takes too long to load, change the order to play by filename. To change the sort order: 1 For P720 or P820 frames display thumbnails (see page 9), then tap (Slide show options). For P520 frame tap (Home) then (Settings). 2 Highlight Sort, then tap Select. 3 Select a sort order: -Filename, A - Z -Filename, Z - A -Date, oldest to newest (default) 10

17 Viewing pictures -Date, newest to oldest 4 Tap Save. Copying pictures Copy pictures from your current viewing location to another connected device. For example, insert a USB flash drive (see page 6) and insert a card (see page 5) in your frame, then copy pictures from the flash drive to the card. To copy pictures from your computer, see page 13. CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Highlight a picture to copy: In thumbnails view, slide, or tap below the slider arrows, to find a picture; or, display a picture in single view (see page 10). To select multiple pictures, see page Tap (Actions). 3 Tap (Copy). 4 Tap the device you want to copy to, then tap OK. The picture is copied. Connected devices 5 Tap (Close) to close the menu. Deleting pictures CAUTION: Removing a card or disconnecting a device while deleting may 11

18 Viewing pictures damage your card, pictures, or device. Tap Delete 1 Highlight a picture to delete: In thumbnails view, slide or tap below the slider arrows to find a picture; or, display a picture in single view (see page 10). To select multiple pictures, see page Tap (Actions). Selecting multiple pictures 3 Tap (Delete), then tap Yes to confirm. The picture is deleted. 4 Tap (Close) to close the menu. Use the multi-select feature to copy or delete two or more pictures or to play a slide show of selected pictures. 1 In multi-up (thumbnails) view, slide your finger along the bottom touch border to find a picture, then tap (Select). A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, highlight a picture then tap Unselect. Tip: To remove all check marks at once, tap Select All, then tap Unselect All. Select/Unselect all In thumbnails view (page 9), tap (Select All). To remove all check marks, tap Unselect All. 12

19 Copying from your computer Viewing pictures Use Kodak EasyShare digital display software to drag and drop pictures easily from your computer to a removable device (memory card or other USB device, like a flash drive or camera). Then insert the device into your frame and play a slide show right away. 1 Install the software that came with your frame (see page 23). 2 Insert a removable device into your computer or connected card reader. 3 Double-click (Kodak EasyShare digital display icon) on your desktop to open the software. The memory card and connected devices appear in the Drag and Drop Zone. Click Help for more info Select pictures here (Viewer pane) Drag and drop here (Drag and Drop Zone) Pictures and Videos: Pictures on your computer My Devices: USB device Memory card 4 Click My Devices to see the connected devices and their folders. 5 In Pictures and Videos, click the folder or location on your computer that contains the pictures you want to copy. 13

20 Viewing pictures 6 In the Viewer pane, select the pictures you want to copy, then drag and drop them to the copy location (memory card or USB device) in the Drag and Drop Zone. The pictures are copied to the memory card or USB device. 7 Remove the card or USB device from your computer. Insert the card into your frame s card slot (see page 5), or connect the USB device (see page 6). A slide show begins. NOTE: To maintain the slide show order during playback, see page 10 and select Filename, A to Z. For more information on the features included in the Kodak EasyShare digital display software, click the Help button. Copying pictures from EasyShare software It s easy to copy pictures from My Collection to a memory card, then play them in a slide show on your frame. 1 Install the software that came with your frame (see page 23). 2 Insert a memory card into your computer. Or insert a removable USB device or card reader into the computer s USB port. 3 Double-click (Kodak EasyShare software icon) to open the software. My Collection Select pictures here (Viewer pane) Drag and drop here (Picture tray) 14

21 Viewing pictures 4 Click My Collection, then select the pictures in the Viewer pane. Drag and drop them into the Picture tray. 5 In the menu bar, select File Copy to. 6 Browse to the location to which you are copying. The memory card, card reader, and USB device appear as removable drives. 7 Select Best For Picture Frame to resize the pictures you are copying. Full resolution is unnecessary and quickly fills up the frame s memory. 8 Click Copy. Pictures are copied to the copy destination (memory card or USB device). 9 Remove the card or USB device from your computer. Insert the card into your frame s card slot (see page 5), or connect the USB device (see page 6). A slide show begins. For more information on the features included in the Kodak EasyShare software, click the Help button. 15

22 3 Doing more P520 Changing frame and slide show settings For P520 frames, use the Settings menu to customize your frame and your slide show options. 1 Tap (Home), then (Settings). 2 Slide, or tap below the slider arrows, to highlight a setting, then tap OK. 3 Follow the on-screen instructions. Tap OK to accept your selections. 4 Tap (Back) to exit. Settings menus Setting Upgrade firmware This option is only displayed if the upgrade file (.img) is available on the frame (memory card, flash drive, etc.). Options Upgrade firmware load the latest version of firmware on your frame (page 22). Exit return to the Home screen. 16

23 Doing more Setting Options Set up viewing options Sort change the arrangement, or sort order, of your pictures in a slide show by date or alphabetically by filename (page 10). Slide duration specify how long each picture is displayed in a slide show, from 3 seconds to 1 hour. (The default is 5 seconds.) Transitions specify the transition style between pictures in a slide show. See screen for options. The default is Random. Frame orientation Display your frame in landscape (default) or portrait orientation. Screen Fit or Fill Fit entire image (default). Show the entire picture. Black borders may appear around the image. Fill the screen.the picture fills the entire screen; some of the picture may be cut off (cropped). Brightness Slide to adjust the screen brightness according to your lighting conditions. Clock and timer On/Off schedule set your frame to turn on and off at a specified time every day (page 21). Set time manually set the clock to the current time (page 21). Language Choose your language (page 4). About Check your frame model, serial number, and firmware version. 17

24 Doing more P720/P820 Changing frame and slide show settings For P720 and P820 frames, use the Settings menu to customize your frame. Use Slide Show Options to customize how you view your slide shows. Settings menus 1 Tap (Home), then (Settings). 2 Slide or tap below the slider arrows to highlight a setting, then tap OK. 3 Follow the on-screen instructions. Tap Save to accept your selections. 4 Tap (Back) to exit. Setting Upgrade firmware This option is only displayed if the upgrade file (.img) is available on the frame (memory card, flash drive, etc.). Options Upgrade firmware load the latest version of firmware on your frame (page 22). Exit return to the Home screen. 18

25 Doing more Setting Options Set up viewing options Slide duration specify how long each picture is displayed in a slide show, from 3 seconds to 1 hour. (The default is 5 seconds.) Transitions specify the transition style between pictures in a slide show. See screen for options. The default is Random. Shuffle play the images in random order. Turn On or Off (default). Brightness Slide to adjust the screen brightness according to your lighting conditions. Frame orientation Display your frame in landscape (default) or portrait orientation. Screen Fit or Fill Fit entire image (default) Show the entire picture. Black borders may appear around the image. Fill the screen The picture fills the entire screen; some of the picture may be cut off (cropped). Slide show starting point When pictures are sorted from oldest to newest, start your slide shows from: One week back Only see your newest pictures. Oldest pictures (default) Enjoy all the pictures in your current picture source. Clock and timer On/Off schedule set your frame to turn on and off at a specified time every day (page 21). Set time manually set the clock to the current time (page 21). Language Choose your language (page 4). About Check your frame model, serial number, and firmware version. 19

26 Doing more Slide Show Options 1 From thumbnails view or a full screen single view, tap (Slide show options). 2 Slide, or tap below the slider arrows, to highlight a setting, then tap OK. 3 Follow the on-screen instructions. Tap OK to accept your selections. 4 Tap (Back) to exit. Setting Sort Options Change the arrangement, or sort order, of your pictures in a slide show by date or alphabetically by filename (page 10). Slide duration Specify how long each picture is displayed in a slide show, from 3 seconds to 1 hour. (The default is 5 seconds.) Transitions Specify the transition style between pictures in a slide show. See screen for options. The default is Random. Shuffle Plays the images in random order. Turn On or Off. Slide show starting point When pictures are sorted from oldest to newest, start your slide shows from: One week back only see your newest pictures (default). Oldest picture enjoy all the pictures in your current picture source. Screen Fit or Fill Fit entire image (default). Show the entire picture. Black borders may appear around the image. Fill the screen.the picture fills the entire screen; some of the picture may be cut off (cropped). 20

27 Doing more Setting the clock and timer Manually setting the clock 1 Tap (Home), then (Settings). 2 Highlight Clock and timer, then tap OK. 3 Highlight Set time, then tap OK. 4 Slide to set the hour. Tap the right arrow to highlight the next setting (minutes), then slide to adjust it. 5 Tap OK or Save to accept your changes. Setting automatic on/off Set your frame to turn on and off at a specified time every day. NOTE: Set the clock before enabling auto on/off. 1 Tap (Home), then (Settings). 2 Highlight Clock and timer, then tap OK. 3 Highlight On/Off schedule, then tap OK. The current time is displayed and the hour field is highlighted. 4 Set the Turn on time. Slide to adjust the hour. Tap the right arrow to highlight the next setting (minutes), then slide to adjust it. Repeat to set Turn off time. NOTE: Make sure the on time is earlier than the off time. 5 Tap Enable, then OK or Save when you re done. Your frame will now automatically turn on and off at the times you specified. If your frame loses power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock after losing power, page

28 Doing more Upgrading your firmware Firmware is the software that runs on your frame. To check for the latest version, visit Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to 2 Follow the screen directions to download the frame firmware to your computer. 3 Copy the IMG file to the root directory of a memory card or USB flash drive, then insert into the frame. The frame recognizes the upgrade file on the inserted device and makes the Firmware Upgrade option available in the Settings menus. 4 Tap (Home), then (Settings). 5 Highlight Firmware Upgrade, then tap OK to begin the upgrade. IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive during the upgrade! When the upgrade is complete, your frame automatically restarts. If it doesn t, press the power button to turn the frame off, wait a few seconds, then press it again to turn the frame back on. 22

29 Installing the software Doing more Follow these directions to install the software that was packaged with your frame. The CD contains two applications that work well independently, but also work together for the best experience with your frame: CD packaged with your frame Kodak EasyShare digital display software manage your frame, organize your pictures and videos, and copy between your frame and computer (see page 13). Kodak EasyShare software organize, edit, and share your pictures. Install the software 1 Close all software applications that are open on your computer (including anti-virus software; see the anti-virus software manual for details). 2 Place the EasyShare software CD into the CD-ROM drive. 3 If the Install Wizard does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. 4 Follow the on-screen instructions to install the software. Select Typical to install EasyShare digital display software and to update a previous version of EasyShare software. If you do not have a previous version of EasyShare software on your computer, you can click Custom and choose both applications for a new installation. NOTE: When prompted, take a few minutes to electronically register your picture frame and software. To register later, visit 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. The software icon(s) appear on your desktop when the installation is complete. 23

30 Doing more Customizing your frame Customize your frame with decorative mattes and/or faceplates (included with some frame models). Additional faceplates are available for purchase. When you are not using the matte, reapply it to the liner and store in a plastic bag to keep the adhesive backing clean. Matte Faceplate Frame Use a medium Phillips head screwdriver to tighten the clips on the back of the faceplate, if necessary. Maintaining your frame, faceplates, and mattes IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame, LCD, faceplate, or matte with a clean, dry, lint-free cloth (included). For fingerprints on the frame, apply light pressure. 24

31 Doing more Learning more about your frame Frame accessories, including decorative faceplates and custom mattes Interactive troubleshooting and repairs Interactive tutorials FAQs Downloads Product registration 25

32 4 Troubleshooting and support For step-by-step product support, visit and select Interactive Troubleshooting & Repairs. Picture frame problems If... Frame does not turn on. Nothing happens when a memory card, camera, or USB device is connected. Touch border doesn t work. Try one or more of the following Make sure the power cable that was included with your frame is connected securely (see page 2). Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release. Insert a certified SD/MMC/MS/xD card with images into the designated card slot, then push to seat it (see page 5). In the top card slot, make sure the card is seated flush with the top. Make sure the USB cable that was included with your camera or USB device is connected securely (see page 6). Make sure the file format of your pictures is supported (see page 30). NOTE: A large picture file may take time to appear. Use your finger to make your selections on the touch-sensitive borders (see page 3). IMPORTANT: Do not slide on the right border (tap only). Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release. 26

33 Troubleshooting and support If... Frame freezes up. You set automatic on/off but the frame doesn t turn on and off at the specified times. Resetting the clock after losing power If you turn off the power on the frame or otherwise lose power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. When you turn the frame back on, the set time screen appears on the frame. Slide to set the hour. Tap the left/right arrows to highlight the previous or next setting (hour, minutes), then slide to adjust the setting. Tap Save or OK. Try one or more of the following Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release. Use a paper clip or other slim object to press the recessed reset button on the back of the frame (see page ii). Make sure you Enabled the on/off setting after you set the times, then press OK (not Back). See page 21. If your frame loses power, the clock returns to the factory setting and auto on/off times are disabled. See Resetting the clock after losing power, page 27. The Home screen appears. The time is reset and the automatic on/off times (if set) are re-enabled. It is not necessary to reset the on/off times. NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and re-enable the automatic on/off times (see page 21). It is not necessary to reset the on/off times. 27

34 Troubleshooting and support Screen messages Screen message Create file failed. Write failed. Select another location. Unable to create file. Device write protected or full. Disk full. Try one or more of the following The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected. See your device documentation to remove write protection. Insert or connect a different device. The frame was unable to copy the picture. Insert a different card or device (page 6). The frame was unable to copy the picture. Insert a different card or device (page 6). Remove write protection, unlock card. Delete pictures from card. 28

35 Troubleshooting and support Screen message Error attempting to open file or directory. Error duplicate filename. Error occurred while closing a file. Error invalid filename Error reading from file. Error writing from file. Error writing a file. Error writing to a file. File Copy Failed! Internal error. Parameter is invalid. Unknown error. Try one or more of the following Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at

36 5 Appendix Digital frame specifications For more specifications, visit Kodak EasyShare P520, P720, P820 digital frames Color display P cm (5 in.) diagonal analog LCD, 320 x 234 pixels, 4:3 aspect ratio, 103 x 75 mm (4.0 x 2.9 in.) viewable area P cm (7 in.) diagonal analog LCD, 480 x 234 pixels, 16:9 aspect ratio, 154 x 87 mm (6.1 x 3.4 in.) viewable area P cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect ratio, 177 x 99 mm (7.0 x 3.9 in.) viewable area Internal memory None Power, 5V AC US Input: V AC, 60Hz, 0.5 Amp max. Output: 5V DC, 1.5 A with EIAJ class 2 DC connector adapter WW Input: V AC, 50/60 Hz, 0.5 Amp max. Output: 5V DC, 1.5 A with EIAJ class 2 DC connector Picture formats JPEG, EXIF 2.2 Video/Music formats Not supported Memory cards MMC (MultiMedia Card); SD/SDHC (Secure Digital/Secure Digital High Capacity); Memory Stick, xd Temperature Operating Storage -4 to 140 F (-20 to 60 C) -22 to 185 F (-30 to 85 C) Size P x 14.4 x 3.2 cm (6.9 x 5.7 x 1.3 in.) P x 15.8 x 3.2 cm (8.9 x 6.2 x 1.3 in.) P x 18.1 x 3.3 cm (10.2 x 7.1x 1.3 in.) 30

37 Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit Use only a USB-certified computer equipped with a current-limiting motherboard. Contact your computer manufacturer if you have questions. Upgrading your software and firmware Upgrade to the latest versions of the software included on the Kodak EasyShare software CD and the frame firmware See page 22 for upgrading firmware. Additional care and maintenance Wipe the frame, LCD, faceplate, and matte gently with a soft, lint-free cloth (included). Do not use cleaning solutions unless designed specifically for LCD screens. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. For digital frame disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at or visit

38 Appendix Limited warranty Kodak warrants Kodak consumer electronic products and accessories ( Products ), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair. Limited warranty coverage Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodak 's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product, and disclaims the implied warranties of 32

39 Appendix merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed. Your rights Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction. Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act. 33

40 Appendix FCC compliance and advisory Kodak EasyShare P520/P720/P820 digital frame This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/tv technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 34

41 Appendix CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Canadian DOC statement DOC Class B Compliance This Class B digital apparatus complies with Canadian ICES-003. Observation des normes-classe B Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Waste Electrical and Electronic Equipment labeling EU: It is the final user s responsibility to discard this equipment into an approved, segregated collection scheme to enable its suitable treatment/disposal and to improve human/environmental protection. For more information, see your retailer, local authority, or Australian C-Tick N137 Russian GOST-R Eastman Kodak Company Rochester, New York

42 Appendix China RoHS Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit

43 Index 1 A about, frame, 17, 19 accessories, 24, 25 automatic on/off, 17, 19, 21 C cables power, 2 USB, connecting, 6 camera, connecting, 6 card, memory copying with, 13 inserting/removing, 5 slot locations, ii changing picture locations, 8 cleaning frame, 24, 31 clock and timer, setting, 17, 19, 21, 27 copying from computer, 13 from EasyShare software, 14 on frame, 11 D deleting pictures, 11 displaying slide show, 9 disposal, recycling, 31 E EasyShare digital display software copying pictures, 13 installing, 23 EasyShare software copying pictures from, 14 installing, 23 error messages, 28 F faceplate, 24 firmware checking version, 17, 19 upgrading, 16, 18, 22, 31 flash drive, connecting, 6 frame, picture attaching stand, 1 changing orientation, 7 checking model, firmware, serial number, 17, 19 cleaning, 24 customizing, 24 setup, 1 specifications, 30 support Web links, 25 troubleshooting, 26 turning on/off, 2 H help troubleshooting problems, 26 Web links, 25 home changing picture locations, 8 screen,

44 Index I installing software, 23 internal memory, not available, 30 L landscape, set orientation, 7, 17, 19 language setting, 17, 19 setting first time, 4 loading software, 23 M magnify picture, 10 maintaining frame, 24 matte, 24 memory card. See card, memory mounting desktop stand, 1 on wall, 7 O on/off button, ii setting automatic, 17, 19, 21 orientation setting, 1, 7, 17, 19 P P520 frames, settings, P720/P820 frames, settings, pictures copying from computer, 13 copying from EasyShare software, 14 copying on frame, 11 deleting, 11 location, changing, 8 selecting more than one, 12 sorting, 10 viewing, 8 portrait, set orientation, 7, 17, 19 power connecting cable, 2 turning on, 2 power button, ii Q quick touch borders, 3 R recycling, disposal, 31 regulatory compliance, 34 reset button, ii rotate picture, 10 running slide show, 9 S safety information, 31 screen cleaning, 31 error messages, 28 selecting, 3 selecting multiple pictures, 12 on screen, 3 serial number, checking, 17, 19 setting auto on/off, 17, 19, 21 language, 17, 19 language first time, 4 time, 17, 19 viewing options, 17,

45 Index settings P520 frames, P720/P820 frames, setup, picture frame, 1 single picture display, 10 slide show duration, setting, 17, 19 P520 options, 17 P720/P820 options, 20 running, 9 transitions, setting, 17, 19 software installing, 23 upgrading, 31 sorting by date/filename, 10 source, picture location, 8 specifications, frame, 30 stand, attaching, 1 support troubleshooting, 26 Web links, 25 U upgrading firmware, 16, 18, 22 firrmware, 31 software, 31 USB device, connecting, 6 V viewing full screen picture, 10 pictures, 8 thumbnails, 9 W wall mounting, 7 warranty, 32 Web links, 25 Z zoom picture, 10 T thumb drive. See flash drive, 6 thumbnails, 9 time, setting, 17, 19 touch borders, screen, 3 transitions, slide show, 17, 19, 20 troubleshooting error messages, 28 frame, 26 turning on/off frame,