USB 3.1 Gen 2 vs. USB 3.1 Gen 1 vs. USB 2 vs. SATA vs. esata. by Francis Chao

Transcription

1 USB 3.1 Gen 2 vs. USB 3.1 Gen 1 vs. USB 2 vs. SATA vs. esata by Francis Chao fchao2@yahoo.com

2 Web Location for Presentations: Click on Meeting Notes 2

3 SUMMARY After a promising start in 2008, esata fell by the wayside with the universal availabity of USB 3.0 in Then in 2013, USB 3.0 was renamed to "USB 3.1 Generation 1". Now, "USB 3.1 Generation 2" and it's associated multi-talented "USB Type-C" connector standard is the emerging standard for both mobile devices and computers. 3

4 TOPICS TRENDS IN CABLE TECHNOLOGY SATA AND esata BASICS USB BASICS EMPIRICAL SPEED COMPARISON TESTING USB PORTS AND EQUIPMENT 4

5 TOPICS (continued) FUTURE-PROOFING EQUIPMENT PURCHASES USING CABLE EXTENSIONS FUTURE OF "USB 3.1 GEN 2" AND "USB 3.1 TYPE-C" 5

6 TOPICS (continued) ADDING USB 3.1 GEN 2 WITH TYPE-C OR USB 3.1 GEN 2 WITH "STANDARD B" TO AN EXISTNG COMPUTER 6

7 TRENDS IN CABLING TECHNOLOGY Increasing data throughput speeds Decreasing size of connectors Increasing power for powering and charging devices Decreasing allowable cable lengths Increase complexity at both ends and inside the cables 7

8 SATA AND esata BASICS "SATA" means "Serial Advanced Technology Attachment" "esata" means "external Serial Advanced Technology Attachment" Serial ATA International Organization (SATA-IO) has a Web site at 8

9 SATA AND esata BASICS (continued) Current SATA hard drives conform to standard called "SATA Revision 3" which runs at 6 Gigabits per second. "SATA III" is not a permitted term. When it is used, it is incorrectly used to refer to "SATA 2 running at 3 Gigabits per second which is now obsolete. 9

10 SATA AND esata BASICS (continued) Almost everyone has "SATA Revision 3" technology in their computers: SATA hard drives are currently in 99 percent of consumer computers. Most computers purchased since 2005 have SATA hard drives connected to SATA connectors on the motherboard. 10

11 SATA AND esata BASICS (continued) esata is essentially SATA with shielding and different tougher connectors "SATA" and "esata" is a 7-wire/7- pin technology esata and SATA have the same number of wires/pins and their signal formats are the same 11

12 SATA AND esata BASICS (continued) esata was a momentary "flash in the pan" in 2009: Almost no one has esata in their computers. esata-only hard drives and enclosures are non-existent. Some USB hard drives and enclosures also have an esata port. 12

13 SATA AND esata BASICS (continued) Maximum cable length of inches for SATA (1 meter) Maximum cable length of 6 1/2 feet (2 meters) for esata 13

14 SATA AND esata BASICS (continued) SATA and esata only works for hard drives: Cannot connect keyboard, mice, and other devices. SATA only connects to internal hard drives that have a SATA connector. esata only connects to external hard drives and enclosures that have an esata jack 14

15 SATA AND esata AND BASICS (continued) Cheapest technology to add hard drives to an existing computer: Use passive SATA cable for SATA connections and use a passive SATA-to-eSATA bracket or cable for esata. 15

16 SATA AND esata AND BASICS (continued) When purchasing SATA and esata cables and connectors, it is easy to confuse the two technologies: 16

17 SATA AND esata AND BASICS (continued) When purchasing SATA and esata cables and connectors, it is easy to confuse the two technologies: 17

18 SATA AND esata AND BASICS (continued) Two SATA data connections from motherboard to SATA hard drive: 18

19 19

20 20

21 21

22 SATA AND esata AND BASICS (continued) SATA data connection from motherboard to an internal SATA hard drive: 22

23 23

24 SATA AND esata AND BASICS (continued) SATA power cable from power supply of a desktop computer to an internal SATA hard drive: 24

25 25

26 SATA AND esata AND BASICS (continued) esata connection : motherboard's SATA port connects to an SATA-to-eSATA adapter bracket which connects to an esata cable to which connects to an esata external hard drive enclosure: 26

27 27

28 28

29 29

30 30

31 31

32 32

33 33

34 34

35 SATA AND esata AND BASICS (continued) No solely esata hard drives enclosures are currently available for purchase as new items Vantec sells some hard drive enclosures that have both an esata port and a USB "Standard Type-A" port: 35

36 36

37 37

38 38

39 39

40 SATA AND esata AND BASICS (continued) References: ATA _device_bandwidths 40

41 USB BASICS Standards organization: USB-IF = "USB Implementors Forum See USB specifications: USB 1.0, USB 1.1, USB 2.0, and USB 3.1, USB Type-C All USB specifications are available for free at 41

42 USB BASICS (continued) USB data rates: Low-Speed = 1.5 Megabits/sec Full-Speed = 12 Megabits/sec High-Speed = 480 Megabits/sec Super Speed = 5 Gigabits/sec Super Speed+ = 10 Gigabits/sec. 42

43 43

44 USB BASICS (continued) Reference for previous slide: o-hub/usb-type-c-and-usb-3-1- explained/ 44

45 45

46 USB BASICS (continued) In April 2000, USB 2.0 was introduced USB 2.0 runs at 480 Megabits per second half-duplex At this time, "Standard Type-A", "Mini Type-A", "Micro Type-A", "Standard Type-B", "Mini Type-B", and "Micro Type B" connectors were defined 46

47 47

48 USB BASICS (continued) In November 2008, the USB 3.0 standard was released. USB 3.0 runs at 5 Gigabits per second full-duplex. 48

49 49

50 USB BASICS (continued) In July 2013, "USB 3.0" was retroactively renamed to "USB 3.1 Generation 1" Most equipment specifications refer to it as "USB 3.1 Gen 1" Like the superseded "USB 3.0" standard, "USB 3.1 Gen 1" runs at 5 Gigabits per second full-duplex. 50

51 51

52 USB BASICS (continued) Also in July of 2013, "USB Type-C" standard was issued: It specifies oval USB Type-C connectors that are smaller than the legacy "Standard Type-A" and "Standard Type-B" connectors. The cables that conform to the Type- C specification are end reversible and each end is up-down reversible. 52

53 53

54 54

55 55

56 56

57 57

58 USB BASICS (continued) "USB Type-C is a versatile cabling specification that can be used for "USB 2.0", "USB 3.1 Gen 1", "USB 3.1 Gen 2", headset analog audio, "Thunderbolt 3", HDMI and many combinations of voltage and amperage for charging devices. 58

59 USB BASICS (continued) At the same time in July 2013, the "USB 3.1 Generation 2" standard was issued Most equipment specifications refer to it as "USB 3.1 Gen 2" "USB 3.1 Gen 2" runs at 10 megabits per second 59

60 USB BASICS (continued) "USB 3.1 Gen 2" can run over EITHER Type-C cabling and connectors OR "USB 3.1 Gen 2" can run over legacy Type-A cabling and connectors 60

61 USB BASICS (continued) When "USB 3.1 Gen 2" is operated over legacy Type-A cabling and connectors, the versatility of Type-C cabling such as analog audio transmission, PD "Power Delivery" options, and "Alternate Modes" will be missing. 61

62 62

63 63

64 USB BASICS (continued) The "practical speeds" that we get as computer users will improve as new models of the the chip sets on both ends (and inside the cable in the case of USB 3.1 Generation 2) are released each year Reference for the previous slides: b_30 64

65 65

66 USB BASICS (continued) Reference for the previous slide: /USB_Type_C.pdf 66

67 USB BASICS (continued) The "practical speeds" that we get as computer users will improve as new models of the the chip sets on both ends (and inside the cable in the case of USB 3.1 Generation 2) are released each year Reference for the previous slides: b_30 67

68 USB BASICS (continued) See 72-why-storage-drive-speeds-donthit-their-theoretical-limits/ 68

69 USB BASICS (continued) Physical configuration: "USB 1" is a 4-wire/4-pin technology "USB 2" is a 4-wire/4-pin technology "USB 3.1 Gen 1" is a 9-wire/9-pin technology "USB 3.1 Gen 2" is a 24-wire/24-pin technology 69

70 USB BASICS (continued) 16.4 feet (5 meter) limitation for "USB 2 cables 6 feet for "USB 3.1 Gen 1" cables running at "USB 3.1 Gen 1" speeds 3 feet for for "USB 3.1 Gen 2" cables running at "USB 3.1 Gen 2' speeds 70

71 USB BASICS (continued) To extend the total cable length for a USB device, you can use passive USB extension cables or active USB extension cables To extend the cable length beyond the normal capabilities for a passive of USB cables, you have to use active USB hubs and active USB extension cables which will give you more cable length. 71

72 USB BASICS (continued) To extend a USB 3.1 Generation 2 device beyond about 3 feet from your computer, you will have to buy optical cables with chipsets inside them at both ends to convert from copper wires to optical fibers and each end of the cable. These optical-enhanced cables have not been designed yet. 72

73 USB BASICS (continued) See Section 3.1 (pages 27 and 28) of the USB Type-C Specification 73

74 CONFIGURATION OF A USB 2 CABLE PC SIDE SIDE: "USB 2 TYPE-A" plug ---4 CONDUCTORS OF WIRE--- EQUIPMENT SIDE: "USB 2 TYPE-B" PLUG See

75 CONFIGURATION OF A "USB 3 A TO B" CABLE PC SIDE SIDE: "USB 3 TYPE-A" PLUG ---9 CONDUCTORS OF WIRE--- EQUIPMENT SIDE: "USB 3 TYPE-B" PLUG See 75

76 CONFIGURATION OF A "USB 3" "STANDARD TYPE-B" CONNECTOR 76

77 PINOUT OF A "USB 3 "STANDARD TYPE-B" CONNECTOR 77

78 PINOUT OF A "USB 3" "STANDARD TYPE-A" CONNECTOR 78

79 CONFIGURATIONS OF USB PERIPHERALS PC SIDE EQUIPMENT SIDE "USB 2 TYPE A" PORT ---->"USB 2 A to B" CABLE ---->"USB 2 TYPE-B PORT (= PURE "USB 2") 79

80 CONFIGURATIONS OF USB PERIPHERALS PC SIDE EQUIPMENT SIDE "USB 3 TYPE A" PORT ----->"USB 3 A to B" CABLE ----->"USB 3 TYPE B" PORT (= PURE USB 3.1 GEN 1 OR GEN 2") 80

81 CONFIGURATIONS OF USB PERIPHERALS PC SIDE EQUIPMENT SIDE "USB 2 TYPE A" PORT ----->"USB 3 A to B" CABLE ----->"USB 3 TYPE B" PORT (= FORWARD COMPATIBILITY BUT YOU GET USB 2 SPEEDS) 81

82 CONFIGURATIONS OF USB PERIPHERALS PC SIDE EQUIPMENT SIDE "USB 3 TYPE A" PORT ----->"USB 2 A to B" CABLE ----->"USB 2 TYPE B" PORT (= BACKWARD COMPATIBILITY BUT YOU GET USB 2 SPEEDS) 82

83 CONFIGURATIONS OF USB PERIPHERALS PC SIDE EQUIPMENT SIDE "USB 3 TYPE-A" PORT >"USB 2 A TO B" CABLE ----->"USB 3 TYPE-B" PORT (= BACKWARD COMPATIBILITY BUT YOU GET USB 2 SPEEDS) 83

84 CONFIGURATIONS OF USB PERIPHERALS "USB 2 A to B" cables are forward compatible at both the "A" computer end and the "B" equipment end When you use a "USB 2 A to B" cable to attach to a "USB 3 Type-A" computer jack, you get USB 2 speeds In order to get "USB 3.1 Gen 1 or Gen 2" speeds, the jack at the computer end, the cable, and the jack at the equipment end all have to be "USB 3 Type-" 84

85 FORWARD COMPATIBILITY OF "USB 2 A to B" CABLES AT BOTH THE COMPUTER END AND THE EQUIPMENT END You can use a USB 2 cable to attach a USB 3 device to a USB 2 or USB 3 port in a computer. You can use a USB 2 cable to attach a USB 2 device to a USB 3 jack in a computer. 85

86 FORWARD COMPATIBILITY OF "USB 2 TYPE-A" PORTS AT THE COMPUTER END "USB 2 Type-A" ports at the computer end are forward compatible: o A "USB 2 Type A" port at the computer end will accept a "USB 3 Type A" plug at the computer end. o You will get "USB 2" speeds if you do this. 86

87 BACKWARD COMPATIBILITY OF "USB 3 TYPE-A" PORTS AT THE COMPUTER END A "USB 3 Type-A" port at the computer end will accept a "USB 2 A to B" cable s "Type-A" connector. 87

88 BACKWARD INCOMPATIBILITY OF "USB 3 A TO B" CABLES AT THE EQUIPMENT END "USB 3 A to B" cables are not backward compatible at the ("B ) equipment end: You cannot use a USB 3 A to B" cable's "Type-B" plug to attach to a "USB 2 Type-B" port at the equipment end. 88

89 BACKWARD COMPATIBILITY OF "USB 3 TYPE B" PORTS AT THE EQUIPMENT END A "USB 3 Type-B" port at the equipment end will accept the "Type-B" plug of a "USB 3 A to B" cable or the "Type B" plug of a "USB 2 A to B" cable. 89

90 AN EMPIRICAL SPEED COMPARISON BETWEEN SATA, esata, USB 2, USB 3.1 Gen 1, USB 3.1 Gen 2 (January 2017) 90

91 METHODOLOGY FOR COMPARING DATA SPEEDS OF "USB 2", "USB 3", AND "esata" DEVICES The same 1-Terabyte Seagate "Barracuda" ST AS" SATA hard drive was used for all tests. An Intel 1-Terabyte "SSD5" solid state drive was used for the comparison between USB 3.1 Gen 1 and Gen 2 ports. 91

92 METHODOLOGY FOR COMPARING DATA SPEEDS OF "USB 2", "USB 3", AND "esata" DEVICES Software Used: 64-bit version of "Portable Edition" of "CrystalDiskMark 3" version freeware 92

93 FREE "CRYSTALDISKMARK" SOFTWARE FOR BENCHMARKING HARD DRIVES Use the 64-bit "Portable Edition" of "CrystalDiskMark" since it is malware-free. Do not use the non-portable version of "CrystalDiskMark" since it some versions of it install the "OpenCandy" adware malware into your "Windows" computer. 93

94 FREE "CRYSTALDISKMARK" SOFTWARE FOR BENCHMARKING HARD DRIVES (continued) The 64-bit version of "Portable Edition" of "CrystalDiskMark 3" is safe, malware-free freeware from ad/index-e.html 94

95 95

96 96

97 97

98 FREE "CRYSTALDISKMARK" SOFTWARE FOR BENCHMARKING HARD DRIVES (continued) Manufacturers of solid state drives (SSDs) report this value in their specifications sheets and marketing literature: 98

99 99

100 FREE "CRYSTALDISKMARK" SOFTWARE FOR BENCHMARKING HARD DRIVES (continued) Manufacturers of rotating hard drives report this value in their specification sheets and their marketing literature: 100

101 101

102 102 TEST 1: RAW TEST RESULTS SATA 3 at 6 Gigabits per second is equivalent in speed to esata 3 at 6 Gigabits per second: "SATA 3 at 6 Gigabits per second for Seagate 1-TB mechanical HD "esata 3 at 6 Gigabits per second for Seagate 1-TB mechanical HD

103 103 TEST 2: RAW TEST RESULTS SATA 3 at 6 Gigabits per second was equivalent to USB 3.1 Generation 1 at 5 Gigabits per second: "SATA 2 at 3 Gigabits per second for Seagate 1-TB mechanical HD "USB 3.1 Gen 1 at 5 Gigabits per second for Seagate 1-TB mechanical HD

104 104 TEST 3: RAW TEST RESULTS USB 3.1 Gen 1 (formerly known as USB 3.0) is about 3 times faster than USB 2.0 : "USB 2.0 cable to connect to Seagate 1- TB mechanical HD "USB 3.1 Generation 1 cable to connect to Seagate 1-TB mechanical HD

105 105 TEST 4: RAW TEST RESULTS USB 3.1 Generation 2 (=USB 3.0) is about 46 percent faster than USB 3.1 Generation 1: "USB 3.1 Generation 1" "Standard-A" port connected to Intel 1-TB "SSD5" "USB 3.1 Generation 2" "Standard-A" port" connected to Intel 1-TB "SSD5"

106 106 TEST 5: RAW TEST RESULTS No speed differences between USB Type-C ports and USB Standard Type-A ports for USB 3.1 Generation 2 "USB 3.1 Generation 2" "Standard-A" port connected to Intel 1-TB "SSD5" "USB 3.1 Generation 2" "Type-C" port" connected to Intel 1-TB "SSD5"

107 TESTING USB PORTS AND EQUIPMENT To test USB ports, cables, and equipment, you can download and install the free "USBTreeView" software into a "Windows.." computer at ad 107

108 TESTING USB PORTS AND EQUIPMENT (continued) If you do not have any "USB 3.1 Generation 2" equipment, download the "old" V2.0.2 version of USBTreeView since it is easier to use. Only use the "latest release" if you have a "USB 3.1 Generation 2" "USB A" or "Type C" port on your computer. 108

109 TESTING USB PORTS AND EQUIPMENT (continued) When you have a USB 3.1 device attached to a USB 3.1 port and the port type changes from "3.0" to "2.0" or a USB 3 device disappears from view entirely, a failure of the attached USB 3 devices, or the connecting USB 3 cable or the USB 3 port is imminent. You can determine which of these three items is about to fail by means as substituting with a "known good" USB 3 port, a "known good" (or shorter) USB 3 cable, or a "known good" USB 3 device. 109

110 110

111 111

112 112

113 113

114 TESTING USB PORTS AND EQUIPMENT (continued) If the "USBTreeView" window flashes a lot and/or it shows a certain device constantly switching between USB 3.1 Generation 1, USB 3.1 Generation 2, and/or USB 2.0, then you either have a bad USB device, a bad USB cable, or a bad USB port on your computer 114

115 TESTING USB PORTS AND EQUIPMENT (continued) One USB device, cable, or port can affect other USB devices, resulting in a computer that appears very slow and/or very unstable to the computer user 115

116 FUTURE-PROOFING USB EQUIPMENT PURCHASES Do not buy "USB 3.1 Gen 1"-only hubs that are "..Gen 1" at both the computer end and the equipment end No "USB hubs" are available that run at "..Gen 2" speeds at the equipment end 116

117 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) For compatibility with both Type-A and legacy Standard Type B ports at the computer end, buy only USB 3.1 hubs that have a Standard Type A port at the computer end. This type of hub will have a USB 3 Type-A to Type-C cable for the computer end. 117

118 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) Then buy a separate USB 3 Type-A to Type-A cable for connecting to legacy Standard Type- A ports on older computers. 118

119 119

120 120

121 121

122 122

123 123

124 124

125 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) A few of the models of this type of hub will have a Type-A to Type-C cable for the computer end: 125

126 126

127 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) The Type-C end of the Type-A to Type-C cable inserts into the Type-C port of your recent-model computer: 127

128 128

129 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) The Type-A end of the Type-A to Type-C cable inserts into the Type-A port of the hub: 129

130 130

131 FUTURE-PROOFING USB EQUIPMENT PURCHASES (continued) Then buy a separate Type-A to Type- A cable for connecting to legacy Standard USB Type-A ports on older computers: 131

132 132

133 133

134 134

135 USING CABLE EXTENSIONS: You can use active cable extensions to move your computer farther away from your monitor, keyboard, and mouse farther away from where you sit, as far as to the next room: 135

136 HDMI cable with Redmere Technology (up to 35 feet) wall or soundblocking furniture Active USB 3 extension cable (up to 32 feet for USB 2 devices) 136 Powered USB 3 hub

137 USING CABLE EXTENSIONS: For our advice on using cable extensions to move your computer farther away from your monitor, keyboard, and mouse, see dsig/redmere/redmere-etc.pdf 137

138 FUTURE OF "USB 3.1 GEN 2" AND "USB TYPE C" Audio Adapter Accessory Mode Alternate Modes Thunderbolt Mode DisplayPort Mode Thunderbolt 3 Use of Type-C e-marker chips in e-marked cables "PD" Power Delivery standards 138

139 FUTURE OF "USB 3.1 GEN 2" AND "USB TYPE C" (continued) In the very near future, we will see fiber optic "USB 3.1 Generation 2" cables that exceed 1 meter in length. These cables will have to convert repeater chips that convert the signal to fiber optics at each end. 139

140 ADDING USB 3.1 GEN 2 WITH TYPE-C OR USB 3.1 GEN 2 WITH "STANDARD B" TO AN EXISTNG COMPUTER The existing computer must have a free PCIe x4 slot or a free PCIe x8 slot or a free PCIe x16 slot 140

141 ADDING USB 3.1 GEN 2 WITH TYPE-C OR USB 3.1 GEN 2 WITH "STANDARD B" TO AN EXISTNG COMPUTER (continued) The following two PCIe adapters work for both Windows.. and Linux computers: 141

142 142

143 143

144 144

145 145

146 146

147 147