MTP Outdoor Cabling System

Transcription

1 The AFL MTPE (MTP Elite) Low Loss outdoor cabling system offers a market leading, low loss, fast and efficient connection system for underground (UG) and outside plant applications. These assemblies offer quick and easy deployment for external/underground F multimode or singlemode circuits. Designed to be hauled through ducts and conduits. The modular MTP product set comprises underground cable assemblies, assembly hauling mechanisms, cassettes, heavy duty fanouts, 1/1.5/2/3 RU rack mount enclosures, wall mount enclosures including DIN rail mount. The reduced diameter loose tube style UG poly/nylon sheathed cable offers ease of installation and handling. AFL only use MTPE low loss connectors for enhanced performance and low link/channel losses. An optional glanded, re-useable water resistant hauling mechanism is available to suit old or compromised ducts and conduits. Additional UG cable options are available such as fiberglass armouring, for protection against rodent attack. Sacrificial and LSZH sheaths are also available. Site A Underground Duct Site B Features and Benefits Round mini UG cable suits Enterprise LAN, Infrastructure, Industrial and Telco applications Suits AFL s large range of SD/HD/XHD range of rack, wall and DIN MTPE enclosures Modular style suits easy redeployment or relocation Low loss MTPE connectors used for lower link/channel losses Complies with AS 3080, S008, AS 1049, ISO/IEC and TIA-568 requirements Reduced diameter UG cable construction offers reduced conduit/ duct usage, easier handling and reduced installation times MTP is a registered trademark of US Conec, Ltd. 153

2 Manufacturing Options MTP MTP UG Cables CABLE Fibre Count Cable Type Sheath Colour OS2 (SM 9/5 µm) OM4 (MM 50/5 µm) Round Mini UG Poly/Nylon Blue Additional Cable Options Round Mini UG FRP Armoured Sacrificial PE, LSZH Black CONNECTORS MTP Elite Low Loss Female, MTPE with Push/Pull tabs PC Polish (Multimode) or APC Polish (Singlemode) fibre ADDITIONAL OPTIONS Protective water resistant re-useable hauling mechanism with 20 mm compression gland 20 kg load rating Light duty, protective indoor use hauling mechanism. Compression gland optional. Custom RM breakout length (400 mm standard) TIA-568 connectivity methods A, B or C Cable drums Custom labelling Part Number Backbone and interface cables RMU 1 MTPFA X 20M Cable Type RMU Round Mini UG RMUFRP Round Mini UG FRP armoured 1 9/5 µm SM OS2 4 50/5 µm MM OM4 Connector A and B MTPF (MM female) MTPFA (SM female angled) (If both ends are the same use one connector reference only) Pair Cross X Crossover Length (m) Fibre Count Breakout Length mm mm mm Installation Options 2 Light duty protective mechanism end A 3 Light duty protective mechanism end Shipping Reel Requirements 2 Shipping Reel (recommended for lengths over 30 m) A Water resistant re-usable hauling mechanism End A B Water resistant re-usable hauling mechanism End 7 20 mm Gland fitted end A 8 20 mm Gland fitted end 154

3 Manufacturing Options MTP UG Heavy Duty Fanouts CABLE Fibre Count Cable Type Sheath Colour OS2 (SM 9/5 µm) OM4 (MM 50/5 µm) Round Mini UG Poly/Nylon Blue Additional Cable Options Round Mini UG FRP Armoured Sacrificial PE, LSZH Black CONNECTORS MTP Elite Low Loss Female or Male with Push/Pull tabs PC Polish (Multimode) or APC Polish (Singlemode) Hybrid Options SC, LCD, LCD Low Loss (< nm) ADDITIONAL OPTIONS Protective water resistant re-useable hauling mechanism with 20mm compression gland (MTP end only) 20 kg load rating Light duty, protective indoor use hauling mechanism. Compression gland optional. Custom MTP breakout length (400 mm standard) Custom LC/SC breakout length (500 mm standard, pairs staggered in 50 mm increments, total length 800 mm) Coloured oversleeving (2 mm oversleeving supplied as standard) Staggered connectors Cable drums Custom labelling ACCESSORIES MTP 6 port mounting bracket loaded with 6 aqua MTP adapters (MTP-MNTGBRKT-6AQ) MTP 1 port mounting bracket loaded with PART NUMBER 6 black MTP adapters (MTP-MNTGBRKT-6BK 1 aqua MTP adapter (MTP-MNTGBRKT-1AQ) 1 black MTP adapter (MTP-MNTGBRKT-1BK) RMU 1 MTPF LC 20M Cable Type RMU Round Mini UG SM OS2 RMUFRP Round 4 50/5 µm Mini UG FRP MM OM4 BT armoured 1 9/5 µm Connector A MTPF (MM female) MTPFA (SM female angled) MTPM (MM male) MTPMA (SM male angled) Connector B SC LC LC LL (LC s terminated as duplex with pair flip) Total Length (m) Fibre Count Breakout Length mm mm mm Oversleeving (Hybrid End) 8 Yellow 2 mm Duplex C Aqua 2 mm Duplex Installation Options 2 Light duty protective mechanism end A 3 Light duty protective mechanism end Shipping Reel Requirements 2 Shipping Reel (recommended for lengths over 30 m) A Water resistant re-usable hauling mechanism End A 7 20 mm Gland fitted end A 8 20 mm Gland fitted end 155

4 Technical Information CONNECTIVITY METHODS AFL s MTP cabling solution is configured to suit the connectivity methods as defined in TIA-568-C or custom configurations as required. Pair crossovers (pair flips) are recommended for duplex circuits. A number of configuration options are available for parallel optics applications. MTP ELITE CONNECTOR OPTICAL PERFORMANCE Multimode 850 nm (PC Polish) Singlemode 1310 nm (APC Polish) Average Insertion Loss 0.10 db 0.10 db Maximum Insertion Loss 0.35 db 0.35 db Minimum Return Loss >20 db >60 db Test Results per ANSI \ EIA Method D1 and IEC MTP ELITE CONNECTOR AND POLISHING STANDARDS AFL MTP connectors meet the endface geometry requirements of both IEC PAS and US Conec geometry guidelines (as verified by an array interferometer). MTP connectors are also compliant with FOCIS 5 and IEC Interferometer view of MTP connector end face geometry MALE/FEMALE MTP ELITE CONNECTOR CONFIGURATION MTP products can be manufactured as either male or female AFL supplies as standard: MTP cassettes manufactured as male (pinned) MTP MTP pre-terminated cables manufactured as female both ends MTP fanouts manufactured as both male (pinned) and female Variations can be manufactured upon request, please specify at time of order TIA-568-C / IEEE CHANNEL ATTENUATION AND DISTANCES TIA-568-C.0-2 defines maximum optical channel attenuation as follows: OM4 50/5 μm LOMMF Max Channel Attenuation Maximum Channel Distance Ethernet 10GBASE-S 3.1 db 450 m Ethernet 40GBASE-SR4/100GBASE-SR db 150 m Compliance with IEC or TIA channel losses are specified in most cabling environments. This low channel loss can apply to any network architecture and any number of cabling backbones and cross-connects. AFL s MTP cabling system has the lowest possible OM3/OM4 and OS1/2 channel loss via the US Conec MTP Elite connector combined with low loss, high tolerance LC cassette connectors and through adapters. PHYSICAL CABLE CHARACTERISTICS Cable Type Diameter (mm) Weight (kg/km) Max Tensile Load (N) Crush Resistance (N/100 mm) Operating Temperature ( C) RMU Round Mini F UG Poly Nylon (Short Term)

5 FIBRE PERFORMANCE Singlemode ZWP ITU-T G.657.A1 ITU-T G.652.D OM4 50/5 L.O.M.M.F. Wavelength (nm) Gigabit Ethernet Distance (m) 5 km GBASE-SR/SW Distance (m) 10 km / /100GBASE-SR/SW Distance (m) 150 Maximum Attenuation (db/km) Minimum Laser Bandwidth (MHz-km) Minimum LED Bandwidth (MHz-km) Reach assuming 3.0 db maximum cabled attenuation at 850 nm and 1.3 db total connection and splice loss 2. Supports 220 meter 10GBASE-LRM distance, or 300 meter 10GBASE-LRM distance with 300 meter capable equipment km for 1310 nm 10GBASE-LH, and 40 km for 1550 nm 10GBASE-LX km for 1310 nm 10GBASE-LR, and 40 km for 1550 nm 10GBASE-ER 5. Bending loss (radius 10 mm x 1 turn) is 0.5 db/km at 1550 nm (G.657.A1 SM Fibre) MTP CONNECTOR INSPECTION AND CLEANING All MTP connector endfaces are factory inspected and cleaned using US Conec and IEC guidelines. MTP connector cleanliness is critical for low loss performance. AFL recommends the use of MTP video inspection scopes, US Conec s MTP connector cleaners and high performance cleaning consumables. MTP Cabling System Accessories AFL offers a wide range of accessories to suit the installation, testing and patching of MTP cabling systems. These include: Connector video inspection equipment Connector cleaning products A range of LC patchleads specifically designed to suit high density patching AFL is also pleased to offer an extensive range of installation and testing documentation. Please contact us for further information In conjunction with our CBPs (Certified Business Partners) a 20 year Certified System Guarantee is also available to approved installations 157