P r o d u c t I n f o R M A T I O N - h i t p r o / h i t

Transcription

1 P r o d u c t I n f o R M A T I O N - h i t p r o / h i t Oticon Hit is a family of reliable, great sounding hearing instruments in the mid-to-low priced market. Powered by Oticon s RISE platform, featuring sector leading automatics and 8 khz bandwidth. Hit makes the fitting process straightforward and is quickly accepted by clients. Hit is suitable for all types of hearing losses within the mild to severeto-profound range and comes in a broad range of styles: RITE, ITE s and discrete BTE styles offering long battery life as well as a power solution. Hit comes in two full product lines at two attractive price points. F I T T I N G R A N G E HL k 2k 4k 8k Hz KEY FEATURES Increased Bandwidth Based on the RISE technology ultra fast audio processing provides superior, undistorted sound quality in all listening environments. In combination with 8 khz bandwidth the instrument delivers a rich sound picture. Advanced Feedback Control Oticon s Dynamic Feedback Cancellation system (DFC2) highly effectively eliminates feedback in most situations. Adaptive Directionality The directionality system increases the Voice-to-Noise ratio in challenging situations by suppressing moving and stationary noise sources from the sides and behind. There are two directionality modes: Surround and Split directionality. Noise Management A modulation-based Noise Management System which uses a speech-weighted approach to ensure that interfering noise is attenuated without notably affecting important speech cues this guarantees simultaneous good speech understanding and comfort. Discreet Design All BTE styles are small and discreet, combining robustness, high durability with user friendly ergonomics. All BTE styles are available in full colour shells. Standard Features m Bandwidth 8 khz m Automatic Directionality m Adaptive Directionality* m Noise Management (modulation) m Automatic Adaptation Manager* m Dynamic Feedback Cancellation 2 (DFC2) m Front Focus m Open Ear Acoustics m Corda2 thin tube solution m Wind noise protection m NAL - NL1 and DSL v5.a m[i/o] m Memory m Four user programs m DAI and FM m T-coil m AutoPhone program m Battery Low warning m Sound indicators for program shifts m On-set delay and jingle m Mute/Stand by mode m nearcom Cordless enabled *) Hit Pro only

2 PRODUCT OVERVIEW FITTING Hit Pro and Hit instruments are programmed using the Genie 9.1 Fitting Software or higher compatible with NOAH 3 or higher. They can be programmed using either programming cables #3 or cordlessly using nearcom. Fitting with cables CIC/MIC FlexConnect ITC/ITE Programming Adaptor BTE/RITE Programming Shoe Cordless fitting - nearcom nearcom provides a cordless link between NOAHlink and one or two wireless enabled hearing instruments. In addition nearcom provides a pass-through connection to accommodate programming cables and replaces the existing NOAHlink neck loop. RITE HL k 2k 4k 8k Hz BTE 312 BTE 13 BTE POWER CIC/MIC ITC ITE HL k 2k 4k 8k Hz HL k 2k 4k 8k Hz HL k 2k 4k 8k Hz HL k 2k 4k 8k Hz HL k 2k 4k 8k Hz HL k 2k 4k 8k Hz Micro Mould Dome Earmould Corda² Earmould Corda² OSPL (peak) Ear simulator cc coupler Full-on gain (peak) Ear simulator cc coupler Programs Cordless Fitting (nearcom) Yes Yes Yes Yes No Optional Optional Telecoil Yes Yes Yes Yes No Optional Optional AutoPhone Yes Yes Yes Yes No Optional Optional Volume control Configurable Configurable Configurable Configurable No No Optional FM compatible Yes Yes Yes Yes No No No Battery size Battery life, typical 8 hours 117 hours 2 hours 215 hours 115 hours 117 (1*) hours 117 (1*) hours (*) For non-wireless instruments FEATURES Hit Pro Hit RITE style Yes No Fitting formula NAL/DSL NAL/DSL Bandwidth 8 khz 8 khz Adaptive Directionality* Single-band No Automatic Directionality* Dual mode Dual mode Noise Management Yes Yes Automatic Adaptation Manager Yes No Fitting bands 6 4 User programs 4 4 *) Except CIC/MIC Speaker Unit Ear Piece Ear Grip Wax Protection RITE STYLE Available in four lengths: Short, Medium, Long and Extra Long (1-4) Open Dome: Available in three sizes - 6 mm, 8 mm, mm Plus Dome: One size Power Dome: Available in three sizes - 8 mm, mm, 12 mm Micro Mould: Requires taking an impression Ensures a secure and comfortable grip. One version fits left and right ear NoWax in speaker unit. WaxStop in Micro Mould Tamper resistant battery drawer Sound Hook Damper Thin Fiting BTE and RITE STYLES DAI Adaptor AP Dedicated FM Receiver Available in Standard Line and Cool2 colour ranges Interchangeable standard and paediatric hook (BTE s only) Damping element for replacement (BTE s only) Corda² (BTE 312 and BTE 13 only) Amigo R12 312: Only with blinking LED FM Adaptor FM 9 312: Compatible with Amigo R1 and R2 with blinking LED 13: Compatible with Amigo R1, R2 and other universal receivers Standard Line RITE and BTE Cool2 RITE and BTE Skin Custom instruments Chroma Beige () Blue (47) Beige (1) COLOUR SELECTION Silver Grey (91) Red (46) Light Brown (2) Steel Grey (92) Purple (45) Medium Brown (3) Chestnut Brown (93) Silver (44) Dark Brown (4) Baby Pink (43) Baby Blue (42) 2 3

3 r i t e IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL Omnidirectional mode is used unless otherwise stated. 1 RITE gain str_lo 14::1 RITE OSPL str_lo 13:44:32 1 RITE gain 2cc str_lo 13:59:29 RITE OSPL 2cc str_lo 13:45:2 Acoustic input: RITE MT Resp str_lo 14:25: Acoustic input: RITE MT Resp 2cc str_lo 14:26:9 OSPL Peak Hz Average 4 Full-on gain Peak Hz Average Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field 77 - ma/m field 97 - SPLITS L/R - 87/89 Total harmonic distortion Hz.3 %.1 % (Input ) Hz.5 %.3 % Hz.5 %.4 % Equivalent input noise level (A) Omni dir Battery consumption Quiescent 1.3 ma 1.3 ma typical 1.3 ma 1.3 ma Estimated battery life typical 8 hours (Size 312, IEC PR41) IRIL (IEC ) GSM/DECT -23/-12 4

4 B T E IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL Omnidirectional mode is used unless otherwise stated. 1 Corda 2 (size 1/.9) BTE OSPL str_lo 13:59: BTE gain str_lo 14:1:27 1 Corda 2 (size 1/.9) BTE OSPL 2cc 11 7 str_lo 13:59:59 BTE gain 2cc 11 7 str_lo 14:2:19 Acoustic input: BTE MT resp str_lo 15:47:54 Acoustic input: BTE MT Resp 2cc str_lo 13:34:47 OSPL Peak 126 (113*) 115 (8*) Hz 111 (97*) 5 (87*) Average 8 (4*) 5 (94*) Full-on gain Peak (53*) 51 (49*) Hz 51 (37*) 45 (27*) Average 47 (44*) 45 (34*) Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field 82 - ma/m field 2 - SPLITS L/R - 88/88 Total harmonic distortion Hz 1.2 %.7 % (Input ) Hz 1.7 %.9 % Hz.4 %.1 % Equivalent input noise level (A) Omni dir 26 Battery consumption Quiescent 1.1 ma 1.1 ma typical 1.2 ma 1.2 ma Estimated battery life typical 117 hours (Size 312, IEC PR41) IRIL (IEC ) GSM/DECT -18/-14 (*) For instruments fitted with Corda 2 5

5 B T E 1 3 IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL Omnidirectional mode is used unless otherwise stated. 1 Corda 2 (size 1/.9) Acoustic input: BTE13_711_MPO str_lo 13:5:14 BTE13_711_gain str_lo 13:23: BTE13_711_MT_UPDATE_ str_lo :3:53 1 Corda2 (size 1/.9) Acoustic input: BTE13_2cc_MPO str_lo 13:4:27 BTE13_2cc_gain str_lo 13:24:57 BTE13_2cc_MT_UPDATE_ str_lo :3:26 OSPL Peak 126 (121*) 118 (117*) Hz 122 (8*) 115 (*) Average 118 (114*) 114 (4*) Full-on gain Peak (54*) 51 (49*) Hz (36*) 43 (28*) Average 49 (45*) 45 (34*) Frequency range - Hz -7 Hz Telecoil output ( Hz) 1 ma/m field - ma/m field - SPLITS L/R - 95/95 Total harmonic distortion Hz.3 %.2 % (Input ) Hz.6 %.4 % Hz.3 %.2 % Equivalent input noise level (A) Omni dir Battery consumption Quiescent 1.2 ma 1.2 ma typical 1.2 ma 1.2 ma Estimated battery life typical 2 hours (Size 13, IEC PR48) IRIL (IEC ) GSM/DECT -27/-34 6 (*) For instruments fitted with Corda 2

6 B T E P O W E R IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL Omnidirectional mode is used unless otherwise stated. Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 1 Acoustic input: BTEP_711_MPO str_lo 13:9:1 BTEP_711_gain str_lo 14:12:16 BTEP_711_MT str_lo 13:19: Acoustic input: BTEP_2cc_MPO str_lo 13:8:35 BTEP_2cc_gain str_lo 14:13:6 BTEP_2cc_MT str_lo 13::38 OSPL Peak Hz Average Full-on gain Peak Hz Average Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field 93 - ma/m field SPLITS L/R - 99/99 Total harmonic distortion Hz 1.4 % 1. % (Input ) Hz.5 %.5 % Hz.4 %.3 % Equivalent input noise level (A) Omni dir Battery consumption Quiescent 1.2 ma 1.2 ma typical 1.2 ma 1.2 ma Estimated battery life typical 215 hours (Size 13, IEC PR48) IRIL (IEC ) GSM/DECT -28/-34 7

7 C I C / M I C IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL All measurements are made on instruments with NoWax protection. Omnidirectional mode is used unless otherwise stated _CIC_Full_on_gain_EPOQ_V str_lo 12::16 711_CIC_OSPL_EPOQ_V str_lo 12:38:59 1 2cc_CIC_Full_on_gain_EPOQ_V str_lo 12:: 2cc_CIC_OSPL_EPOQ_V str_lo 12:39:24 Acoustic input: 711_CIC_Frequence_responce_EPOQ_V str_lo 12:37:29 Acoustic input: 2cc_CIC_Frequence_responce_EPOQ_V str_lo 12:38:17 OSPL Peak Hz Average 4 Full-on gain Peak Hz Average Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field - - ma/m field - - SPLITS - - Total harmonic distortion Hz.6 %.3 % (Input ) Hz.9 %.4 % Hz 1.1 %.9 % Equivalent input noise level (A) Omni 18 dir - - Battery consumption Quiescent.7 ma.7 ma typical.7 ma.8 ma Estimated battery life typical 115 hours (Size, IEC PR) IRIL (IEC ) GSM/DECT -/-17 8

8 i t c IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL All measurements are made on instruments with NoWax protection. Omnidirectional mode is used unless otherwise stated. 1 ITC gain str_lo 13:57:44 ITC OSPL str_lo 13:42:5 1 ITC gain 2cc str_lo 13:57:17 ITC OSPL 2cc str_lo 13:41:34 Acoustic input: ITC MT Resp str_lo 13::9 Acoustic input: ITC MT Resp 2cc str_lo 15:51:4 OSPL Peak Hz Average Full-on gain Peak Hz Average Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field 74 - ma/m field 94 - SPLITS L/R - 87/87 Total harmonic distortion Hz.8 %.6 % (Input ) Hz 1. %.6 % Hz 1. %.6 % Equivalent input noise level (A) Omni dir Battery consumption Quiescent 1.1 (.9*) ma 1.1 (.9*) ma typical 1.2 (1.*) ma 1.2 (1.*) ma Estimated battery life typical 117 (1*) hours (Size 312, IEC PR41) IRIL (IEC ) GSM/DECT -38/-17 (*) For non-wireless instruments 9

9 I T E IEC 118- (1983) and 711 (1981) and DIN 455. OSPL ANSI S3.22 (3) and S3.7 (1995), IEC (5) and IEC (6). OSPL All measurements are made on instruments with NoWax protection. Omnidirectional mode is used unless otherwise stated. 1 ITE gain str_lo 13:58:57 ITE OSPL str_lo 13:43:1 1 ITE gain 2cc str_lo 13:58:18 ITE OSPL 2cc str_lo 13:42:38 Acoustic input: ITE MT Resp str_lo 15:52:26 Acoustic input: ITE MT Resp 2cc str_lo 13:51:3 OSPL Peak Hz Average Full-on gain Peak Hz 48 Average Frequency range - Hz - Hz Telecoil output ( Hz) 1 ma/m field 79 - ma/m field 99 - SPLITS L/R - 87/87 Total harmonic distortion Hz.7 %.5 % (Input ) Hz.8 %.4 % Hz.7 %.4 % Equivalent input noise level (A) Omni 17 dir Battery consumption Quiescent 1.1 (.9*) ma 1.2 (1.*) ma typical 1.2 (1.*) ma 1.3 (1.1*) ma Estimated battery life typical 117 (1*) hours (Size 312, IEC PR41) IRIL (IEC ) GSM/DECT -43/-21 (*) For non-wireless instruments

10

11 / 8.9 PEOPLE FIRST We believe that it takes more than technology and audiology to create the best hearing instruments. That s why we put the individual needs and wishes of people with hearing loss first in our development of new hearing care solutions.