for ipad Version 1.2.2

Transcription

1 for ipad Version 1.2.2

2 Overview CoreMIDI Scale/Chord Remapper Arpeggiator Patch OSC1 Sync/Ring OSC2 Sync/Ring OSC3 Filter 1 Filter 2 LP, BP, HP LP, BP, HP AMP Pan Saturator EQ Delay 1 Pan Filter Delay 2 Filter Output Recorder.wav File Export wav file via itunes Clipboard Compatible with Intua BeatMaker, GarageBand and so on.

3 Keyboard Exports patch via Patch browser Initializing patch Previous patch Next patch Pitch Bend Wheel Modulation Wheel Controller 1 CC1 CC16 MIDI CC16 MIDI CC18 MIDI CC17 MIDI CC19 Controller 2 Controller 3 Controller 4 CC17 CC18 CC19 MIDI CC1 Controller knobs do different things depend on the patch settings Recording will automatically start when an input note on message is coming. Audio Copy You can export your audio files to other applications installed on your ios device.(compatible with INTUA BeatMaker, Apple GarageBand and so on.) The recording time is limited to 3 minutes. Compatible applications Export Audio Files You can export your wav files via itunes File Sharing See for detail Recorded File Browser Scrollable piano keyboard You can switch octaves by dragging the lower border.

4 OSC1 (Oscillator 1) Pitch Octave Semitone Finetune Waveform for OSC1 OSC Pitch Random Sawtooth Pulse Triangle Sine Noise FM Wave Form OSC1 OSC Wave Shape Wave Shape 1 Wave Shape Oscillator Sub Oscillator for OSC1 To OSC2 Level OSC LEVEL Level Output Filter Balance Filter 1 Filter 2

5 OSC2,3 (Oscillator 2,3) Octave Semitone Finetune Pitch for OSC2 OSC Pitch Random Waveform Sawtooth Pulse Triangle Sine Noise FM Wave Form OSC2 OSC Wave Shape Wave Shape 1 Wave Shape Oscillator Sync OSC Sync From Another OSC for OSC2 To Another OSC OSC LEVEL Level Output Ring Mod. Filter Balance Filter 1 Filter 2

6 Filter 1,2 for Filter1 Filter 1 Filter 2 F1 to F2 Filter Type Filter 1 Filter 2 Filter Type Filter 1 Frequency Frequency Level Level Filter1 Frequency Frequency Filter2 for Filter1 Filter1 Resonance Resonance Filter2 AMP Filter1 Resonance Resonance Filter2 Filter1 Filter2 Saturator Saturator

7 Amplifier Filter for AMP AMP PAN Key AMP PAN AMP Keyboard Random AMP for AMP Saturator Drive VC Saturator EQ Lo Mid EQ Volume Hi L R

8 (Envelope Generator) KeyOn KeyOff Attack Level Delay Attack Hold Decay Sustain Release MONO Mode In Legato mode the envelope is not re-triggered if the new note is played "legato" (with the previous note still depressed). Specifies how keyboard tracking will modulate the parameter. Specifies how velocity will modulate the parameter.

9 (Low Frequency Oscillator) Specifies the frequency of the Specifies how envelope will modulate the waveshape. Specifies how envelope will modulate the speed. WAVEFORM / WAVE SHAPE Retrigger Resets the to its starting point on every new key-on Single Single cycle waveform without repeating ACCENT Cycle:1 / Ratio: 1:1 Specifies whether the envelope will modulate the output level. Cycle:2 / Ratio: 1:0 Cycle:2 / Ratio: 1:0.5 Cycle:2 / Ratio: 1:1 Cycle:2 / Ratio: 0.5:1 ELOPE AD AR Key Off Cycle:2 / Ratio: 0:1 Cycle:3 / Ratio: 1:0.5 Cycle:4 / Ratio: 1:0.5 Attack Decay Attack Release

10 Delay 1 (Modulation Delay) L R Send Feedback Filter Filter Delay Delay Time Time Delay 1 Delay 2 Modulation Dry/Wet Intensity Width L Speed R Speed

11 Delay 2 (Stereo Cross Delay) L R Send Filter Type Cutoff Filter Resonance Resonance Filter Filter Type Cutoff Intensity Intensity Delay 1 Delay 2 Phase Frequency Frequency Phase Delay Time Delay Delay Delay Time Feedback Feedback Dry/Wet L R

12 Arpeggiator Activate: activates the Arpeggiator. On/Off : turns each step on or off. The mode selector selects the arpeggio type. Octave Range: specifies the range of the arpeggio. The Pattern Editor is the place where you can program your arpeggio pattern. Pattern Length: specifies the number of steps. Gate Length: specifies the gate time of each note. Rate: specifies the duration of the steps.

13 Programmable Arpeggiator - Pattern Editor Step Number: selects the step to edit. Load patterns button Save patterns button The Note Order buttons specifies which of the pressed notes (counted from lowest) will be played. Example: When you press C,E,G keys, C is 1st note, E is 2nd note, G is 3rd note. On/Off: This is the same function as the On/Off buttons placed in the top of the GUI Octave: specifies the octave for a selected step. Accent: specifies the accent for a selected step. Gate Time: specifies the gate time for a selected step.

14 Global Polyphonic mode allows multiple notes to be played at once octave transpose pitch bend range in semitones Time Parameter to smoothly transition between pitches Remapping of incoming to outgoing MIDI notes Modulation Wheel Controller 1 Controller 2 Controller 3 Controller 4 CC1 CC16 CC17 CC18 CC19

15 Information & Settings MAXIMUM POLYPHONY Lower maximum polyphony setting will reduce the CPU usage. BUFFER SIZE The audio buffer size affects the amount of latency and the CPU usage. Higher setting will reduce clicking noise at high CPU usage, but also cause more latency. Lower setting will also improve the tempo stability of arpeggiator. MIDI IN CHANNEL When the OMNI is ON, the CASSINI will receive on all channels. When the OMNI is OFF, the CASSINI will receive only on the currently selected channel. BACKGROUND AUDIO If background audio is enabled, CASSINI will consume battery power significantly even if other apps are running or if your screen is turned off.