Date Stamps & Inserts
|
|
- Phoebe Bryan
- 6 years ago
- Views:
Transcription
1 Date Stamps & s
2 UY-UO-UOY-UOD-UOS-UOB-UOR Indexable date stamps at.: Acier inoxydable HRC :150 Remove inner insert from the outer insert using a screwdriver REF* REF REF REF REF REF REF D F 1 UY 04/200* UO 04 UOY 04/200* UOD 16 77, UOS 04 UOB 04 UOR ,4 1,6x0,2 UY 05/200* UO 05 UOY 05/200* UOD 20 83,71 UOS 05 UOB 05 UOR ,9 1,6x0,2 UY 06/200* UO 06 UOY 06/200* UOS 06 UOB 06 UOR ,7 1,6x0,2 UY 08/200* UO 08 UOY 08/200* UOS 08 UOB 08 UOR ,0 2,3x0,25 97,67 82,47 97,67 97,67 83,71 97,67 UY /200* UO UOY /200* UOS UOB UOR 6,3 2,5x0,35 UY /200* UO UOY /200* UOS UOB UOR 14 7,5 3x0,35 UY 16/200* UO 16 UOY 16/200* UOS 16 UOB 16 UOR ,0 4x0,35 UY 20/200* UO 20 UOY 20/200* UOS 20 UOB 20 UOR ,2 4x0,35 OUU-YUU Date stamps-inner inserts at.: Corrosion resistant steel: HRC REF REF* F l1 l2 l3 OUU 04 YUU 04/200* 2,4 1,5 4,5 7,7 OUU 05 YUU 05/200* 2,9 1,5 4,5 7,7 OUU 06 YUU 06/200* 3,7 1,5 4,5 7,7 OUU 08 YUU 08/200* 5,0 2,0 5,5 9,7 29,62 39,45 OUU YUU /200* 6,3 2,5 6,5 11,7 OUU YUU /200* 7,5 2,5 6,8 13,7 OUU 16 YUU 16/200* 11,0 2,5 6,8 13,7 OUU 20 YUU 20/200* 13,2 3,5 8,5 15,7
3 Date stamps at.: Corrosion resistant steel: HRC :150 ON-YN-OYN-YWN-ODN-OSN-AN-NZN-OBN-XXN Remove inner insert from the outer insert using a screwdriver h6 ± 0,03 only year year - week only day REF REF* REF REF* REF D 1 S ON 05 YN 05/200* OYN 05/6 YWN 05/200* ODN ,5 0,20 ON 06 YN 06/200* OYN 06/6 YWN 06/200* ODN ,5 0,20 ON 08 YN 08/200* OYN 08/6 YWN 08/200* ODN ,0 0,35 ON 31,71 YN /200* 88,79 OYN /6 88,79 YWN /200* ODN 72, ,0 0,35 ON YN /200* OYN /6 YWN /200* ODN ,0 0,50 ON 16 YN 16/200* OYN 16/6 YWN 16/200* ODN ,0 0,60 ON 20 YN 20/200* OYN 20/6 YWN 20/200* ODN ,0 0,60 only shift REF REF REF REF REF D 1 S OSN 05 AN 05 NZN 05 OBN 05 XXN ,5 0,20 OSN 06 AN 06 NZN 06 OBN 06 XXN ,5 0,20 OSN 08 AN 08 NZN 08 OBN 08 76,72 XXN ,0 0,35 Upon OSN 88,79 AN NZN 88,79 OBN XXN ,0 0,35 Request OSN AN NZN OBN XXN ,0 0,50 OSN 16 AN 16 NZN 16 OBN 16 XXN ,0 0,60 89,49 OSN 20 AN 20 NZN 20 OBN 20 XXN ,0 0,60 Date stamps-inner inserts at.: Corrosion resistant steel: HRC :150 OAN-YAN-OAS-YAS For for YWN and ODN for YWN and ODN REF REF* REF REF* 1 d1 K F 1 OAN 05 YAN 05/200* OAS 05 YAS 05/200* 1,6 x 0,2 3, OAN 06 YAN 06/200* OAS 06 YAS 06/200* 1,6 x 0,2 3, ,97 OAN 08 YAN 08/200* OAS 08 YAS 08/200* 2,5 x 0,35 4, OAN YAN /200* 28,44 OAS 39,45 YAS /200* 28,44 2,5 x 0,35 4, OAN YAN /200* OAS YAS /200* 3 x 0,50 6, OAN 16 39,45 YAN 16/200* OAS 16 YAS 16/200* 3,5 x 0,60 8, OAN 20 YAN 20/200* OAS 20 YAS 20/200* 3,5 x 0,60 11,
4 FO-FY-FOY-FYW-FOD-FOS-FA-FNZ-FOB-FXX Date stamps at.: Corrosion resistant steel: HRC :150 Remove inner insert from the outer insert using a screwdriver only month year - month only year year - week only day REF REF* REF REF* REF D S 1 FO 02,6 FY 02,6/200* FOY 02,6 2,6 4 0,2 0,8 x 0,2 FO 03 FY 03/200* FOY ,2 0,8 x 0,2 FO 04 FY 04/200* FOY ,2 1,1 x 0,25 FO 05 FY 05/200* FOY 05 FYW 05/200* FOD ,2 1,6 x 0,2 FO 06 FY 06/200* FOY 06 FYW 06/200* FOD ,2 1,6 x 0,2 47,37 73,99 47,37 FO 08 FY 08/200* FOY 08 FYW 08/200* FOD ,25 2,3 x 0,25 FO FY /200* FOY FYW /200* 73,99 FOD 63,73 0,35 2,3 x 0,25 FO FY /200* FOY FYW /200* FOD 14 0,35 3 x 0,35 FO 16 FY 16/200* FOY 16 FYW 16/200* FOD ,35 4 x 0,35 FO 20 FY 20/200* FOY 20 FO 20/200* FOD ,35 4 x 0,35 only shift A -> N -> Z only blank special -upon request REF REF REF REF REF D S 1 FOS 02,6 FA 02,6 FNZ 02,6 FOB 02,6 FXX 02,6 2,6 4 0,2 0,8 x 0,2 FOS 03 FA 03 FNZ 03 FOB 03 FXX ,2 0,8 x 0,2 FOS 04 FA 04 74,35 FNZ 04 FOB 04 FXX ,2 1,1 x 0,25 FOS 05 FA 05 FNZ 05 FOB 05 FXX ,2 1,6 x 0,2 FOS 06 FA 06 FNZ 06 FOB 06 FXX 06 Upon 6 8 0,2 1,6 x 0,2 63,73 73,99 63,91 FOS 08 FA 08 72,21 FNZ 08 FOB 08 FXX 08 Request 8 0,25 2,3 x 0,25 FOS FA FNZ FOB FXX 0,35 2,3 x 0,25 FOS FA FNZ FOB FXX 14 0,35 3 x 0,35 74,35 FOS 16 FA 16 FNZ 16 FOB 16 FXX ,35 4 x 0,35 FOS 20 FA 20 FNZ 20 FOB 20 FXX ,35 4 x 0,35
5 Date stamps-inner inserts at.: Corrosion resistant steel: HRC OON-YON-OOS-YOS For for YWN and ODN for YWN and ODN REF REF* REF REF* 1 d1 K F 1 OON 02,6 YON 02,6/200* 0,8 x 0,2 1,4 0,9 1,5 4 OON 03 YON 03/200* 0,8 x 0,2 1,5 0,9 1,5 4 OON 04 YON 04/200* 1,1 x 0,25 2,1 1,2 2,0 5 OON 05 YON 05/200* OOS 05 YOS 05/200* 1,6 x 0,2 3,1 2,0 3,0 8 OON 06 YON 06/200* OOS 06 YOS 06/200* 1,6 x 0,2 3,1 2,0 3,0 8,57 29,61 OON 08 YON 08/200* OOS 08 YOS 08/200* 2,3 x 0,25 4,4 2,5 4,0 OON YON /200* OOS 29,61 YOS /200* 29,61 2,5 x 0,35 5,2 3,0 4,5 OON YON /200* OOS YOS /200* 3 x 0,35 6,2 3,0 5,0 14 OON 16 YON 16/200* OOS 16 YOS 16/200* 4 x 0,35 8,2 3,5 5,0 14 OON 20 YON 20/200* OOS 20 YOS 20/200* 4 x 0, ,5 5,0 16 Date stamps-inner inserts at.: Corrosion resistant steel: HRC OON-YON REF REF* 1 d1 K F 1 OON 06 YON 06/200* 1,6 x 0,2 3,1 2,0 3,0 8 OON 08 YON 08/200* 2,3 x 0,25 4,4 2,5 4,0 OON,57 YON /200* 29,61 2,5 x 0,35 5,2 3,0 4,5 OON YON /200* 3 x 0,35 6,2 3,0 5,0 14 OON 16 YON 16/200* 4 x 0,35 8,2 3,5 5,0 14
6 IA SF - IA Inner inserts for FA SF - FA - FA at.: Stainless steel HRC :150 REF REF* d1 IA SF ,69 IA 3217/200* 3,2 17,0 IA SF ,55 IA 4717/200* 4,7 17,0 IA SF ,17 IA 5717/200* 5,7 17,0 IA SF ,17 IA 6717/200* 6,7 17,0 Upon request IA SF ,86 IA 8717/200* 8,7 17,0 IA SF 07 25,18 IA 07/200*,7 17,0 IA SF 2275 IA 2275/200* 2,2 7,5 Upon request IA SF 3075 IA 3075/200* 3,0 7,5 UY-UO-UOY-UOD-UOS-UOB-UOR-DSF Date stamps-inner inserts at.: Corrosion resistant steel: HRC 2 REF* REF REF REF* D F 1 REF 1 2 UY 04/200* UO 04 UOY 04/200* 4 8 2,4 1,6x0,2 DSF UY 05/200* UO 05 UOY 05/200* 5 8 2,9 1,6x0,2 DSF UY 06/200* UO 06 UOY 06/200* 6 8 3,7 1,6x0,2 DSF UY 08/200* UO 08 82,47 UOY 08/200* 8 5,0 2,3x0,25 DSF UY /200* 97,67 UO UOY /200* 97,67 6,3 2,5x0,35 DSF UY /200* UO UOY /200* 14 7,5 3x0,35 DSF UY 16/200* UO 16 UOY 16/200* UOD 16 77, ,0 4x0,35 DSF UY 20/200* UO 20 82,45 UOY 20/200* UOD 20 83, ,2 4x0,35 DSF REF REF REF D F 1 REF 1 2 UOS 04 UOB 04 UOR ,4 1,6x0,2 DSF UOS 05 UOB 05 UOR ,9 1,6x0,2 DSF UOS 06 UOB 06 UOR ,7 1,6x0,2 DSF UOS 08 UOB 08 UOR ,0 2,3x0,25 DSF UOS 97,67 UOB 83,71 UOR 97,67 6,3 2,5x0,35 DSF UOS UOB UOR 14 7,5 3x0,35 DSF UOS 16 UOB 16 UOR ,0 4x0,35 DSF UOS 20 UOB 20 UOR ,2 4x0,35 DSF
7 ultidater at.: Stainless steel HRC :150 D REF* D d1 d2 /2 D * 6 3,8 1,8 5 D * 8 5,3 2, D 200* 6,4 3,2 6 D * 16,5 5, Screwdriver set SCR 5 Set of 5 screw drivers Custom made for the complete DE range of date stamps Blades made of chrome-vanadium-molybdenum-steel fully hardened and chromium plated for precision and long life Ergonomic handle design Color coded pivot cap Extremely precise fit of the tip UY FY YN D 2x 1,1 x 0,20 x 60 Ø 2,6 Ø3 1x 1,6 x 0,15 x 60 Ø4 Ø4 Ø4 1x 2,3 x 0,20 x 60 Ø5 Ø6 Ø5 Ø6 Ø5 Ø6 Ø 1x 3,0 x 0,30 x 60 Ø8 Ø8 Ø8 Ø16 25
8 RI Recycling inserts at.: Stainless steel HRC REF A B d1 S RI 37,38 0,3,15 RI 16 32, ,3 6 9,83 RI 20 47, ,3 6,30 RE Recycling electrodes at.: Electrolitic copper E-Cu REF A B d1 S RE 54,39 0,5,15 RE 16 59, ,5 6 9,83 RE 20 72, ,5 6,30
9 Recycling inserts at.: Stainless steel HRC RI With these special inserts and electrodes plastic parts can be marked with useful information during the production process, usage and recycling process, e.g. with data on composition, recycling and purification. REF A B D S Identification RI-00 25,27 RI , ,3 6 Arrows only RI , RI-11 not hardened 17,73 RI-2202 not hardened 18, ,3 6 Blank RI-3303 not hardened 27, RI-01GE 26,93 RI-0201GE 31, ,3 6 Polyethylene terephthalate RI-0301GE 34, RI-02 20,22 RI , ,3 6 High density polyethylene RI , RI-02GE 23,63 RI-0202GE 29, ,3 6 High density polyethylene RI-0302GE 32, RI-03GE 25,27 RI-0203GE 27, ,3 6 Polyvinyl chloride RI-0303GE 34, RI-04 22,17 RI , ,3 6 ow density polyethylene RI , RI-04GE 28,74 RI-0204GE 27, ,3 6 ow density polyethylene RI-0304GE 38, RI-04FR 28,74 RI-0204FR 31, ,3 6 ow density polyethylene RI-0304FR 29, RI-05 15,43 RI , ,3 6 Polypropylene RI , RI-06 19,81 RI , ,3 6 Polystyrene RI , RI-07 25,27 RI , ,3 6 All other resins RI , RI-07GE 28,74 RI-0207GE 25, ,3 6 All other resins RI-0307GE 32, RI-0 37,38,15 RI , ,3 6 9,83 Food RI , ,3 PE HDPE PE-HD PVC DPE PE-D PE-BD PP PS Other O
10 RE Recycling electrodes at.: Electrolitic copper E-Cu With these special inserts and electrodes plastic parts can be marked with useful information during the production process, usage and recycling process, e.g. with data on composition, recycling and purification. REF A B D S Identification RE-00 54,39 RE , ,3 6 Arrows only RE , RE-01GE 53,94 RE-0201GE 72, ,3 6 Polyethylene terephthalate RE-0301GE 72, RE-02 54,39 RE , ,3 6 High density polyethylene RE , RE-02GE 53,94 RE-0202GE 72, ,3 6 High density polyethylene RE-0302GE 60, RE-03GE 58,26 RE-0203GE 72, ,3 6 Polyvinyl chloride RE-0303GE 82, RE-04 54,38 RE , ,3 6 ow density polyethylene RE , RE-04GE 20,32 RE-0204GE 72, ,3 6 ow density polyethylene RE-0304GE 82, RE-04FR 58 RE-0204FR 72, ,3 6 ow density polyethylene RE-0304FR 82, RE-05 54,39 RE ,3 6 Polypropylene RE , RE-06 54,39 RE , ,3 6 Polystyrene RE , RE-07 40,65 RE , ,3 6 All other resins RE , RE-07GE 53,94 RE-0207GE 63, ,3 6 All other resins RE-0307GE 82, RE-0 54,39,15 RE , ,3 6 9,83 Food RE , ,3 PE HDPE PE-HD PVC DPE PE-D PE-BD PP PS Other O
11 Snap-in-place Date stamp at.: Stainless steel HRC DAO - DAOY - DAY indexable date stamp with Snap-in-place positioning insert remains flush when rotated high quality - best price easy adjustment/removal current year + 9 additional years one piece construction. insert not replaceable l 1 x 45 D d D -0,1 CuSn CuSn onth Year Year / onth REF Dm6 +/ d l+/- 0.5 REF Dm6 +/ d l+/- 0.5 REF Dm6 +/ d l+/- 0.5 DAO DAOY04* DAY04* DAO DAO DAO ,31 DAO DAO DAOY05* DAOY06* DAOY08* ,31 DAOY* DAOY* DAY05* DAY06* DAY08* ,31 DAY* DAY* DAO DAO DAOY16* DAY16* DAOY20* DAY20* * year * year A P: F: dme_oesterreich@milacron.com BE P: +32 (0) F: +32 (0) dme_benelux@milacron.com CH P: F: dme_schweiz@milacron.com CZ P: F: dme_cz@milacron.com DE P: (0) F: (0) dme_normalien@milacron.com ES P: F: dme_iberia@milacron.com FR P: F: dme_france@milacron.com HU P: F: dme_hungary@milacron.com I P: F: dme_italy@milacron.com N P: +31 (0) F: +31 (0) dme_benelux@milacron.com P P: F: dme_polska@milacron.com P P: F: dme_iberia@milacron.com SK P: F: dme_cz@milacron.com UK P: F: dme_uk@milacron.com Other Countries P: F: dme_export@milacron.com
12 A body l Short version with retaining thread Spring l Body hread g k ØDH7 Front-removable inner insert Press-fit for installation in the mold Other material upon request insert at.: , hardened l Adjustment urn inner insert counter-clockwise. When correctly used the inner insert (e.g. date stamp with D=6mm) will be max. 0,1mm lower or higher with the top of the body. D SW d 1,5 2,1 3,1 3,1 4,4 5,2 6,2 k 0,9 1,2 2,0 2,0 2,5 3,0 3,0 l 3,8 4,7 7,8 7,8 9,8 11,8 13,8 g 0,8x0,2 1,1x0,25 1,6x0,2 1,6x0,2 2,3x0,252,5x0,35 3x0,35 a 0,3 0,3 0,4 0,4 0,4 0,4 0,6 Removal Remove inner insert by turning it counter-clockwise and insert new inner insert by turning it clockwise B Short version, front-removable Ressort Corps Filetage g ête de vis SW k ØDH7 Adjustment urn inner insert counter-clockwise. When correctly used the inner insert (e.g. date stamp with D=6mm) will be max. 0,1mm lower or higher with the top of the body. Front-removable hreaded pin for installation in the mold Other material upon request body insert at.: , hardened D SW 0,7 0,9 0,9 1,5 1,5 1,5 d 2,1 3,1 3,1 4,4 5,2 6,2 k 1,2 2,0 2,0 2,5 3,0 3,0 l 4,7 7,8 7,8 9,8 11,8 13,8 g 1,1x0,25 1,6x0,2 1,6x0,2 2,3x0,25 2,5x0,35 3x0,35 a 0,3 0,4 0,4 0,4 0,4 0,6 Removal Remove inner insert by turning it counter-clockwise and insert new inner insert by turning it clockwise C ong version, front-removable Spring Body hread g Screw key width SW k ØDH7 Adjustment urn inner insert counter-clockwise. When correctly used the inner insert (e.g. date stamp with D=6mm) will be max. 0,1mm lower or higher with the top of the body. Front-removable hreaded pin for installation in the mold Other material upon request body insert at.: , hardened D SW 0,7 0,9 0,9 1,5 1,5 d 2,5 3,1 3,1 4,6 4,6 k 2,3 2,8 2,8 4,0 4,0 l,5 13,0 13,0 14,0 14,0 g 1,4x0,2 1,6x0,2 1,6x0,2 2,5x0,35 2,5x0,35 a 0,3 0,4 0,4 0,4 0,4 Removal Remove inner insert by turning it counter-clockwise and insert new inner insert by turning it clockwise. a=deptharrow
13 F K 2 1 l k Standard ØD 1 Spring hread g Core pin Front-removable inner insert Core pins from 0 5 mm and ength up to 350 mm core pin D max 350 max 350 max 350 max 350 max 350 max 350 D K ength = up to 350mm (specify please) insert d 3,1 3,1 4,6 4,6 6,4 8,4 k 2,8 2, l g 1,6x0,2 1,6x0,2 2,5x0,352,5x0,35 3x0,5 3x0,5 a 0,4 0,4 0,4 0,4 0,6 0,6 D2 D OHV (Ø 5/6/8//) insert remains flush Body Installation and adjustment Adjust to required position. When insert locks into postion, turn it ca. 3 turns to the left. => is lifted. hen turn insert ca. 90 to the right and push back into the mold. => insert is flush. Especially suited for thin-walled parts or low viscosity materials (such as rubber, etc... ) Front-removable inner insert heat-resistant up to 200 C hreaded pin for installation in the mold Other material upon request at.: , hardened D d a 0,4 0,4 0,4 0,4 0,6 Removal Fully turn inner insert clockwise. hen turn the inner insert counter-clockwise until it can be removed. Install the new inner insert by turning it left to right under slight pressure E OHV ount with hex-key (Ø 5/6/8//) insert remains flush Screw key width SW Body hreaded pin Installation and adjustment ount outer sleeve with hex-key from mold side Install the new inner insert by turning it left to right under slight pressure and turn to required position. When insert locks into postion, turn it ca. 3 turns to the left. => is lifted. hen turn insert ca. 90 to the right and push back into the mold. => insert is flush. ca. 6 Especially suited for thin-walled parts or low viscosity materials (such as rubber, etc... ) Front-removable heat-resistant up to 200 C hreaded pin for installation in the mold Other material upon request at.: , hardened D SW d a 0,4 0,4 0,4 0,4 0,6 Removal Fully turn inner insert clockwise. hen turn the inner insert counter-clockwise until it can be removed. Install the new inner insert by turning it left to right under slight pressure
14 G OHV (Ø 3/4) insert remains flush ØDg6 component H +/-0,05 Front-removable heat-resistant up to 200 C hreaded pin for installation in the mold Other material upon request D Installation and adjustment Install component. Install the new inner insert by turning it left to right under slight pressure and turn to required position. (ip: Add chamfer to mold plate, sharp edge risks damaging) When insert locks into postion, turn it ca. 3 turns to the left. => is lifted. hen turn insert ca. 90 to the right and push back into the mold. => insert is flush Removal Fully turn inner insert clockwise. hen turn the inner insert counter-clockwise until it can be removed. Install the new inner insert by turning it left to right under slight pressure I OHV ount with hex-key (Ø 3/4) front-removable insert remains flush Screw key width SW component with inner hexagon ØDg6 H +/-0,05 Front-removable heat-resistant up to 200 C hreaded pin for installation in the mold Other material upon request D SW 2 3 ca. 5 hreaded pin 2 Installation and adjustment Install component. Install the new inner insert by turning it left to right under slight pressure and turn to required position. (ip: Add chamfer to mold plate, sharp edge risks damaging) When insert locks into postion, turn it ca. 3 turns to the left. => is lifted. hen turn insert ca. 90 to the right and push back into the mold. => insert is flush Removal Fully turn inner insert clockwise. hen turn the inner insert counter-clockwise until it can be removed. Install the new inner insert by turning it left to right under slight pressure
15 K OHV Standard insert remains flush ØDg6 Front-removable heat-resistant up to 200 C Other material upon request D OHV Short version insert remains flush ØDg6 Front-removable heat-resistant up to 200 C Other material upon request D SE 630 Hexagon socket screw key REF S SE 630 0,7 0,7 SE 630 0,9 0,9 SE 630 1,5 1,5 SE ,0 SE ,0 SE ,0
16 I VWXYZNOPQRSU HIJKABCDEFG SABS-PC l l l A - B - C Date stamps Standard version Short version, front-removable ong version, front-removable ØDH7 ØDH7 Spring Body hread g k ØDH7 Ressort Corps Filetage g ête de vis SW k Spring Body hread g Screw key width SW k at.: , hardened at.: , hardened at.: , hardened D D D REF Description REF Description REF Description (Dezember 2009) AA (D) / 1- / month + year BA (D) / 1- / month + year CA (D) / 1- / month + year (Dezember) (2009) (2009) AB (D) / 1- month BB (D) / 1- month CB (D) / 1- month AC (D) / / +5 6 years (year + 5) AD (D) / ( year) / +11 AE (D) / SE1 / 20 AF (D) / SE2 / AG (D) / SE3 / years (year + 11) set 1: weeks + years set 2: set (the month insert should be replaced monthly) set 3: date set BC (D) / / +5 BD (D) / ( year) / +11 BE (D) / SE1 / BF (D) / SE2 / BG (D) / SE3 / 6 years (year + 5) CC (D) / / +5 6 years (year + 5) years (year + 11) set 1: weeks + years set 2: set (the month insert should be replaced monthly) set 3: date set CD (D) / ( year) / +11 CE (D) / SE1 / CF (D) / SE2 / CG (D) / SE3 / years (year + 11) set 1: weeks + years set 2: set (the month insert should be replaced monthly) set 3: date set II III AH (D) / 1-3 shift BH (D) / 1-3 shift CH (D) / 1-3 shift AI (D) / 1-4/ quarter + year BI (D) / 1-4/ quarter + year CI (D) / 1-4/ quarter + year AJ (D) / A- A- BJ (D) / A- A- CJ (D) / A- A- AK (D) / N-Z N-Z BK (D) / N-Z N-Z CK (D) / N-Z N-Z ABS B A (D) / (custom custom (include drawing) B (D) / (custom) custom (include drawing) C (D) / (custom) custom (include drawing) A (D) / 1-31 days B (D) / 1-31 days C (D) / 1-31 days (ag 30) AN (D) blank BN (D) blank CN (D) blank 1 5 (z.b. 11 = 2011) AO (D) / year year + arrow AO (D) / year year + arrow CO (D) / year year + arrow AP (D) arrow AP (D) arrow CP (D) arrow x x AQ (D) / (custom) number/letter according to customer specification (max. 2 characters) AQ (D) / (custom) number/letter according to customer specification (max. 2 characters) CQ (D) / (Gew. Gravur) number/letter according to customer specification (max. 2 characters)
17 I VWXYZNOPQRSU HIJKABCDEFG SABS-PC Date stamps insert remains flush D - E remains flush (0 5/6/8//) remains flush, mount with hex-key (0 5/6/8//) Body at.: , hardened Screw key width SW Body hreaded pin at.: , hardened ca. 6 D D REF Description REF Description (Dezember 2009) DA (D) / 1- / month + year EA (D) / 1- / month + year DB (D) / 1- month EB (D) / 1- month (2009) (2009) 11 DC (D) / / +5 6 years (year + 5) EC (D) / / +5 6 years (year + 5) DD (D) / ( year) / +11 years (year + 11) ED (D) / ( year) / +11 years (year + 11) DE (D) / SE1 / set 1: weeks + years EE (D) / SE1 / set 1: weeks + years DF (D) / SE2 / set 2: set (the month insert should be replaced monthly) EF (D) / SE2 / set 2: set (the month insert should be replaced monthly) DG (D) / SE3 / set 3: date set EG (D) / SE3 / set 3: date set II III DH (D) / 1-3 shift EH (D) / 1-3 shift DI (D) / 1-4/ quarter + year EI (D) / 1-4/ quarter + year DJ (D) / A- A- EJ (D) / A- A- DK (D) / N-Z N-Z EK (D) / N-Z N-Z ABS B D (D) / (custom) custom (include drawing) E (D) / (custom) custom (include drawing) D (D) / 1-31 days E (D) / 1-31 days (ag 30) DN (D) blank EN (D) blank 1 5 (z.b. 11 = 2011) DO (D) / year year + arrow DO (D) / year year + arrow DP (D) arrow DP (D) arrow x x (xx) DQ (D) / (custom) number/letter according to customer specification (max. 2 characters) DQ (D) / (custom) number/letter according to customer specification (max. 2 characters)
18 I VWXYZNOPQRSU HIJKABCDEFG SABS-PC F Date pin at.: Standard Front-removable inner insert Core pin 0 5 mm and length up to 350 mm Core pin hread g Spring ØD 1 D2 l k K 2 ength = up 1 to 350mm (specify please) D max. 350 max. 350 max. 350 max. 350 max. 350 max (Dezember 2009) (Dezember) REF FA (D 1 ) / 1- / FB (D 1 ) / 1- Description month + year month (2009) (2009) 11 FC (D 1 ) / / +5 6 years (year + 5) FD (D 1 ) / ( year) / +11 years (year + 11) FE (D 1 ) / SE1 / set 1: weeks + years FF (D 1 ) / SE2 / set 2: set (the month insert should be replaced monthly) FG (D 1 ) / SE3 / set 3: date set II III FH (D 1 ) / 1-3 shift FI (D 1 ) / 1-4/ quarter + year FJ (D 1 ) / A- A- FK (D 1 ) / N-Z N-Z ABS B F (D 1 ) / (custom) custom (include drawing) (ag 30) F (D 1 ) / 1-31 days FN (D 1 ) blank 1 5 (z.b. 11 = 2011) CO (D 1 ) / year year + arrow x x CP (D 1 ) CQ (D 1 ) / (custom) arrow number/letter according to customer specification (max. 2 characters)
19 Date stamp insert remains flush at.: G - E remains flush when rotated (0 3/4) Front-removable inner insert heat-resistant up to 200 C hreaded pin for installation in the mold ØDg6 REF Description GA (D) / 1- / month + year HA GB (D))/ 1- month HB H GC (D) / / +34 years (year + 3) HC component +/-0,05 GD (D) / A-F A-F HD D E electrode - Date stamp, mount with hex-key, insert remains flush at.: I - E remains flush (0 3/4) front-removable Front-removable inner insert heat-resistant up to 200 C hreaded pin for installation in the mold REF Description IA (D) / 1- / month + year HA IB (D) / 1- month HB ØDg IC (D) / / +5 4 years (year + 3) HC D Screw key width SW component with inner hexagon hreaded pin 2 H +/-0,05 ID (D) / ( year) / +11 A-F E electrode - HD ca. 5 Date stamp insert remains flush at.: Standard Front-removable inner insert heat-resistant up to 200 C K - E REF Description KA (D) / 1- / month + year ØDg6 KB (D) / 1- month D E electrode Date stamp insert remains flush at.: E Short version Front-removable inner insert heat-resistant up to 200 C REF Description A (D) / 1- / month + year ØDg6 B (D) / 1- month D E electrode
UYM-UOM-UOY-UOD- UOS-UOB-UOR
UY-UO-UOY-UOD- UOS-UOB-UOR Indexable date stamps at.: Acier inoxydable 5-55 HRC :15 Remove inner insert from the outer insert using a screwdriver REF* REF REF REF REF REF REF D F 1 UY 4/2* UO 4 UOY 4/2*
More informationSPARE CONNECTORS KTM 2014
SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3208201EN CONTENT CONNECTORS FOR WIRING HARNESS AA-AN CONNECTORS FOR WIRING HARNESS AO-BC CONNECTORS FOR WIRING HARNESS BD-BQ CONNECTORS FOR WIRING HARNESS BR-CD
More informationSPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN
SPAREPARTSCATALOG: CONNECTORS ART.-NR.: 3CM3208201EN CONTENT SPARE CONNECTORS AA-AN SPARE CONNECTORS AO-BC SPARE CONNECTORS BD-BQ SPARE CONNECTORS BR-CD 3 4 5 6 SPARE CONNECTORS CE-CR SPARE CONNECTORS
More information2-Type Series Pressurized Closures
2-Type Series Pressurized Closures A complete pressure tight reenterable closure system for enclosing spliced connections of communications cables in a wide variety of applications. The 2-type Closure
More information22ND CENTURY_J1.xls Government Site Hourly Rate
Escalation rate 000 AA0 Administrative Assistant Level I 000 AA0 Administrative Assistant Level II 000 AB0 Application Engineer Level I 000 AB0 Application Engineer Level II 000 AC0 Application Programmer
More informationAppendix 5-1: Attachment J.1 Pricing Table -1: IMS Ceiling Loaded Rates at Contractor Site
Appendix 5-1: Attachment J.1 Pricing Table -1: IMS Ceiling Loaded Rates at Contractor Site Escalation rate 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 0001 AA01 Administrative Assistant Level I $51.00
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/128D 18 April 2013 SUPERSEDING MIL-DTL-55302/128D 4 June 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, DOUBLE ROW, 4 THROUGH
More informationCIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1
Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. NOTE: Router E should only be used for Internet traffic. Router A Router
More information4. Specifications and Additional Information
4. Specifications and Additional Information AGX52004-1.0 8B/10B Code This section provides information about the data and control codes for Arria GX devices. Code Notation The 8B/10B data and control
More informationW52P1J-15-D-0060 [ ] Honeywell CN70GQ5KN00G1A40
AMIS AIT-V Contract Products Snapshot This AIT-V Contract Products Snapshot is an abbreviated presentation of the product offerings by the three contractors providing their products and services. All CLINS
More informationCIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1
Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. Router A Router B Router C Router D Network Next Hop Next Hop Next Hop Next
More informationCIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1
Version 1 1. (20 Points) Given the class A network address 117.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 4,000 subnets? b. (5 Points) What is
More informationCIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1
Version 1 Instructions Write your name on the exam paper. Write your name and version number on the top of the yellow paper. Answer Question 1 on the exam paper. Answer Questions 2-4 on the yellow paper.
More informationOPAL-RT FIU User Guide.
OPAL-RT FIU User Guide www.opal-rt.com Published by Opal-RT Technologies, Inc. 1751 Richardson, suite 2525 Montreal, Quebec, Canada H3K 1G6 www.opal-rt.com 2013 Opal-RT Technologies, Inc. All rights reserved
More informationCIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1
Version 1 1. (20 Points) Given the class A network address 119.0.0.0 will be divided into a maximum of 15,900 subnets. a. (5 Points) How many bits will be necessary to address the 15,900 subnets? b. (5
More informationGateway Ascii Command Protocol
Gateway Ascii Command Protocol Table Of Contents Introduction....2 Ascii Commands.....3 Messages Received From The Gateway....3 Button Down Message.....3 Button Up Message....3 Button Maintain Message....4
More informationJuly Registration of a Cyrillic Character Set. Status of this Memo
Network Working Group Request for Comments: 1489 A. Chernov RELCOM Development Team July 1993 Status of this Memo Registration of a Cyrillic Character Set This memo provides information for the Internet
More informationCIS-331 Exam 2 Spring 2016 Total of 110 Points Version 1
Version 1 1. (20 Points) Given the class A network address 121.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 8,100 subnets? b. (5 Points) What is
More informationExcerpt from the full range of SIRIUS ACT Push Buttons and Indicator Lights siemens.com/sirius-act
SIRIUS ACT Core spectrum selection guide Excerpt from the full range of SIRIUS ACT Push Buttons and Indicator Lights siemens.com/sirius-act SIRIUS ACT commanding and signaling SIRIUS ACT modern, high-performance
More informationC1098 JPEG Module User Manual
C1098 JPEG Module User Manual General Description C1098 is VGA camera module performs as a JPEG compressed still camera that can be attached to a wireless or PDA host. Users can send out a snapshot command
More informationIEC Contactors. Auxiliary Contact Blocks GENERAL
IEC Contactors Auxiliary Contact Blocks GENERAL Description 3RH19 Auxiliary contact blocks The 3RH19 auxiliary contact blocks are available in 1, 2, 3 and 4-pole front mount versions and 2-pole side mount
More informationhttps://support.industry.siemens.com/cs/ww/en/view/
Support Packages for TIA Portal V13 March 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The general
More informationSIMATIC S plus TIA Portal
Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of
More informationThe cache is 4-way set associative, with 4-byte blocks, and 16 total lines
Sample Problem 1 Assume the following memory setup: Virtual addresses are 20 bits wide Physical addresses are 15 bits wide The page size if 1KB (2 10 bytes) The TLB is 2-way set associative, with 8 total
More informationFirst Data Dual Interface EMV Test Card Set. Version 1.20
First Data Dual Interface EMV Test Card Set August, 2016 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available
More informationCIS-331 Final Exam Spring 2018 Total of 120 Points. Version 1
Version 1 Instructions 1. Write your name and version number on the top of the yellow paper and the routing tables sheet. 2. Answer Question 2 on the routing tables sheet. 3. Answer Questions 1, 3, 4,
More informationZN-DN312XE-M Quick User Guide
ZN-DN312XE-M Quick User Guide This manual provides instructions for quick installation and basic configuration of your IP device. Step1. Connect cables to IP device Connect required cables to the device
More informationCIS-331 Final Exam Spring 2015 Total of 115 Points. Version 1
Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present
More informationFirst Data EMV Test Card Set. Version 1.30
First Data EMV Test Card Set.30 January, 2018 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available from industry
More informationParts List, Charging Chart, Wiring Diagrams
Parts List, Charging Chart, Wiring Diagrams PHH150, PHH180 3 Phase PACKAGE HEAT PUMP UNITS TABLE OF CONTENTS PARTS LIST------------ 2-5 PARTS DRAWING - - - - - - -6-16 CHARGING CHARTS - - - - - - - 17
More informationFirst Data EMV Test Card Set. Version 2.00
First Data EMV Test Card Set.00 February, 2018 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available from industry
More informationAcquirer JCB EMV Test Card Set
Acquirer JCB EMV Test Card Set July, 2017 Powered by Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available
More informationECHO Process Instrumentation, Inc. Modbus RS485 Module. Operating Instructions. Version 1.0 June 2010
ECHO Process Instrumentation, Inc. Modbus RS485 Module Operating Instructions Version 1.0 June 2010 ECHO Process Instrumentation, Inc. PO Box 800 Shalimar, FL 32579 PH: 850-609-1300 FX: 850-651-4777 EM:
More informationDBK24. Isolated Digital Output Chassis. Overview
DBK24 Isolated Digital Output Chassis Overview 1 Power Requirements 2 Hardware Setup 2 Card Connection 2 Card Configuration 3 DaqBook and DaqBoard Connection 4 DaqBoard/2000 Series Board Connection 5 DaqBook
More informationFTA1000 Cameras, Optics and Illuminators
FTA1000 Cameras, Optics and Illuminators November 2, 2006 1. Introduction This note will show you how to choose the optical path, the camera, microscope, and backlight illuminator, for your FTA1000 system.
More informationAPPLESHARE PC UPDATE INTERNATIONAL SUPPORT IN APPLESHARE PC
APPLESHARE PC UPDATE INTERNATIONAL SUPPORT IN APPLESHARE PC This update to the AppleShare PC User's Guide discusses AppleShare PC support for the use of international character sets, paper sizes, and date
More informationA. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.
ENDURA EE500 SERIES ENDURAXPRESS TECHNICAL SPECIFICATIONS SECURITY SYSTEM DIVISION 28 ELECTRONIC SAFETY AND SECURITY LEVEL 1_28 20 00 ELECTRONIC SURVEILLANCE LEVEL 2_28 23 00 VIDEO SURVEILLANCE LEVEL 3_28
More information2D Transformations. 7 February 2017 Week 5-2D Transformations 1
2D Transformations 7 Februar 27 Week 5-2D Transformations Matri math Is there a difference between possible representations? a c b e d f ae bf ce df a c b d e f ae cf be df a b c d e f ae bf ce df 7 Februar
More informationConstruction. Quality Products. Service Excellence.
1485 Series - NEMA 12 www.hammondmfg.com Application Designed to enclose and protect electrical wiring from dirt, dust, oil and water. All sections and fi ttings are completely open on each side to allow
More information!!!"#$%&%#'"()*+!,&()*,
-,.%'/,012)301#0)43(/15641.,/1'3##)0/15/!!!"#$%&%#'"()*+!,&()*, 78991',0%,'1:*50/1;? @ABC;789D @DBC;789D !"#$% 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 2 2.1."@)+..$ *%+/#$..& 6 2.2 2.3 2.4 2.5 2.6
More informationFirst Data DCC Test Card Set. Version 1.30
First Data DCC Test Card Set.30 April, 2018 Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information available from industry
More informationOne subset of FEAL, called FEAL-NX, is N round FEAL using a 128-bit key without key parity.
FEAL-NX SPECIFICATIONS 1 Introduction 1.1 Outline of the FEAL-NX cipher FEAL, the Fast Data Encipherment Algorithm, is a 64-bit block cipher algorithm that enciphers 64-bit plaintexts into 64-bit ciphertexts
More informationAcquirer JCB Dual Interface EMV Test Card Set
Acquirer JCB Dual Interface EMV Test Card Set.00 July, 2018 Powered by Disclaimer Information provided in this document describes capabilities available at the time of developing and delivering this document
More informationTEST DVD-VIDEO/ DVD-ROM For Checking DVD Players, DVD Recorders and DVD Drives TDH-940
TEST DVD-VIDEO/ DVD-ROM For Checking DVD Players, DVD Recorders and DVD Drives TDH-940 Product Introduction. Purpose of use, Features TDH-940 is a Test Disc designed for confirmation of operation of DVD
More informationLimit Switches and Safety
Limit Switches and Safety Introduction Contents Pages 3SE International (IEC) Limit Switches 3SE5 General data Overview......................................... 13/4-13/9 3SE5 plastic enclosures 3SE5,
More informationHow Computers Work. Processor and Main Memory. Roger Young
How Computers Work Processor and Main Memory Roger Young Copyright 2001, Roger Stephen Young All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted by
More informationhttps://support.industry.siemens.com/cs/ww/en/view/
Support Packages for TIA Portal V14 February 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The
More informationIndustrial Wireway & Trough
308 Lay-In Wireway 1485 Series - NEMA 12... 310-319 Wiring Trough 1486 Series - NEMA 12... 320 Pull Through Wireway 1487 Series - NEMA 12... 322-328 309 1485 Series Lay-In Wireway - NEMA 12 Lay-In Wireway
More informationBẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT
BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/2011 - Giá chưa bao gồm thuế VAT NO I SIMATIC S7-300 Central Processing Unit 1 6ES7312-1AE13-0AB0 SIMATIC S7-300, CPU 312 CPU WITH MPI INTERFACE, INTEGRATED
More informationLimit Switches and Safety
Industrial Controls Product Catalog 217 Section contents 3SE International (IEC) 3SE5 General data Overview /4 - /9 3SE5 plastic enclosures Plastic, 31 mm Plastic, 5 mm 3SE5, selection and ordering data,
More information6.1 Font Types. Font Types
6 Font This chapter explains basic features of GP-Pro EX's "Font" and basic ways of placing text with each font. Please start by reading "6.1 Font Types" (page 6-2) and then turn to the corresponding page.
More information6. Specifications & Additional Information
6. Specifications & Additional Information SIIGX52004-3.1 Transceier Blocks Table 6 1 shows the transceier blocks for Stratix II GX and Stratix GX deices and compares their features. Table 6 1. Stratix
More informationTrio Application Control System Instruction Sheet
Trio Application Control System Instruction Sheet P/N 7580708_01 CAUTION The procedures detailed within this guide should only be performed by trained Nordson personnel or by persons cleared to do so by
More informationDigital Projector X30N/X35N
Digital Projector X30N/X35N Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily
More informationBEC Machine Products 171 Ruth Rd Harleysville, Pa T. (215) F: (215) E:
1 BEC Machine Products BEC Machine Products 171 Ruth Rd Harleysville, Pa. 19438 T. (215) 256-3100 F: (215) 256-3108 E: info@becmachine.com GOVERNMENT/CUSTOMER DRAWING / SPEC BEC PT# NATIONAL STOCK NUMBER#
More informationPushbutton Units and Indicator Lights
SIGNUM 3S3 Introduction Overview SIGNUM is a range of plastic and metal control devices for frontplate mounting and rear wire connection. SIGNUM is of modern industrial design with a very construction
More information1953LCV1. Laser Chip. KeyFeatures. Applications. For moreinfo. Laser Chip on Submount 1064 CHP
Chip 1064 CHP KeyFeatures Distributed Feed Back (DFB) Laser InGaAsP Strained Quantum Well Laser Structure on InP Buried Ridge Stripe (BRS) Low Beam Divergence (FWHM) of 25 x 25 Output Power: 20mW, 40mW
More informationTriple DES and AES 192/256 Implementation Notes
Triple DES and AES 192/256 Implementation Notes Sample Password-to-Key and KeyChange results of Triple DES and AES 192/256 implementation For InterWorking Labs customers who require detailed information
More informationPCL ISO 8859/5 Latin/Cyrillic
Page 1 of 5 PCL Symbol Se t: 10N Unicode gly ph correspondence tables. Contact:help@redtitan.com http://pcl.to $20 U0020 Space -- -- -- -- $21 U0021 Ê Exclamation mark -- -- -- -- $22 U0022 Ë Quotation
More informationDigital Lighting Systems, Inc.
Digital Lighting Systems, Inc. Four Channel Dry Contacts Relays Switch Pack DMX512 compatible USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION The is a 4-channel DMX-512 compatible electro-mechanical
More informationSecret Key Systems (block encoding) Encrypting a small block of text (say 64 bits) General considerations for cipher design:
Secret Key Systems (block encoding) Encrypting a small block of text (say 64 bits) General considerations for cipher design: Secret Key Systems (block encoding) Encrypting a small block of text (say 64
More informationDigital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack
Digital Lighting Systems, Inc. PD405DMX Four Channel Dimmer and Switch Packs DMX52 compatible PD405DMX24DC DMX52 4 x 5 Amps Dimmer Pack C UL US LISTED www.digitallighting.com Digital Lighting Systems,
More informationProgramming Notes and Examples
LCD/USB Companion Chip Document Number: X37A-G-003-05 Copyright 2001, 2002 Epson Research and Development, Inc. All Rights Reserved. Information in this document is subject to change without notice. You
More informationBOOK-IT 8.0. SIP2 implementation in the Z39.70 server
BOOK-IT 8.0 2015-07-29 Axiell Sverige AB, Box 24014, 224 21 LUND. Besöksadress: Fältspatsvägen 4, 224 78 LUND Tel 046-270 04 00, e-post: axiellsverige@axiell.com, www.axiell.se Table of contents 1 Introduction...
More informationCP-D10. User's Manual (detailed) Operating Guide Technical. Example of PC signal. Projector
Projector CP-D10 User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480
More informationProximity sensors, block design
Proximity sensors, block design Proximity sensors, block design Product range overview Measuring principle Version Type Mounting Switching element function Switching Electrical connection N/O contact N/C
More informationInterac USA Interoperability EMV Test Card Set
Interac USA Interoperability EMV Test Card Set.00 April, 2018 Powered by Disclaimer Information provided in this document describes capabilities available at the time of developing this document and information
More informationSpecifcations. Highlights - Rilled cans withstand high shock and vibration. - 2 times the ripple-current capability - High capacitance per can
click here to see hardware and mounting options Type 388 85 C Best Value, Screw Terminal, Aluminum Type 388 has twice the life of the 386 and twice the ripple-current capability. While the standard encasement
More informationVM7000A PAPERLESS RECORDER COMMUNICATION FUNCTION OPERATION MANUAL
VM7000A PAPERLESS RECORDER COMMUNICATION FUNCTION OPERATION MANUAL WXPVM70mnA0002E October, 2009(Rev.1) All Rights Reserved, Copyright 2009, Ohkura Electric Co.,Ltd. To use this equipment safely Thank
More informationDigital Lighting Systems, Inc.
, Inc. PD402-DMX Four Channel Dimmer and Switch Packs 4 x 2.5 Amps @ 6VDC to 24 VDC DMX52 compatible DMX52 4 x 2.5 Amps Dimmer Pack C UL US LISTED Digital Lighting Systems, Inc. USER'S MANUAL User's Manual
More information10. RS-232C communication
10. RS-232C communication PB9200(P5XMLA) Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer
More informationCDR File Information. Comments Direct PCM
IMPORTANT NOTICE: Robert Bosch LLC and the manufacturers whose vehicles are accessible using the CDR System urge end users to use the latest production release of the Crash Data Retrieval system software
More informationTerminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
More informationDigital Lighting Systems, Inc. CD400-DMX DMX512 Four Channel Dimmer and Switch module
, Inc. DMX512 Four Channel Dimmer and Switch module Input: 5 Amps @ 6-24 VDC Outputs: 5 Amps Maximum each, total 4 outputs 8 Amps Maximum. FRONT BACK USER'S MANUAL -UM User's Manual - Page 1 GENERAL DESCRIPTION
More informationCP-X253. User's Manual (detailed) Technical. Example of PC signal. Projector
Projector CP-X253 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA
More informationCIS-331 Final Exam Spring 2016 Total of 120 Points. Version 1
Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present
More informationFundamentals of Cryptography
Fundamentals of Cryptography Topics in Quantum-Safe Cryptography June 23, 2016 Part III Data Encryption Standard The Feistel network design m m 0 m 1 f k 1 1 m m 1 2 f k 2 2 DES uses a Feistel network
More informationPRESENTS: Ap.LCase. App!e PugetSound Program Library Exchange
PRESENTS: Ap.LCase App!e PugetSound Program Library Exchange Ap.LCase LOWER CASE CHIP by Paul Brown Ap. LCase may be used only on a Rev.7 or later Apple. If you don't know what version your Apple is, STOP
More informationCommunications guide. Line Distance Protection System * F1* GE Digital Energy. Title page
Title page GE Digital Energy D90 Plus Line Distance Protection System Communications guide D90 Plus firmware revision:.9x GE publication code: 60-9070-F (GEK-3469) GE Digital Energy 650 Markland Street
More informationSINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm
SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5 ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm)
More informationParts List, Wiring Diagrams
Parts List, Wiring Diagrams PAH 210-300 SERIES 3 Phase PACKAGE AIR CONDITIONER UNITS TABLE OF CONTENTS PARTS LIST --------------2-5 PARTS DRAWINGS ------ 6-22 CHARGING CHARTS ---- 23-25 WIRING DIAGRAMS
More informationScorciatoie da tastiera - Circad 4.09
Scorciatoie da tastiera - Circad 4.09 File FE New File - File FO Open File - File FR Re-Open - File FT Total Recall - File FD Load - File FC Close File - File FE Erase File - File FS Save File - File FA
More informationLP-WU9100B User's Manual (detailed) Operating Guide Technical
DLP Projector LP-WU9100B User's Manual (detailed) Operating Guide Technical Supported Signal Input Modes Signal Format PC Apple MAC SDTV EDTV Resolution H Freq. KHz Frame Rate Hz PCLK MHz 5 B N C VGA RGB
More informationHash Constant C Determinants leading to collisionfree
Hash Constant C Determinants leading to collisionfree (Ernst Erich Schnoor) eschnoor@multi-matrix.de Addendum to article: Core of the CypherMatrix Method http://www.telecypher.net/corecyph.htm#z6 Object
More information6.1 Combinational Circuits. George Boole ( ) Claude Shannon ( )
6. Combinational Circuits George Boole (85 864) Claude Shannon (96 2) Signals and Wires Digital signals Binary (or logical ) values: or, on or off, high or low voltage Wires. Propagate digital signals
More information)- -% *)&%! $%!" (!*.-1 %,-+% --)+(!1 $!& *. &% '!!-%(# 000 $! )''.(%-1 )%! )' +!!%/!+ $+%, 1&)+ ' ()$ +! +%.-! 1 ).%,/%&&! +! ) %)(!!+, '*%(#!
+ 1 1 -)(, + ) )(+, (& (,)( (& +1 )(, /0 (& 000 ).(-1 ) ) ( ) )- - ))&5, &,, ) 2 3 ) 0(-14 + 5,3-0// 5. 207/ 4&/& 043 0)// 2830/ () )00-2&0(/9& / 12&3&/4& :4)&3& 47&/48 345&/43 74) )&-8 &/3& 30/ 04&-/(
More informationPE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
More informationUSB-ASC232. ASCII RS-232 Controlled USB Keyboard and Mouse Cable. User Manual
USB-ASC232 ASCII RS-232 Controlled USB Keyboard and Mouse Cable User Manual Thank you for purchasing the model USB-ASC232 Cable HAGSTROM ELECTRONICS, INC. is pleased that you have selected this product
More informationCase ast Doc 284 Filed 11/07/14 Entered 11/07/14 17:54:43 IN THE UNITED STATES BANKRUPTCY COURT FOR THE EASTERN DISTRICT OF NEW YORK
IN THE UNITED STATES BANKRUPTCY COURT FOR THE EASTERN DISTRICT OF NEW YORK ) In re: ) Chapter 11 ) LONG BEACH MEDICAL CENTER, ) et al., 1 ) STATE OF ILLINOIS ) ) ss COUNTY OF COOK ) Case No. 14-70593-ast
More informationX64. Operator's Guide TECHNICAL. Example of PC signal
X64 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: VA-8xl 8-Channel Balanced Stereo Audio Amplifier. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: VA-8xl 8-Channel Balanced Stereo Audio Amplifier P/N: 2900-300151 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3
More informationDigital Projector X30 Operator's Guide TECHNICAL
Digital Projector X30 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA
More informationMultiLink. HARDENED ETHERNET SWITCHES Ethernet Communications for Industrial Automation, Power Utility, and Traffic Control markets KEY BENEFITS
MultiLink KEY BENEFITS HARDENED ETHERNET SWITCHES Ethernet Communications for Industrial Automation, Power Utility, and Traffic Control markets Physically hardened and environmentally ruggedized for reliability
More informationSpecifications 36 Series Valve (Lifting Solenoid)
Specifications 36 Series Valve (Lifting Solenoid) Operating Data Fluids: ir or Inert Gas Lubrication: Not Required. But if used, select a medium aniline point oil (between 180ºF to 210ºF). Safe Operating
More information!"#$%&'#(!)*+(!,(*-+.'!/0-!$#'!&+,,*('!/'!!!"#$%&%#'"()*+!,&()*,
!"#$%&'#(!)*+(!,(*-+.'!/0-!$#'!&+,,*('!/'!!!"#$%&%#'"()*+!,&()*, - - !"#$% 7 7.1 7.2 #76-57 Q*?%")9,?%= 57 A?%9 >" =3"@); ',(F?%",5+, 57 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 2 2.1 2.2 2.3 2.4 2.5
More informationSIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information
SIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information General amendments to the documentation Contents This product information includes amendments
More informationLoad Feeders. Communication-capable load feeders
Load Feeders /2 Introduction Communication-capable load feeders ET 200S /4 ET 200S motor starters /8 Power modules for ET 200S motor starters /9 SIGUARD safety systems for ET 200S motor starters /10 ET
More informationLevel Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
More informationLevel sensor for monitoring the level of liquid media
Level sensor MG Level sensor for monitoring the level of liquid media Characteristics Level sensor output 4 20mA or Resistance output in three-wire potentiometer circuit Temperature range: -30 C to 150
More informationSR60 Busbar System 2/1. 2/2 Busbar routing. 2/3 Mounting components. 2/6 Accessories
SR60 Busbar System 2 2/2 Busbar routing 2/3 Mounting components 2/6 Accessories 2/1 SR60 Busbar System Busbar routing SR60 Busbar System Dimensions Order No. Price PG Weight PS*/ W x H x D mm mm mm 1 item
More information