Mechanical accessories

Transcription

1 Bearing box Part no , Part no Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC Material Shaft: Stainless steel, Housing: Aluminium, anodized Encoder shaft size Ø 6 mm Fits all shaft encoders with -51, -52 or -63 flange. For model 525 use adapter Part no Mounting kit for bearing box Part no , , Mounting kit For bearing box / Contains Shaft coupling , suitable O-ring, 3 mounting clamps with screws For encoder With -51 flange: part no With -63 flange: part no With -52 flange: part no

2 Bearing box Part no Part no Shaft size Ø 10 mm Shaft load max Radial: 200 N, Axial: 200 N Speed max 4000 rpm Protection class IP 64 according to IEC Material Shaft: Stainless steel, Housing: Aluminium, anodized Encoder shaft size Ø 12 mm Fits all 12 mm hollow shaft encoders with stator coupling

3 Insulated hollow shaft adapter Part no , , Part no Adapter inner diameter (Ø i ) Ø 6 mm G7 Ø 10 mm G7 Ø 12 mm G7 Adapter outer diameter (Ø o ) Ø 8 mm Ø 12 mm Ø 14 mm Material Load max Speed max PEEK Radial: 20 N, Axial: 10 N 6000 rpm Temperature Operating: -40 C C, Storage: -40 C C Electrical insulation < 500 VAC Encoder shaft size Ø 8 mm Ø 12 mm Ø 14 mm Encoder type Fits all hollow shaft encoders in the 500 series with shafts according to the specifications above

4 Mounting clamps Part no , Part no. (1 unit) For encoder type All encoders with -51 or -52 flange All encoders with synchro -63 flange Material Aluminium, anodized Recommended screw M3 x 16 M3 x 12 Encoder Mounting clamp Ø D 670, 672, 674, x ,5-51 flange 3 x ,0-52 flange 3 x ,0-63 flange 3 x ,5 Part no Part no

5 Measuring wheel Part no , Circumference 500 mm Surface material Burled rubber surface: part no PU-surface: part no Bordered PU-surface: part no Metal surface: part no Vulcolan smooth: part no Encoder shaft size Ø 10 mm Circumference 200 mm Surface material Burled rubber surface: part no PU-surface: part no Bordered PU-surface: part no Encoder shaft size Ø 10 mm Circumference 200 mm Surface material Burled surface: part no Encoder shaft size Ø 4 mm

6 Mounting bracket Part no , Part no For encoder type All encoders with -51 or -52 flange All encoders with -61 or -63 flange Material Aluminium, anodized Part no Part no

7 Springloaded bracket Part no , Part no For encoder type 500 serie encoders with -61 flange All encoders with -63 flange Material Aluminium, anodized Part no Part no

8 Torque arm with insulated rod ends Part no , Part no Fastening screw M5 M6 Length Min 70 mm, Max 1000 mm Measurements A / B Ø 5,0 mm / Ø 8,0 mm Ø 6,0 mm / Ø 9,0 mm Material Zink, plated steel Torque arm Part no Part no Fastening screw M5 - M6 Length 42 mm Fits all encoders with -56, -57, -58 or -59 flange

9 Torque bracket Part no Part no Fastening screw M4 Fits all encoders in the 500 series with -58 or -59 flanges and all encoders with -63 flange

10 Torque bracket Part no Part no Fastening screw M4 Fits all encoders in the 500 series with -58 or -59 flanges and all encoders with -63 flange

11 Torque bracket Part no Part no Fastening screw M4 Fits all encoders in the 500 series with -51, -56, -57, -58 or -59 flange

12 Torque bracket Part no Part no Fastening screw M4 Fits all encoders with -63, 58 and 59 flange

13 Torque bracket Part no Part no Fastening screw M4 Fits all encoders in the 500 series with -51, -56, -57, -58 or -59 flange

14 Torque bracket Part no Part no Fastening screw M2,5 Fits all encoders in the 500 series with -58 or -59 flange

15 Torque arm bracket Part no Part no Fastening screw M2,5 Fits all encoders in the 600 series with -58 or -59 flange

16 Torque arm bracket Part no Part no (fastening screws included) For 861, 862, 865 and 841 encoders

17 Torque arm bracket Part no Part no (fastening screws included) For 700, 8XI and 8X3 encoders

18 Stator coupling (multi functional) Part no Part no Fastening screw M2,5 Fits all encoders in the 600 series with -58 or -59 flange

19 Stator coupling Part no Part no Fastening screw M2,5 Fits all encoders in the 500 series with -58 or -59 flange Stator coupling Part no Part no Fastening screw M2,5 Fits all encoders in the 600 series with -58 or -59 flange

20 Adapter flange Part no Part no Fastening screw M4 Fits all encoders with -63 flange

21 Adapter flange Part no , Part no Fastening screw M3 M4 Encoder type Fits all encoders with -61 flange Part no Part no

22 Adapter flange Part no Part no Fastening screw M3 Fits all encoders with -51 or -52 flange

23 Clamping ring Part no , , Part no For shaft size Ø 10 mm Ø 12 mm Ø 14 mm Ø 15 mm For all encoders with -56, -57, -58 or -59 flange in the 500 series (fastening screws included) Clamping ring Part no Part no For shaft size Ø 12 mm For hollow shaft encoders in the RHA 600 series (fastening screws included) Clamping ring Part no Part no For shaft size Ø 12 mm For hollow shaft encoders in the IHA 600 series (fastening screws included)

24 Tether arm Part no Part no For encoders in the 700 series (fastening screws, washer and bushings included) Mounting screws Part no , Part no Mounting screws M3 x 60 mm M3 x 55 mm For encoders with -52 flange For encoders with -51 flange 28 January s can be changed without prior notice.