Series AM1S-Z 1 Watt DC-DC Converter

Transcription

1 Click on Series name for product info on aimtec.com Series AM1S-Z Models Single output Model Input Voltage (V) FEATURES: RoHS compliant Operating temperature -4 o C to + 85 o C 4 Pin SIP Package Input / Output isolation 1 and 3VDC Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 83% Output Voltage (V) Output Current max (ma) Isolation (VDC) Max Capacitive Load (µf) Input Current Full Load No Load (ma) Efficiency (%) AM1S-33SZ AM1S-35SZ AM1S-37SZ AM1S-39SZ AM1S-312SZ AM1S-315SZ AM1S-318SZ AM1S-324SZ AM1S-53SZ AM1S-55SZ AM1S-57SZ AM1S-59SZ AM1S-512SZ AM1S-515SZ AM1S-518SZ AM1S-524SZ AM1S-13SZ AM1S-15SZ AM1S-17SZ AM1S-19SZ AM1S-1212SZ AM1S-1215SZ AM1S-1218SZ AM1S-1224SZ AM1S-243SZ AM1S-245SZ AM1S-247SZ AM1S-249SZ AM1S-2412SZ AM1S-2415SZ AM1S-2418SZ AM1S-2424SZ AM1S-483SZ AM1S-485SZ AM1S-487SZ AM1S-489SZ AM1S-4812SZ AM1S-4815SZ AM1S-4818SZ AM1S-4824SZ AM1S-33SH3Z AM1S-35SH3Z AM1S-37SH3Z AM1S-39SH3Z AM1S-312SH3Z AM1S-315SH3Z AM1S-318SH3Z AM1S-324SH3Z F 51e R6.K 1 of 5 North America only

2 AM1S-53SH3Z AM1S-55SH3Z AM1S-57SH3Z AM1S-59SH3Z AM1S-512SH3Z AM1S-515SH3Z AM1S-518SH3Z AM1S-524SH3Z AM1S-13SH3Z AM1S-15SH3Z AM1S-17SH3Z AM1S-19SH3Z AM1S-1212SH3Z AM1S-1215SH3Z AM1S-1218SH3Z AM1S-1224SH3Z AM1S-243SH3Z AM1S-245SH3Z AM1S-247SH3Z AM1S-249SH3Z AM1S-2412SH3Z AM1S-2415SH3Z AM1S-2418SH3Z AM1S-2424SH3Z AM1S-483SH3Z AM1S-485SH3Z AM1S-487SH3Z AM1S-489SH3Z AM1S-4812SH3Z AM1S-4815SH3Z AM1S-4818SH3Z AM1S-4824SH3Z Input Specifications Parameters Nominal Typical Maximum Units Voltage range Capacitor Filter Turn on Transient process time 25 ms Start up time ms 3.3 Vin -6 5 Vin -7 Absolute Maximum Rating 12 Vin -15 VDC 24 Vin Vin -54 Peak Input Voltage time 1 ms Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 6sec 1 and 3 VDC Resistance > 1 MOhm Capacitance 6 pf Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±3 % Short Circuit protection Momentary (1 sec) Line voltage regulation (Single) For 1% change of Vin ±1.2 % of Vin F 51e R6.K 2 of 5 North America only VDC

3 Load voltage regulation (Single) Load 1% ±1 % Load voltage regulation (Single) 3.3V output model Load 1% ± % Temperature coefficient ±.2 %/ o C Ripple & Noise At MHz Bandwidth 1 mv p-p Capacitive load 2 μf Rising time 5 ms General Specifications Parameters Conditions Typical Maximum Units Switching frequency 1% load 8 KHz Operating temperature Full Load without Derating -4to +85 o C Storage temperature -55 to +125 o C Max Case temperature 1 o C Cooling Free air convection Humidity 95 % Case material Non-conductive black plastic UL94-VO Weight 1.8 g Dimensions (L x W x H).46 x.24 x.38 inches x 6. x 9.65 mm MTBF >1 191 hrs(mil-hdbk -217F, Ground Benign, t=+25 o C) NOTE: All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals Safety CE EN5522 (Radiated Emissions) class B EN5524 (Noise Immunity), IEC61-4-2(ESD) IEC61-4-3(Radiated immunity) Pin Out SpecificationsDimensions Pin Single 1 - V Input 2 +V Input 3 - V Output 4 +V Output 9.65 (.38) (.46) PRINTED FACE 6. (.24) 1.15 (.4).5 (.2) 2.54 (.1) 3.5 (.12) 6. (.24) 1.25 (.5).5 (.2).3 (.1).5 (.2) F 51e R6.K 3 of 5 North America only

4 Input Reflected Ripple Test Circuit Series AM1S-Z Vin+ L1 (12 µh) Test Point C1 (47 µf) + Vo+ Aimtec DC DC Converter Vin Vo RL (Full Load) * Tested at full load, and nominal input EMI Filtering To meet conducted emissions, the following circuit is recommended with the external components as noted in the table below. Model C1 L1 C2 C3 5Vin 2.2 µf / 1V 18 µh 12 Vin 2.2 µf / 1V 18 µh 24 Vin 2.2 µf / 1V 18 µh 2.2 µf / 1V 47pF / 2KV 48 Vin 1 µf / 1V* 18 µh 2.2 µf / 1V 47pF / 2KV * - Electrolytic Capacitor Type Additionally, in order to meet IEC and and external capacitor is recommended (ex. Nippon KY series of size 47µF / 1V). Typical Efficiency Chart Examples 1 AM1S 1215SZ Efficiency vs. Loading % 4% 6% 8% 1% F 51e R6.K 4 of 5 North America only

5 AM1S 245SZ Efficiency vs. Loading % 4% 6% 8% 1% AM1S 489SZ Efficiency vs. Loading % 4% 6% 8% 1% AM1S 515SZ Efficiency vs. Loading % 4% 6% 8% 1% NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at F 51e R6.K 5 of 5 North America only