IECEx Certificate of Conformity
|
|
- Avis Young
- 6 years ago
- Views:
Transcription
1 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit Certificate No.: IECEx EXA X Issue No: 1 Certificate history: Issue No. 1 ( ) Status: Current Page 1 of 4 Issue No. 0 ( ) Date of Issue: Applicant: Palazzoli S.p.A. Via F. Palazzoli Brescia Italy Electrical Apparatus: Optional accessory: Interlocked sockets-outlet with or without junction boxes type TAIS EX SERIES / 46****EX; 47****EX; 53224*EX Type of Protection: nr, tb Marking: Ex nr IIC T6 Gc Ex tb IIIC T80 C/T100 C/T115 C Db Approved for issue on behalf of the IECEx Certification Body: Stipo Đerek Position: Director General Signature: (for printed version) Date: 1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website. Certificate issued by: Agencija za prostore ugrožene eksplozivnom atmosferom (Ex- Agencija) HR Sveta Nedelja
2 IECEx Certificate of Conformity Certificate No: IECEx EXA X Issue No: 1 Date of Issue: Page 2 of 4 Manufacturer: Palazzoli S.p.A. Via F. Palazzoli Brescia Italy Additional Manufacturing location(s): This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended. STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC : 2011 Edition:6.0 IEC : 2010 Edition:4 IEC : 2013 Edition:2 Explosive atmospheres - Part 0: General requirements Explosive atmospheres - Part 15: Equipment protection by type of protection "n" Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in Test Report: HR/EXA/ExTR /01 HR/EXA/ExTR /00 Quality Assessment Report: IT/IMQ/QAR /01
3 IECEx Certificate of Conformity Certificate No: IECEx EXA X Issue No: 1 Date of Issue: Page 3 of 4 Schedule EQUIPMENT: Equipment and systems covered by this certificate are as follows: The interlocked sockets-outlet TAIS EX SERIES / 46****EX; 47****EX; 53224*EX are designed in three versions: - Interlocked sockets with fuses. Inside the socket are present functional assemblies connected in series: lock switch fuseholder - socket. Abbreviation for this version is PR.FUS. - Interlocked sockets with magnetotermic. Inside the socket are present functional assemblies connected in series: magnetotermicswitch socket. Abbreviation for this version is PR.MT. - Direct interlocked sockets. Inside the socket are present functional assemblies connected in series: lock switch - socket. Abbreviation for this version is PR.DIR. The interlocked sockets-outlet are intended to be installed in stand-alone with or without terminal box or in assembly with two sockets outlets and one terminal box. (See attachments.) CONDITIONS OF CERTIFICATION: YES as shown below: 1. The cable connection of the equipment with rated current of 63 A shall be suitable for temperature at least 105 C. 2. Appropriate method of installation, maintenance and operation, should prevent accumulation of static charge on the equipment because surface resistance of handle material is higher than 10 9 Ω. 3. The equipment can be installed in stand-alone mode (with or without junction box) or as a combination with two sockets and one junction box. 4. The equipment is intended for fixed installation and must be installed in vertical position. 5. The interlocked socket outlets shall be installed only with appropriate separately certified plug.
4 IECEx Certificate of Conformity Certificate No: IECEx EXA X Issue No: 1 Date of Issue: Page 4 of 4 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): This addendum covers the extension to new type code of version direct interlocked sockets ( PR.DIR.). The new version is intended for explosive gas atmospheres, EPL Gc with the rated characteristics given in the attachment 2 (IECEx_EXA_15_0004_ISSUE No 1_ANNEX_EX-TAIS). Annex: IECEx_EXA_15_0004_ANNEX_EX-TAIS.pdf IECEx_EXA_15_0004_ISSUE No 1_ANNEX_EX-TAIS.pdf
5 Issue No. 0 Date: Page: 1 of 5 Interlocked sockets-outlet with or without junction boxes type TAIS EX SERIES / 46****EX; 47****EX; 53224*EX Rated Characteristics: Switch short circuit conditional current max 10 ka Maximum rated voltage 50 / 110 / 230 / 400 / 500 V ac Rated current 16 / 20 / 32 / 40 / 63 A Frequency Hz or 100 Hz Hz Insulation class II Ambient temperature -20 C Ta +40 C IP protection degree IP66 category 1 according to IEC Maximum number of wires to the terminal 1 The type of interlocked sockets-outlet with fuse (PR.FUS.) are listed in following tables: EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db 20 (Gc) / 32 (Db) 110 2P+T EX Gc / Db 20 (Gc) / 32 (Db) 110 3P+T EX Gc / Db 20 (Gc) / 32 (Db) 110 3P+N+T EX Gc / Db 20 (Gc) / 32 (Db) 230 2P+T EX Gc / Db 20 (Gc) / 32 (Db) 230 3P+T EX Gc / Db 20 (Gc) / 32 (Db) 230 3P+N+T EX Gc / Db 20 (Gc) / 32 (Db) 400 2P+T EX Gc / Db 20 (Gc) / 32 (Db) 400 3P+T EX Gc / Db 20 (Gc) / 32 (Db) 400 3P+N+T 6, HR,,
6 Issue No. 0 Date: Page: 2 of EX Gc / Db 20 (Gc) / 32 (Db) 500 3P+T EX Gc / Db 20 (Gc) / 32 (Db) 500 3P+N+T EX Gc / Db 20 (Gc) / 32 (Db) P+T EX Gc / Db 20 (Gc) / 32 (Db) P+N+T EX Gc / Db 20 (Gc) / 32 (Db) P+T EX Gc / Db 20 (Gc) / 32 (Db) P+T EX Gc / Db 20 (Gc) / 32 (Db) P+N+T EX Gc / Db 20 (Gc) / 32 (Db) P+T EX Gc / Db 20 (Gc) / 32 (Db) P+N+T EX Gc / Db 20 (Gc) / 32 (Db) 380 / 440 3P+T EX Gc / Db 20 (Gc) / 32 (Db) 380 / 440 3P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Db P+T EX Db P+T EX Db P+N+T EX Db P+T EX Db P+T EX Db P+N+T EX Db P+T EX Db P+T EX Db P+N+T EX Db P+T EX Db P+N+T EX Db P+T EX Db P+N+T EX Db P+T EX Db P+N+T 11, HR,,
7 Issue No. 0 Date: Page: 3 of 5 The type of interlocked sockets-outlet with MCN - Miniature Circuit Breaker (PR.MT.) are listed in following table: EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Db P+T EX Db P+T EX Db P+N+T 6 The type of interlocked sockets-outlet by switchgear (PR.DIR.) are listed in following table: EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T 6, HR,,
8 Issue No. 0 Date: Page: 4 of EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db P+T EX Gc / Db P+N+T EX Gc / Db / 440 3P+T EX Gc / Db / 440 3P+N+T EX Gc / Db 40 (Gc) / 63 (Db) 400 3P+T EX Gc / Db 40 (Gc) / 63 (Db) 400 3P+N+T EX Gc / Db 40 (Gc) / 63 (Db) 110 2P+T EX Gc / Db 40 (Gc) / 63 (Db) 110 3P+T EX Gc / Db 40 (Gc) / 63 (Db) 110 3P+N+T EX Gc / Db 40 (Gc) / 63 (Db) 230 2P+T EX Gc / Db 40 (Gc) / 63 (Db) 230 3P+T EX Gc / Db 40 (Gc) / 63 (Db) 230 3P+N+T EX Gc / Db 40 (Gc) / 63 (Db) 400 2P+T EX Gc / Db 40 (Gc) / 63 (Db) 500 3P+T EX Gc / Db 40 (Gc) / 63 (Db) 500 3P+N+T EX Gc / Db 40 (Gc) / 63 (Db) P+T EX Gc / Db 40 (Gc) / 63 (Db) P+N+T EX Gc / Db 40 (Gc) / 63 (Db) P+T EX Gc / Db 40 (Gc) / 63 (Db) P+N+T 11 The type of terminal boxes are listed in following table: Code EPL Dimension [mm] EX Gc / Db 125 x 185 x EX Gc / Db 250 x 185 x EX Gc / Db 380 x 185 x 125, HR,,
9 Issue No. 0 Date: Page: 5 of 5 The maximum surface temperature for dust marking EPL Db and temperature class for EPL Gc depend on rated current: Rated EPL Version current Ex Marking Gc Db PR.FUS. PR.MT. PR.DIR. PR.FUS. PR.MT. PR.DIR. [A] Ex nr IIC T6 Gc 16 Ex tb IIIC T80 C Db Ex tb IIIC T100 C Db 63 Ex tb IIIC T115 C Db Routine tests: The manufacturer shall carry out the routine tests prescribed in cl and of IEC , HR,,
10 Issue No. 1 Date: Page: 1 of 1 This addendum covers the extension to new type code of version direct interlocked sockets (PR.DIR.). The new version is intended for explosive gas atmospheres, EPL Gc with the following rated characteristics: Switch short circuit conditional current Maximum rated voltage Rated current Frequency Insulation class max 10 ka 50 / 110 / 230 / 400 / 500 V ac 50 A or 63 A Hz or 100 Hz Hz Ambient temperature -20 C Ta +40 C IP protection degree IP66 category 1 according to IEC Maximum number of wires to the terminal 1 Ex Marking is Ex nr IIC T6 Gc. The types of interlocked sockets-outlet by switchgear (PR.DIR.) covered by this addendum are listed in following table: EX Gc 63 / 50* (Gc) 400 3P+T EX Gc 63 / 50* (Gc) 400 3P+N+T EX Gc 63 / 50* (Gc) 110 2P+T EX Gc 63 / 50* (Gc) 110 3P+T EX Gc 63 / 50* (Gc) 110 3P+N+T EX Gc 63 / 50* (Gc) 230 2P+T EX Gc 63 / 50* (Gc) 230 3P+T EX Gc 63 / 50* (Gc) 230 3P+N+T EX Gc 63 / 50* (Gc) 400 2P+T EX Gc 63 / 50* (Gc) 500 3P+T EX Gc 63 / 50* (Gc) 500 3P+N+T EX Gc 63 / 50* (Gc) P+T EX Gc 63 / 50* (Gc) P+N+T EX Gc 63 / 50* (Gc) P+T EX Gc 63 / 50* (Gc) P+N+T 11 * The direct 63 A interlocked sockets (EPL Gc) installed in distribution board configuration (installed together with junction box) shall be reduced to 50 A. II, HR,,
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:3 Status: Current Date of Issue: 2012-10-12
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:2 Status: Current Certificate history:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: IECEx FTZU 14.0004X Current
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: IECEx TRC 12.0010X Current
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx PTB 05.0013 issue No.:2
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:5 Status: Current Date of Issue: 2016-04-06
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx BKI 07.0001X issue No.:1
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx LCI 10.0010X issue No.:1
More informationRefer to attachment for more details. Andreas Meyer
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationPage 1 of 5. Increased Safety, Encapsulation and Dust
IEC INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www iecex com Certificate No.: Status: Date of Issue: IECEx
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx ITA 14.0009X Issue No:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx ITA 10.0006X Issue No:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: IECEx UL 15.0032X Current
More informationINTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Issue No.
More informationI Ex-Installation switch I
I Ex-Installation switch I Switch/Pushbutton Technical data 4 Ex-installation switch and Ex-pushbuttons Marking accd. to 94/9/EC II 2 G Ex de IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Status: Current Page 1 of 5 issue No.:1 Certificate
More informationIECEx Certificate of Conformity
Certificate : IECEx PTB 04.0005 http://iecex.iec.ch/iecex/iecexweb.nsf/certificatesajax/iecex%20ptb%2004.0005%... Seite 1 von 4 10.01.2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: issue No.:O Certificate history:
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the ECEx Scheme visit www.iecex.com Certificate No.: Status: Current Issue No: 1 Certificate
More informationINTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: Date of lssue: Applicant:
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx PTB 10.0014U Date of Issue: 2010-03-02 Issue No.: 0 Page 2 of 3 Manufacturer: BARTEC GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim Germany Manufacturing
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: issue No.:O Certificate history:
More informationECE Cert.fic te of Con ormity
ECE Cert.fic te of Con ormity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
IECEx Certificate of INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status:
More informationOperating instructions (Safety-related part ATEX and IECEx) Inductive NAMUR sensors NN504A NN505A NN506A NN507A /00 08/2015
Operating instructions (Safety-related part ATEX and IECEx) Inductive NAMUR sensors NN504A NN505A NN506A NN507A 80013497/00 08/015 Remarks for safe use in hazardous areas Functions and features Use in
More informationIECEx Certificate of Conformity
IECEx Certificate INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: IECEx
More informationIECEx Certificate of Conform ity
-------- -- - IECEx Certificate INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certitication Scheme tor Explosive Atmospheres tor rules and details of the IECEx Scheme visit v..ww.iecex.com Certificate
More informationtopter SERIES ACTIVE PROTECTION Leading Electrotechnology
topter SERIES ACTIVE PROTECTION Leading Electrotechnology topter series Active protection Industrial sockets splash proof and watertight IP44, IP66/IP67 product specifications Conformity to standards EN
More informationIECEx Certificate of Conformity
--- Certificate : ECEx PTB 13.0036X Seite 1 von 5 ECEx Certificate ------ -- l "-- - --- --- NTERNATONAL ELECTROTECHNCAL COMMSSON EC Certification Scheme for Explosive Atmospheres for rules and details
More informationIECEx Ce ificate of Conformi
IECEx Ce ificate of Conformi INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Status:. IECEx DEK
More informationLoads and Motor Switchgears
5 Loads and Motor Switchgears Motor Switches BLK Series Explosion-proof Motor Switches to -CENELEC -IEC -NEC Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Class I, Zone 1 and Zone 2 Class I, Division
More informationCoil Type 3009M. This document cannot be modified without the approval of the Certification Institute 1/4
Coil Type 3009M Coil Type 3009M UE DECLARATION OF CONFORMITY 1/4 Coil Type 3009M COIL 3009M II 2G Ex mb IIC Tx Gb II 2D Ex tb IIIC Tx C Db to be used in potentially explosive atmosphere We, AMISCO S.p.A.,
More informationTerminal Boxes Series 8118
> Enclosure made of glass fibre reinforced polyester resin > sizes available > Terminals and cable glands fitted to order > Enclosure design with integrated metal bracket for metal cable glands. > Degree
More informationSafety instructions Overvoltage protection B81-35
Safety instructions Overvoltage protection B81-35 IECEx BVS 15.0084X Intrinsic safety Document ID: 51001 Contents 1 Area of applicability... 3 2 General information... 3 3 Technical data... 5 4 Application
More information(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and protective systems intended for use in potentially explosive atmospheres Directive 94/9/EC (3) EC-type-examination Certificate number
More informationLinear Luminaire with LED Series 6412/5
> For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
More informationOperating Manual / IEC. Explosion-Proofed Junction Boxes, Polyester. Wallücker Bahndamm 7 DE Kirchlengern
Operating Manual / IEC Explosion-Proofed Junction Boxes, Polyester Wallücker Bahndamm 7 DE- 32278 Kirchlengern Tel.: +49 5223 49107-0 Fax: +49 5223 49107-28 info@multi-box.com www.multi-box.com Contents
More informationThe 470-Z1 consists of an aluminium enclosure, which has the supply / interface connections either via the bottom side or enclosure back panel.
February 23, 2018 Annexe to: IECEx CML 15.0097X Issue 4 Applicant: Apparatus: HMI Elements Limited 470-Z1 Module Description of Equipment The 470-Z1 is a mains supplied, transportable hazardous area
More informationMiniature Circuit-Breaker IEC Series 8562
> 1 to 3 pole versions > Rated current from 0.5... 40 A > 6 or 10 ka breaking capacity to DI VDE 0641, respectively E 60898 > Isolating Function to E 60947-2 > Permanently set thermal and magnetic trips
More informationOperating Instructions
Introduction To protect the signal lines of field devices and systems in the cabinet against lightning. Pepperl+Fuchs covers the complete range of Surge Protection Barriers. Housing types Depending on
More information~ _ Mir1<oBalaz
NTERNATONAL ELECTROTECHNCAL COMMSSON EC Certification Scheme for Explosive Atmospheres for rules and details of the ECEx Scheme visit www.iecex.com Certificate No.: r Status: Current Date of ssue: Certificate
More informationSolConeX extra-low voltage flange socket
SolConeX extra-low voltage flange socket Operating instructions Additional languages www.stahl-ex.com Contents 1 General Information...3 1.1 Manufacturer...3 1.2 Information regarding the operating instructions...3
More informationTerminal Block Catalog Numbers 1719-TB6, 1719-TB6S, 1719-TB8, 1719-TB8S, 1719-TB8Sx2, 1719-TB8x2
Technical Data Communication Adapter Catalog Number 1719-AENTR I/O Module Catalog Numbers 1719-IJ, 1719-IBN8B, 1719-IF4HB, 1719-IR4B, 1719-IT4B, 1719-OB2, 1719-OB2L, 1719-CF4H Power Supply Catalog Number
More informationInstallation & Operation Manual
Via Enrico Fermi, 2 I-25015 Desenzano del Garda (BS) - Italy Phone: +39 030 7870787 Fax: +39 030 7870777 www.solexy.net BAF Intrinsically Safe Ethernet Coupler for signals operating in Hazardous Areas
More informationACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS IA CERTIFICATE
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 233 Edition 2.0 2017-02 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Operational Document IECEx
More informationMicro Motion, Inc. Page 1 of 6
EB-20025742 Revision: AA Number of Pages: 6 Comments: Originator: HVH 10/01/13 Approved: RCS 11/26/13 Rev ECN Description Approval Date AA 1049085 Release to Approvals RCS 11/26/13 Micro Motion, Inc. Page
More informationDECONTACTOR METAL 20 A/32 A/63 A/125 A/200 A
X ECONTACTOR 20 A/32 A/63 A/125 A/200 A II2 G Ex de IIC, t 1 IP65 water-and dust-tight Integrated load-break switch Locking in connected or disconnected position by keying axis 178 X TECHNIL FEATURES X1
More informationLinear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
More informationFLEX Ex Spring Clamp Terminal Base
Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification
More informationProduct manual plug, sockets and coupler 16 A.- Z0251
Product manual plug, sockets and coupler 16 A.- Z0251 INDEX ELEKTRO BV Harregatplein 15 3214 VP Zuidland Netherlands T. +31(0)181 452120 http/www.indexelektro.nl email info@indexelektro.nl Purpose of these
More informationM E M O R A N D U M I.S.
Physikalisch-Technische Bundesanstalt Department 3.6 " Intrinsic safety and Safety of Systems" 38023 Braunschweig Germany P.O. Box 33 45 Tel. ++49 531 592-3630 Fax ++49 531 592-3605 M E M O R A N D U M
More informationSafety instructions. IECEx TUN Ex ia IIC T6 Gb
Safety instructions ÜSB62-36G.C_* and ÜSB62-30W.C_* IECEx TUN 07.0002 Ex [ia Ga] IIC T6 Gb Ex ia IIC T6 Gb 0044 39878 Content 1 Area of applicability 3 2 General 3 3 Electrical data 3 3.1 Application conditions
More informationTermination Board FC-GPCS-SAI16-PF. Features. Assembly. Function. Connection. SAI-1620m HART 24 V DC (I), 24 V DC (II) Fault. Zone 0, 1, 2 Div.
Features Assembly System board for Honeywell Safety Manager For 6-channel AI card SAI-60m For 6 modules Recommended module: HiC05 (AI) 4 V DC supply Hazardous area: pluggable screw terminals, blue Non-hazardous
More informationJunction Boxes & Enclosures JBEA and ECEA Series: Aluminum Enclosures Increased Safety
PCe Type CAe Type Compliance Data: ATEX - IEC: ATEX IEC CE Ex ia IIC; Ex ib IIC T6 to T2 Ex td A21 T0 C to T290 C Ex de IIC Operating Temperatures: -40 C to +55 C (CAe) -55 C to +60 C (PCe) 223 ATX Product
More informationGrounding Monitoring Device Series 8485
www.stahl.de > Controlled electrostatic grounding of road tankers and rail cars during loading > Continuous monitoring of correct grounding > The object recognition prevents potential operator errors (with
More informationSolConeX Wall-Mounted Socket, 16 A
SolConeX Wall-Mounted Socket, 16 A Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information Regarding the
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 502 Edition 2.0 2013-04 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Scheme for Certification
More informationSignal processor MS96 for flow sensors MS96-11EX0-R/230VAC
MS96-11EX0-R/230VAC ATEX category II (1) G, Ex Zone 0 ATEX category II (1) D, Ex Zone 20 single-channel signal processor MS96 for connection of an intrinsically safe flow control sensor in zone 0 adjustment
More informationZener Barriers Bulletin 937Z
Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution
More informationGrounding Systems / Ground Monitoring Device Series 8146/5075 and 8125/5071
www.stahl.de > Monitored electrostatic grounding of tank containers and drums during loading > Continuous monitoring of correct grounding > Robust design > Weather-protected plastic enclosure (IP66) or
More informationSRI LANKA STANDARD CODE OF PRACTICE FOR GRID CONNECTED PHOTOVOLTAIC POWER SYSTEMS SLS 1522:2016
SRI LANKA STANDARD CODE OF PRACTICE FOR GRID CONNECTED PHOTOVOLTAIC POWER SYSTEMS SLS 1522:2016 BY H S W Karunaratne Assistant Director - Engineering Sri Lanka Standards Institution. 1 DEFINITIONS Ac module:
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationLinear Luminaire with LED Series EXLUX 6002/1 Version IIB+H2
> For use in hazardous areas with gas group IIB+H 2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationThe Solid-State Decoupler (SSD)
The Solid-State Decoupler (SSD) Installation Instructions Introduction The Solid-State Decoupler (SSD) is a solid-state DC isolation/ac grounding (i.e., coupling) device design ed for use in conjunction
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More informationINSTITUTE OF TESTING AND CERTIFICATION (INDIA) PVT. LTD.
(INDIA) VT. LTD. 5. INCOMING SULY CONDUCTOR TERMINATIONS AND DEVICES FOR DISCONNECTING AND SWITCHING OFF 5.1 Incoming supply conductor terminations The electrical equipment of the machine shall have only
More informationCertificate of Conformity Ex EQUIPMENT
Applicant: ecom instruments GmbH Industriestrasse 2 97959 Assamstadt Germany Equipment: Intrinsically Safe TRUE RMS MULTIMETER Fluke 28 II EX Type of Explosion Protection: Explosion Protection Marking:
More informationData sheet. Constant current DALI LED control gear 80 W Output power ma Output current Intelligent temperature protection.
Data sheet Constant current DALI LED control gear 8 W Output power 5 7 ma Output current Intelligent temperature protection Linear VI LED Linear VI LED control gear More than 25 years of experience in
More informationIECEx OPERATIONAL DOCUMENT
IECEx OD 502 Edition 3.0 2016-09 IECEx OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Scheme for Certification
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationThis installation guide provides instructions for installing the SPARTAN HP Highbay/ Floodlight series of explosion protected floodlights.
SPX/SPZ SPARTAN HIGH POWER LUMINAIRE RANGE Installation Guide Zone 1 Variant - CML17ATEX1148 & IEC Ex CML17.0074 Zone 2 Variant - CML17ATEX4149 & IEC Ex CML17.0074 This installation guide provides instructions
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More informationControl Stations & Switches: Switches, Circuit Breakers and "Break Glass" Call Points SWE Series: 16 and 20 A Switches Increased Safety
SWE Series: 16 and 2 A Switches Increased Safety 16 A Version - Type 1 16 A Version - Type 2 2 A Version Compliance Data: ATEX - IEC: Zone 1 & 2, 21 & 22 ATEX IEC CE Ex de IIC T6 Ex td A21 T8 C IP66 -
More informationInstallation & Operation Manual
Via Enrico Fermi, 2 I-25015 Desenzano del Garda (BS) - Italy Phone: +39 030 7870787 Fax: +39 030 7870777 www.solexy.net BAF Intrinsically Safe Ethernet Coupler for signals operating in Hazardous Areas
More informationTechnical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 5 mm
Model Number Features 5 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications Switching element function
More informationTechnical Data. General specifications. Output type Rated operating distance s n 8 mm
Model Number Features Increased operating distance 8 mm flush ATEX-approval for zone 2 and zone 22 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
More informationCertificate of Conformity
Applicant: Mine Safety Appliances Co. 1000 Cranberry Woods Drive Cranberry Township PA 16066-5207 United States of America Electrical Apparatus: Altair 5 / 5X Diffusion / Pumped Multi-Gas Detector Type
More informationTechnical Data. Dimensions
Model Number Features 50 mm flush -wire DC S Technical Data specifications Switching function Normally open (NO) Output type PNP Rated operating distance s n 50 mm Installation flush Output polarity DC
More informationEx Certificate of Conformity
Standard Form for Evaluation of the Quality Management System used in the Production Process and Product Testing Issue date: 09-10-2015 Page 1 of 5 Expiration date: 09-10-2018 Applicant: Electrical apparatus:
More informationTubular Light Fitting with LED Series 6036
> Extremely robust luminaire design for rough ambient conditions > Very lightweight and vibration resistant LED light fitting > Extremely long service life due to LED used > High power LEDs including driver
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. WirelessHART components Gateway and accessories
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET WirelessHART components Gateway and accessories 2 Measurement made easy The ABB offering on WirelessHART accessories connect wireless sensors to the automation
More informationIEC An introduction. 28 March 2012 By Craig McKee Technical Manager
IEC 61439 An introduction 28 March 2012 By Craig McKee Technical Manager We recommend that you purchase your relevant national standard, or the International Standard which is available directly from the
More informationATX MRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air conditioning equipment Compressors Pumps For use
More informationProviding flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
More informationSUPPLEMENTARY TYPE EXAMINATION CERTIFICATE
1. SUPPLEMENTARY TYPE EXAMINATION CERTIFICATE 2. Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC 3. Type Examination Certificate Number: ITS13ATEX47876X/1
More informationJunction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
More informationSEM310 SEM310X HART UNIVERSAL TEMPERATURE TRANSMITTER
HART 5,6,7 COMPATABLE UNIVERSAL INPUT, DUAL CHANNEL ATEX & IEC Ex Version MATHS FUNCTIONS FLASH TESTED TO 4 KV DC INTRODUCTION The SEM310 is a HART 5 upwards, (generic device) compatible universal transmitter.
More informationSales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - P O W E R C I R C U I T B R E A K E R S Up to 630 A CEAG power circuit breakers enable making or breaking of circuits under normal operating conditions as well as cutting in, briefly conducting and
More informationMRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
MRE Series 16 and 32 Amp Multiple Socket Outlets Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air
More informationSMARTLINE RM76 Supplementary instructions
SMARTLINE RM76 Supplementary instructions 2-wire / Guided Radar (TDR) Level Meter Supplementary Instructions for ATEX applications CONTENTS SMARTLINE RM76 1 General safety information 5 1.1 Scope of the
More informationCertificate of Conformit r IECExPTB 10.0018X htþ://iecex.iec.ch/iecex/iecexweb.nsfl42 I ce88 1 5c53a3afcl257 ale... ts IECEx Gertificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEG Certification
More informationPower supply. Phases: 3. Short-circuit capacity 10 ka AGS
5113003 Power supply Voltage: 400 V AC Phases: 3 Frequency: 50 Hz Current: 6 A Short-circuit capacity 10 ka AGS CE marking location The CE marking is located on the outside of the door, in the upper left
More informationPHOENIX CONTACT Pin. SUBCON-PLUS M ARCNET, MULTI/MININET (B&R), SYSTEM 2003 (B&R), P-NET SUCONET K1, K2 (EATON/Moeller),
Fast connector with screw terminal block connection for fieldbus systems Data sheet 00287_en_02 PHOENIX CONTACT 207-04-2 Description The SUBCON-PLUS/... D-SUB series is specifically designed for use in
More informationIECEx Certificate of Conformity
Annex Page 1 of 9 Details associated with Issue 2 Changes: Change in ambient range to include the upper limit of +65 C for Junction Boxes fitted with Terminal blocks series UK N (IECEx KEM 06.0034U). Re-evaluation
More informationSafety Instructions Omnigrad TRxx, TCxx, TxCxxx
XA01459T/09/EN/01.16 71340269 Products Solutions Services Safety Instructions Omnigrad TRxx, TCxx, TxCxxx RTD/TC modular thermometers 0ExiaIICT6...T1 X Document: XA01459T Safety instructions for electrical
More information