Thanks for shopping with Improvements! Personalized Holiday Laser Show Item #563474

Size: px

Start display at page:

Download "Thanks for shopping with Improvements! Personalized Holiday Laser Show Item #563474"

Sophie Gallagher
6 years ago
Views:

1 Thanks for shopping with Improvements! Personalized Holiday Laser Show Item # Note: When using this item, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Follow the instructions on the DANGER label (See page 8) on the Laser box. This item uses a laser light beam. Do not attempt to service this device due to possible eye injury. Never point the Laser beam at anyone. Never look directly into the Laser beam. Keep this item away from children. Parts List: To order, call West Chester, OH Made in China 1117 If you have questions regarding this product, call Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or productspecialist@improvementscatalog.com See many more products on the Internet! Holiday Laser Show # Current instructions at Page 1 of 8

2 SAFETY INSTRUCTIONS IMPORTANT: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. WARNING: THIS IS NOT A TOY! THIS PRODUCT CONTAINS SMALL PARTS WHICH COULD CAUSE CHOKING IF SWALLOWED. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. IF SERVICING IS NEEDED, SEND TO QUALIFIED SERVICE PERSONNEL. PLEASE ADHERE TO THE FOLLOWING: A. Read Instructions - All safety and operating instructions should be read before the item is operated. Please adhere to these instructions and warnings for your safety. B. Heat - The item should be situated away from heat sources such as radiators, hairdryers, heat registers, stoves or other appliances that produce heat. C. Do not let any items such as lamps, rugs, etc. rest on or cover the power cord or on any wire. D. Power Sources - The item should be connected to a power supply only like the one that is provided with the item. 1) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 2) Do not hang ornaments or other objects from cord. 3) Do not close doors or windows on the product or product cords as this may damage the wire insulation. 4) Unplug the product when leaving the house, retiring at night or if left unattended. E. Damage Requiring Service Refer all servicing to a qualified service personnel. Have a qualified service personnel service this item when: 1) The power-supply cord or plug has been damaged. 2) All troubleshooting techniques have been tried and the item will not work or has stopped working. 3) The item has been dropped or the enclosure damaged and no longer works. F. This product is intended for seasonal use throughout the year. It is not intended for permanent installation or use. G. To avoid risk of fire, burns, personal injury and electrical shock, this item should not be played with or placed where small children can reach it. H. Do not allow the adapter/plug be exposed to water. Be sure it is covered from rain or any spraying water; be sure it will not sit in a puddle. I. Do not use this product for other than its intended use. J. Do not cover the product with cloth, paper or any material not part of the product when in use. SAVE THESE INSTRUCTIONS. Holiday Laser Show # Current instructions at Page 2 of 8

3 Step 1 1. Carefully remove the unit from the packaging. 2. Secure the unit on the included stake or stand according to the following diagram: TO STAKE IN GROUND STAND FOR FLAT SURFACE 3. Push the stake to the ground, and ensure the unit is stable. 4. Adjust the angle and height of the unit to a desired projecting position by loosening, adjusting the unit and securing the adjusting knob (See figures below). 5. A tripod stand is included to display the unit on a hard, flat surface. See figures above and below for assembly and display instructions. Holiday Laser Show # Current instructions at Page 3 of 8

TOP OF THE UNIT cover screen is under the cover BOTTOM OF THE UNIT Step 2 1. Adjust the positioning of the unit on the stake or stand so that the show is aimed at your desired projection surface.

4 TOP OF THE UNIT cover screen is under the cover BOTTOM OF THE UNIT Step 2 1. Adjust the positioning of the unit on the stake or stand so that the show is aimed at your desired projection surface. Stake or place the unit on a flat surface and make sure it is 10ft 15ft away from the desired projection surface. Move the unit back to expand projection or forward to make projection smaller. 2. Use the Adjustment Knob to change and set the angle of the projector. 3. Once the unit is plugged in, press the POWER button to turn ON. When the unit turns on and the last song was a Christmas song, the last song selected will play and then only Christmas songs will play sequentially. When the unit is turned on and the last song was either Halloween sounds, Happy Birthday, or Auld Lang Syne ( Happy New Year ), the unit will continue to play that song until another song is selected. 4. The unit is on an automatic 6 hour timer. When the unit is turned on, it will play for 6 hours continuously, and then turn off for 18 hours. When the unit turns back on after 18 hours, it will start playing the last song selected as described above. If a unique message is playing when the unit turns off, the message in the #1 saved position will play when the unit turns on. Note: If you have planned for the unit to turn on at the same time each day, and while it is off you press the power button to turn it on, the unit will begin a NEW cycle of 6 hours on and 18 hours off at time. 5. Use the VOLUME dial to adjust the volume of the music. Holiday Laser Show # Current instructions at Page 4 of 8

TO PLAY PRE-PROGRAMMED SONGS/LASER SHOWS 1. Note: the stylus is stored in the clips on the bottom of the unit. When the unit is first turned on the screen will say Lite-Write Laser Show.

When the unit is first turned on, it will automatically start with a Christmas song and automatically scroll through all 12 Christmas songs and keep playing sequentially. 3.

5 TO PLAY PRE-PROGRAMMED SONGS/LASER SHOWS 1. Note: the stylus is stored in the clips on the bottom of the unit. When the unit is first turned on the screen will say Lite-Write Laser Show. This screen will remain for 30 seconds - touch the stylus to the screen to get to the songs or programmable message screen. 2. The unit comes with 12 Christmas songs and 3 Holiday songs. When the unit is first turned on, it will automatically start with a Christmas song and automatically scroll through all 12 Christmas songs and keep playing sequentially. 3. To select a new song, open the cover at the top of the unit. The screen will display Light Shows 4. Using the stylus, touch the desired song name which will then be highlighted in a red box. 5. Or touch Next or Prev on the right hand side of the screen. 6. Using the stylus, press play. The songs will play continuously and sequentially until another song is selected. 7. If choosing to play Halloween, Auld Lang Syne ( Happy New Year ) or Happy Birthday To You, please note each individual song will repeat automatically until a new song is selected. Holiday Laser Show # Current instructions at Page 5 of 8

TO WRITE AND PLAY A YOUR SPECIFIED MESSAGE 1. The unit can store up to 10 messages, each message has a maximum 510 letter or symbol limit. There is no music when these messages play.

Use Shift to change from lower case to upper case and Back to erase. 4. Type your desired message. 5. After the message is complete, use the stylus to touch the Go button - the message will be played.

6 TO WRITE AND PLAY A YOUR SPECIFIED MESSAGE 1. The unit can store up to 10 messages, each message has a maximum 510 letter or symbol limit. There is no music when these messages play. Please note that a period (. ) is not an option. 2. To input a message, use the stylus to press the Message Laser tab at the top middle of the screen. 3. Use Shift to change from lower case to upper case and Back to erase. 4. Type your desired message. 5. After the message is complete, use the stylus to touch the Go button - the message will be played. 6. To save a message, type out a message and press Save on the right hand side of the screen. The screen will automatically jump to the Saved Message. 7. Using the stylus, select desired message position from 1 to 10 and press the Store button. The messages are now saved and and will show on the screen until deleted. 8. To play a saved message, make sure the Saved Message page is showing. 9. Use the stylus to choose your desired message, and press Load which automatically changes to the Message Laser page where the message will be displayed. 10. Press the GO button to play the message. To delete a message, go to the Saved Message page and highlight the message. Press Delete. Holiday Laser Show # Current instructions at Page 6 of 8

7 TROUBLESHOOTING Problem Likely Cause Possible Solution No laser image Unit is tilting downward without user interaction Pre-programmed holiday song not playing Pre-programmed Christmas song not playing Your unique message is not playing Your unique message is not being saved Your unique saved message is not being played No power. Unit needs to be reset. Projection surface is too dark or there is too much ambient light. Laser is aimed incorrectly. Cold conditions. Hot conditions. Unit is loose on ground stake or stand. Holiday song not selected. Christmas song not selected. Not on right screen. Did not press GO. The message in the #1 position in the Saved Message screen always plays when the unit automatically turns on after being off for 18 hours. Not on right screen. Message not stored properly. Not on right screen. Did not press the Load button. Make sure the main power cord is plugged into a working outlet. Turn main power OFF, wait ten seconds, then turn main power ON. Note the new cycle of 6 hours on followed by 18 hours off will start whenever the unit is turned on. Effect is best achieved at night on a light projection surface. Re-adjust the unit so that it faces the projection surface. Please allow the unit to warm up between 1 to 20 minutes. Over heat protection device activated. Unit will turn on after 15 to 30 minutes of selfcooling. Adjust the unit to desired position and tighten the adjust knob to secure. If using ground stake, make another hole. In the Light Shows screen, select the desired song. In the Light Shows screen, select the desired song. Christmas songs will keep playing sequentially. Press the Message Laser tab at the top middle of the screen. Press GO on the top right of the screen. Use the stylus to select the desired message. 1. Press Save on the top right of the Message Laser screen. The screen will automatically jump to the Saved Message page. 2. Select the desired position from 1 to 10 and press the Store button. 1. Make sure you are on the Saved Message page. Press the tab at the top right of the main screen. 2. Press the Load button and the screen will automatically change to the Message Laser page. Press the GO button to play the message. Holiday Laser Show # Current instructions at Page 7 of 8

8 CARE INSTRUCTIONS 1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation cords, cracks in enclosure, loose connections or exposed wire. 2. When storing the product, carefully remove the product from the current location, including trees, branches or bushes to avoid any undue strain or stress on the conductors, connections and wires. 3. When not in use, store neatly in a cool, dry location protected from sunlight and heat. 4. If necessary, clean product by wiping with a soft, dry cloth. RATING: AC120V~60Hz 12W Holiday Laser Show # Current instructions at Page 8 of 8

Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443

Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery