DATA LOGGER Series SELECTION GUIDE

Transcription

1 DATA LOGGER Series SELECTION GUIDE

2 2 Choose from Hioki s extensive line of loggers that s right for your application. HIOKI Logger Search For multichannel measurement and recording Memory HiLogger series LR LR LR LR Page p.3 p.4 p.5 Channels 10 ch 30 (standard); expandable to up to a maximum of 600 Maximum sampling rate 10 ms 10 ms (up to 15 channels) 10 ms Voltage Temperature (Thermocouples) Temperature (Pt 100, JPt100) N/A N/A Humidity N/A Resistance N/A N/A N/A Pulse (4ch) (8ch) *1 (8ch) *1 (8ch) *1 (15ch) *2 Digital N/A (8ch) *1 (8ch) *1 (8ch) *1 (15ch) *2 External Interface USB USB LAN USB LAN External storage USB memory CF card USB memory CF card CF card Battery N/A parameters *1 Pulse + Digital 8ch(Each channel can be set to either pulse or digital.) *2 Digital/Pulse Unit 8996: 15ch Compact solutions for measuring 1 or 2 channels Data Logger series LR5001 LR5011 LR5031 LR5051 LR5040s parameters and channels range LR6(AA) Alkaline battery 1.5V Temperature 1ch and Humidity 1ch 40.0 to 85.0 C 0% to 100%rh Temperature 1ch Instrumentation 1ch AC Current 2 ch DC Voltage 1ch 40.0 to C DC to ma AC 0.00 to 1000 A LR5041: -50 mv to 50 mv LR5042: -5 V to 5 V LR5043: -50 V to 50 V Power and energy loggers For use in environmental, energy, and power supply management (demand monitoring) applications Detailed catalogs also available Clamp on Power Logger PW Use a power logger to implement energy-saving measures!

3 Memory HiLogger series LR ch 3 Featuring USB flash drive support and improved accuracy! Your Personal 10-channel Logger Memory HiLogger LR Voltage Thermocouple Pulse Key Point Lightest weight in its class and Easy Operation Ten Isolated Analog Input Channels 10ms Sampling and Recording Across All Channels Ultra-compact for convenient portability Noise-resistant measurement circuitry for improved readings Improved thermocouple measurement accuracy and reference junction compensation accuracy Real-time recording to a CF card or USB memory stick Real-time recording of up to 10ms/ sample data to USB or CF memory devices (only the Hioki CF card is guaranteed for correct operation) Small and light enough for the palm of your hand - yet completely isolated Monitor in real-time on the PC using bundled Logger Utility freeware General specifications (product guaranteed for one year) Number of channels parameters Max. allowable input Max. rated voltage to earth Recording intervals Selectable Filters Memory capacity External Interfaces Display Functions Dimensions and mass Analog: 10 isolated channels using scanning input method (M3 mm dia. screw terminal block) Pulse: 4 channels (All pulse inputs share common ground with the main unit) [Voltage] ±100 mv to ±60 V, 1-5V f.s., Max. resolution 5μV [Temperature (Thermocouples)] 200 C to 1800 C (depend on the sensor), Thermocouples (K, J, E, T, N, R, S, B), Max. resolution 0.1 C [Temperature (Pt 100 sensor)] not available [Humidity] not available [Totalized pulses] 0 to 1000M pulse (No-voltage a contact, open collector or voltage input), Max. resolution 1 pulse [Rotation count] 0 to 5000/n (r/s) f.s. (No-voltage a contact, open collector or voltage input), Resolution 1/n (r/s) Note: n = pulses per rotation (1 to 1,000) DC 60 V (Analog input), DC 0 V to 10 V (Pulse input) AC 30 Vrms, DC 60 V (Upper limit voltage that does not cause damage when applied between input channel and chassis, and between each input channels) 10 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval) 50 Hz, 60 Hz, or OFF (digital filtering of high frequencies on analog channels) Internal storage: 3.5 MWords, External storage: CF card or USB memory stick (only the Hioki CF card is guaranteed for correct operation) USB 2.0 mini-b receptacle 1; Functions: Control from a PC, Transfers files from the installed CF card to a PC (cannot transfer files from the connected USB memory stick to a PC via USB communication), Data copy between CF card and USB memory stick 4.3-inch WQVGA-TFT color LCD ( dots) Save data to the CF Card or USB memory stick in real time, Numerical Calculations, etc. AC Adapter Z1005: 100 to 240 VAC (50/60 Hz), Battery Pack 9780: Continuous use 2.5 hours 12 V DC supply: 10 to 16 V (please contact Hioki distributor for cable; less than 3 m/9.84 ft cable length) 176 mm (6.93 in) W 101 mm (3.98 in) H 41 mm (1.61 in) D, 550 g (19.4 oz) (Battery Pack 9780 not installed) Guide 1, CD-R (Instruction Manual PDF, Logger Utility Instruction Manual PDF, Data acquisition application program Logger Utility) 1, USB cable 1, AC Adapter Z Removable storage (CF card) AC Adapter Z1005 (100 to 240 V AC, Supplied ) Battery Pack 9780 (NiMH, Charges while installed) Soft Case 9812 (Includes space for small items, Neoprene rubber) Carrying Case 9782 (Includes compartment for options, Resin coated) Connection Cable 9641 (For pulse inputs, 1.5 m (4.92 ft) length) PC Card 2G 9830 PC Card 1G 9729 PC Card 512M 9728 PC Card 256M 9727 PC Card Precaution Use only PC Cards sold by Hioki. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.

4 4 Memory HiLogger series LR , LR , LR ch to 60ch Portable Data Logger with 30 Standard Channels, Expandible to 60 Channels Memory HiLogger LR , LR , LR Voltage Thermocouple Pt100/JPt100 Resistance Humidity Pulse Digital Protect valuable data in the event of a power outage or other problem with a portable, multichannel logger Key Point Compact size despite 30-channel standard capabilities Write data to USB memory stick or CF card in real-time Protected against unexpected power outages Digital filtering function for enhanced noise immunity All input channels are isolated and high withstand voltage n Enhanced Noise Immunity High-frequency noise is rejected by means of a digital filter. n High withstand voltage Maximum voltage that can be input between terminals: ±100 V DC LR8400 (with built-in Voltage/Temp Unit LR8500 2) LR8401 (with built-in Universal Unit LR8501 2) LR8402 (with built-in LR8500 1, LR8501 1) General specifications (product guaranteed for one year) Analog input Voltage/ Temp Unit LR8500 Analog input Universal Unit LR8501 Note: Isolated from each channel to chassis *Red text: LR8501 only Pulse, Digital input Recording intervals Digital filter Data storage Interfaces voltage between each channels of Universal Unit: 300 V DC voltage between each channels of Voltage/Temp Unit: 250 V DC [No. of channels] 15 analog channels; isolated scanning method input ([LR8500] 2 terminals: M3 screw type, [LR8501] 4 terminals: push-button type) [Voltage] ±10 mv to ±100 V, 1-5 V f.s., Max. resolution: 500 nv Note: Isolated between channels and from each channel to chassis [Temperature (Thermocouples)] -200 C to 2000 C (depends on the sensor), Thermocouples (K, J, E, T, N, R, S, B, W), Max. resolution 0.01 C Note: Isolated between channels and from each channel to chassis [Temperature (Pt 100, JPt 100 sensor)] -200 C to 800 C, Max. resolution 0.01 C Note: Not isolated between channels [Resistance] 0 Ω to 200 Ω f.s., Max. resolution 0.5 mω Note: Not isolated between channels [Humidity] 5.0 to 95.0 % rh (use with the option sensor), resolution 0.1 % rh Note: Not isolated between channels nor from each channel to chassis [Max. rated voltage between isolated input channels] LR8500: 250 V DC, LR8501: 300 V DC [Max. allowable input] ±100 V DC [Max. rated voltage from isolated terminals to ground] 300 V AC, DC [No. of channels] 8 channels, pulse / digital selectable for each channel, M3 screw terminal, not isolated, common ground [Pulse totalization] 0 to 1000 M pulse (No-voltage 'a' contact; normally open, open collector or voltage input), Max. resolution 1 pulse [Pulse revolutions] 0 to 5000 /n (r/s) f.s. (same as Pulse totalization input signal condition), resolution 1/n (r/s) Note: "n" is the number of sensor output pulses per revolution, 1 to 1000 [Digital input] Record logical "1" or "0" at each sampling [Max. rated voltage between input channels] Not isolated [Max. allowable input] 0 to 50 V 10 ms to 50 ms, 100 ms to 1 hour, 19 selections (All input channels are scanned at high speed during every recording interval) Note: limited by using channels at 10 ms to 50 ms interval Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set) Internal memory: 8 M-words, Data storage media: CF card or USB memory (Only data recorded to a genuine Hioki CF card is guaranteed) [LAN] 100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, HTTP server function, or system Note: LAN communication support planned from software Ver [USB] USB 2.0 High-speed capable, series mini-b receptacle Functions: Data acquisition using bundled software or PC commands, Transfer data from the CF card to a PC via USB drive mode Note: Data transfer not possible from USB memory sticks 5.7 inch TFT color liquid crystal display ( pixel) Save waveform data in real time to the CF card or USB memory stick, Numerical value calculations, Waveform calculations, and others AC Adapter : 100 to 240 V AC (50/60 Hz), Battery Pack Z1000: Continuous use 5 h, External power: 10 to 28 V DC 272 mm (10.71 in) W mm (7.18 in) H 66.5 mm (2.62 in) D, 1.8 kg (63.5 oz), (LR main unit, excluding the Battery Pack 370 g/ 13.1 oz) Display device Functions Dimensions and mass Detailed operating manual 1, guide 1, AC Adapter , USB cable 1, CD-R (data collection software "Logger Utility") 1 Voltage/Temp Unit LR8500 (2 terminals M-3 mm screw type, 15 channels Voltage, Temperature with thermocouple, or Humidity measurement) Universal Unit LR8501 (4 terminals push-button type, 15 channels Voltage, Temperature with thermocouple, Platinum Resistance temperature sensor, Humidity, or Resistance measurement) Humidity Sensor Z2000 (3 m (9.84 ft) length) Battery Pack Z1000 (NiMH, Charges while installed) AC Adapter (100 to 240 V AC, Bundled with the LR8400, LR8401 and LR8402) LAN Cable 9642 (Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length) Carrying Case C1000 (Includes compartment for options) Fixed Stand Z5000 (For wall hanging and slanted bench mounting) Maximum rated voltage to earth: 300 V AC/DC Removable storage (CF card) PC Card 2G 9830 PC Card 1G 9729 PC Card 512M 9728 PC Card 256M 9727 PC Card Precaution Use only PC Cards sold by Hioki. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.

5 Memory HiLogger series ch to 600ch 5 Up to 600 Channels of Data Logging Memory HiLogger 8423 Voltage Thermocouple Pt100/JPt100 Humidity Pulse Digital Key Point Mix and match input units to build a measurement system with up to 600 channels. More robust isolation: 600 V terminal-to-ground, 200 V/120 V channel-to-channel Capture data with 15 to a maximum of 600 channels USB 2.0, LAN 100BASE-TX, Store to 1GB PC Card Dual sampling to make efficient use of available memory n Enhanced Noise Immunity Memory HiLogger 8423 Maximum number of connectable units: 8 Voltage/Temp Unit channles, Voltage, Thermocouple input Enhanced noise immunity reduces the impact of switching noise from inverterequipped devices and 50/60 Hz hum noise. Universal Unit channels, Voltage, Thermocouple, Resistance temperature sensor, Humidity measurement Digital/Pulse Unit channels, ON/OFF logic signal, Totalized pulses (integrated or instantaneous), Rotation count Alarm Unit channels, Open-collector output General specifications (product guaranteed for one year) n High withstand voltage voltage to earth: 600V AC, DC voltage to earth between each module: 600V AC, DC voltage between each channel: 200V DC 200V in model V in model 8949 No. of connectable units parameters Model 8948 parameters Model 8949 parameters Model 8996 Recording intervals Functions Maximum 8 units (total 120 channels), Bundle 8 Modules together to achieve a 120-channel System, Bundle 5 Systems together to enable a maximum of 600 channels of simultaneous recording [Voltage] ±150mV to ±100V, 1-5V f.s., Max. resolution 5µV, Max. allowable input : DC 100V, Max. rated voltage between channels : 200 V DC, Max. rated voltage to earth : 600 V DC, AC [Temperature (Thermocouples)]: -200 C to 2000 C (depend on the sensor), Thermocouples(K, E, J, T, N, W (Wre5-26), R, S, B), Max. resolution 0.01 C [Voltage] ±150mV to ±60V, 1-5V f.s., Max. resolution 5µV, Max. allowable input : DC 60V, Max. rated voltage between channels : 120 V DC, Max. rated voltage to earth : 600 V DC, AC [Temperature (Thermocouples)] -200 C to 2000 C (depend on the sensor), Thermocouples(K, E, J, T, N, W (Wre5-26), R, S, B), Max. resolution 0.01 C [Temperature (Pt 100, JPt 100 sensor)] -200 C to 800 C, Max. resolution 0.01 C [Humidity] 5.0 to 95.0% rh (use with the option sensor), 0.1% rh resolution [Totalized pulses] 0 to 1000M pulse, Max. resolution 1 pulse [Rotation count] 0 to 5000/n (r/s) f.s., Resolution 1/n (r/s) Note: n = pulses per rotation (1 to 1,000) [Digital input] ON/OFF digital signal [Max. allowable input] DC 50V, Max. rated voltage between channels : 33V AC, 70V DC, Max. rated voltage to earth : 600 V DC, AC, (Upper limit voltage that does not cause damage when applied between CH-1 to CH-5 each channel and chassis, CH-6 to CH-10 each channel and chassis, CH-11 to CH-15 each channel and chassis, and between each UNITs), (common ground for CH-1 to CH-5, common ground for CH-6 to CH-10, common ground for CH-11 to CH-15) 10ms to 1hr, 19 range (5s to 1hr when combined with humidity measurement), Dual sampling : Recording intervals can be specified for every input module (high-speed and low-speed) data are saved to the CF Card in real time, Trigger function, Digital filter (Input unit), Alarm output (use with the Alarm Unit 8997), Data acquisition is controlled by the PC data acquisition program, FTP server function, HTTP server function [LAN] supports 100Base-TX, [USB] Ver 2.0, mini-b receptacle, CF card slot AC Adapter : 20 VA (when connected with 8 units), External power: 9.6 to 15.6 V DC, Please contact Hioki for connection cord Interfaces Dimensions and mass 67 mm (2.64 in) W 133 mm (5.24 in) H 125 mm (4.92 in) D, 600 g (21.2 oz) (main unit 8423 only) Operating Manual 1, Quick Start Manual 1, AC Adapter , USB cable 1, Connection Plate 1, CD-R (data collection software "Logger Utility") 1, Connector cover 1, Ferrite clamp 1 AC Adapter (Supplied as standard, 100 to 240 V AC, Supplied ) LAN Cable 9642 (Straight Ethernet cable, supplied with straight to cross conversion adapter, 5 m (16.41 ft) length) Connection Cable 9683 (For synchronization, cable length 1.5m (4.92ft)) Humidity Sensor 9701 (1-channel, for UNIVERSAL UNIT 8949) Removable storage (CF card) PC Card 1G 9729 PC Card 512M 9728 PC Card 256M 9727 PC Card Precaution Use only PC Cards sold by Hioki. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.

6 6 Data Logger series LR5000 Series Temperature Humidity Record Temperature and Humidity Simultaneously Humidity Logger LR5001 items Temperature 1ch and Humidity 1ch range [Temperature] -40 C to 85 C [Humidity] 0% to 100%rh Accuracy See figure at lower right. Waterproof and IP54 (splash-proof construction) (with sensor connected, excluding sensor tip) dustproof -20 C(-4 F) to 70 C(158 F), 80%rh or less (non-condensating) LR6 (AA) Alkaline battery 1.5V 1 Case 1 : Approx. 3 months Case 2: Approx. 20 days Dimensions and mass Approx. 79mm(3.11in)W 57mm(2.24in) H 28mm(1.10in)D, 105g(3.7oz) Humidity Sensor LR9504 1, Kickstand, LR6 (AA) Alkaline battery 1.5V 1, Instruction manual 1, Operation manual 1 Temperature range : C to 85.0 C (-40 F to 185 F) Humidity range : 0.0%rh to 100.0%rh Response time : Approx. 300 seconds (Temperature ; 90% response time) Waterproofness: None Sensor head size : 13mm 30mm (0.51in 1.18in) Humidity Sensor LR9501 (1m) Humidity Sensor LR9502 (5m) Humidity Sensor LR9503 (10m) Humidity Sensor LR9504 (40mm) n Humidity (LR5001+Sensor) * ±10 %rh ±10 %rh ±8 %rh 70 Relative humidity : %rh ±10 %rh ±15 %rh ±8 %rh* ±8 %rh ±6 %rh ±8 %rh * 50 ±6 * %rh ±6 %rh ±5 %rh ±6 %rh Temperature : C *Values provided for reference only. n Temperature (LR5001+Sensor) C up to (not including) 0.0 C ±1.0 C 0.0 C up to (not including) 35.0 C ±0.5 C 35.0 C up to (not including) 70.0 C ±1.0 C 70.0 C to 85.0 C ±2.0 C Measure Temperature with External Sensor Temperature Logger LR5011 items Temperature 1ch range C to 180 C Note: Depends on measurement range of sensor C up to (not including) 0.0 C: ±1.0 / 0.0 C up to (not including) 35.0 C: ±0.5 / Accuracy 35.0 C up to (not including) 70.0 C: ±1.0 / 70.0 C up to (not including) C: ±2.0 / C to C: ±5.0 Waterproof and IP54 (splash-proof construction) (with sensor connected, excluding sensor tip) dustproof -20 C(-4 F) to 70 C(158 F), 80%rh or less (non-condensating) LR6 (AA) Alkaline battery 1.5V 1 Case 1 : Approx. 2 years Case 2: Approx. 2 months Dimensions and mass Approx. 79mm(3.11in)W 57mm(2.24in) H 28mm(1.10in)D, 105g(3.7oz) LR6 (AA) Alkaline battery 1.5V 1,Kickstand, Instruction manual 1, Operation manual 1 Molded plastic type Temperature range: -40 C to 180 C (-40 F to 356 F) Response time : Approx. 100 seconds (90% response time) Waterproofness : Watertight JIS C 0920 (when attached to logger) Sensor head size: Ø6mm 28mm (0.24in 1.10in) Lug type Temperature range: -30 C to 180 C (-22 F to 356 F) Response time : Approx. 45 seconds (90% response time) Waterproofness : Watertight JIS C 0920 (when attached to logger) Diameter: Outer: 7mm (0.26in) Inner: 3.2mm (0.13in) Sheathed type Temperature range: -40 C to 120 C (-40 F to 248 F) Response time : Approx. 90 seconds (90% response time) Waterproofness : Watertight JIS C 0920 (when attached to logger) Sensor head size: Ø4mm 180mm (0.16in 7.09in) Needle type Temperature range: -40 C to 120 C (-40 F to 248 F) Response time : Approx. 20 seconds (90% response time) Waterproofness : Watertight JIS C 0920 (when attached to logger) Sensor head size: Ø1.3mm 25mm (0.05in 0.98in) Temperature Sensor LR9601 (1m) Temperature Sensor LR9602 (5m) Temperature Sensor LR9603 (10m) Temperature Sensor LR9604 (45mm) Temperature Sensor LR9611 (1m) Temperature Sensor LR9612 (5m) Temperature Sensor LR9613 (10m) Temperature Sensor LR9621(1m) Temperature Sensor LR9631 (1m)

7 Data Logger series LR5000 Series Instrumentation DC Voltage AC Current 7 Record 4-20 ma Instrumentation Signals, etc. Instrumentation Logger LR5031 items For instrumentation / 0 to 20mA DC, 1ch range DC to 30.00mA Basic Accuracy ±0.5%rdg. ±5dgt. (@23 C±5 C) Waterproof and IP54 (splash-proof construction) (with sensor connected, excluding sensor tip) dustproof -20 C(-4 F) to 70 C(158 F), 80%rh or less (non-condensating) LR6 (AA) Alkaline battery 1.5V 1 Case 1 : Approx. 2 years Case 2: Approx. 2 months Dimensions and mass Approx. 79mm(3.11in)W 57mm(2.24in) H 28mm(1.10in)D, 105g(3.7oz) Connection Cable LR9801 1, Kickstand LR6 (AA) Alkaline battery 1.5V 1, Instruction manual 1, Operation manual 1 Record Instrumentation Signals and Measure Analog Output from Sensors and other Devices Voltage Logger LR5041, LR5042, LR5043 LR5041 LR5042 LR5042 items DC voltage 1ch range mV to 50.00mV V to 5.000V V to 50.00V Basic Accuracy ±0.5%rdg. ±5dgt. (@23 C±5 C) Waterproof and dustproof IP54 (splash-proof construction) (with sensor connected, excluding sensor tip) -20 C(-4 F) to 70 C(158 F), 80%rh or less (non-condensating) LR6 (AA) Alkaline battery 1.5V 1 Case 1 : Approx. 2 years Case 2: Approx. 2 months Dimensions and mass Approx. 79mm(3.11in)W 57mm(2.24in) H 28mm(1.10in)D, 105g(3.7oz) Connection Cable LR9802 1, Kickstand LR6 (AA) Alkaline battery 1.5V 1, Instruction manual 1, Operation manual 1 Easily Record Load Current of 50Hz/60Hz lines and Leak Current Clamp Logger LR5051 items AC Current (2 channels) When Using 9669 :1000A range When Using CT6500 :50.00A/ 500.0A range range When Using :5.000A/ 50.00A range When Using 9675 :500.0mA/ 5.000A range When Using :500.0mA/ 5.000A range Basic Accuracy ±0.5%rdg. ±5dgt.+Clamp sensor accuracy -0 C(32 F) to 50 C(122 F), 80%rh or less (non-condensating) LR6 (AA) Alkaline battery 1.5V 2 Case 1 : Approx. 1 years Case 2: Approx. 1 months Dimensions and mass Approx. 79mm(3.11in)W 70mm(2.76in) H 37mm(1.46in)D, 165g(5.8oz) LR6 (AA) Alkaline battery 1.5V 2 Instruction manual 1, Operation manual 1 Clamp on Sensor Connection Cable 9219 required (sold separately) Clamp on Leak Sensor Measurable conductor diameter 9669 CT Ø55mm(2.17") or less, 80(3.15") 20(0.79") mm busbar Ø46mm(1.81") or less Ø15mm(0.59") or less Ø30mm(1.18") Ø40mm(1.57") Primary current rating 1000A AC 500A AC 50A AC 10A AC 10A AC LR5051 range(s) 1000A 50.00/500.0A 5.000/50.00A 500.0mA/5.000A 500.0mA/5.000A Accuracy(45Hz to 66Hz) ±1.0%rdg. ±0.01%rdg. ±1.5%rdg. ±0.03%rdg. ±0.3%rdg. ±0.02%rdg. ±1.0%rdg. ±0.005%rdg. ±1.0%rdg. ±0.05%rdg. voltage to earth 600Vrms 600Vrms 300Vrms 300Vrms 300Vrms

8 Data Logger series LR5000 Series Shared specifications and options LR5000 Series common specifications (product guaranteed for one year) Recording interval 1/ 2/ 5/ 10/ 15/ 20/ 30 seconds, 1/ 2/ 5/ 10/ 15/ 20/ 30/ 60 minutes Recording methods Recording modes Storage capacity Display items Recording start/ stop Data backup Interfaces [One time recording] Stop recording when the memory capacity is full. [Endless recording] Continue recording even when the memory capacity is full. (Old data is overwritten.) [Instantaneous recording] Instantaneous values are recorded at every recording interval. [Statistical value recording] Measure at one second intervals, and record the instantaneous, maximum, minimum, and average values within every recording interval. [Instantaneous value mode] 60,000 data sets per channel [Statistical value mode] 15,000 data sets per channel Measured value, Interval configration, Date, Time, Alarm, Remaining battery power, Number of data, Maximum data, Minimum data [Recording start] Manual start, Timer start [Recording stop] Manual stop, Timer stop, When the memory capacity is full (One time recording) Data from the last recording session is always backed up. Infrared optical communications with LR5091, LR During battery replacement, recording and clock operations are preserved for about 30 seconds. (Recording operation continues if the battery is replaced within about 30 seconds.) Note: With the LR5001, recording is interrupted during battery replacement if the battery is very weak. After batteries are replaced, recording resumes automatically. Previously recorded data is not lost during battery replacement. LR5000 Series common options Magnetic Strap Z5004 Can be positioned at an angle with the included stand. (included, except for Model LR5051) Wall-mounted Holder LR9901 *Not compatible with Model LR5051 Transfer data from Data Logger to PC Communication Adapter LR5091 Data Collector LR Communication Adapter LR5091 USB Connect the Data Collector to a computer after downloading the measurement data to its internal memory. USB HEADQUARTERS: 81 Koizumi, Ueda, Nagano, , Japan TEL FAX / os-com@hioki.co.jp HIOKI USA CORPORATION: TEL FAX / hioki@hiokiusa.com Data collection method Connect the Communication Adapter to a computer and then place a datamini in the cradle. Data Collector LR Bring the Data Collector to the measurement site and collect data. Download the measurement data onto an SD card and then insert the card into a computer. LR5091 specifications HIOKI (Shanghai) SALES & TRADING CO., LTD.: TEL FAX / info@hioki.com.cn HIOKI INDIA PRIVATE LIMITED: TEL FAX hioki@hioki.in HIOKI SINGAPORE PTE. LTD.: TEL FAX info@hioki.com.sg Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies. HIOKI KOREA CO., LTD.: TEL FAX info-kr@hioki.co.jp Transfer data from a Data logger to a PC Features Transfer Data Logger configurations or clock settings from a PC to the Data Logger Interface with Data Logger Infrared optical communications Interface with PC USB2.0, Full Speed, Series Mini B Receptacle Operating environment Indoors DC5V (USB bus power) power 0.5VA 0 C(32 F) to 40 C(104 F), 80%rh or less (non-condensating) Dimensions, Mass Approx. 83mm(3.27 in)w 61mm(2.40in)H 19mm(0.75in)D, 43g(1.5oz) USB cable (1m) 1, CD (Application software "LR5000 Utility") 1 LR specifications Collect recorded data from the Data Logger to internal memory or SD memory card View collected data in a graph Transfer Data Logger configurations or clock settings from internal Features memory or SD memory card to the Data Logger Transfer data from a Data Logger to a PC Transfer Data Logger configurations or clock settings from a PC to the Data Logger Interface with Data Logger Infrared optical communications Interface with PC USB2.0, Full Speed, Series Mini B Receptacle Clock functions Auto calender, auto leap year Display Dot-matrix LCD ( dots) Data Logger configurations (Interval, Start/Stop method, Recording mode, Display items Scaling, Alarm, Power-saving mode, Clock, Range) Collected data (Record list, Maximum data, Minimum data, Average, Graph, Value) Internal memory [Instantaneous value mode] 60,000 data elements 16ch capacity of data [Statistical value mode] 15,000 data elements 16ch Removable storage media SD memory card, Save data and configurations Operating environment Indoors DC3V (LR6 (AA) Alkaline battery 1.5V 2) or DC5V (USB bus power) power 1VA Approx. 12 hours or 500 times of data collection 0 C(32 F) to 40 C(104 F), 80%rh or less (non-condensating) Dimensions, Mass 91mm(3.58in)W 141mm(5.55in)H 31mm(1.22in)D, 215g(7.6oz) (excluding batteries) Instruction manual 1, Operation manual 1, LR6 (AA) Alkaline battery 1.5V 2, USB cable(1m) 1, CD (Application software "LR5000 Utility") 1 DISTRIBUTED BY Analyze data with the included software application All information correct as of May. 21, All specifications are subject to change without notice. Series_LoggersE1-35E Printed in Japan