USB Bootloader GUI User s Guide
|
|
|
- Darren Shields
- 6 years ago
- Views:
Transcription
1 Freescale Semiconductor User s Guide Document Number: MC9S08JS16UG Rev. 0, 10/2008 USB Bootloader GUI User s Guide by: Derek Liu Applications Engineering China 1 Overview The MC9S08JS16 (JS16) supports the USB bootloader used to upgrade the firmware via the USB interface. Freescale provides a complete solution for the JS16 USB bootloader. Contents 1 Overview Install the Bootloader GUI Install the Driver for the New Bootloader Device Download the Firmware Using the Bootloader JS16 Bootloader GUI Update JS16 Firmware with USB Bootloader This document describes how to install the USB bootloader GUI to your computer and how to use the GUI to upgrade and download the firmware. NOTE This user s guide is based on the JS16. It can also apply to JS8 with the difference noted in the context. Freescale Semiconductor, Inc., All rights reserved.
2 Install the Bootloader GUI 2 Install the Bootloader GUI The USB bootloader GUI is used to communicate with the boot code in ROM to implement the firmware update and download process. NOTE The bootloader GUI can only be installed on a PC with Windows XP TM (SP2 or later version) operating system. The.NET2.0 or later version must be ready before the installation. If the bootloader GUI installer can not detect the.net2.0 installed it then connects to the website to download and install it. In this user guide it is assumed the.net2.0 has been installed. The following steps installs the bootloader GUI: 1. Double click the setup.exe to start the installation (Figure 1). The installation window in Figure 2 appears. Figure 1. Start the Installation Figure 2. JS Family Bootloader Installation Window 2. Click the Next button in this window (Figure 2). Users can set the destination folder by clicking the Browse button in the window shown in Figure 3. 2 Freescale Semiconductor
3 Install the Bootloader GUI Figure 3. Change the Installation Path 3. Click the Next button in the same window (Figure 3) and the License Agreement page is displayed. To continue with the installation select I Agree. Figure 4. License Agreement Freescale Semiconductor 3
4 Install the Bootloader GUI 4. Click the Next button in the License Agreement (Figure 4). The installation wizard begins to copy the files to the folder configured in step 2 (Figure 5). Figure 5. Installing the Bootloader 5. In the rest of the installation process the bootloader s USB driver (WinUSB) will be installed in the system. The dialog in Figure 6 appears after the process is completed. Figure 6. Agreement for installation of USB driver The user must select I Agree to continue with the installation (Figure 6). 4 Freescale Semiconductor
5 Install the Bootloader GUI Figure 7. Select the USB Driver Installation Path 6. After the user sets the USB driver installation path (Figure 7), the installation wizard begins to copy the USB driver files to the destination folder (Figure 8). Figure 8. Copying the USB Driver Files Freescale Semiconductor 5
6 Install the Bootloader GUI Figure 9. USB Driver Installation Completed Figure 10. All Installations Completed 7. After the USB driver files are all copied to the destination folder a dialog is displayed as in Figure 9. To close the USB driver installation click the Close button and a dialog is then displayed see Figure 10. This indicates that the installation process has been completed. 6 Freescale Semiconductor
7 Install the Driver for the New Bootloader Device 3 Install the Driver for the New Bootloader Device Each time the USB port of a PC is connected with a new USB device the PC needs to install the driver. The following steps installs the driver: 1. Attach the USB device to the PC Connect the mini-usb port on the demo board to the USB port on the PC with a USB cable. 2. Power on the demo board Press the PTG0 (BLMS) button and hold it down while the demo board is powered on. This forces the JS16 to enter boot mode. 3. Wait for detection by the PC When the JS16 enters boot mode it is detected by the PC. The PC then prompts Found New Hardware message (Figure 11). Figure 11. Detecting JS Family Bootloader After this message is displayed the Found New Hardware Wizard window appears (Figure 12). Figure 12. Install the Bootloader Driver Automatically 4. Install the USB bootloader driver Select Install the software automatically and click the Next button (Figure 12). The installation process then begins (Figure 13). Freescale Semiconductor 7
8 Install the Driver for the New Bootloader Device Figure 13. Installing the JS Bootloader 5. Complete the installation After the installation is complete click the Finish button to close the wizard (Figure 14). The message in Figure 15 is displayed if the installation is successful. Figure 14. Complete the USB Driver Installation 8 Freescale Semiconductor
9 Download the Firmware Using the Bootloader Figure 15. USB Bootloader is ready If the device has been installed successfully users can find the Freescale JS Family Bootloader in the Microsoft Windows device manager(figure 16). Figure 16. USB Bootloader in Device Manager 4 Download the Firmware Using the Bootloader 4.1 JS16 Bootloader GUI After the JS16 USB driver has been installed the user can open the bootloader GUI from Start > Programs > Freescale > JS family bootloader > JS family bootloader 1.0. The GUI is then displayed on screen. See Figure 17. If the JS16 is connected to the PC and is in boot mode the USB symbol in the notification area of the task bar appears green. See Figure 15. This means the JS16 bootloader is working properly otherwise this symbol appears red. Freescale Semiconductor 9
10 Download the Firmware Using the Bootloader The GUI has the following items: s19 file loader Click the button on the left side of the screen to select the s19 file to be downloaded later to the JS16 MCU. See Figure 17. Figure 17. JS16 Bootloader GUI Bootloader command list Mass erase JS16 flash module executes mass erase command. All the content in the flash space is erased. Partial erase JS16 flash module executes partial erase command. All the content in the flash except that from 0xC000 to 0xC3FF (0xE000 to 0xE3FF for JS8) is erased. Program Write the s19 file selected to the JS16 flash. Reset Reset the JS16 MCU. Auto Execute the Partial Erase, Program, and Reset commands automatically. Status window Displays the operating status 4.2 Update JS16 Firmware with USB Bootloader The user can update the firmware step by step, or by using the auto command. 10 Freescale Semiconductor
11 4.2.1 Update the JS16 Firmware Step by Step Download the Firmware Using the Bootloader Take the following actions to update the JS16 firmware step by step. This process has been verified on the JS16 demo board. 1. Connect the demo board to the PC. Power on the demo board with the button labeled PTG0 pressed at the same time. The JS16 then enters the bootloader mode. 2. Open the bootloader GUI (Start > Programs > Freescale > JS Family Bootloader > JSFamily Bootloader V1.0). The USB icon on the bottom right of the bootloader GUI is green. 3. Select the s19 file Click the button of the s19 file loader to open the file select dialog. Then select the s19 file. See Figure 18. Figure 18. Select s19 file 4. Mass erase the flash Click the Mass Erase button to erase all flash memory. 5. Program the flash Click Program button to burn the code in the s19 file to the JS16 flash. 6. Reset the MCU After the program process is finished click the Reset button to reset the MCU. Freescale Semiconductor 11
12 Download the Firmware Using the Bootloader Update Automatically 1. Obey the same procedure in steps 1, 2, and 3 in Section 4.2.1, Update the JS16 Firmware Step by StepClick the Auto button to execute the partial erase, program, and reset commands. The update process is executed automatically (Figure 19). Figure 19. Execute Auto Command NOTE The partial erase is enabled only when the value of the flash partial erase semaphore (located at 0xFFBE) is 0x00. When the MC9S08JS16 chip is shipped from Freescale the default value of the flash partial erase semaphore is 0xFF. The user cannot use update automatically for the first update. The user can clear the value of the flash partial erase semaphore by adding the following line in the code: const = 0x00; After the flash partial erase semaphore is cleared the user can use the auto command in the GUI bootloader. NOTE The partial erase of the USB bootloader can erase only the content from 0xC400 0xFFFF (0xE400-0xFFFF for JS8). If the firmware code is in the area of 0xC000 to 0xC3FF (0xE000 to 0xE3FF for JS8), error occurs in the partial erase process. 12 Freescale Semiconductor
13 THIS PAGE IS INTENTIONALLY BLANK Freescale Semiconductor 13
14 How to Reach Us: Home Page: Web Support: USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL East Elliot Road Tempe, Arizona or Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen Muenchen, Germany (English) (English) (German) (French) Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo Japan or support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado or Fax: LDCForFreescaleSemiconductor@hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals, must be validated for each customer application by customer s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. RoHS-compliant and/or Pb-free versions of Freescale products have the functionality and electrical characteristics as their non-rohs-compliant and/or non-pb-free counterparts. For further information, see or contact your Freescale sales representative. For information on Freescale s Environmental Products program, go to Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. Freescale Semiconductor, Inc All rights reserved. Document Number: MC9S08JS16UG Rev. 0 10/2008
Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t
Freescale Semiconductor Application Note Document Number: AN3819 Rev. 0.0, 02/2009 Methods for Upgrading Freescale BeeStack Codebases 1 Introduction This note describes how to upgrade an existing Freescale
Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)
Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME
MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007
Freescale Semiconductor Quick Start Guide Document Number: MC33696MODUG Rev. 0, 05/2007 MC33696MODxxx Kit by: Laurent Gauthier Toulouse, France 1 Overview This document provides introductory information
Electrode Graphing Tool IIC Driver Errata Microcontroller Division
Freescale Semiconductor User Guide Addendum TSSEGTUGAD Rev. 1, 03/2010 Electrode Graphing Tool IIC Driver Errata by: Microcontroller Division This errata document describes corrections to the Electrode
MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations
Freescale Semiconductor Engineering Bulletin Document Number: EB711 Rev. 0, 05/2009 MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations by: Peter Kardos Application Engineer, Roznov
PCB Layout Guidelines for the MC1321x
Freescale Semiconductor Application Note Document Number: AN3149 Rev. 0.0, 03/2006 PCB Layout Guidelines for the MC1321x 1 Introduction This application note describes Printed Circuit Board (PCB) footprint
MC56F825x/MC56F824x (2M53V) Chip Errata
Freescale Semiconductor MC56F825XE_2M53V Chip Errata Rev. 1, 05/2012 MC56F825x/MC56F824x (2M53V) Chip Errata The following errata items apply to devices of the maskset 2M53V. 2012 Freescale Semiconductor,
EchoRemote Evaluation Software for Windows
Freescale Semiconductor Application Note Document Number: AN2953 Rev.1, 05/2007 EchoRemote Evaluation Software for Windows 1 Overview EchoRemote is a Microsoft Windows program that communicates with the
Using the PowerQUICC II Auto-Load Feature
Freescale Semiconductor Application Note Document Number: AN3352 Rev. 0, 01/2007 Using the PowerQUICC II Auto-Load Feature by David Smith/Patrick Billings Field Application Engineering/DSD Applications
Component Development Environment Installation Guide
Freescale Semiconductor Document Number: PEXCDEINSTALLUG Rev. 1, 03/2012 Component Development Environment Installation Guide 1. Introduction The Component Development Environment (CDE) is available as
MPC8349E-mITX-GP Board Errata
Freescale Semiconductor Document Number: MPC8349EMITX-GPBE Rev. 2, 01/2007 MPC8349E-mITX-GP Board Errata This document describes the known errata and limitations of the MPC8349E-mITX-GP reference platform.
MTIM Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4160 Rev. 0, 8/2010 MTIM Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group India IDC MSG NOIDA 1 Introduction
Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5
Freescale Semiconductor Application Note Document Number: AN3417 Rev. 0.1, 01/2010 Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 by: Power Management and Audio
etpu General Function Set (Set 1) David Paterson MCD Applications Engineer
Freescale Semiconductor Application Note Document Number: AN2863 Rev. 0, 12/2007 etpu General Function Set (Set 1) by David Paterson MCD Applications Engineer 1 Introduction This application note complements
Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN2855 Rev. 0, 2/2008 Pad Configuration and GPIO Driver for MPC5500 by: Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride
ColdFire Convert 1.0 Users Manual by: Ernest Holloway
Freescale Semiconductor CFCONVERTUG Users Guide Rev.0, 09/2006 ColdFire Convert 1.0 Users Manual by: Ernest Holloway The ColdFire Convert 1.0 (CF) is a free engineering tool developed to generate data
Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen
Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains
Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages
Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series
Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes
SGTL5000 I 2 S DSP Mode
Freescale Semiconductor Application Note Document Number: AN3664 Rev. 2, 11/2008 SGTL5000 I 2 S DSP Mode by Name of Group Freescale Semiconductor, Inc. Austin, TX 1 Description SGTL5000 supports multiple
56F8300 BLDC Motor Control Application
56F8300 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300BLDCQETD Rev. 2 08/2005 freescale.com Document
Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz
Freescale Semiconductor Application Note Document Number: AN4306 Rev. 0, 05/2011 Using the ColdFire+ Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction The ColdFire+ family
Using the Multi-Axis g-select Evaluation Boards
Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application
MPR083 Proximity Evaluation Kit User s Guide
Freescale Semiconductor User s Guide Rev 2, 04/2008 MPR083 Proximity Evaluation Kit User s Guide by: Laura Salhuana Introduction This guide will aid you in connecting the MPR083 Evaluation Kit Board to
16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland
Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller
Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices
Freescale Semiconductor Application Note Document Number: AN3781 Rev. 0, 06/2009 Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices This application
Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller David Paterson MCD Applications, East Kilbride
Freescale Semiconductor Application Note Document Number: AN3256 Rev. 2, 2/2008 Interfacing MPC5xx Microcontrollers to the MFR4310 FlexRay Controller by: David Paterson MCD Applications, East Kilbride
1 Introduction. 2 Problem statement. Freescale Semiconductor Engineering Bulletin. Document Number: EB727 Rev. 0, 01/2010
Freescale Semiconductor Engineering Bulletin Document Number: EB727 Rev. 0, 01/2010 Enabling and Disabling ECC on MC9S08DE60/MC9S08DE32 Microcontrollers by: Philip Drake, 8-Bit Systems and Applications
Using the Project Board LCD Display at 3.3 volts
Freescale Semiconductor SLK0100AN Application Note Rev. 0, 1/2007 By: John McLellan Applications Engineering Austin, TX 1 Introduction This document guides you through the steps necessary to use the LCD
Using the Kinetis Family Enhanced EEPROM Functionality
Freescale Semiconductor Application Note Document Number: AN4282 Rev. 1, 03/2015 Using the Kinetis Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction Some of the Kinetis
Integrating the MC9S08JS16/8 USB Bootloader to Your Application
Freescale Semiconductor Application Note Document Number: AN3958 Rev. 0, 10/2009 Integrating the MC9S08JS16/8 USB Bootloader to Your Application by: Derek Liu Application Engineer Freescale provides the
MCF5445x Configuration and Boot Options Michael Norman Microcontroller Division
Freescale Semiconductor Application Note Document Number: AN3515 Rev. 1, 04/2008 MCF5445x Configuration and Boot Options by: Michael Norman Microcontroller Division 1 Configuration Modes The Freescale
Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis
Freescale Semiconductor Document Number: AN4307 Application Note Rev. Rev.0, 5/ 2011 Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis by: Paolo Alcantara RTAC Americas Mexico 1 Introduction This
MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents
Freescale Semiconductor Reliability & Qualifications RQA33897 Rev. 2.0, 8/2006 MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents The device(s) in this document successfully completed
HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H
Freescale Semiconductor Engineering Bulletin EB664 Rev. 6, 08/2006 HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H by: Devaganesan Rajoo HC12
IIC Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4158 Rev. 0, 8/2010 IIC Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
MPR121 Jitter and False Touch Detection
Freescale Semiconductor Application Note Rev 1, 03/2010 MPR121 Jitter and False Touch Detection INTRODUCTION Touch acquisition takes a few different parts of the system in order to detect touch. The baseline
Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families
Freescale Semiconductor Application Note Document Number: AN4302 Rev. 0, 04/2011 Introduction to the S12G Family EEPROM Including a Comparison between the S08DZ, S12XE, and S12P Families by: Victor Hugo
Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer
Freescale Semiconductor Application Note Rev 1, 06/2007 Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer by: Kimberly Tuck Accelerometer Systems and Applications Engineering Tempe,
Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation
Freescale Semiconductor Application Note AN3865 Rev. 1.0, 2/2010 Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation 1 Overview
Using IIC to Read ADC Values on MC9S08QG8
Freescale Semiconductor Application Note AN3048 Rev. 1.00, 11/2005 Using IIC to Read ADC Values on MC9S08QG8 by Donnie Garcia Application Engineering Microcontroller Division 1 Introduction The MC9S08QG8
PDB Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4163 Rev. 0, 8/2010 PDB Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Migrating from the MPC852T to the MPC875
Freescale Semiconductor Application Note Document Number: AN2584 Rev. 1, 1/2007 Migrating from the MPC852T to the MPC875 by Ned Reinhold NCSD Applications Freescale Semiconductor, Inc. Austin, TX This
etpu Automotive Function Set (Set 2)
Freescale Semiconductor Application Note Document Number: AN3768 Rev. 0, 05/2009 etpu Automotive Function Set (Set 2) by: Geoff Emerson East Kilbride U.K. 1 Introduction This application note complements
56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers
56F805 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805BLDCQETD Rev. 08/2005 freescale.com BLDC Motor Control
MPR121 Proximity Detection
Freescale Semiconductor Application Note Rev 0, 03/2010 MPR121 Proximity Detection INTRODUCTION MPR121 is a feature rich, second generation touch sensor controller after Freescale s initial release of
MCF54451, MCF54452, MCF54453, MCF54454,
Chip Errata MCF54455DE Rev. 5, 8/21 MCF54455 Chip Errata Revision: All Supports: MCF5445, MCF54451, MCF54452, MCF54453, MCF54454, and MCF54455 Summary of MCF5445x Errata The latest mask of the MCF5445x
Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller Robert Moran MCD Applications, East Kilbride, Scotland
Freescale Semiconductor Application Note Document Number: AN3269 Rev. 3, 02/2010 Interfacing MPC5500 Microcontrollers to the MFR4310 FlexRay Controller by: Robert Moran MCD Applications, East Kilbride,
MPC8260 IDMA Timing Diagrams
Freescale Semiconductor Application Note Document Number: AN2177 Rev. 4, 07/2006 MPC8260 IDMA Timing Diagrams By DSD Applications, NCSG Freescale Semiconductor, Inc. The MPC8260 PowerQUICC II integrated
Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration
Symphony SoundBite: Quick Start with Symphony Studio Installation and Configuration Document Number: DSPB56371UGQS Rev. 2 September 2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com
Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series
Freescale Semiconductor Document Number: AN4590 Application Note Rev 0, 9/2012 Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series by: Lukas Vaculik Rožnov pod Radhoštem Czech Republic 1 Introduction
MC33794 Touch Panel System Using E-Field Sensor Setup Instructions
Freescale Semiconductor MC33794SIUG User s Guide Rev. 1.0, 09/2005 MC33794 Touch Panel System Using E-Field Sensor Setup Instructions Reference Design Documentation for RDMC33794 This document contains
Use of PGA on MC56F800x Interaction of PDB, PGA and ADC
Freescale Semiconductor Document Number: AN4334 Application Note Rev. 0, 03/2012 Use of PGA on MC56F800x Interaction of PDB, PGA and ADC by: William Jiang System and Application, Microcontroller Solutions
Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes
Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 Release Notes PRODUCT: Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 PRODUCT VERSION: 1.0 DESCRIPTION: Adding support for Keil
VortiQa Enterprise Quick Start Guide
Freescale Semiconductor Document Number: VQSEQSG Quick Start Guide Rev. 0, 06/2009 VortiQa Enterprise Quick Start Guide 1 Introduction This document describes how to set up and install the VortiQa software
Using the Asynchronous DMA features of the Kinetis L Series
Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices
Mask Set Errata for Mask 2M40J
Mask Set Errata MSE9S08QE8_2M40J Rev. 3, 8/2010 Mask Set Errata for Mask 2M40J Introduction This report applies to mask 2M40J for these products: MC9S08QE8 MCU device mask set identification The mask set
MCF5216 Device Errata
Freescale Semiconductor Device Errata MCF5216DE Rev. 1.7, 09/2004 MCF5216 Device Errata This document identifies implementation differences between the MCF5216 processor and the description contained in
Using an I 2 C EEPROM During MSC8157 Initialization
Freescale Semiconductor Application Note AN4205 Rev. 0, 11/2010 Using an I 2 C EEPROM During MSC8157 Initialization The MSC8157 family allows you to use an I 2 C EEPROM to to initialize the DSP during
DSP56F827 Digital Signal Controller
Freescale Semiconductor DSP56F827E Rev. 8.0, 12/2005 56F827 Chip Errata DSP56F827 Digital Signal Controller This document reports errata information on chip revision B. Errata numbers are in the form n.m,
Differences Between the DSP56301, DSP56311, and DSP56321
Freescale Semiconductor Engineering Bulletin Document Number: EB724 Rev. 0, 11/2009 Differences Between the DSP56301, DSP56311, and DSP56321 This engineering bulletin discusses the differences between
2005: 0.5 PQ-MDS-PCIEXP
HW Getting Started Guide PQ-MDS-PCIEXP Adaptor December 2005: Rev 0.5 PQ-MDS-PCIEXP Adaptor HW Getting Started Guide Step 1:Check HW kit contents 1.PQ-MDS-PCIEXP Adaptor 2.PIB (Platform I/O Board) to PCIEXP
56F805. Digital Power Factor Correction using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers. freescale.
56F805 Digital Power Factor Correction using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805DPFCTD Rev. 0 08/2005 freescale.com Digital Power Factor Correction This
Configuring the MCF5445x Family for PCI Host Operation
Freescale Semiconductor Application Note Document Number: AN3517 Rev. 0, 09/2007 Configuring the MCF5445x Family for PCI Host Operation Microcontroller Division Applications Team 1 Introduction The ColdFire
Functional Differences Between the DSP56307 and DSP56L307
Freescale Semiconductor Engineering Bulletin EB361 Rev. 3, 10/2005 Functional Differences Between the DSP56307 and DSP56L307 The DSP56307 and DSP56L307, two members of the Freescale DSP56300 family of
Using the Knock Window etpu Function
Freescale Semiconductor Application Note Document Number: AN3772 Rev. 0, 05/2009 Using the Knock Window etpu Function by: David Paterson 1 Introduction This application note provides simple C interface
MSC8144AMC-S Getting Started Guide
Freescale Semiconductor Hardware Getting Started Guide Document Number: MSC8144AMCSHWGSG Rev. 2, 07/2008 MSC8144AMC-S Getting Started Guide This document describes how to connect the MSC8144AMC-S card
Changing the i.mx51 NAND Flash Model for Windows Embedded CE TM 6.0
Freescale Semiconductor Application Note Document Number: AN3986 Rev. 0, 02/2010 Changing the i.mx51 NAND Flash Model for Windows Embedded CE TM 6.0 by Multimedia Applications Division Freescale Semiconductor,
Gallium Arsenide PHEMT RF Power Field Effect Transistor
Technical Data Available at http://www.freescale.com/rf, Go to Tools Rev., 6/2005 Reference Design Library Gallium Arsenide PHEMT Power Field Effect Transistor Device Characteristics (From Device Data
SCI Driver for the MC9S08GW64
Freescale Semiconductor Application Note Document Number: AN4161 Rev. 0,8/2010 SCI Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document
Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version
Freescale Semiconductor Document Number: AN4253 Application Note Rev. 1, 01/2011 Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version 10.1.8 by DevTech Customer Engineering
MSC8144 Device Reset Configuration For the MSC8144ADS Board
Freescale Semiconductor Application Note Document Number: AN3424 Rev. 0, 05/2007 MSC8144 Device Reset Configuration For the MSC8144ADS Board by Andrew Temple NCSG DSP Applications Freescale Semiconductor,
Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide
Freescale Semiconductor Document Number:S08PT60UG User Guide Rev. 0, 02/2013 Sensorless BLDC Motor Control Based on MC9S08PT60 Tower Board User Guide 1 Overview This user guide describes the basic steps
Interfacing HCS12 Microcontrollers to the MFR4200 FlexRay Controller
Freescale Semiconductor Application Note AN3216 Rev. 0, 2/2006 Interfacing HCS12 Microcontrollers to the MFR4200 FlexRay Controller by: David Paterson MCD Applications, East Kilbride 1 Introduction Freescale
Clock Mode Selection for MSC8122 Mask Set K98M
Freescale Semiconductor Application Note AN2904 Rev. 0, 11/2004 Clock Mode Selection for MSC8122 Mask Set K98M By Donald Simon and Wes Ray This application note describes the MSC8122 clock modes for mask
Mask Set Errata for Mask 5L35K
Freescale Semiconductor MSE908GR16_5L35K Mask Set Errata Rev. 2, 12/2010 Mask Set Errata for Mask 5L35K Introduction This report applies to mask 5L35K for these products: MC68HC908GR16 The mask set is
Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A)
Freescale Semiconductor Engineering Bulletin EB346 Rev. 3, 10/2005 Functional Differences Between DSP56302 and DSP56309 (formerly DSP56302A) To meet the increasing demands for higher performance and lower
Introduction to LIN 2.0 Connectivity Using Volcano LTP
Freescale Semiconductor White Paper LIN2VOLCANO Rev. 0, 12/2004 Introduction to LIN 2.0 Connectivity Using Volcano LTP by: Zdenek Kaspar, Jiri Kuhn 8/16-bit Systems Engineering Roznov pod Radhostem, Czech
MC9S08DZ60 Flash Usage Considerations Andy McKechan Applications Engineer East Kilbride
Freescale Semiconductor Engineering Bulletin Document Number: EB695 Rev. 0, 07/2008 MC9S08DZ60 Flash Usage Considerations by: Andy McKechan Applications Engineer East Kilbride 1 Introduction Freescale
Freescale BeeStack Documentation Overview Document Number: BSDO Rev /2008
Freescale BeeStack Documentation Overview Document Number: BSDO Rev. 1.0 04/2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale
Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module
Freescale Semiconductor APS12DT256PG Quick Reference Guide Rev. 0, 9/2007 Getting Started with the Student Learning Kit Application Module Using the MC9S12DT256 Microcontroller Application Module For use
Interrupts in Decoupled Parallel Mode for MPC5675K Configuration and Usage
Freescale Semiconductor Document Number: AN4495 Application Note Rev. 0, 3/2012 Interrupts in Decoupled Parallel Mode for MPC5675K Configuration and Usage by: Tomas Kulig Automotive and Industrial Solutions
PowerQUICC HDLC Support and Example Code
Freescale Semiconductor Application Note Document Number: AN3966 Rev. 0, 11/2009 PowerQUICC HDLC Support and Example Code High-level data link control (HDLC) is a bit-oriented protocol that falls within
Programming the Keyboard Interrupt Module (KBI) on HC(S)08 MCUs
Freescale Semiconductor Application Note AN2900 Rev. 0, 01/2005 Programming the Keyboard Interrupt Module (KBI) on HC(S)08 MCUs by: Gabriel Sanchez Barba RTAC Americas Mexico Overview This document is
Affected Chips Description Impact and Workaround
Freescale Semiconductor MC56F8013E Rev. 3, 08/2007 56F8013 Preliminary Chip 56F8013 Digital Signal Controller numbers are in the form n.m, where n is the number of the errata item and m identifies the
PowerQUICC II Parity and ECC Capability
Freescale Semiconductor Application Note Document Number: AN2682 Rev. 1, 01/2007 PowerQUICC II Parity and ECC Capability by DSD Applications, Freescale Semiconductor, Inc. Austin, TX Ensuring the integrity
Addendum to HPCN User s Guide: Quick-Start Guide
Freescale Semiconductor Document Number: HPCNUGAD Rev. 0.5, 1/2007 Addendum to HPCN User s Guide: Quick-Start Guide This quick-start guide explains how to prepare the High-Performance Computing Platform-Net
i.mx31 PDK Power Measurement with GUI
Freescale Semiconductor Application Note Document Number: AN4061 Rev. 0, 02/2010 i.mx31 PDK Power Measurement with GUI by Multimedia Application Division Freescale Semiconductor, Inc. Austin, TX This application
56F Phase AC Induction Motor V/Hz Control using Processor ExpertTM Targeting Document 56F bit Digital Signal Controllers
56F8300 3-Phase AC Induction Motor V/Hz Control using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300ACIMTD Rev. 1 08/2005 freescale.com Document Revision History
Using RS08 Microcontrollers with Variable Interrupt Priorities Program Association of RS08 Microcontrollers
Freescale Semiconductor Application Note Document Number: AN3477 Rev. 0, 06/2007 Using RS08 Microcontrollers with Variable Interrupt Priorities Program Association of RS08 Microcontrollers by: Kenny Ji
Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs
Freescale Semiconductor Application Note Document Number: AN3811 Rev. 0, 4/2009 Using GCR4 to Adjust Ethernet Timing in MSC8144 DSPs This application note assists board designers to implement Ethernet
Simplified Device Data Structures for the High-End ColdFire Family USB Modules Melissa Hunter Applications Microcontroller Solutions Group
Freescale Semiconductor Application Note Document Number: AN3631 Rev. 0, 03/2008 Simplified Device Data Structures for the High-End ColdFire Family USB Modules by: Melissa Hunter Applications Microcontroller
LFAE Bootloader Example and Interface for use with AN2546 Daniel McKenna MCD Applications, East Kilbride Scotland
Freescale Semiconductor Application Note Document Number: AN3391 Rev. 0, 01/2007 LFAE Bootloader Example and Interface for use with AN2546 by: Daniel McKenna MCD Applications, East Kilbride Scotland 1
Ordering Information Industry standard SOT343R package Device weight = g (typical) Available only in tape and reel packaging Available only in
Freescale Semiconductor Technical Data Document Number: MBC13916/D Rev. 2.2, 05/2006 MBC13916 MBC13916 General Purpose SiGe:C RF Cascode Low Noise Amplifier 1 Introduction The MBC13916 is a costeffective,
USB Bootloader for the MC9S08JM60
Freescale Semiconductor Application Note Document Number: AN3561 Rev. 0, 11/2007 USB Bootloader for the MC9S08JM60 by: Patrick Yang Asia & Pacific Operation Microcontroller Division 1 Introduction This
Integrating FreeMASTER-Time Debugging Tool with CodeWarrior for Microcontrollers v10.x Project
Freescale Semiconductor Application Document Number: AN4771 Integrating FreeMASTER-Time Debugging Tool with CodeWarrior for Microcontrollers v10.x Project 1. Introduction This application note describes
XGATE Library: Using the Freescale XGATE Software Library Steve McAslan MCD Applications, East Kilbride
Freescale Semiconductor Application Note AN3145 Rev. 0, 2/2006 XGATE Library: Using the Freescale XGATE Software Library by: Steve McAslan MCD Applications, East Kilbride 1 Introduction The Freescale S12X
Writing Touch Sensing Software Using TSI Module
Freescale Semiconductor Document Number: AN4330 Application Note Rev. 0, July 2011 Writing Touch Sensing Software Using TSI Module by: Daniel Martínez Microcontroller Solutions Group Guadalajara 1 Before
SynkroRF Network. User s Guide
SynkroRF Network User s Guide Document Number: SYNKROUG Rev. 1.2 06/2011 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor
XGATE Library: ATD Average Calculating a rolling average from ATD results
Freescale Semiconductor Application Note AN3226 Rev. 0, 2/2006 XGATE Library: ATD Average Calculating a rolling average from ATD results by: Steve McAslan MCD Applications, East Kilbride 1 Introduction