CM Bit Stereo USB Audio Controller. Datasheet Version 1.01

Transcription

1 The Best USB Audio Single Chip for Stereo Digital Control Speakers Application CM Bit Stereo USB Audio Controller Datasheet Version 1.01 C-MEDIA ELECTRONICS INC. TEL: FAX: F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C. For detailed product information, please contact

2 NOTICES THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHAT SO EVER, INCLUDING ANY WARRANTY OF MERCHANT ABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, DOCUMENT OR SAMPLE. ALL RIGHTS RESERVED. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING INFORMATION STORAGE AND RETRIEVAL SYSTEMS, WITHOUT PERMISSION IN WRITING FROM C-MEDIA ELECTRONICS, INC. UCOPYRIGHT Copyright (c) C-Media Electronics Inc. All rights reserved. All content included on this document, such as text, graphics, logos, button icons, images, audio clips, digital downloads, data compilations, and software, is either the exclusive property of C-Media Electronics Inc., its affiliates (collectively, "C-Media"), its content suppliers, or its licensors and protected by Republic of China and international copyright laws. UTRADEMARKS C-Media, the C-Media Logo, Xear 3D, Xear 3D Logo, Speaker Shifter, Smart Jack, and Smart Audio Jack are trademarks of C-Media Electronics Inc. in Republic of China and/or other countries. All other brand and product names listed are trademarks or registered trademarks of their respective holders and are hereby recognized as such. *C-Media reserves the right to modify the specifications without further notice* - 2 -

3 TABLE OF CONTENTS 1. DESCRIPTIONS AND OVERVIEW 5 2. FEATURES 5 3. PIN DESCRIPTIONS PIN ASSIGNMENT BY PIN NUMBER PIN-OUT DIAGRAM PIN SIGNAL DESCRIPTIONS 8 4. BLOCK DIAGRAM ORDERING INFORMATION FUNCTION DESCRIPTIONS USB INTERFACE DEVICE DESCRIPTOR CONFIGURATION DESCRIPTOR USB AUDIO TOPOLOGY DIAGRAM EEPROM (93C46) CONTENT FORMAT HID FEATURE WHAT S HID HID DESCRIPTOR DYNAMIC RANGE CONTROL (DRC) ELECTRICAL CHARACTERISTICS ABSOLUTE MAXIMUM RATING OPERATION CONDITIONS SPERKER IMPEDANCE VS. OUTPUT POWER CONSUMPTION AUDIO PERFORMANCE

4 8. AUDIO PERFORMANCE CURVES FREQUENCY RESPONSE (10K OHM LOADING) FREQUENCY 44.1 KS/SEC FREQUENCY 48 KS/SEC PASSBAND RIPPLE (10K OHM LOADING) PASSBAND 44.1 KS/SEC PASSBAND 48 KS/SEC REFERENCE APPLICATION CIRCUIT REFERENCE

5 1. DESCRIPTIONS AND OVERVIEW CM103+ is a highly integrated single chip for USB digital control speaker application. It is a truly plug-and-play USB audio device and provided high quality digital sound playback. This one chip solution not only embedded USB transceiver, ADC, DAC component but also integrated digital control power amplifier function for USB digital sound application. Minimum external components are needed for building a high-end 2CH USB speaker system, which makes CM103+ a simple and very cost-effective solution. Since no driver is necessary for audio playback on all major OS. The innovation technology DRC feature was integrated on CM103+. This Dynamic Range Control function can support high efficiency volume output to get loudness sound effect similar D class amplifier capability. Vender can just using single chip to saving external amplifier component and getting a better listening experience when listen to a music source with wide dynamic range. Customers can use an EEPROM to define vendor specific VID / PID / Product String, and even special hardware configuration. More flexible and customized design is possible with GPIO pin, which is accessible by USB vendor specific request. For energy saving, USB suspend mode and resume is supported by CM103+. With power amplifier enable pin and volume control VR input pin, a traditional speaker front panel design can be built. Moreover, CM103+ support USB standard HID Interface which provide Vol_up / Vol_dn / Play_mute Buttons and Rotary Encoder for pure digital volume control. 2. FEATURES USB 2.0 Full Speed Compatible and USB IF certification USB Audio Devices Class Specification Ver1.0 Compatible USB Bus Powered 500mA, without External Power Supply High performance 16-Bit Stereo, 48 / 44.1 KHz Sampling Rate for Audio Playback S/PDIF Output Interface Embedded USB Transceiver Embedded High Performance 16-Bit Audio DAC - 5 -

6 Embedded Digital Control Power Amplifier for Speaker Driving Support Power Amplifier Enable / Disable Control Pin Support Dynamic Range Control (DRC) Feature to Provide a Better Listen Experience Embedded Power-On-Reset Block Embedded 5V to 3.3V Regulator with Voltage Level Detector for Single 5V External Power Supply Embedded Temperature Protection Circuit Embedded X2 Modulation for Higher Audio Quality Embedded Anti-Pop Circuit with Internal Feedback Structure Single 12MHz Crystal Input with Embedded PLL Isochronous Transfer using Adaptive Synchronization with Internal PLL External EEPROM Interface for Vendor Specific VID / PID / Product String EEPROM Read / Write Function via Vendor Specific Request for Mass Production Convenience Analog Volume Control Input with Simple External VR Circuit Digital Volume Control Input with Digital Rotary Encoder or Vol_up / Vol_dn / Play_mute Bottoms Vol_up / Vol_dn / Play_mute Pins and Digital Rotary Encoder Interface Support USB HID Devices Class Ver1.11 for Host Volume Control Synchronization Supports USB Suspend / Resume Mode and Remote Wakeup with Digital Volume Control Pins LED Indicator Pin During Playback 1 GPIO pin for Application Specific Usage 3.3V I/O with 5V Tolerance Dolby Digital and DTS Audio Streaming via S/PDIF Output Compatible with Win 98SE / Win ME / Win 2000 / Win XP, and Mac OS 10.X without additional driver - 6 -

7 3. PIN DESCRIPTIONS 3.1 PIN ASSIGNMENT BY PIN NUMBER Pin # Signal Name Pin # Signal Name Pin # Signal Name Pin # Signal Name 1 EESK 13 NC 25 AVDD 37 NC 2 DVDD5V 14 NC 26 AVDD 38 DRCEN 3 EECS 15 REGV 27 LOL 39 SPDIFO 4 EEDW 16 NC 28 LOL 40 PDSW 5 EEDR 17 USB_DP 29 LOL 41 PAEN 6 LEDO 18 NC 30 LOL 42 GPIO 7 MUTE 19 USB_DM 31 LOR 43 VOL_UP 8 DVDD5V 20 NC 32 LOR 44 VOL_DN 9 DVDD5V 21 DVSS 33 LOR 45 DVSS 10 VP 22 TEST 34 LOR 46 NC 11 VN 23 VREF 35 AVSS 47 XTAL_O 12 NC 24 VOLADJ 36 AVSS 48 XTAL_I *Note: -NC- means No-Connect 3.2 PIN-OUT DIAGRAM EESK AVSS DVDD5V AVSS EECS LOR EEDW LOR EEDR LOR LEDO LOR MUTE LOL DVDD5V LOL DVDD5V VP VN CM103+ LOL LOL AVDD NC AVDD NC NC REGV NC USB_DP NC USB_DM NC DVSS TEST VREF VOL_ADJ XTAL_I XTAL_O NC DVSS VOL_DN VOL_UP GPIO PAEN PDSW SPDIFO DRC EN NC

8 3.3 PIN SIGNAL DESCRIPTIONS Pin # Symbol Type Description 1 EESK DO, 8mA, SR EEPROM Interface Clock 2 DVDD5V P 5V Power Supply for Digital Circuit 3 EECS DO, 8mA, SR EEPROM Interface Chip Select 4 EEDW DO, 8mA, SR EEPROM Interface Write to EEPROM 5 EEDR DI, ST, PD, 5VT EEPROM Interface Read from EEPROM 6 LEDO DO, 8mA, SR LED Indicator for Playback 7 MUTE DI, ST, PU Mute Pin (HID Standard) 8 DVDD5V P 5V Power Supply 9 DVDD5V P 5V Power Supply 10 VP DI, ST, PU Digital Rotary Encoder Interface Pin A 11 VN DI, ST, PU Digital Rotary Encoder Interface Pin B 12 NC - No Connect 13 NC - No Connect 14 NC - No Connect 15 REGV AO Regulator output 3.3V 16 NC - No Connect 17 USB_DP AIO USB Data D+ 18 NC - No Connect 19 USB_DM AIO USB Data D- 20 NC - No Connect 21 DVSS P Digital Ground 22 TEST DI, ST, PD Test Mode Select Pin, Pull-Down in normal Operation 23 VREF AO Connecting to External Decoupling Capacitor for Embedded Bandgap Circuit; 2.25V Output - 8 -

9 Analog Volume Control Input from external VR circuit. 24 VOLADJ AI 0 ~ 2.25V:+3dB / mute 3.5 ~ 5V: 0dB 25 AVDD P 5V Power Supply for Analog Circuit 26 AVDD P 5V Power Supply for Analog Circuit 27 LOL AO Line Out Left Channel 28 LOL AO Line Out Left Channel 29 LOL AO Line Out Left Channel 30 LOL AO Line Out Left Channel 31 LOR AO Line Out Right Channel 32 LOR AO Line Out Right Channel 33 LOR AO Line Out Right Channel 34 LOR AO Line Out Right Channel 35 AVSS P Analog Ground 36 AVSS P Analog Ground 37 NC - No Connect 38 DRCEN DI 1:DRC ON (default) 0:DRC Off 39 SPDIFO DO, 8mA, SR S/PDIF Data Output Power Down Switch Control Signal Output 40 PDSW DO, 8mA, SR 41 PAEN DI, ST 1: Normal Mode 0: Power Down Mode (Suspend Mode) Power Amplifier Control Input, Connect to a Switch or Pull-High in Normal Operation. H: Enable Power Amplifier (Normal Mode) L: Disable Power Amplifier 42 GPIO DIO, 8mA, ST, SR, PD GPIO Pin, Controlled via Vender Specific Command - 9 -

10 43 VOL_UP DI, ST, PU Volume Up Pin (HID Standard) 44 VOL_DN DI, ST, PU Volume Down Pin (HID Standard) 45 DVSS P Digital Ground 46 NC - No Connect 47 XTAL_O AO Output Pin for 12MHz Oscillator 48 XTAL_I AI Input Pin for 12MHz Oscillator *NoteU:DI / DO / DIO Digital Input / Output / Bi-Directional Pad AI / AO / AIO Analog Input / Output / Bi-Directional Pad P Power Pin SR Slew Rate Control ST Schmitt Trigger PD / PU Pull Down / Pull Up 5VT 5 Volt Tolerant (3.3V Pad)

11 4. BLOCK DIAGRAM VOLADJ SPDIFO VN VP MUTE VOL_DN VOL_UP PAEN PDSW D+ D- HID Control I/F ADC TEST USB I/F Dynamic 2x Over DAC VOL -43.5~ +3dB OP LOL LEDO GPIO FIFO Range Control Sampling Digital Filter DAC VOL ~ +3dB OP LOR EEDR EEDW EESK EEPROM I/F USB Clock Gen Audio Clock Gen Bandgap VREF EECS Crystal OSC Power Supply GND REGV (3.3V) 5V XTAL_I XTAL_O Block Diagram Of CM

12 5. ORDERING INFORMATION Model Number Package Operating Ambient Temperature Supply Range CM Pin LQFP 7mm 7mm 1.4mm (Plastic) 0 o C to +70 o C DVdd = 5V, AVdd = 5V 48-Lead Thin Plastic Quad Flatpack (LQFP) Outline Dimensions *Dimensions shown in inches and (mm)

13 6. FUNCTION DESCRIPTIONS 6.1 USB INTERFACE DEVICE DESCRIPTOR Offset Field Size Value (Hex) Description 0 blength 1 12 Total 18 Bytes 1 bdescriptortype 1 01 Device Descriptor 2 bcdusb USB 1.1 compliant. 4 bdeviceclass bdevicesubclass bdeviceprotocol bmaxpacketsize Endpoint Zero Size = 8 bytes 8 idvendor 2 0D8C Vendor ID 10 idproduct Product ID 12 bcddevice Device Release Number 14 imanufacturer iproduct iserialnumber 1 00 Index of string descriptor describing manufacturer -> C-Media INC. Index of string descriptor describing product -> "C-Media USB Audio " Index of string descriptor describing the device s serial number 17 bnumconfigurations 1 01 Configurations number =

14 6.1.2 CONFIGURATION DESCRIPTOR Offset Field Size Value (Hex) Description 0 blength 1 09 Total 9 Bytes 1 bdescriptortype 1 02 Configuration Descriptor 2 wtotallength 2 008D 4 bnuminterfaces 1 03 Total length of data returned for this configuration. Number of interfaces supported by this Configuration. 5 bconfigurationvalue iconfiguration bmattributes 1 80 Self-powered without Remote Wakeup 8 bmaxpower 2 FA Maximum power consumption of the USB. 0xFA=500 ma USB AUDIO TOPOLOGY DIAGRAM USB streaming ID = 01 Feature Unit (Volume) (Mute) ID = 0D Speaker ID =

15 6.2 EEPROM (93C46) CONTENT FORMAT CM103+ supports four-wire serial EEPROM interface. When an external serial EEPROM is detected, Vendor ID, Product ID, and Product String reported within Device Descriptor will be derived from the content of serial EEPROM. The setting values of serial EEPROM is shown below: Address Contents 00 0x434D (*Note1) 01 Vender ID 02 Product ID 03 String1, String0 04 String3, String2 05 String5, String4 06 String7, String6 07 String9, String8 08 String11, String10 09 String13, String12 10 String15, String14 11 String17, String16 12 String19, String18 13 String21, String20 14 String23, String22 15 Bit 0: DRC Enable / Disable 16~63 -- *Note: The first word of the EEPROM is a magic code. Only when it matches, the IC will regard the serial EEPROM valid

16 6.3 HID FEATURE HID feature is provided by CM103+ so user setting to Volume-Up, Volume-Down, Playback-Mute button pin, and the Digital-Rotary-Encoder for Volume Control is reported to the host to synchronize host side setting WHAT S HID USB protocols can configure devices at startup or when they are plugged in at run time. These devices are broken into various device classes. Each device class defines the common behavior and protocols for devices that serve similar functions. The HID (Human Interface Device) class is one of the device classes. The HID class consists primarily of devices that are used by humans to control the operation of computer systems. Typical examples of HID class devices include: - Keyboards and pointing devices, for example: mouse, trackballs, and joysticks. - Front-panel controls, for example: knobs, switches, buttons, and sliders. - Controls that might be found on devices such as VCR remote controls, games or simulation devices, for example: data gloves, throttles, and steering wheels. - Devices that may not require human interaction but provide data in a similar format to HID class devices, for example: bar-code readers, thermometers, or voltmeters HID DESCRIPTOR HID Interface Descriptor Offset Field Size Value (Hex) Description 0 blength 1 09 Size of this descriptor: 9 byte 1 bdescriptortype 1 04 INTERFACE descriptor type 2 binterfacenumber 1 02 Number of Interface 3 balternatesetting 1 00 alternate

17 4 bnumendpoints 1 01 Number of endpoints used by this Interface: 1 5 binterfaceclass 1 03 HID Interface Class 6 binterfacesubclass 1 00 No Subclass 7 binterfaceprotocol 1 00 Must be set to 0 8 iinterface 1 00 Index of a string descriptor that describes this interface. HID Descriptor Offset Field Size Value (Hex) Description 0 blength 1 09 Total 9 Bytes 1 bdescriptortype 1 21 HID Descriptor Type 2 bcdhid HID class version bcountrycode bnumdescriptors bdescriptortype 1 22 Report Descriptor 7 wdescriptorlength 2 002A Numeric expression that is the total size of the optional descriptor Interrupt IN Endpoint Descriptor Offset Field Size Value (Hex) Description 0 blength 1 07 Total 7 Bytes 1 bdescriptortype 1 05 ENDPOINT Descriptor Type 2 bendpointaddress 1 81 IN Endpoint Endpoint number = 3 3 bmattributes 1 03 Interrupt endpoint type 4 wmaxpacketsize Maximum packet size: 4 bytes 6 binterval 1 04 Interrupt Interval: 4ms

18 6.4 DYNAMIC RANGE CONTROL (DRC) CM103+ include a new feature called Dynamic Range Control (DRC), and with a default ON setting (Users can still turn it off within the Windows audio advance control panel) Dynamic range is defined as the difference, in decibels (db), between the loudest and quietest sounds in any particular piece of audio content. Classical music is a good example, with ranges from piano (soft) to forte to FFF (for extremely loud). Movies also typically have a wide dynamic range, which may cause you to have to turn the volume up and down as scenes change. For example, when watching a movie at home, you may be forced to turn up volume to hear the dialog in a quiet scene, and then quickly turn it down again during a car chase scene that follows. In this way, there may be times in a home theater environment when it would be useful to be able to control the dynamic range. +20dB +10dB 0dB -10dB -20dB -30dB -40dB -50dB -60dB A Peaks Reduced B Lower Levels Raised With Dynamic Range Control enabled, the full dynamic range (A) of the program is reduced (B). Peaks Clipped Peaks Reduced DRC A Lower Levels hard to heard B Lower Levels Raised

19 7. ELECTRICAL CHARACTERISTICS 7.1 ABSOLUTE MAXIMUM RATING Symbol Parameter Value Unit Dvmin Min Digital Supply Voltage 0.3 V Dvmax Max Digital Supply Voltage + 6 V Avmin Min Analog Supply Voltage 0.3 V Avmax Max Analog Supply Voltage + 6 V Dvinout Voltage on any Digital Input or Output Pin 0.3 to +5.5 V Avinout Voltage on any Analog Input or Output Pin 0.3 to +5.5 V TBstgB Storage Temperature Range -40 to +125 P PC ESD (HBM) ESD Human Body Mode 2000 V ESD (MM) ESD Machine Mode 200 V Latchup Latch Up Test 200 ma OPERATION CONDITIONS Min Typ Max Unit Analog Supply Voltage V Digital Supply Voltage V Total Power Consumption ma Suspend Mode Power Consumption Operating ambient temperature ua 0-70 P PC o

20 7.3 SPERKER IMPEDANCE VS. OUTPUT POWER (PER CHANNEL) Items Loading (Ohm) 4 Ohm 8 Ohm 32 Ohm 10K Ohm Vpp Vrms W(rms/sin wave) 308 mw 181 mw 52 mw 0.17 mw W(rms/square wave) 616 mw 361 mw 103 mw 0.35 mw W(PMPO) 2460 mw 1450 mw 410 mw 1 mw *Note1: Test 25 o C, 5 Volt +- 10%, 1KHz Sin Wave *Note2: Typical Output with THD+N < 1%; Maximal Output with THD+N < 10% 7.4 AUDIO PERFORMANCE Min Typ Max Unit Resolution Bits Frequency 48KHz K Hz Frequency 44.1KHz K Hz Passband 48 KHz K Hz Passband 44.1 KHz K Hz DAC (10K Ohm Loading) SNR db Dynamic Range db THD + N db Output Voltage (rms) Vrms

21 DAC (32 Ohm Loading) SNR db Dynamic Range db THD + N db Output Voltage (rms) Vrms DAC (8 Ohm Loading) SNR db Dynamic Range db THD + N db Output Voltage (rms) Vrms DAC (4 Ohm Loading) SNR db Dynamic Range db THD + N db Output Voltage (rms) Vrms

22 8. AUDIO PERFORMANCE CURVES 8.1 FREQUENCY RESPONSE (10K OHM LOADING) FREQUENCY 44.1 KS/SEC C-MEDIA Digital Playback (PC-D-A) for Line Output Frequency 05/31/05 14:10:33 Response d B r A k 2k 5k 10k Hz Sweep Trace Color Line Style Thick Data Axis Comment 1 1 Cyan Solid 3 Fasttest.Ch.1 Ampl!Normalize Left 1 2 Yellow Solid 3 Fasttest.Ch.2 Ampl!Normalize Left WL-Multitone-44k.at2c FREQUENCY 48 KS/SEC C-MEDIA Digital Playback (PC-D-A) for Line Output Frequency 05/31/05 14:07:22 Response d B r A k 2k 5k 10k Hz Sweep Trace Color Line Style Thick Data Axis Comment 1 1 Cyan Solid 3 Fasttest.Ch.1 Ampl!Normalize Left 1 2 Yellow Solid 3 Fasttest.Ch.2 Ampl!Normalize Left WL-Multitone-48k.at2c

23 8.2 PASSBAND RIPPLE (10K OHM LOADING) PASSBAND 44.1 KS/SEC C-MEDIA Digital Playback (PC-D-A) for Line Output Passband 05/31/05 14:11: d B k 2k 5k 8k Hz Sweep Trace Color Line Style Thick Data Axis Comment 1 1 Cyan Solid 3 Fasttest.Ch.1 Ampl!Normalize Left 1 2 Yellow Solid 3 Fasttest.Ch.2 Ampl!Normalize Left WL-PassbandRipple-M44k.at2c PASSBAND 48 KS/SEC C-MEDIA Digital Playback (PC-D-A) for Line Output Passband 05/31/05 14:09: d B k 2k 5k 9k Hz Sweep Trace Color Line Style Thick Data Axis Comment 1 1 Cyan Solid 3 Fasttest.Ch.1 Ampl!Normalize Left 1 2 Yellow Solid 3 Fasttest.Ch.2 Ampl!Normalize Left WL-PassbandRipple-M48k.at2c

24 9. REFERENCE APPLICATION CIRCUIT

25 10. Reference Universal Serial Bus Specification, Version 2.0 Universal Serial Bus Device Class Definition for Audio Devices, Version 1.0. Universal Serial Bus Device Class Definition for Human Interface Devices (HID), Version End of Specifications- C-MEDIA ELECTRONICS INC. 6F., 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106 R.O.C. TEL: FAX: URL:TUhttp://