Demo Lab Guide OpenManage Network Manager

Size: px
Start display at page:

Download "Demo Lab Guide OpenManage Network Manager"

Transcription

1 Demo Lab Guide OpenManage Network Manager OpenManage Essentials Walk Through and Configuration Product Domain: Networking Author: Ruairi Mongan Version: 1.01 Date: 20/11/ Dell Demo Center Dell Inc., 2016

2 Table of Contents 1 Product Overview Lab Preparation Considerations and Caveats Introduction Lab Topology and Essential Information OpenManage Network Manager Demo Preparation Device Management and Reporting Performance Performance Creating Custom Dashboards Resources Backup, Compare and Restore Device Configurations Operations Automation with Device Groups, Scheduling and Adaptive CLI Create Custom Scripts SFLOW and using Traffic Flow Analysis Network View Alarms and Events Dell Demo Center Dell Inc., 2016

3 1 Product Overview Featuring an intuitive web-based interface, support for the Dell family of network switches, and multivendor support, OpenManage Network Manager makes it easier than ever to manage your converged network infrastructure with: - One-to-many functionality to automate configuration management - Easy monitoring and diagnoses of networking health and performance - Ability to deploy firmware, backup and restore configurations across many switches and routers - Affordable subscription-based model Key benefits - Automates the discovery of network devices and provides detailed information on their connectivity, including the ability to draw physical and logical topology maps. - Easily configure and manage groups of network devices; configuration changes and firmware deployments can be made to multiple devices in one operation, and many network operations can be scheduled for pre-determined times. - Network administrator can monitor health and performance of their network, create dashboards to capture important events and trends, and display them over time. - Helps reduce TCO by proactively monitoring for network problems, automating common configuration actions and enabling easy firmware deployment. 3 Dell Demo Center Dell Inc., 2016

4 1.1 Lab Preparation Considerations and Caveats It is in your best interests to ensure the demo environment you will be demonstrating is clean & tidy before you begin. For this reason we would recommend, where possible, you log in to your demo at least 15 minutes prior to delivery and check the following; 1. Familiarize yourself with the environment during this time and check any specific features you are expecting to demo. 2. Most importantly, be crystal clear with yourself on what it is you plan to show. A full demo of every feature described below (with questions) can take several hours. If you only have a short time slot be sure to focus on the key points that address the customer s pain points and will drive value home to them. 3. Ensure that you have scheduled the demo for sufficient time so as not to have the demo end before you are finished with the customer. Any other guidance on how the user should prepare for the lab can be added here. If there are limitation or something the user should be aware of call out also. 4 Dell Demo Center Dell Inc., 2016

5 2 Introduction In this guide you will find the OpenManage Network Manager (OMNM) demo that is available through The guide details a number of options available to the user enabling the demonstration of the Dell OMNM solution. The guide provides a task list which can be used to showcase the product to customers or alternatively be used by the Field Engineers for self-paced learning and education around the OpenManage Network Manager product. The guide and demo are focused on the following elements:- - Providing a facility to enable Sales Engineers to talk about the benefits and value of OMNM - Enable Sales Engineers to demonstrate the products features, ease of use and configuration The demo will be focus on a number of different scenarios. Each scenario will build on the previous stage to provide a complete showcase of the OMNM product. During the demo you will:- - Configure a number of endpoints to enable discover via OMNM - Backup, Restore and Compare Configuration changes on devices - Configure Traffic Analysis within OMNM - Use the Adaptive CLI to undertake configuration changes on managed devices - Create and Generate Reports - Understand the Network View within OMNM 2.1 Lab Topology and Essential Information Further information is provided on the hardware and virtual machines that encompasses the demo environment. All username, password and IP Addresses required to conntect to the various elements of the demo are provided within the demo landing page which is display when you access the demo. 5 Dell Demo Center Dell Inc., 2016

6 The demo environment consists of:- - OpenManager Network Manager Server - 1 x Dell N x Force10 S-SERIES - 1 x Cisco x Test Client - 1 x Test Server Note: To show monitoring and alerting within the Demo Environment there are a range of devices that are read-only have restricted access. These are the devices in the /24 address range within the OMNM console. The devices are used to showcase OMNM Network View Feature SFLOW monitoring And SNMP Alerting Please note these devices are not accessible via the Terminal Console within the Web UI 6 Dell Demo Center Dell Inc., 2016

7 The Dell N4000, Force10 S-SERIES and Cisco 3750 are provided to allow demonstration of hands on device configuration and preparation for discovery by the OpenManage Network Manager software. Note: To enable demonstration of the following features please read section Demo Preparation Device discover by OMNM File Management Operations Quick Links and Direct Access All the above operation should be conducted on the N4000, S-60 and Cisco 3750 provided. When you access the environment from the URL provided with your booking link a demo homepage will appear. The homepage contains the necessary information to access all the devices within the environment. An example is provided for reference: 7 Dell Demo Center Dell Inc., 2016

8 3 OpenManage Network Manager Demo Preparation Once you have selected and launched the URL Launch link provided via your demo booking you will be logged into your demo environment. On the Desktop of the demo machine please check the Switch Consoles and OMNM Console are up and available. You are not required to enter any login information for the switches, the only login information required will be when logging into the OMNM Web Console. Shortcuts are provided:- 8 Dell Demo Center Dell Inc., 2016

9 Please login with the username and password below:- Username demouser Password - password 1. We will no perform the the intial discovery of hardware via OMNM. Select the Discover option on the left hand side. 2. Under the Discover page there is Discovery Profiles and the N4000, S60 and Cisco 3750 devices. These devices have been preconfigured with SNMP and SFLOW settings. Please spend some time exploring: 9 Dell Demo Center Dell Inc., 2016

10 a. The Authenication Portlet. This is were authentication profiles are created for the manageddevices. These are used as part of a Discovery Profile. Right Click within the Authenication Portlet. A number of options will be displayed These include 3. Authentication. Under the Discovery Profiles there is an existing profile omnm6. This profile will be used to perform the discovery of New i. Edit ii. Details iii. Audit iv. Delete Spend some time exploring these and getting familiar with them Note:. When adding a new authentication type there is the option to associate the type with existing devices within the OMNM database. The authentication type can additionally be added to existing user groups defined by the system administrator. 4. The relevant Authenication profiles required for the demo are preconfigured. The profiles used are a. omnm6-telnet b. omnm6-snmp 5. The next stage in the process is creation of the Discovery Profile. The profile is used by OMNM to associate Authentication profiles against devices you want to discover. The profile consists of a number of options including: a. Discovery Options b. Authentication type to be associated with the devices c. IP addresses of the devices to be discovered d. Actions task to be run upon device discovery e. Inspection check to ensure the device is reachable and the authentication credentials provided are valid. 6. Please explore the predefined omnm6 discovery profile and the various settings within it. 10 Dell Demo Center Dell Inc., 2016

11 7. The next step is to run the omnm6 discovery rofile. To run the discovery task Right Click the discovery profile and select Exectue 8. When the job is running a pop window will appear detailing the running tasks and there progress 11 Dell Demo Center Dell Inc., 2016

12 9. If all tasks have been returned with a Green Tick then the device discovery was successful. If an error has occurred then a Red Wrench is dispayed. More detail on the failure is provided by selecting the particular task within the list and viewing the details section in the popup windows 12 Dell Demo Center Dell Inc., 2016

13 Note If a wrench with a red exclamation mark appears during this phase (as above) then there is a problem with authentication information entered. To ensure all login details double check the Authentication profiles and the switches configuration. 10. To validate the discovery task has been successful select the Home option on the navigation menu. Within this view devices are displayed under the Managed Resources section. Browse through the various devices to find the devices which have just been discovered. Displayed below is an example of what should be displayed if successful. 13 Dell Demo Center Dell Inc., 2016

14 3.1.2 Device Management and Reporting This section of the demo will explore the features within OMNM and how they can be used. This section will focus on the different elements within the OMNM solution that provide data and reporting into the health of the environment and the devices contained within. It will focus on exploring: - Device status and configuration - How to obtain performance data - How to create custom views that are relevant for you - And traffic monitoring with SFLOW When the OMNM web console is logged in the default view to be displayed is the Home view. This provides a high level view of the environment and the state of its health to the end user. From here the user can see the: - Managed Resources - Alarms that may have been triggered and their severity - Top Problem Node - A device can be searched for by IP Address or Hostname As an example of the information available from the Home view right click on the N4000 switch discovered by OMNM in the previous steps. You will see the options available to the user similar to below. 14 Dell Demo Center Dell Inc., 2016

15 From this menu the details of the device can be viewed, edited or the device can be accessed if a user would like to make configuration changed. The key note to highlight is that these options are available within various areas of the OMNM console Performance Once the devices within the network have been discovered the next stage is to configure the performance monitoring within OMNM and starting to collect the performance data from the devices. 1. To start please select the Performance option from the OMNM menu. The next step is to configure the Resource Monitors available within OMNM. 2. Under the Resources Monitors Portlet right click on any monitors that have an X and select the Enable option. (Please note all monitors may already be active). 15 Dell Demo Center Dell Inc., 2016

16 Note: Performance statistic usually take 3-5 minutes to start showing in the GUI. 3. The Resource Monitors can customized. The polling intervals, metric, thresholds etc. can be altered and tweaked. a. Right click and select Edit on the Resource Monitor b. Under General Retention Options place a check mark in the following areas i. Retention Policy ii. Emit Available Events iii. Retain Poll Data iv. Update Network Status v. Retain Available Data vi. Retain Calculated Data c. The Polling Interval can be changed from the default 5 minutes d. Click on Calculated Metrics, this allows you to edit any of the Calculated Metrics e. Click on Thresholds, this section allows you to change and or set the Threshold interval levels. f. Click Save 16 Dell Demo Center Dell Inc., 2016

17 4. Once the Resource Monitors have been enabled and are collecting data we can start to take a look at the different statistics available within OMNM. OMNM can provide real time port statistics data in a raw format. This can be exported to excel for analysis or reporting. (Please use the devices which you have discovered in the previous steps to generate export data) a. Browse to the Performance > Resource Monitors and right click on the Default Interface Monitor selecting View Monitor Data 17 Dell Demo Center Dell Inc., 2016

18 b. Click on the Wrench. A settings box will appear. You can alter the Max Results and Page Sizing c. Click on the Column s from here you can spend some time deciding on what statics to show and hide d. Click Apply e. Click Export and decide on the format to export the data i. PDF ii. Excel iii. CSV 18 Dell Demo Center Dell Inc., 2016

19 f. Click Generate Export Performance Creating Custom Dashboards OMNM provides the capability to create custom dashboards. The next sections walks through some scenarios on using dashboards and how to configure them. 1. From the Performance view navigate to the Dashboard Views and right click and select New Simple Dashboard. 19 Dell Demo Center Dell Inc., 2016

20 2. Select Add Entity a. Select Go b. Select an IP Address c. Click Add Selection d. Select Done e. Click Save 3. Next under the Edit Dashboard View you can add attributes to the Dashboard. Please add: a. Some text to the View Name b. Leave Show Composite unchecked c. Leave Timeframe within the last 30 days d. Under Dashboard View Attributes i. Highlight CPU Utilisation and click on Move selected right blue arrow ii. Highlight Memory Utilisation and click on Move selected right blue arrow iii. Select Save 4. To view the Dashboard created in the previous step there are two option available: a. Click Launch Popup 20 Dell Demo Center Dell Inc., 2016

21 b. Select Performance Network Dashboards i. Click Select New ii. Click Go iii. Highlight CPU & Memory Utilisation iv. Click Select v. The custom dashboard created previously will be displayed 21 Dell Demo Center Dell Inc., 2016

22 5. Select Performance TOP N a. TOP N gives you a single pane of glass of the overall health of your network. If you have no data after discovery this is normal, wait 3-5 minutes before performance data begins to show up. If you have no data at all, this means you did not properly discover your devices and an authentication more than likely CLI or SNMP is missing Resources The Resources view provides a detailed inventory of the OMNM managed infrastructure. This section walks through some of the various options available within the Resources view. 1. Select a device within the Managed Resources section. Select the device named OMNM-#- N4000. Right click on the device and select Edit. 22 Dell Demo Center Dell Inc., 2016

23 2. Displayed will be various details relating to the hardware device under OMNM management. Please explore the various tabs with the popup window. The information and options include: a. General Details i. Equipment Name ii. Vendor iii. Service Tag b. Extended Details i. IP Address ii. The option to manage the system by hostname iii. Network Status c. Management Interface i. Provides information on what methods are being utilized for management of the device. If at a future date a user wanted to add an additional management interface type this can be included here. d. Authentication i. This details the currently profiles used to for authentication against a device 3. Return to Resource this time right click on the OMNM-3750 device and select Detail. The Detail page for the device you selected will appear. Please spend some time exploring the information and options available. a. Within the Details view there are Quick Actions. These enable the user to for example: i. Launch a device CLI terminal (This option is not available on all hardware. To show console access please use the N4000 or S-SERIES or Cisco 3750 device provided during discovery.) ii. Launch ICMP ping iii. Browse the device MIB s 23 Dell Demo Center Dell Inc., 2016

24 b. There is additional tabs providing greater detail on the particular device including: i. History which showcases detail on the latest configuration changes and any scripts that have been run on the device through the adaptive CLI. ii. Network which provides interface and port detail iii. 24 Dell Demo Center Dell Inc., 2016

25 Note: You will also notice that we now display "Performance Indicators" for this specific switch. Under "Monitor Status Summary" these are the monitors that are actively polling your switch and ports. On the lower right hand side you will notice "Authentication", these are the authentication credentials that OMNM associated to the network devices based on the manual authentication input entered during discovery. Reference Tree allows you to expand loopbacks, management interfaces, port channel, VLANs, etc Backup, Compare and Restore Device Configurations OpenManage Network Manager provides the ability to backup and compare the configuration of devices that are under its management. In addition OMNM has the ability to restore the previous configuration of a device which may have had changes administered. For this part of the demo please use any of the devices added at the device discovery phase - OMNM OMNM-N OMNM-S60 1. Click Resources 25 Dell Demo Center Dell Inc., 2016

26 a. Under Managed Resources right click on the OMNM-3750 device added in the initial discovery phase b. Navigate to Direct Access selecting the Terminal option (if any security warning appear) and click ; Run c. A Terminal session will be displayed and the console will be displayed in execute mode. d. Enter configuration mode and make a small change to the startup-config for example snmp-server location round-rock e. Save these changes to the startup-config file. end copy running-config startup-config Proceed to copy the file [confirm yes/no]: yes f. Close the Terminal Access session 2. The next step is capture a backup of the startup-configuration on the switch. a. Select Resources b. Under Managed Resources right click on the switch c. Select the File Management - Backup option 26 Dell Demo Center Dell Inc., 2016

27 d. Enter a file name and description for the backup job e. Under the Transfer Protocol ensure TFTP is selected f. Check to ensure the device in the Select Targets for Backup contains the switch you selected g. Under the Device Options there is a Config Type selection option. Please ensure startupconfig is selected from the drop down menu. h. Click Execute. i. If the backup operation completes successfully you should see output in the Results section similar to the below 27 Dell Demo Center Dell Inc., 2016

28 3. Having implemented a change and performed a backup with the configuration change a comparison can now be run against the original switch configuration. a. Return to the Resources page b. Right click on the Switch that you backed up c. Navigate to File Management Select Compare Current and Previous Configuration 28 Dell Demo Center Dell Inc., 2016

29 Note: This is helpful information for a network administrator, they can quickly find the changes made between different version of the configurations. 4. If a configuration change has been made and the network administrator wishes to back the change out OMNM enables this by allowing the user to restore a saved configuration to the device. a. Return to the Resources page b. Right click on the device on which you want to restore a backup configuration. c. Navigate to File Management Restore d. A Restore Device pop up will appear like below 29 Dell Demo Center Dell Inc., 2016

30 e. Ensure the Transfer Protocol selected is TFTP f. And the Select Targets for Restore device you used for the file comparision. g. Highlight the switch. There will be a number of options appear. h. Select the option Restore a specific Configuration File i. The choose the specific file to restore from the file options provide in the list j. Select the Driver Options Tab. (There may not be any options available on this page) In the driver options tab ensure the following dropdown options are chosen: i. Configuration running ii. Restart Options No Restart k. Select Execute. If the restore of the configuration is successful you should see a result like to below on completion. 30 Dell Demo Center Dell Inc., 2016

31 3.1.7 Operations Automation with Device Groups, Scheduling and Adaptive CLI OpenManage Network Manager enables networking administrators to automate repetitive tasks through use of Device Groups, Scheduling and the Adaptive CLI. The following steps will run through how to configure Device Groups and how to utilise these in conjunction with Scheduling and the Adaptive CLI. 5. The first stage is to create the Device Groups. There are two types of Device Group available within OMNM a. Dynamic this groups devices based on an object type which the user defines while creating the group. 31 Dell Demo Center Dell Inc., 2016

32 b. Static this groups devices based on the user selection of the devices they want to appear within the group. For example the use may decide to create a group based on the physical data center location. 6. To create a Dynamic Group go to Admin and Groups & Locations. a. Find the Managed Resources Groups Portlet b. Right click and select New Dynamic c. Under the Resource Group Parameters please provide a unique Name for the group e.g. Dell Networking d. Within the Specify Resource Filter Criteria Group section please specify the following options: i. Model ii. Contains iii. 375xx e. Click Apply f. Click on Preview this will display all devices matching the criteria. g. Click Save 7. The following steps will create a static group. For the creation of the static group we are going to use the OMNM-3750 switch we added to OMNM during the discovery phase. a. As in the previous steps browse to Admin and Groups & Locations b. Right click on Managed Resource Groups selecting New Static c. Provide a unique name for the static group e.g. Cisco 3750 d. Click Add e. Select the device you wish to add to the static group Cisco 3750 f. Click Done g. Click Save 32 Dell Demo Center Dell Inc., 2016

33 8. Now the Groups have been created the next stage is to schedule a task against one of the groups created. For this stage please use the Static Group created in the previous steps. a. Select Resources Actions b. Search for Cisco c. Select Cisco show inventory d. Right click on the script and select Schedule e. Add a Description f. Under Associated Targets Click Add 33 Dell Demo Center Dell Inc., 2016

34 g. Highlight the OMNM-3750 h. Click Add Selection i. Click Done j. Click on the Schedule tab i. Under the Schedule tab ii. Select a Starting On value (Enter a time and date on which you want the operation to run) iii. How often the operation should recur Only Once iv. The Stopping ON option will be greyed out. k. Click Save 34 Dell Demo Center Dell Inc., 2016

35 l. To view the task execution and if it completed successfully navigate to the Details Section of the OMNM Browse to the History tab of the device and look under Execution History to see if the task completed successfully. m. Right click on the line relating to task you added. Select Execution Details displayed will be the result of the scheduled task you added under the Actions. An example is provided for reference below. 35 Dell Demo Center Dell Inc., 2016

36 3.1.8 Create Custom Scripts 1. Now we will create a custom script using the Adaptive CLI. Navigate to Resources view. Select Actions a. Right click on the bottom of the Actions Portlet b. Select New Adaptive CLI c. Enter a Name for the action e.g Yourname-CPU Stats and Debug d. Click on the Scripts tabs e. Click Add New Script 36 Dell Demo Center Dell Inc., 2016

37 f. Select Embedded CLI from the drop down menu g. Under Script Content enter the following commands show processes cpu debug cpu-traffic-stats show cpu-traffic-stats show processes ipc flow-control cp show proc memory show tech-support h. Click Apply i. Click Save 2. Once the script has been created we need to select the devices on which we want to execute the script then run it. a. Search for the script you created Yourname-CPU Stats and Debug b. Right click on the custom ACLI script and select View Script c. Right Click the custom ACLI script and select Import/Export (This give you the ability to share your custom scripts with other on in your company, helps you save time and money by automating the repetitive tedious tasks network admins perform daily) d. Click History this will tell you how many times the script has been used and what the results were. e. Right Click the script and select Execute 37 Dell Demo Center Dell Inc., 2016

38 f. Click and Select OMNM-N4000 g. Click Done 3. Once the script has executed a popup windows will appear with the results displayed. An example is provided below. 4. OpenManage Network Manager provides the user with the capability to create customized reports of the environment they are monitoring. OMNM has a number of defined report templates that can be used. Now we will undertake the task of creating a report based on the environment which we have access to. a. Click on Reports b. Right click on the Firmware Report c. Select the Schedule Option d. Please complete the fields listed i. Start On ii. Recurrence Only Once iii. Stopping On if applicable 38 Dell Demo Center Dell Inc., 2016

39 e. Select the Input tab. Here can be seen the options available for the output type of the report. Have a browse of the options and then select Save. We will be using the default option of PDF f. Click Save g. When the task has completed select the My Alert/Action History at the bottom of the OMNM webpage. From this panel you can view the report generated from the Scheduled task. 39 Dell Demo Center Dell Inc., 2016

40 5. Reports within OMNM can be schedule to run or they can be executed by right clicking a selecting Execute on the particular report in question. a. As an example let us run the Interface Report. Right Click on the report and select Execute. The report will now run b. We the report is read check the My Alerts to view the report. 40 Dell Demo Center Dell Inc., 2016

41 6. Please spend some time exploring and reviewing the different reporting options available within OMNM SFLOW and using Traffic Flow Analysis The following section will look at SFLOW and how it can be used within OMNM for traffic flow analysis. We will be using the switches which were discovered during the intial discovery at the start of the demo: - OMNM-S60 - OMNM-N4000 The necessary configuration has already been applied to the switches to enable SFLOW monitoring. The configuration can be reviewed by logging into the switches. 1. The task to be undertaken is to register the devices with OMNM for SFLOW monitoring. To do this select Resources and find the the three devices under Managed Resources a. Right click on the first device select Traffic Analyzer and Register 41 Dell Demo Center Dell Inc., 2016

42 b. Repeat the steps for the other device that has been added. 2. Once the devices have been registered the next stage is to start generating traffic load between the devices. For this task we will use iperf to generate the load. There are two shortcuts on the desktop a. iperfserver double click this shortcut to launch the iperf server b. iperfclient double click this shortcut to launch the iperf client. The client will intiate bidirection traffic 42 Dell Demo Center Dell Inc., 2016

43 The iperf traffic generation will run for approximately 30 minutes. 3. As part of the iperf traffic generation alerts should appear in the Alarms portlet on the under Home. This alarms are being generated because of the high bandwith utilization on the ports attached to both the client and server. These alarms will appear after 5 or 10 minutes of traffic flow. 4. To view the traffic flow of a device go to the Resources view. Under the Managed Resources portlet right click on one of the devices for example OMNM-#-S60 and go to Traffic Analyzer Show Traffic. a. A new page will appear detailing the traffic flows for the device. There is a dropdown list which enables closer examination of the device. It provides a number of options: i. Endpoints Detail ii. Top 5 Applications iii. Top 3 Autonomous Systems iv. Top 5 Conversations v. Top 5 Protocols 43 Dell Demo Center Dell Inc., 2016

44 5. Select Traffic Flow this will open the Traffic Flow view. Within this page there are various portlets. This view provides the Top 5 devices based on all Sflow monitoring sessions Network View The OpenManage Network Manager Network View provides a visual representation of the network. It provides detail on the health status of the environment. Device are colour coded to represent their health status. 44 Dell Demo Center Dell Inc., 2016

45 1. Click on the Network View. Note: Links will only show up, if you have properly configured LLDP on your switches and selected to run LLDP during discovery. If you configure LLDP after discovering your devices, you can run link discovery, this will add your links to network topology view. 2. The first tool you see in the upper left hand corner is the Toggle Design mode. This enables additional tools on the upper right hand side. It also allows you the ability to upload any type of image to use as your background. 3. The 3 rd tool from the top left is the Portlet Setting this allows you to select anyone of your previously saved network topology views, so that you can set them as default view. 4. Shorted Path Tool is the 7 th tool from the top left. If you highlight any device and hold down Shift and click on another device, it will outline the shortest path for those two particular devices. 5. In the middle of the tools, you will notice a Views section, this is where you will save your network topology and or retrieve your network topologies. 6. The last two tools are Clear and Add. The Clear tab will remove all elements from the graph. The Add tool will allow you to add labels or Cloud as seen in the snapshot above. 7. If you mouse over any of the nodes that have an alarn, you can easily see what the alarm severity is and what the A-endpoint and Z-endpoints are. 45 Dell Demo Center Dell Inc., 2016

46 8. If you mouse over any links you will see what port it is coming from and going to which assists with troubleshooting port issues 46 Dell Demo Center Dell Inc., 2016

47 9. On any of the device nodes you can right click and either Drill In or expand them. 10. OMNM has a concept of Active Links. a. Click on any device in the network with and active link. b. All Active Links for the switch you highlighted will be displayed under Links c. You can easily see your Ip Address, Port with A End Point and Z End Point Resource d. Right click on any of the Active Links and select Details. This will provide you will the physical address of the port for port mapping or to view all alarms associated with the port and switch 47 Dell Demo Center Dell Inc., 2016

48 Alarms and Events 1. Click on Alarms a. Under Alarms you have recent alarms displayed and Event History b. Right click on any alarm c. Click Acknowledge Alarm (There is also the option to Clear Alarms, view Details or Assign the alarm to a team member. ing an alarm is also any option. d. Click on Details. Information and Performance relating to the device will be displayed 48 Dell Demo Center Dell Inc., 2016

49 2. We will now cover Events and Definitions a. Click on Alarms - Definitions and Rules b. Under Event Definitions search for VLAN c. Right click on wslxvlanlinkup d. Scroll down to Set Behaviour. Then following options are provided: i. Alarm ii. Suppress iii. Reject e. Right Click on wlsxvlanlinkup f. Scroll down to Set Severity. You will see the following options i. Cleared ii. Informational iii. Indetermintate iv. Warning v. Minor vi. Critical NOTE: You can highlight this section with your customer and let them know that the Definitions and Rules are all customizable based on their customers current need. Example, customer does not 49 Dell Demo Center Dell Inc., 2016

50 believe per his company s policy that a link down is not a critical event. You can show them how easy it is to change the severity of an alarm from critical to major. 50 Dell Demo Center Dell Inc., 2016

Demo Lab Guide OS 9 Emulator

Demo Lab Guide OS 9 Emulator Demo Lab Guide OS 9 Emulator Quick Start Guide Example OSPF Configuration Product Domain: Networking Author: Ruairi Mongan Version: 1.01 Date: 01/01/2016 Table of Contents 1 Product Overview... 3 1.1 Lab

More information

Demo Lab Guide OpenManage Essentials

Demo Lab Guide OpenManage Essentials Demo Lab Guide OpenManage Essentials OpenManage Essentials and Support Assist Product Domain: Server Author: Ian O Gorman Version: 1.01 Date: 12/02/2016 Table of Contents 1 Product Overview... 3 1.1 Lab

More information

Demo KACE K1000 System Management Appliance

Demo KACE K1000 System Management Appliance Demo KACE K1000 System Management Appliance Quick Start Guide Product Domain: Cloud Client Computing Author: Dan Coleman Version: 1.01 Table of Contents 1 Product Overview... 3 1.1 Lab Preparation Considerations

More information

Demo Lab Guide Compellent

Demo Lab Guide Compellent Demo Lab Guide Compellent Replay Manager SQL Server Product Domain: Storage Author: Joseph Correia Version: 1.01 Date: 28/01/2016 Table of Contents 1 Product Overview... 3 1.1 Lab Preparation Considerations

More information

Demo Lab Guide vworkspace

Demo Lab Guide vworkspace Demo Lab Guide vworkspace Product Domain: Cloud Client Computing Author: Dan Coleman Version: 1.01 Table of Contents 1 Product Overview... 4 1.1 Lab Preparation Considerations and Caveats... 4 2 Introduction...

More information

10 BEST PRACTICES TO STREAMLINE NETWORK MONITORING. By: Vinod Mohan

10 BEST PRACTICES TO STREAMLINE NETWORK MONITORING. By: Vinod Mohan 10 BEST PRACTICES TO STREAMLINE NETWORK MONITORING By: Vinod Mohan 10 Best Practices to Streamline Network Monitoring Introduction As a network admin, you are tasked with keeping your organization s network

More information

Demo Lab Guide TechDirect

Demo Lab Guide TechDirect Demo Lab Guide TechDirect Product Domain: Cloud Client Computing Author: David Aherne Version: 1.01 Table of Contents 1 Product Overview... 3 1.1 Lab Preparation Considerations and Caveats... 3 2 Introduction...

More information

KACE K2000 System Deployment Appliance Demo Guide

KACE K2000 System Deployment Appliance Demo Guide KACE K2000 System Deployment Appliance Demo Guide Product Domain: Cloud Client Computing Author: Dan Coleman Version: 1.01 Table of Contents 1 Product Overview... 3 1.1 Lab Preparation Considerations and

More information

Introduction to Cisco UCS Central

Introduction to Cisco UCS Central Introducing Cisco UCS Central, page 1 Introducing Cisco UCS Central Cisco UCS Central provides scalable management solution for growing Cisco UCS environment. Cisco UCS Central simplifies the management

More information

WhatsUp Gold. Evaluation Guide

WhatsUp Gold. Evaluation Guide WhatsUp Gold Evaluation Guide Table of Contents This guide provides and overview of WhatsUp Gold. Refer to our Online Help for more details. Section Step 1: Getting Started Description Installation requirements

More information

WhatsConfigured for WhatsUp Gold 2016 User Guide

WhatsConfigured for WhatsUp Gold 2016 User Guide WhatsConfigured for WhatsUp Gold 2016 User Guide Contents Welcome to WhatsConfigured 1 What is WhatsConfigured? 1 Finding more information and updates 1 Sending feedback 2 Deploying WhatsConfigured 3 STEP

More information

Demo Lab Guide Network Function Virtualization

Demo Lab Guide Network Function Virtualization Demo Lab Guide Network Function Virtualization (HOL) Hands-On Lab Guide Deploying Virtualized IP Multimedia Subsystems in an OpenStack Environment Product Domain: Network Author: NFV Product Engineering

More information

ForeScout Extended Module for Tenable Vulnerability Management

ForeScout Extended Module for Tenable Vulnerability Management ForeScout Extended Module for Tenable Vulnerability Management Version 2.7.1 Table of Contents About Tenable Vulnerability Management Module... 4 Compatible Tenable Vulnerability Products... 4 About Support

More information

Cisco Unified Serviceability

Cisco Unified Serviceability Cisco Unified Serviceability Introduction, page 1 Installation, page 5 Introduction This document uses the following abbreviations to identify administration differences for these Cisco products: Unified

More information

OpenManage Power Center Demo Guide for https://demos.dell.com

OpenManage Power Center Demo Guide for https://demos.dell.com OpenManage Power Center Demo Guide for https://demos.dell.com Contents Introduction... 3 Lab 1 Demo Environment... 6 Lab 2 Change the default settings... 7 Lab 3 Discover the devices... 8 Lab 4 Group Creation

More information

Get Started with Cisco DNA Center

Get Started with Cisco DNA Center About Cisco DNA Center, on page 1 Log In, on page 1 Log In for the First Time as a Network Administrator, on page 2 Default Home Page, on page 3 Use Global Search, on page 5 Where to Start, on page 6 About

More information

Evaluation Guide for SNMPc v7.0

Evaluation Guide for SNMPc v7.0 Evaluation Guide for SNMPc v7.0 Introduction Thank you for downloading the SNMPc evaluation, in order to allow you to evaluate the product quickly and easily we have prepared this short guide. The purpose

More information

Add and Organize Devices

Add and Organize Devices This chapter contains the following topics: Add Devices to Prime Infrastructure, on page 1 Import Devices from Another Source, on page 7 Create Device Import CSV Files, on page 7 Add Devices Manually (New

More information

NetBrain Instant Trial Edition 5.2. Quick Start Workbook

NetBrain Instant Trial Edition 5.2. Quick Start Workbook NetBrain Instant Trial Edition 5.2 Quick Start Workbook NetBrain ITE 5.2 Quick Start Workbook Thank you for downloading NetBrain Instant Trial Edition (ITE). This workbook will help you make the most of

More information

NetBrain POC Walk-Through

NetBrain POC Walk-Through NetBrain POC Walk-Through For OE 4.1 Dynamic Documentation Visual Troubleshooting NetBrain Technologies, Inc. 2004-2013. All rights reserved +1.800.605.7964 support@netbraintech.com www.netbraintech.com

More information

AuditConfigurationArchiveandSoftwareManagementChanges (Network Audit)

AuditConfigurationArchiveandSoftwareManagementChanges (Network Audit) This section contains the following topics: Audit Configuration Archive and Software Management Changes (Network Audit), on page 1 Audit Changes Made By Users (Change Audit), on page 1 Audit Actions Executed

More information

KYOCERA Net Admin User Guide

KYOCERA Net Admin User Guide KYOCERA Net Admin User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable

More information

Cisco Unified Service Statistics Manager 8.7

Cisco Unified Service Statistics Manager 8.7 Deployment Guide Cisco Unified Service Statistics Manager 8.7 Deployment Best Practices For further information, questions and comments please contact ask-ucms@cisco.com 2012 Cisco and/or its affiliates.

More information

Dell EMC OpenManage Mobile. Version 3.0 User s Guide (Android)

Dell EMC OpenManage Mobile. Version 3.0 User s Guide (Android) Dell EMC OpenManage Mobile Version 3.0 User s Guide (Android) Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION

More information

SPS Commerce Dashboards & Alerts User Guide

SPS Commerce Dashboards & Alerts User Guide SPS Commerce Dashboards & Alerts User Guide 1 Table of Contents Introduction... 3 Additional Resources... 3 Logging In... 4 Changing your password... 4 The Portal Homepage... 5 Administration... 5 My Reports...

More information

Configure Controller and AP Settings

Configure Controller and AP Settings Configure SNMP Credentials for Rogue AP Tracing, on page 1 Configure Protocols for CLI Sessions, on page 2 Enable Unified AP Ping Reachability Settings on the Prime Infrastructure, on page 2 Refresh Controllers

More information

Demo Lab Guide Data Protection Encryption DDP

Demo Lab Guide Data Protection Encryption DDP Demo Lab Guide Data Protection Encryption DDP Product Domain: Cloud Client Computing Author: David Aherne Version: 1.01 Table of Contents 1 Product Overview... 3 1.1 Lab Preparation Considerations and

More information

Overview of Cisco Prime Collaboration Assurance

Overview of Cisco Prime Collaboration Assurance Overview of Cisco Prime Collaboration Assurance Cisco Prime Collaboration is a comprehensive video and voice service assurance and management system with a set of monitoring, troubleshooting, and reporting

More information

Dell EMC OpenManage Mobile. Version User s Guide (Android)

Dell EMC OpenManage Mobile. Version User s Guide (Android) Dell EMC OpenManage Mobile Version 2.0.20 User s Guide (Android) Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION

More information

Easy Setup Guide. Cisco FindIT Network Probe. You can easily set up your FindIT Network Probe in this step-by-step guide.

Easy Setup Guide. Cisco FindIT Network Probe. You can easily set up your FindIT Network Probe in this step-by-step guide. Cisco FindIT Network Probe Easy Setup Guide You can easily set up your FindIT Network Probe in this step-by-step guide. 1 5 System Requirements Installing Probe Configuring Probe Using Probe Connecting

More information

NMS300 Network Management System Application

NMS300 Network Management System Application NMS300 Network Management System Application Quick Start Guide October 2013 202-11288-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. After installing

More information

Online Help StruxureWare Data Center Expert

Online Help StruxureWare Data Center Expert Online Help StruxureWare Data Center Expert Version 7.2.7 What's New in StruxureWare Data Center Expert 7.2.x Learn more about the new features available in the StruxureWare Data Center Expert 7.2.x release.

More information

WhatsConfigured v3.1 User Guide

WhatsConfigured v3.1 User Guide WhatsConfigured v3.1 User Guide Contents Table of Contents Welcome to WhatsConfigured v3.1 Finding more information and updates... 1 Sending feedback... 2 Deploying WhatsConfigured STEP 1: Prepare the

More information

Demo Lab Guide 4Ward Cloud In-A- Box

Demo Lab Guide 4Ward Cloud In-A- Box Demo Lab Guide 4Ward Cloud In-A- Box 4Ward Cloud In-A-Box powered By Dell Cloud Foundation (VTRX) Product Domain: Server Author: Ian O Gorman Version: 1.01 Date: 21/11/15 1 Dell Demo Center https://demos.dell.com

More information

NetBrain Technologies Inc. NetBrain Consultant Edition. Quick Start Guide

NetBrain Technologies Inc. NetBrain Consultant Edition. Quick Start Guide NetBrain Technologies Inc. NetBrain Consultant Edition Quick Start Guide Content 1. Install NetBrain Workstation CE System... 3 1.1 Install and Activate NetBrain Gateway Server... 5 1.2 Install Workstation...

More information

Lenovo ThinkAgile XClarity Integrator for Nutanix Installation and User's Guide

Lenovo ThinkAgile XClarity Integrator for Nutanix Installation and User's Guide Lenovo ThinkAgile XClarity Integrator for Nutanix Installation and User's Guide Version 1.0 Note Before using this information and the product it supports, read the information in Appendix A Notices on

More information

Manage Your Inventory

Manage Your Inventory About Inventory About Inventory, on page 1 Inventory and Cisco ISE Authentication, on page 2 Display Information About Your Inventory, on page 2 Types of Devices in the DNA Center Inventory, on page 6

More information

Data Collection and Background Tasks

Data Collection and Background Tasks This section contains the following topics: Control Data Collection Jobs, on page 1 How Data Retention Settings Affect Web GUI Data, on page 1 About Historical Data Retention, on page 2 Performance and

More information

NetBackup 7.6 Replication Director A Hands On Experience

NetBackup 7.6 Replication Director A Hands On Experience NetBackup 7.6 Replication Director A Hands On Experience Description Through this hands on lab you can test drive Replication Director and experience for yourself this easy to use, powerful feature. Once

More information

Monitoring WAAS Using WAAS Central Manager. Monitoring WAAS Network Health. Using the WAAS Dashboard CHAPTER

Monitoring WAAS Using WAAS Central Manager. Monitoring WAAS Network Health. Using the WAAS Dashboard CHAPTER CHAPTER 1 This chapter describes how to use WAAS Central Manager to monitor network health, device health, and traffic interception of the WAAS environment. This chapter contains the following sections:

More information

McAfee Security Management Center

McAfee Security Management Center Data Sheet McAfee Security Management Center Unified management for next-generation devices Key advantages: Single pane of glass across the management lifecycle for McAfee next generation devices. Scalability

More information

This section contains context-sensitive Online Help content for the Web Client > Dashboard tab.

This section contains context-sensitive Online Help content for the Web Client > Dashboard tab. This section contains context-sensitive Online Help content for the Web Client > tab. Summary, page 1 Network, page 6 Storage, page 9 Compute, page 15 Summary The intent of the Summary dashboard is to

More information

Use Plug and Play to Deploy New Devices

Use Plug and Play to Deploy New Devices About Plug and Play, page 1 Prerequisites for Using Plug and Play, page 2 Plug and Play Workflow, page 2 Use the Plug and Play Dashboard to Monitor New Device Deployments, page 4 Create Plug and Play Profiles

More information

Utilizing Advanced Scheduling with Network Manager

Utilizing Advanced Scheduling with Network Manager Utilizing Advanced Scheduling with Network Manager Dell OpenManage Network Manager Kyon Holman Software Engineer PowerConnect Engineering PowerConnect December 18, 2003 Contents Section 1... 4 Introduction...

More information

User s Manual. Version 5

User s Manual. Version 5 User s Manual Version 5 Copyright 2017 Safeway. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,

More information

DEPLOYING BASIC CISCO WIRELESS LANS (WDBWL)

DEPLOYING BASIC CISCO WIRELESS LANS (WDBWL) [Type a quote from the document or the summary of an interesting point. You can position the text box anywhere in the document. Use the Drawing Tools tab to change the formatting of the pull quote text

More information

Demos.Dell.com Guide: SupportAssist for Servers or with OpenManage Essentials

Demos.Dell.com Guide: SupportAssist for Servers or with OpenManage Essentials Demos.Dell.com Guide: SupportAssist for Servers or with OpenManage Essentials This guide is to help you confidently deliver Dell SupportAssist for Enterprise demos! Review the guide and practice the demo

More information

EMCO Ping Monitor Enterprise 6. Copyright EMCO. All rights reserved.

EMCO Ping Monitor Enterprise 6. Copyright EMCO. All rights reserved. Copyright 2001-2017 EMCO. All rights reserved. Company web site: emcosoftware.com Support e-mail: support@emcosoftware.com Table of Contents Chapter... 1: Introduction 4 Chapter... 2: Getting Started 6

More information

Bill Analyser User Guide

Bill Analyser User Guide Bill Analyser User Guide emobile.ie/business Contents 1.0 Basic Concepts... 3 1.1 Users and Roles... 3 Standard Users... 3 Global Users... 3 eircom User Roles... 3 Available user roles... 3 1.2 Data Structure...

More information

Perform Configuration Audits Using Compliance

Perform Configuration Audits Using Compliance How To Perform a Compliance Audit, page 1 Enable and Disable Compliance Auditing, page 2 Create a New Compliance Policy, page 2 Create Compliance Policy Rules, page 3 Create a Compliance Profile That Contains

More information

HPE Intelligent Management Center

HPE Intelligent Management Center HPE Intelligent Management Center Service Health Manager Administrator Guide Abstract This guide provides introductory, configuration, and usage information for Service Health Manager (SHM). It is for

More information

vrealize Operations Management Pack for NSX for vsphere 2.0

vrealize Operations Management Pack for NSX for vsphere 2.0 vrealize Operations Management Pack for NSX for vsphere 2.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition.

More information

Dell EMC OpenManage Mobile. Version User s Guide (ios)

Dell EMC OpenManage Mobile. Version User s Guide (ios) Dell EMC OpenManage Mobile Version 2.0.20 User s Guide (ios) Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION

More information

Using the Prime Performance Manager Web Interface

Using the Prime Performance Manager Web Interface 3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager

More information

My Sysco Reporting Job Aid for CMU Customers. My Sysco Reporting. For CMU Customers (Serviced by Program Sales)

My Sysco Reporting Job Aid for CMU Customers. My Sysco Reporting. For CMU Customers (Serviced by Program Sales) My Sysco Reporting For CMU Customers (Serviced by Program Sales) 1 Accessing My Sysco Reporting... 2 Logging In... 2 The Reporting Dashboard... 3 My Sysco Reporting Process... 6 Generating a Report...

More information

NNMi120 Network Node Manager i Software 10.x Essentials

NNMi120 Network Node Manager i Software 10.x Essentials Course Data Sheet NNMi120 Network Node Manager i Software 10.x Essentials Course No.: NNMI120-101 Category/Sub Category: Operations Management/Network Management For software version(s): Software version

More information

Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 1.0

Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 1.0 Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 1.0 First Published: November 24, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com

More information

ForeScout Extended Module for HPE ArcSight

ForeScout Extended Module for HPE ArcSight ForeScout Extended Module for HPE ArcSight Version 2.7.1 Table of Contents About the HPE ArcSight Integration... 4 Use Cases... 4 Send Endpoint Status, Compliance, or Property Changes from CounterACT to

More information

User and System Administration

User and System Administration CHAPTER 2 This chapter provides information about performing user and system administration tasks and generating diagnostic information for obtaining technical assistance. The top-level Admin window displays

More information

Discovering Network Devices

Discovering Network Devices CHAPTER 5 To generate reports, Prime Performance Manager must discover your network devices. This is accomplished by importing the device inventory from Cisco Prime Network, running device discovery from

More information

Understanding the Relationship with Domain Managers

Understanding the Relationship with Domain Managers 4 CHAPTER Understanding the Relationship with Domain Managers Prime Central for HCS reports the events generated by underlying domain managers. Domain managers may also discover topology and relationships

More information

ForeScout Extended Module for ArcSight

ForeScout Extended Module for ArcSight Version 2.8 Table of Contents About the ArcSight Integration... 4 Use Cases... 4 Send Endpoint Status, Compliance, or Property Changes from CounterACT to ArcSight... 5 SmartConnector Health and Compliance

More information

Phone Inventory 1.1 (1012)

Phone Inventory 1.1 (1012) (1012) 2015 VoIP Integration July 28, 2015 Table of Contents Product Overview... 3 Requirements... 3 Application Requirements... 3 Call Manager... 3 Network Connectivity... 3 IP Phones... 3 Installation

More information

Centerity Monitor User Guide

Centerity Monitor User Guide Centerity Monitor 4.10 User Guide July 2018 Page 2 End-User License Agreement (EULA) This guide and the use of Centerity software is subject to Centerity s End-User License Agreement (EULA). A copy of

More information

OpenManage Management Pack for vrealize Operations Manager Version 1.1. Installation Guide

OpenManage Management Pack for vrealize Operations Manager Version 1.1. Installation Guide OpenManage Management Pack for vrealize Operations Manager Version 1.1 Installation Guide Notes, cautions, and warnings A NOTE indicates important information that helps you make better use of your product.

More information

VMware AirWatch: Directory and Certificate Authority

VMware AirWatch: Directory and Certificate Authority Table of Contents Lab Overview - HOL-1857-06-UEM - VMware AirWatch: Directory and Certificate Authority Integration... 2 Lab Guidance... 3 Module 1 - Advanced AirWatch Configuration, AD Integration/Certificates

More information

How to Slam Dunk a Network Assessment Using Auvik

How to Slam Dunk a Network Assessment Using Auvik How to Slam Dunk a Network Assessment Using Auvik Step 1 Define project scope Network assessments are an effective way to transition prospects and clients from the pitch phase to the purchase phase by

More information

HP Network Node Manager 9: Getting Started. Manage your network effectively with NNMi. Marius Vilemaitis. J enterprise PUBLISHING MUMBAI BIRMINGHAM

HP Network Node Manager 9: Getting Started. Manage your network effectively with NNMi. Marius Vilemaitis. J enterprise PUBLISHING MUMBAI BIRMINGHAM HP Network Node Manager 9: Getting Started Manage your network effectively with NNMi Marius Vilemaitis r PUBLISHING J enterprise BIRMINGHAM - MUMBAI Preface 1 Chapter 1: Before we Manage with NNMi 7 What

More information

Please review the Infoblox CCS Scripting Guide for more information on the above optional statements

Please review the Infoblox CCS Scripting Guide for more information on the above optional statements Overview Network engineers are always looking for ways to automate the tasks of maintaining network devices. Logging into network devices to make changes or to upgrade software is tedious, time consuming,

More information

Agent and Agent Browser. Updated Friday, January 26, Autotask Corporation

Agent and Agent Browser. Updated Friday, January 26, Autotask Corporation Agent and Agent Browser Updated Friday, January 26, 2018 2018 Autotask Corporation Table of Contents Table of Contents 2 The AEM Agent and Agent Browser 3 AEM Agent 5 Privacy Mode 9 Agent Browser 11 Agent

More information

User Manual. Version 5.8

User Manual. Version 5.8 User Manual Version 5.8 Information in this document is subject to change without notice. Copyright 2013-2018, Exacq Technologies, Inc. All rights reserved. Exacq Technologies is a trademark of Exacq Technologies,

More information

NetBrain Instant Trial Edition 5.1. Quick Start Workbook

NetBrain Instant Trial Edition 5.1. Quick Start Workbook NetBrain Instant Trial Edition 5.1 Quick Start Workbook NetBrain ITE 5.1 Quick Start Workbook Thank you for downloading NetBrain Instant Trial Edition (ITE). This workbook will help you make the most of

More information

Overview of Inventory Management

Overview of Inventory Management CHAPTER 1 Inventory Management in Cisco Prime LAN Management 4.1 groups the various activities in LMS involved in managing your inventory: your network devices. You can access these features from the Inventory

More information

SMC Cloud. Start-up Guide. (Instructions for Field Installers, Support and Administrator) APPLICABILITY & EFFECTIVITY

SMC Cloud. Start-up Guide. (Instructions for Field Installers, Support and Administrator) APPLICABILITY & EFFECTIVITY SMC Cloud Start-up Guide (Instructions for Field Installers, Support and Administrator) APPLICABILITY & EFFECTIVITY Explains SMC Cloud registration and use. The instructions are effective for the above

More information

Using Network Manager to Deploy Firmware and Backup/ Restore Configuration Files

Using Network Manager to Deploy Firmware and Backup/ Restore Configuration Files Using Network Manager to Deploy Firmware and Backup/ Restore Configuration Files Dell OpenManage Network Manager Kyon Holman Software Engineer PowerConnect Engineering PowerConnect November 17, 2003 Contents

More information

Configuring GNS3 for CCNA Security Exam (for Windows) Software Requirements to Run GNS3

Configuring GNS3 for CCNA Security Exam (for Windows) Software Requirements to Run GNS3 Configuring GNS3 for CCNA Security Exam (for Windows) Software Requirements to Run GNS3 From Cisco s website, here are the minimum requirements for CCP 2.7 and CCP 2.8: The following info comes from many

More information

Configuring APIC Accounts

Configuring APIC Accounts This chapter contains the following sections: Adding an APIC Account, page 1 Viewing APIC Reports, page 3 Assigning an APIC account to a Pod, page 15 Handling APIC Failover, page 15 Adding an APIC Account

More information

Unified CCX Administration Web Interface

Unified CCX Administration Web Interface The Unified CCX provides a multimedia (voice, data, and web) IP-enabled customer-care application environment, using VoIP technology that allows your Cisco Unified Communications network to share resources

More information

Overview. Introducing Cisco UCS Central. This chapter includes the following sections: Introducing Cisco UCS Central, page 1

Overview. Introducing Cisco UCS Central. This chapter includes the following sections: Introducing Cisco UCS Central, page 1 This chapter includes the following sections: Introducing Cisco UCS Central, page 1 Introducing Cisco UCS Central Cisco UCS Central provides scalable management solution for growing Cisco UCS environment.

More information

Scorebook Navigator. Stage 1 Independent Review User Manual Version

Scorebook Navigator. Stage 1 Independent Review User Manual Version Scorebook Navigator Stage 1 Independent Review User Manual Version 11.2013 TABLE OF CONTENTS Getting Started... 1 Browser Requirements... 1 Scorebook Navigator Browser Compatability... 1 Logging in...

More information

Legal Notes. Regarding Trademarks KYOCERA MITA Corporation

Legal Notes. Regarding Trademarks KYOCERA MITA Corporation Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from

More information

WhatsConnected v3.5 User Guide

WhatsConnected v3.5 User Guide WhatsConnected v3.5 User Guide Contents Table of Contents Welcome to WhatsConnected Finding more information and updates... 5 Installing and Configuring WhatsConnected System requirements... 6 Installation

More information

UCS-E160DP Double-wide E-Series Server, 6 core CPU, with PCIe

UCS-E160DP Double-wide E-Series Server, 6 core CPU, with PCIe Overview This chapter includes the following sections: Cisco UCS E-Series Servers Overview, page 1 Server Software, page 2 CIMC Overview, page 3 CIMC GUI, page 3 Cisco UCS E-Series Servers Overview The

More information

CSPC OVA Getting Started Guide

CSPC OVA Getting Started Guide S M A R T N E T T O T A L C A R E S U P P O R T T E A M CSPC 2.6.1 OVA Getting Started Guide Copyright 2016 Cisco Systems, Inc. Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose,

More information

Integration Guide. Auvik

Integration Guide. Auvik Integration Guide Auvik Revised: 27 February 2017 About This Guide Guide Type Documented Integration WatchGuard or a Technology Partner has provided documentation demonstrating integration. Guide Details

More information

Pure Storage FlashArray Management Pack for VMware vrealize Operations Manager User Guide. (Version with Purity 4.9.

Pure Storage FlashArray Management Pack for VMware vrealize Operations Manager User Guide. (Version with Purity 4.9. Pure Storage FlashArray Management Pack for VMware vrealize Operations Manager User Guide (Version 1.0.139 with Purity 4.9.x or higher) Sunday, November 27, 2016 16:13 Pure Storage FlashArray Management

More information

EMCO Ping Monitor Free 6. Copyright EMCO. All rights reserved.

EMCO Ping Monitor Free 6. Copyright EMCO. All rights reserved. Copyright 2001-2017 EMCO. All rights reserved. Company web site: emcosoftware.com Support e-mail: support@emcosoftware.com Table of Contents Chapter... 1: Introduction 3 Chapter... 2: Program Interface

More information

Running Reports CHAPTER

Running Reports CHAPTER CHAPTER 14 WCS reporting is necessary to monitor the system and network health as well as troubleshoot problems. A number of reports can be generated to run on an immediate and scheduled basis. Each report

More information

ForeScout Extended Module for ServiceNow

ForeScout Extended Module for ServiceNow ForeScout Extended Module for ServiceNow Version 1.2 Table of Contents About ServiceNow Integration... 4 Use Cases... 4 Asset Identification... 4 Asset Inventory True-up... 5 Additional ServiceNow Documentation...

More information

GWNMS NeDi. About NeDi. Configuring the NeDi Package. Managing User Access. Managing User Accounts

GWNMS NeDi. About NeDi. Configuring the NeDi Package. Managing User Access. Managing User Accounts GWNMS NeDi This section reviews the GroundWork Monitor NMS NeDi. About NeDi NeDi is an open source toolkit for managing network infrastructure devices such as switches and routers, and is integrated into

More information

Configuring the SMA 500v Virtual Appliance

Configuring the SMA 500v Virtual Appliance Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance

More information

Introduction to Cisco UCS Central

Introduction to Cisco UCS Central Introducing Cisco UCS Central, page 1 Introducing Cisco UCS Central Cisco UCS Central provides scalable management solution for growing Cisco UCS environment. Cisco UCS Central simplifies the management

More information

Centralized Log Hosting Manual for User

Centralized Log Hosting Manual for User Centralized Log Hosting Manual for User English Version 1.0 Page 1 of 31 Table of Contents 1 WELCOME...3 2 WAYS TO ACCESS CENTRALIZED LOG HOSTING PAGE...4 3 YOUR APPS IN KSC CENTRALIZED LOG HOSTING WEB...5

More information

User Guide for OmniVista 2500 NMS Enterprise Version R01 Maintenance Release 1

User Guide for OmniVista 2500 NMS Enterprise Version R01 Maintenance Release 1 User Guide for OmniVista 2500 NMS Enterprise Version 4.2.1.R01 Maintenance Release 1 February 2017 Revision A READ THIS DOCUMENT ALE USA Inc. 26801 West Agoura Road Calabasas, CA 91301 +1 (818) 880-3500

More information

NERC Compliance Use Cases

NERC Compliance Use Cases NERC Compliance Use Cases Overview For network and IT teams who work in the Energy sector, the North American Energy Reliability Corporation Critical Infrastructure Protection (NERC-CIP) standards provide

More information

User Workspace Management

User Workspace Management Access the Interface, page 1 User Management Workspace User Types, page 4 Projects (Admin User), page 5 Users (Admin User), page 9 CML Server (Admin User), page 11 Connectivity, page 30 Using the VM Control

More information

Viewing System Status, page 404. Backing Up and Restoring a Configuration, page 416. Managing Certificates for Authentication, page 418

Viewing System Status, page 404. Backing Up and Restoring a Configuration, page 416. Managing Certificates for Authentication, page 418 This chapter describes how to maintain the configuration and firmware, reboot or reset the security appliance, manage the security license and digital certificates, and configure other features to help

More information

Network Configuration Manager

Network Configuration Manager GETTING STARTED GUIDE Network Configuration Manager Version 7.9 Last Updated: Monday, December 10, 2018 GETTING STARTED GUIDE: NETWORK CONFIGURATION MANAGER 2018 SolarWinds Worldwide, LLC. All rights reserved.

More information

Setting up. Discovering the Network. Planning Discovery Runs CHAPTER

Setting up. Discovering the Network. Planning Discovery Runs CHAPTER CHAPTER 3 After you install Prime NCS (WAN) and launch the browser, read the following sections to learn how to get started using Prime NCS (WAN): Discovering the Network, page 3-1 Setting Up Site Profiles,

More information

vrealize Operations Management Pack for NSX for vsphere 3.5.0

vrealize Operations Management Pack for NSX for vsphere 3.5.0 vrealize Operations Management Pack for NSX for vsphere 3.5.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition.

More information