1 VeCOAX Micromod MS Advanced Wall Mount HD Video Modulator REFERENCE GUIDE 2014 Advanced model with also USB Recording and PLAY Capabilities, 1080P input over both mpeg2 and mpeg4 modes, low latency encoding and the newest mpeg4 h264 US TV standard mode
2 User Manual Thank you for buying this VeCOAX Micromod. Please read this manual carefully to install, use and maintain the VeCOAX Micromod in the best conditions of performance. Keep this manual for future reference. Directory CHAPTER 1 Product Introductions... 3 General Description... 3 Technical Specifications... 4 CHAPTER 2 Safety Instruction and Installations... 6 Safety Instructions... 6 Installations... 7 Chapter 3 Operations of TS Creator Software Installation Operations of Creator File Management CHAPTER 4 Operations and Management Chapter 5 Operations of Record TS and Play TS through USB Disk Appendix... 23
3 CHAPTER 1 Product Introductions General Description VECOAX MICROMOD is PROVIDEOINSTRUMENTS s consumer electronics which allow audio/video signal input in TV distributions and video recorded and playback through a USB port with applications in home entertainment, hotel Digital Signage, shops etc. It is an all-in-one device integrating MPEG2 HD/SD & MPEG4 AVC/H.264 HD/SD encoding and modulating to convert video/audio signals to DIGITAL CABLE RF out. The signals source could be from satellite receivers, closed-circuit television cameras, Blue-ray players, and *.ts files created on PC with our TS Creator.exe. Its output signal is to be received by DIGITAL CABLE TVs or DIGITAL CABLE STBs etc. Control Buttons and LCD Window Composite Video Input via RCA (CVBS) HDMI Input Component Video Input via RCA (YPbPr) Left/Right Audio Input DC 12V Power in RF in RF out USB Port for Video Record, Save, Playback and System Upgrade
4 Technical Specifications Encoding Section Encoding MPEG-2, MPEG-4 AVC/H.264 Interface HDMI*1 Video 1920*1080_60P, 1920*1080_50P (for MPEG-4 AVC/H.264 only) Resolution 1920*1080_60i, 1920*1080_50i; 1280*720_60p, 1280*720_50P HDMI Bit rate 1.000~ Mbps Encoding MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC Audio Interface Sample rate HDMI 48KHz Bit rate 64, 96,128, 192, 256, 320, 384kbps Encoding MPEG-2, MPEG-4 AVC/H.264 Interface CVBS *1, YPbPr*1 YPbPr/ CVBS Video Resolution Bit rate CVBS: 720x576_50i (PAL); 720x480_60i (NTSC) YPbPr: 1920*1080_60i, 1920*1080_50i; 1280*720_60p, 1280*720_50P 1.000~ Mbps Encoding MPEG1 Layer II, MPEG2-AAC, MPEG4-AAC Audio Interface 1*Stereo /2 mono Sample rate 48KHz Bit rate 64, 96,128, 192, 256, 320, 384kbps Modulator Section Standard J.83A EUROPE J.83B USA J.83C JP Constellation 16/32/64/128/256QAM 64/ 256QAM 64/ 256QAM Bandwidth 8M 6M 6M MER 43dB RF frequency 30~960MHz, 1KHz step RF output level -16~ -36dbm(71~91 dbµv), 0.1db step Symbol rate Ksps - ( 6900 EUROPE ) System Management Language LCN Insertion General Local control: LCD + control buttons English yes Power supply DC 12V Dimensions 144*238*52mm Weight Approx 1kg Operation temperature 0~45
6 CHAPTER 2 Safety Instruction and Installations Safety Instructions WARNING: Hot plug is not allowed since it may cause system halted. To prevent fire or electrical shock, do not expose the device to rain or moisture. The VeCOAX Micromod is powered with a voltage of 12V DC. The power supply voltage must not exceed the recommended voltage, which otherwise may cause irreparable damage to the device and the invalidation of the warranty. Therefore: Do not replace power supply with a voltage greater than 12V DC. Do not connect the device to the power if the power cord is damaged. Do not plug the device into mains supply until all cables have been connected correctly. Do not cut the cord. Avoid placing the device next to central heating components and in areas of high humidity. Do not cover the device with elements that obstruct the ventilation slots. If the VeCOAX Micromod has been kept in cold conditions for a long time, keep it in a warm room minimum 2 hours before plugging into the mains. Mount the device in vertical position with the connectors located on the top side. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutes may result in fire, electric shock or other hazards. Safety check- Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the device is in proper condition.
7 Installations RISK of damage to the unit Mechanically handling the unit may result in damage. Do not connect the unit to the power supply before or during assembly. Connect the unit as below instructed. NO HOT PLUG AND CONNECT THE CABLE AS FOLLOWING STEPS. 1. Mount and tighten the screws and plugs to secure the unit to the wall. Left 10 cm of free space around from each unit Connect the signal input in the respective connectors. The signal source can be from a surveillance monitor, DVD, set-top box, CCTV and etc. 3. Optionally, connect the loop-through RF input coaxial cable. 4. Connect cable to RF output to STB/TV. 5. Power supply connection: a) Connect the earth 4 3 cable; b) Connect the power plug to the unit mains connector; c) Connect the power plug to the mains socket. 2 5
8 Cascade Installation VECOAX MICROMOD unit has 1 TV signal to RF output encoded as DIGITAL CABLE Digital TV signal. Several VECOAX MICROMOD units can be cascaded in order to increase the capacity. The maximum capacity of a series of N units is 1xN incorporated TV signals. To cascade 2 or more units, connect the RF output of the preceding unit to the TV input (loop-through) of the next unit (see right illustration).
10 Chapter 3 Operations of TS Creator Software VECOAX MICROMOD has a function to record and play TS video files created by any Video Editing Software ( MPEG2 format for US TVs or MPEG / H264 Formats for international TVs ). Users can also create *.ts files containing images, videos and audios in a simple and intuitive way, and play them on a television through VECOAX MICROMOD s USB port using our CREATOR software. File format supported include: Image: JPG, PNG, BMP, GIF/Video: MP4, WMV, AVI, MPG, TS, MKV /Audio: MP3, WAV Installation Download our creator software from 1. Download our TS Creator software package on your PC to get the installer and its auxiliary routine. 2. Occasionally, if your PC hasn t installed Net Frame 2.0 yet, double-click NetFx20SP2_x86.exe until complete the installation. 3. Double-click Setup.exe application to install the Creator and generate a desktop shortcut.
11 Operations of Creator Double-click the Creator shortcut icon, it will trigger an operation interface like below: Click to add Images and videos Click to adjust the order of Images/videos Click to delete the Images/videos Click to add audios Click to set a save path for the TS video to be created. To set the playing time for pictures you insert.
12 To set the resolution for the output video The video is transformed based on VBR (Variable Bit Rate). The number set here represents the highest bit rate for the output video and bit rate will varies under the number. Users can select a encode format here according to the standard of receiving terminal. Users can filter the null packet to boost the video s effect bit rate. A single video can be maximum 2.0 GB in size. (VECOAX MICROMOD cannot play a video bigger than 2GB.) After setting all the parameters, click to start the transformation. Click OK when it prompts The operation completed normally. Click this button to stop the transformation before the operation completed. After finishing the transform operation, users can click this button to play the generated TS video.
13 File Management After finishing the transformation, users can find out the videos files generated according the Saving Directory. For example, we save the video in D:\ABC so we can find it in Disk D\Folder ABC. Management: 1. Three files will be generated if the Null Packet has been filtered. 2. Two files will be generated if the Null Packet has not been filtered. Remarks: All the file names are automatically generated. Rename the files before creating a new video to avoid covering the previous files. If you rename FinalOutput ts or FinalOutput tsinfo, always keep the names the same (Extension excluded) and then VECOAX MICROMOD can read them and play the video TS video for preview through the Creator interface by clicking Play button TS video and information files: Users need to save the two files together in the USB memory, and then MICROMOD can read them and play the video. TS video for preview through the Creator interface by clicking Play button TS video: Users need to save it in the USB memory, and then MICROMOD can read it and play the video.
14 CHAPTER 4 Operations and Management VECOAX MICROMOD is controlled and managed through the key board and LCD display. LCD Display It presents the selected menu and the parameter settings. The backlight in the display is on when the power is applied. LED These lights indicate the working status Power: It lights on when the power supply is connected. Alarm: It lights on when the there is error, such as the signal source loss. Lock: It lights on when the signal source connected and goes off when the signal lose. Left/Right/Up/Down buttons Use these buttons to turn the screen pages, shift the target items by moving the triangle, or change the parameter settings in the program mode. Enter Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting the value of certain items with Up/Down buttons when the corresponding underline flash; Press it to activate the hidden selections and change the setting with Up/Down (or Left/ Right) buttons. Menu Press this button to step back Lock Locking the screen / cancelling the lock state, and entering the main menu after the initialization of the device. After pressing lock key, the system will question
15 the users to save present setting or not. If not, the LCD will display the current configuration state. When the power is connected, the LCD will start to initialize the program. The LCD menu goes as below chart.
18 1) DIGITAL CABLE: modulating standard; XX.XXX MHz: the current output frequency; U: symbol of the USB disk insertion; 1080i: video resolution of signal source; X.XX Mbps: the current encoding bit rate 2) Alarm Status: For example, if the signals lose, it will give alarm and display error type under this menu. For example: Video 1 Not Lock 3) Uptime: It displays the working time duration of the device. It times upon power on. 4) Video Parameters: User can enter the items respectively to set video parameters. Interface: select a right interface type from the options provided. The device then can automatically search the signal and starts to encode. Resolution: signal source resolution, read-only. Video Bit rate: DEFAULT = adjust in range of 1.000~ Mbps. Video Format: DEFAULT = MPEG2 - this unit supports mpeg2 and h.264 video encoding format in CBR/VBR bitrate control mode. User can also adjust values of rest items (Brightness & Contrast & Saturation: 0-255; Hue: ) 5) Audio Bit rate: Select audio bit rate among 64, 96, 128, 192, 256, 320, 384 kbps. Audio Format: Select audio format among MPEG2, MPEG2-AAC and MPEG4-AAC. 6) Program Information: User can enable or disable the program output under menu Program Output. User can also enter the other items to edit the Service Name, Program Name, Program Number, and PIDs of PMT, PCR, Video and Audio, and edit LCN (Logical channel number). EIT Event User can enter this menu to setup EIT (Event Information Table) for the current and next program event. The EIT contains Start Year, Start Time, Duration, and Event Name of the event. All the EIT information can be displayed on the TV screen on condition that the EIT is chosen to insert (see explanation 18.). VCN User can enter its submenus to setup the VCN (Virtual Channel Number) information. 7) Standard: J.83B AMERICAN QAM - DEFAULT or select J.83A (EUROPEAN DIGITAL CABLE), or J.83C. 8) Constellation: DEFAULT = 64 DIGITAL CABLE modulator contains 3 modulating standards. Different standard involves different modulating constellations. See the specification table for details. 9) Symbol Rate: adjust the symbol rate at the range of Ksps. 10) RF Frequency: DEFAULT = 195 = CHANNEL 10 US CABLE
19 Adjust it at range of 30 to 999 MHz. Set it according your regional situation or inquire your local services. 11) RF Level: Adjust it at range of -16~ -36dBm. 12) RF On: User can choose to turn on or turn off the RF under this menu. 13) Bit Rate: User can read the current modulating bit rate and the maximum bit rate 14) TSID: (Transport Stream ID) User can view or adjust after enter this menu. 15) ONID: (Original Network ID)-User can view or adjust after enter this menu. 16) NIT: (Network Information Table) NIT table is a very important table for describing the network and TS. User can enter the submenus displayed and edit the values or select the LCN (Logical channel number) mode, and choose whether to insert the NIT. If user chooses to insert the NIT, information (Network ID, Network Name, LCN Mode, Private Data and LCN number of the program mentioned in explanation 6) will be added to the transport stream. NOTE: when the Private Data is set as 0*0, it is invalid. 17) VCT: Virtual Channel Table. This menu contains two sub-menus, Modulation Mode and VCT Insert. User can edit modulation mode at the range of Choose to insert the VCT when J.83B is applied as the modulation standard. 18) EIT: EIT Insert - As mentioned above (6), the event information table can be chosen whether to insert into the TS or not under this menu. If yes, the EIT information set above (6) will be displayed on the TV screen. Language Code to set the EIT language For example, code of the English language is eng. If you set the code as eng, the EIT displayed will be in English language. 19)-23) Please refer to Chapter 5 for details. 24) Save Config: Yes/No-to save/give up the adjustment of setting. 25) Load Saved CFG: Yes/No-to load/ not to load the saved configuration. 26) Factory Reset: Yes/No-choose/not choose the factory s default configuration. 27) LCD Time out: A time limit that LCD will light off. Choose among 5s, 10s, 45s, 60s, 90s and 120s (seconds). 28) Key Password: to set a 6-digit password for unlocking the keyboard. 29) Lock Keyboard: Choose Yes to lock the keyboard, then the keyboard will be locked and cannot be applicable. It is required to input the password to unlock the key
20 board. This operation is one-off. (Password forgotten, please use the universal code ) 30) Product ID: User can view the serial number of this device. It is read-only and unique 31) Version: It displays the version information of this device. VeCOAX Micromod: the name of the device; SW: software version number; HW: hardware version number. User can also press ENTER again to view the published time of this device.
21 Chapter 5 Operations of Record TS and Play TS through USB Disk The VECOAX MICROMOD VeCOAX Micromod has new functions of: 1. *.ts Video Creation See Chapter TS Record and Save 1) Connect the signal source, enter Start Record and choose Yes to start recording the encoded TS. 2) Advanced Config: File size: users can set the file size for the *.ts to be recorded. A single file can be maximum 2000M in size. Filter null PKT: Users can decide whether to filter the null packet for the *.ts files to be recorded. File save mode: there are 3 modes provided: single file (For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically stops recording TS.). Segmented file (For example, when the file size is set as 1000M and the *.ts is recorded up to 1000M, it automatically saves the files and continues to record TS and save it to next file until the USB memory is full.). Loop record : (it automatically saves the files and continues to record TS and save it to next file. When the USB memory is full, it replaces the previous files.) File name: Users can enter this menu to edit name for the *.ts files to be recorded. For example, if users name it Record-, it will give name to the saved *.ts files Record-001.ts, Record-002.ts Record-00N.ts. Automatic Record: Users can choose whether to set VECOAX MICROMOD record the TS automatically or manually.
22 3. TS Playback 1) File browse: There is a video list under this menu, choose one file and press Enter button to start play. 2) Play mode: User can select a play mode for the saved *.ts files as needed before playing the *.ts file. When the *.ts is being playing, VECOAX MICROMOD LCD will present a playing interface as shown below. single loop; play all; loop all; single file At this time, the key board also plays a different rule 4. Disk Usage Users can enter this menu to view the USB disk s capacity left. 5. Update Choose Yes to update the VECOAX MICROMOD with the update file stored in the USB disk.
23 6. Remove Device Choose Yes to safely remove the USB disk. VECOAX MICROMOD will then automatically resume encoding and playing the program input from the encoder module.
24 NORTH AMERICAN DIGITAL QAM CABLE TELEVISION CHANNELS / FREQUENCIES Channel Number Subband "T" Channels Lowband QAM / CDSREF Carrier (MHz) or or Midband Midband
HDM-500T DVB-T HD Encoder & User Manual Thank you for buying this encoder modulator. Please read this manual carefully to install, use and maintain the encoder modulator in the best conditions of performance.
SD ENCODER AND MODULATOR YPbPr & CVBS TO DVB-T DIGITAL RF SD4250 USER MANUAL All-in-one encoder and modulator for dual SD source. Allows 4 sets of Audio/Video source to be extended throughout a traditional
Signal-433 Network Encoder User Manual SW Version: 1.0 HW version: 1.0 Web NMS version: 1.0 About This Manual Intended Audience This user manual has been written to help people who have to use, to integrate
Trophy TA-1001HD DVB-C HDTV digital receiver Trophy-Access decoder Personal Video Recorder Contents Trophy TA-1001HD Device Operation 3 Specification 4 Front panel 5 Back panel 5 Remote control 6 Connection
NDS3543B DVB-S/S2 Encoder Modulator Product Overview Multiple interface optional NDS3543B DVB-S/S2 products are DEXIN s all-in-one devices which integrate encoding, multiplexing and modulation to convert
Web interface user guide MHD-202 REF. 3855 Dual HDMI input modulator DVB-T and IP output Index 4 Introduction 4 About this Manual 4 Product Description 5 Web interface connection 5 Ethernet configuration
TL240C Transparent Display User Manual Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves
AVerMedia AverDiGi EH5116 PRO Quick Installation Guide i SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY WARNING TO REDUCE
5.6" Multi-function Monitor User s Manual Please read this Manual carefully before use of this product, and keep it handy for future reference. I. Packing List.. 2 II. Product Appearance... 3-5 III. Product
SDI Digital Video Recorder Quick Operation Guide Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to HDDVRXXXX-SDI
CM 4HD-IP 082008 HD digital modulator-ip streamer 4 HDMI-IP User s Manual 2 1 CM 4HD-IP USER S MANUAL 1.1 General Description 2 1 3 Number Description 1 HDMI Inputs. Connection to the audio/video power
KM-31BK HD-Multimedia Player & Recorder www.kingwin.com 1 1. Introduction 1.1 Preface Dear Customer, Thank you for purchasing KM-31BK. In the digital age, this product is a great home entertainment system.
Manual Version UHBA1.0 Safety Instructions Please keep the display away from any heat sources. Place the display in a stable and well-ventilated place. Please handle with care as product contains glass.
Network Video Recorder Quick Operation Guide UD.6L0202B1057A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: KDS-EN3 HD Video Encoder/Streamer KDS-DEC3 HD Video Decoder P/N: 2900-300375 Rev 3 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance
Instruction Manual Duo Cinema Professional Automotive Rear Seat Entertainment System Regulatory Statements FCC Statement This device has been tested and found to comply with the limits for a Class B digital
HD DVB-T2 SET TOP BOX USER GUIDE SP1505-SS IMPORTANT SAFETY INSTRUCTIONS - The ventilation should not be impeded by covering the ventilation with items, such as newspapers, table-cloths, curtains, etc.;
55" (54.6" viewable) All-in-One Professional Display CDM5500R Physical deployment, content creation, and message delivery couldn t be easier than with the ViewSonic CDM5500R. Featuring an internal media
DATA SHEET H.264 Compressed Video over IP Encoder NMX-ENC-N3121 (FGN3121-SA), Stand Alone NMX-ENC-N3121-C (FGN3121-CD), Card Overview The N3000 Video over IP Series extends the reach of SVSI's Networked
Conceptronic CM3PVR User Manual Congratulations on the purchase of your Conceptronic Media Recorder & Player. This User Manual gives you a step-by-step explanation how to install and use the Conceptronic
DVP-731 USER MANUAL DVD/MPEG4/CD/MP3/PLAYER Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. For information and support, www.lenco.eu
Dual-Bay RAID Storage Enclosure for two 3.5-inch Serial ATA Hard Drives User Manual March 31, 2014 v1.2 www.inxtron.com EN Table of Contents Table of Contents 1 Introduction... 1 1.1 Technical Specifications...
NB100 Portable Encoder User s Manual V2.02-N Preface About This Manual This manual provides introductions to users about how to operate the device correctly. The content includes introduction to product
For Model No. MPQC 994 IPS EN User Manual This manual contains important safety precautions and information of correct use. Please be sure to read this manual carefully before use so as to avoid any accidents.
G4-234BT 2.4 TFT DISPLAY DAB/DAB+ RADIO CAR ADAPTER WITH FM TRANSMITTER & BLUETOOTH MUSIC STREAMING G4-2 3 4BT IMPORTANT: Please read the manual carefully before using the product and keep it for future
0 1 Table of Contents 1 OVERVIEW 1.1 Appearance and Keys 1.2 Basic Operation 1.2.1 Switch On 1.2.2 Unlock the screen 1.2.3 Lock the screen 1.2.4 Switch Off 1.2.5 Battery charging 1.2.6 Main interface 1.2.7
HDMI / DVI to Component / VGA with Audio Converter Model #: C -HDMI-COMPVGA 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview
Model BS-150 Video Inspection Camera Instruction Manual reedinstruments com Table of Contents Safety... 2 Features... 3 Specifications...3-4 Instrument Description... 5 Operating Instructions...6-8 Safety
The ViewSonic is a 10 multimedia all-in-one interactive digital eposter. It delivers eye-catching touchinteractive commercial messaging at retail POS, hotel lobbies and front desks, conference and exhibition
32" Full HD LED Commercial Display with Remote Control & USB Playback CDE3205 The ViewSonic CDE3205 is a great value 32 (31.5 viewable) Full HD LED commercial display with high reliability working time
32" (31.5" viewable) Full HD LED Commercial Display CDE3204 The ViewSonic CDE3204 is a great value, high performance 32 (31.5 viewable) Full HD LED commercial display for hotel, restaurant and hospitality
INSTRUCTION MANUAL 9.2 TFT LCD COLOR MONITORING SYSTEM With 2 Indoor/Outdoor Color Cameras MODEL: LCD0935 Copyright 2009 Wisecomm. All Rights Reserved. 1. IMPORTANT SAFETY PRECAUTIONS To prevent fire or
aaxa TECHNOLOGIES P2jr Pico Projector User Guide Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces.
Monochrome Camera LTC0330/11 LTC0330/21 LTC0350/11 LTC0350/21 LTC0330/51 LTC0330/61 LTC0350/51 LTC0350/61 Features To obtain the best results from your new camera, read these instructions carefully before
USER GUIDE HD3000 Contents GENERAL INFORMATION Main Features For your Safety Unpacking General Operation RCU Front Panel Rear Panel 1 2 3 3 4 5 5 1 INSTALL ATION 6 MENU INFORMATION 1. Search 1.1 Auto Search
SIRKOM Media Player User Guide SRK series (SRK-005/SRK-005-H/SRK-005-K) Digital Signage Specialist SIRKOM EUROPE, S.L. Avda. Lehendakari Aguirre, 50-52 48014 Bilbao SPAIN T. +34 944 765 344-1- Kindly Reminder
Micca Speck G2 User s Manual Got a Question or Need Help? Email our technical support team at: firstname.lastname@example.org for personalized assistance with the setup and use of this product. Please visit our
User s Manual USB 2.0 TV-BOX Table of Contents Safety Instructions. 1 Introduction. 1 Features. 1 System Requirements. 2 Package Contents. 2 Products of TV Box. 3 Specification. 4 Hardware Installation
Control Box Table of contents Page Introduction... Installation...5 Mounting the box System cable External power supply Location of switches and connectors Internal switch settings...8 Possible configurations...9
TSS-4 Digital SD Recorder User Manual Before installing and using, be sure to read this Manual for best performance. ATTENTION This product is to be used within the vehicle interior. In order to prevent
Hybrid DVR Quick Start Guide Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to most Hybrid DVR models. DVR
/ QUICK START GUIDE Mobile Projector 1 STEP 1 - POWER UP Power Button Press and hold the power buttons for 5 seconds to turn on the device. (It may take a few seconds for the Cube to start projecting an
Cisco Digital Media Suite: Cisco Digital Media Encoder 2200 The Cisco Digital Media Suite (DMS) is a comprehensive offering of webcasting and video sharing, digital signage and business IPTV applications
User Manual V97 HD Table of Contents Safety instructions ------------------------------------------------------------------ 3 Device overview --------------------------------------------------------------------
HD View 12 Plus and HD View 6 Component Video & Audio Distribution Amplifier OPERATING INSTRUCTIONS TM TM Using the HD View 12 Plus and HD View 6. Component Video & Audio Distribution Amplifier. Page 2
DH5-Series DVR Server and NVR-Series Video Storage Server Hardware Reference Manual Please read these instructions before installation and keep for later reference. NOTES: 1. Do not use in extreme heat
User Manual COMMAX LOBBY PHONE DRC-703S Thank you for purchasing COMMAX products. Please carefully read this User s Guide (in particular, precautions for safety) before using a product and follow instructions
22 Wall Mounted Android Advertising Display Overview Plug and Play Plug and Play is the easiest and most simple way to upload content to the screen. Simply load images and videos on a USB stick, insert
Features The AVG-HD402PR uses HDBaseT technology to deliver HDMI signal with a maximum transmission distance up to 60 meters with CAT5e/CAT6 cable. Supports Full HD: Delivers resolutions including 800x600@60Hz,
NVR User Manual NVR User Manual For further help, please visit www.zmodo.com Introduction This product series is a 4 channel embedded NVR with pentaplex functionality: the product will perform video audio
HD Media Player User Manual MPC1080P-1/MPC1080P-10 Content 2 2 2 2 4 6 7 7 8 8 9 9 10 10 10 10 11 I. Main Features I.I. Applications I.II. Display format I.III. Supported Languages II. Remote Control III.
Model BS-150 Video Inspection Camera Instruction Manual reedinstruments www com Table of Contents Safety... 2 Features... 3 Specifications...3-4 Instrument Description... 5 Operating Instructions...6-8
Operation Manual Defender Car vision 5018FullHD Car DVR 1 Thank you for buying Defender Car Vision 5018FullHD car DVR. Before using the device, read attentively this manual and keep it for the whole period
SENTA Warnings and Precautions READ BEFORE OPERATING EQUIPMENT SAVE THESE INSTRUCTIONS To prevent damage to your radio or possible injury to you or others, read these safety precautions and instructions
960P and 1080P HD Video Security DVR System User Manual www.tigersecu.com Copyright 2017 TIGERSECU, Inc Contents Contents... 1 Important Information...3 Installation Guide....4 Chapter 1. Start-up Wizard...6
SVAT ELECTRONICS now you can see SVAT ELECTRONICS now you can see COVERT DVR Covert DVR w/ Integrated Color Camera w/ Integrated Color Camera COMPLETE SYSTEM INSTRUCTION MANUAL Instruction Manual MODEL##
Cisco D9054 HDTV Advanced Compression Encoder Product Overview The MPEG-4 part 10 (H.264/AVC) D9054 Encoder is the right choice for any operator who wants to compress high-definition video using MPEG-4
User's Guide Video Borescope Model BR200 Introduction Congratulations on your purchase of this Extech BR200 Video Borescope. This instrument was designed for use as a remote inspection device. It can be
HELLO KITTY 1GB DIGITAL AUDIO PLAYER OWNER S MANUAL KT2045 PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE SAFETY INFORMATION Equipment
BRIGHTAUTHOR USER GUIDE Software Version 3.5 BrightSign, LLC. 16795 Lark Ave., Suite 200 Los Gatos, CA 95032 408-852-9263 www.brightsign.biz TABLE OF CONTENTS Chapter 1 Getting Started... 1 What is BrightAuthor?...
USER MANUAL KADPF10XXXA Safety Information Keep away from water, moisture and dusty areas. Working temperature of 0-40 C. Never store in a very hot or very cold place. Be careful not to drop or knock the
User Manual Congratulations for buying MonsterPad! Thank you very much for your trust and your decision to buy an EASYPIX product! As we constantly update and improve MonsterPad there may be small differences
USER MANUAL High Definition HDD Multimedia Player BM 3030 Feature Installation Guide Management Guide CONTENTS 1. Before You Get Started...... 3 1.1 SAFTY INSTRUCTION.....3 1.2 TAKE A LOOK TO THE MEDIA
INSTRUCTION MANUAL 2.4G Wireless DVR SB-WDVR50 Revised: April 26, 2013 Thank you for purchasing from SafetyBasement.com! We appreciate your business. We made this simple manual to help you enjoy your new
USER MANUAL DV-HAS HDMI Audio Separator 244 Bergen Boulevard, Woodland Park, NJ 07424 Tel 973-785-4347 FAX 973-785-3318 Web: www.fsrinc.com LIT1460 Proprietary Information All information in this manual