Functions Output Overload Warning Weight Dimensions Included
|
|
|
- Byron Osborne
- 6 years ago
- Views:
Transcription
1 DS2 set Digital Force s DS2 Popular Accuracy Display Display Update Sampling Rate Battery Usage Overload Capacity Measuring Units Power Supply Temperature Range Humidity Range Functions Output Overload Warning Weight Dimensions Included ±0.2% F.S. ±1digit 4-digit LCD 10 times/sec 1000 times/sec or more 10 hours (Approx. 10 hours for charging) Approx. 200% F.S. kgf/n/lbf or gf/n/ozf selectable Internal NiMH rechargeable batteries or AC adapter 0~+40 C 20~80%RH Peak holding Comparator Display reversing Damping (2-step) Digital (RS232C) Analog voltage Approx. ±1V F.S. Mitutoyo Digimatic Approx. 110% F.S. (LCD blinks) Approx. 420g W66xD33xH189mm 6 attachments (Small Hook, Flat Tip, Conical Tip, Chisel Tip, Notched Tip, Extension Shaft) AC adapter Carrying case Instruction manual Inspection certif icate Capacity Indication Resolution Measuring Shaft DS2-2N DS2-5N DS2-20N DS2-50N DS2-200N DS2-500N DS2-1000N 2N(200gf) 5N(500gf) 20N(2kgf) 50N(5kgf) 200N(20kgf) 500N(50kgf) 1000N(100kgf) 2.000N(200.0gf) 5.000N(500.0gf) 20.00N(2.000kgf) 50.00N(5.000kgf) 200.0N(20.00kgf) 500.0N(50.00kgf) 1000N(100.0kgf) 315
2 316 Digital Force s ZP/Z2 Standard ZP/Z2 set ZPS/Z2S set Accuracy Display Display Update Sampling Rate Battery Usage Overload Capacity Measuring Units Power Supply Temperature and Humidity Range Functions Output Digital Force s Overload Warning External Connecting Switch ZPS/Z2S Separate Sensor ZP/ZPS/ZPH (USB model) Z2/Z2S/Z2H (NON-USB model) ±0.2% F.S. ±1digit 4-digit LCD 10 times/sec 1000 times/sec or more 8 hours (Approx. 10 hours for charging) Approx. 200% F.S. kgf/(k)n /lbf or gf/n/ozf selectable Internal NiMH rechargeable battery, AC adapter Temperature: 0~+40, Humidity range: 20~80%RH Peak hold, Memory (1000 data), Comparator, Display reverse, Auto zero clear, Alarm, Auto power off, Damping RS232C, Analog voltage ±2V F.S. Comparator ± NG or OK, Overload USB Mitutoyo digimatic Approx. 110% F.S. (LED flash, alarm) HOLD, ZERO, PEAK Capacity Display Resolution Measuring Shaft ZP(Z2)-2N ZP(Z2)-5N ZP(Z2)-20N ZP(Z2)-50N ZP(Z2)-100N ZP(Z2)-200N ZP(Z2)-500N ZP(Z2)-1000N 2N(200gf) 5N(500gf) 20N(2kgf) 50N(5kgf) 100N(10kgf) 200N(20kgf) 500N(50kgf) 1000N(100kgf) 2.000N(200.0gf) 5.000N(500.0gf) 20.00N(2.000kgf) 50.00N(5.000kgf) 100.0N(10.00kgf) 200.0N(20.00kgf) 500.0N(50.00kgf) 1000N(100.0kgf) Capacity Display Resolution Measuring Shaft ZPS(Z2S)-DPU-2N ZPS(Z2S)-DPU-5N ZPS(Z2S)-DPU-20N ZPS(Z2S)-DPU-50N ZPS(Z2S)-DPU-100N ZPS(Z2S)-DPU-200N ZPS(Z2S)-DPU-500N ZPS(Z2S)-DPU-1000N ZPS(Z2S)-DPU-2000N ZPS(Z2S)-DPU-5000N ZPS(Z2S)-DPU-10KN ZPS(Z2S)-DPU-20KN 2N(200gf) 5N(500gf) 20N(2kgf) 50N(5kgf) 100N(10kgf) 200N(20kgf) 500N(50kgf) 1000N(100kgf) 2000N(200kgf) 5000N(500kgf) 10kN(1000kgf) 20kN(2000kgf) 2.000N(200.0gf) 5.000N(500.0gf) 20.00N(2.000kgf) 50.00N(5.000kgf) 100.0N(10.00kgf) 200.0N(20.00kgf) 500.0N(50.00kgf) 1000N(100.0kgf) 2000N(200.0kgf) 5000N(500.0kgf) 10.00kN(1000kgf) 20.00kN(2000kgf) 0.01kN(1kgf) 0.01kN(1kgf) M10 M10 M10 female screw female screw No attachment is included with ZPS/Z2S-DPU-10kN or higher. Those models do not have measuring shaft but there is a female screw in place of a measuring shaft. Other type of load cells are available as option. When you connect a load cell to an amplif ier, the amplif ier must be adjusted according to the load cell. Tel
3 Mechanical Force s ( ) FB/FS Popular FB-10N FB-20N FB-30N FB-50N FB-100N FB-200N FB-300N FB-500N 10N 20N 30N 50N 100N 200N 300N 500N 0.1N 0.2N 0.25N 0.5N 1N 2N 2.5N 5N Mechanical Force s ( ) PS/PSS Standard PS-5N PS-10N PS-20N PS-30N PS-50N PS-100N PS-200N PS-300N PS-500N 5N 10N 20N 30N 50N 100N 200N 300N 500N 0.05N 0.1N 0.2N 0.25N 0.5N 1N 2N 2.5N 5N FB/FS set PS/PSS set FS-1K FS-2K FS-3K FB-5K FB-10K FB-20K FB-30K FB-50K 1kgf 2kgf 3kgf 5kgf 10kgf 20kgf 30kgf 50kgf 10gf 20gf 25gf 50gf 100gf 200gf 250gf 500gf PSS-0.5K PSS-1K PSS-2K PSS-3K PS-5K PS-10K PS-20K PS-30K PS-50K Accuracy: ±0.3% F.S. Stroke: 10mm Graduation: 100 lines (120 lines for 30N, 300N, 3K, 30K, 30lb) Measurement mode: Track and peak mode (selectable) Peak hold function Measuring shaft: Use temperature: 0~+40 C Weight: Approx. 600g Dimension: W67xD48xH232.5mm Included: 6 attachments (Small Hook, Flat Tip, Conical Tip, Chisel Tip, Notched Tip, Extension Shaft), Carrying case, Instruction manual, Inspection certif icate Accuracy: ±0.1% F.S. Weight: Approx. 600g Stroke: 10mm Dimension: W67xD48xH232.5mm Graduation: 100 lines Included: 8 attachments (Small Hook, (120 lines for 30N, 300N, Flat Tip, Conical Tip, Chisel Tip, Notched Tip, 3K, 30K, 30lb) Extension Shaft, Large Hook, Y Hook), Measurement mode: Carrying case, Instruction manual, Track and peak mode Inspection certif icate (selectable) Peak hold function Measuring shaft: Use temperature: 0~+40 C 500gf 1kgf 2kgf 3kgf 5kgf 10kgf 20kgf 30kgf 50kgf 5gf 10gf 20gf 25gf 50gf 100gf 200gf 250gf 500gf FB-5lb FB-10lb FB-20lb FB-30lb FB-50lb FB-100lb 5lbf 10lbf 20lbf 30lbf 50lbf 100lbf 0.05lbf 0.1lbf 0.2lbf 0.25lbf 0.5lbf 1lbf PS-5lb PS-10lb PS-20lb PS-30lb PS-50lb PS-100lb 5lbf 10lbf 20lbf 30lbf 50lbf 100lbf 0.05lbf 0.1lbf 0.2lbf 0.25lbf 0.5lbf 1lbf 317
4 Mechanical Force s ( ) PSM Precision PSM set Accuracy: ±0.1% F.S. Stroke: 10mm Graduation: 200 lines (150 lines for 30N, 300N, 3K, 30K) Measurement mode: Track and peak mode (selectable) Peak hold function Measuring shaft: Use temperature: 0~+40 C Weight: Approx. 600g Dimension: W67xD48xH232.5mm Included: 8 attachments (Small Hook, Flat Tip, Conical Tip, Chisel Tip, Notched Tip, Extension Shalt, Large Hook, Y Hook), Carrying case, Instruction manual, Inspection certificate Lever Operation SVL-1000N/ Handle Operation SVH-1000N Up to 1000N measurement Stroke control by mechanical stopper Various options are available Easy carry with light weight Capacity Force Direction Travel Method Travel per 1 Turn Stroke Function Weight Dimension Fixable Force PSM-2K PSM-3K PSM-5K PSM-10K PSM-20K PSM-30K PSM-50K 2kgf 3kgf 5kgf 10kgf 20kgf 30kgf 50kgf 10gf 20gf 25gf 50gf 100gf 200gf 250gf SVL-1000N SVH-1000N 1000N Tension and Compression Lever Handle 60mm per 170 degree 3mm 60mm Mechanical Stopper Approx. 7.3kg Approx. 7.7kg See Next Pages Digital Force : DS2, Z2, ZP Series Mechanical Force : FB, PS, PSM Series 318 Tel
5 MX-500N Motorized Test Stands MX-500N (Automatic/ Manual operation) MV-500NII (Manual operation) Standard model covers low-load up to 500N. This stand covers from quality control to material testing as tension-compression tester. High functional MX series and basic MV series are available. MX-500N function Single/ continuous cycle function Fix speed/ adjustable speed mode select Overload brake (work with Z series) Force control mode (work with Z series) Capacity: 500N(50kgf) Stroke: 288mm Speed : 10~300mm/min non-step adjustable Power supply: AC100~240V Safety feature: Upper/ lower limit, Emergency button Weight: Approx. 18kg Dimension: W214xD428xH574mm Optional function Speed/ length meter (-E) Timer unit (-TM) Digimatic length meter (-S) Extended stroke (-L550) Another speed range MX-500N MV-500NII MX-1000N Motorized Test Stands MX-1000N (Automatic/ Manual operation) MV-1000N (Manual operation) MX-1000N MV-1000N Standard model covers low-ioad up to 1000N. This stand covers from quality control to material testing as tension-compression tester. High functional MX series and basic MV series are available. MX-1000N function Single/ continuous cycle function Fix speed/ adjustable speed mode select Overload brake (work with Z series) Force control mode (work with Z series) Capacity: 1000N(100kgf) Stroke : 400mm Speed : 8~240mm/min non-step adjustable Power: AC100~240V Safety feature: Upper/ lower, Iimit, Emergency button Weight: Approx. 24kg Dimension: W263xD368xH903mm Optional function Speed/ length meter (-E) Timer unit (-TM) Digimatic length meter (-S) Extended stroke (-L650) Another speed range 319
6 Standard Attachments / Optional Attachments Standard Attachments Standard Capacity A-1/S-1/SR-1 Small Hook A-1 Weight: Approx. 3.1g S-1 Weight: Approx. 13g SR-1 Weight:Approx. 19g A-6/S-6 Extension Shaft A-6 Weight: Approx. 6.7g S-6 Weight: Approx. 27g Steel S-series are included in models up to 1000N/100kgf. Aluminum A-series are included in models under 100N/10kgf. DS2 and FB don t include large hook and Y hook. The model with capacity 1000N/100kgf includes small hook SR-1 instead of S-1. Screw: A-2/S-2 Flat Tip A-2 Weight: Approx. 2.7g S-2 Weight: Approx. 13g A-4/S-4 Chisel Tip A-4 Weight: Approx. 1.8g S-4 Weight: Approx. 11g A-7/S-7 Large Hook A-7 Weight: Approx. 6.8g S-7 Weight: Approx. 44g Accessories of force gauges. A-3/S-3 Conical Tip A-3 Weight: Approx. 1.7g S-3 Weight: Approx. 10g A-5/S-5 Notched Tip A-5 Weight: Approx. 2.0g S-5 Weight: Approx. 11g A-8/S-8 Y Hook A-8 Weight: Approx. 8.6g S-8 Weight: Approx. 58g Optional Handle DOH-1, MOH-1 (For hand held use) DOH-1 MOH-1 Digital force gauge Mechanical force gauge Usable ZP/Z2, DS2 PS/PSS, PSM, FB/FS Weight Approx. 740g Approx. 805g Force Attachment High Capacity B-1 Small Hook Included ZPH(Z2H), ZPS(Z2S)-DPU and PSH series (For capacity 1000N/100kgf to 5000N/500kgf). Not included with handles and installation bolts for ZPS(Z2S) series. Screw: M10 Weight: Approx. 59g B-6 Extension Shaft Weight: Approx. 102g B-2 Flat Tip Weight: Approx. 29g B-4 Chisel Tip Weight: Approx. 38g B-7 Handles Weight: Approx. 250g (1 piece) B-3 Conical Tip Weight: Approx. 33g B-5 Notched Tip Weight: Approx. 37g B-8 Installation Bolts Weight: Approx. 16g DOH-1 Fine Point Chuck / FP-50,51 Flat Chucks GC-1100 / GC-1200 / GC-5000 Hook for corrugated cardboard seal strength / DF-60 Optional Handle / FOH-1 Pin Grip / CP-150N Small Grips / SC-3, SC-8 Wedge grip/kc 100, Tel
Separate sensor model
Digital Force Gauge IMADA CO.,LTD 1/9 ------------------------------------------------------------------------------------------------------------------------------------------------ Z Series : ZPS for
IMADA CO.,LTD. Digital force gauge ZT series separate model High functionality/high performance Digital Force Gauge ZT Series Separate Sensor Model
High functionality/high performance Digital Force Gauge ZT Series Separate Sensor Model Separate sensor model of high performance digital force gauge ZT series. Wide range of load cell designed to meet
IMADA CO.,LTD. Digital force gauge ZT series separate model High functionality/high performance Digital Force Gauge ZT Series Separate Sensor Model
High functionality/high performance Digital Force Gauge ZT Series Separate Sensor Model Separate sensor model of high performance digital force gauge ZT series. Wide range of load cell designed to meet
Hand held use More precise force measurement Force-displacement measurement
High functioning/high performance Digital Force Gauge ZT Series High sampling rate: Captures force value more precisely. Multifunction and easy set up with languages. New I/O function: Continuous data
Digital force gauge DSV/DST series
Digital force gauge DSV/DST series Ideal for hand-held use due to the hand fitting design and the lightweight Easy data management and OK judgement In capacity up to 1000N, handling a wide range of force
Standard Model Digital Force Gauge ZTS series
Standard Model Digital Force Gauge ZTS series Feature 1 Clear display / Easy setting. Feature 2 You can capture peak value precisely due to high sampling. Feature 3 Easy data management on PC with included
Standard Model Digital Force Gauge ZTS series
Standard Model Digital Force Gauge ZTS series Feature 1 Clear display / Easy setting. Feature 2 You can capture peak value precisely due to high sampling. Feature 3 Easy data management on PC with included
FG-7000 Digital Force Gauge Operation Manual
FG-7000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
-Direct.com FG-3000 Digital Force Gauge Operation Manual
FG-3000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
High Functionality Model Digital Force Gauge ZTA series
High Functionality Model Digital Force Gauge ZTA series Feature 1 Displacement I/O becomes possible, combined with a linear scale. *1 Feature 2 Continuous data can be saved in USB flash drive, and you
FG-3000 Digital Force Gauge Operation Manual
FG-3000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
DFS II Series. DFS II / DFS II-R / DFS II-R-ND Digital Force Gauge
DFS II Series DFS II / DFS II-R / DFS II-R-ND Digital Force Gauge Functions and Features Easy-to-Read Display A large, easy-to-read full color LCD can display readings, icons and visually indicate gauge
FG-7000L Digital Force Gauge Operation Manual
FG-7000L Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
IMADA CO.,LTD. Force-Displacement Measurement Unit FSA Force-Displacement Measurement Unit FSA. Simple operation Easy setting. Easy.
Measuring unit to draw force-displacement curve easily. Ideal for feeling testing or material characteristic evaluation since force-displacement relation is clearly visible. -Displacement curve Easy Precise
Digital Force Gauge INSTRUCTION MANUAL. Model: DS2
2 YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years
Premium Digital Force Gauges
32-1041 REV 0 Premium Digital Force Gauges Data outputs RS-232, Mitutoyo (Digimatic), and analog outputs. Automatic timed output (RS-232) included. Set points Programmable high and low force set points
Force-Displacement Measurement Unit IMADA Co., LTD. 1/5
-Displacement Measurement Unit IMADA Co., LTD. 1/5 Series F-S Master Compact/ Economy/ Simple operation, Easy to draw force-displacement graph Better access to high quality brightens the field of quality
SHIMPO INSTRUMENTS. FG-7000T Digital Torque Gauge Operation Manual
FG-7000T Digital Torque Gauge Operation Manual SHIMPO INSTRUMENTS Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the
FG-3000R Digital Force Gauge Operation Manual
FG-3000R Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
Universal Force / Torque Gauge
The innovative BGI Universal Force / Torque Gauge is the ultimate in force and torque measurement flexibility. With all the features of the Series BG, coupled with compatibility with a wide selection of
NIDEC-SHIMPO INSTRUMENTS
Series FGE-XY Force Gauges Operation Manual NIDEC-SHIMPO INSTRUMENTS Do not operate or store instrument in the following locations: Explosive areas, near water, oil, dust or chemicals; areas where the
Series FGE-XY Force Gauges Operation Manual
Series FGE-XY Force Gauges Operation Manual Do not operate or store instrument in the following locations: Explosive areas, near water, oil, dust or chemicals; areas where the temperatures can exceed 104
2-2 Testing space Tension and Compression test can be available at the lower section of movable crosshead. Upper tension type : Sold separately.
1.General Specifications TECHNO GRAPH This TECHNO GRAPH, universal testing machine has developed with the concept of achieving Fulfillment of functions and simple operations. Adopted with AC servo motor,
NIDEC-SHIMPO INSTRUMENTS
Series FGE-HXY Force Gauges Operation Manual NIDEC-SHIMPO INSTRUMENTS Do not operate or store instrument in the following locations: Explosive areas, near water, oil, dust or chemicals; areas where the
ISF-1DF SERIES DIGITAL FORCE GAGE OPERATION MANUAL
ISF-1DF SERIES-E www.insize.com ISF-1DF SERIES DIGITAL FORCE GAGE OPERATION MANUAL V0 Attention Description Regardless of whether the unit is ON or OFF, Don t exceed the capacity of the gauge. At 110%
Force-Displacement Measurement Unit IMADA Co., LTD. 1/5
-Displacement Measurement Unit IMADA Co., LTD. 1/5 Series F-S Master Compact/ Economy/ Simple operation, Easy to draw force-displacement graph Better access to high quality brightens the field of quality
NOTES TABLE OF CONTENTS
NOTES TABLE OF CONTENTS 1.0 Introduction.................................................... 04 1.1 Standard Features 1.2 Accessories Included 2.0 Overview.....................................................
Torque-Angle Measurement Unit TAA series
-Measurement unit to analyze (Rotating/Twisting force) and easily. -Easy but Accurate - measurements are possible. -Drawing and Analyzing graphs on PC with simple operations. -Selectable products for your
High speed peel tester IPTS-20N/50N
IPTS-20N/50N It graphs the measurement accurately due to its high sampling rate, at Max. 2000Hz. It handles a wide range of test speed up to 1500 mm/min. One-click operation: The start button provides
TTC Series Torque Tool Tester Operation Manual
TTC Series Torque Tool Tester Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
User s Guide. Series 2 DIGITAL FORCE GAUGES
Series 2 DIGITAL FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series 2 digital force gauge, designed for tension and compression force testing applications from 2 to 500 lbf (10 to 2,500 N)
Data saving in PC or in ACT-1000N
- The start button provides smooth flow from Testing to Data saving including OK/NG judgment. - Save the test conditions up to 26 patterns. The suitable setting is able to be recalled instantly. - 2 test
- Small and light weight load cells. They are suitable for a narrow space. - It can be screwed with the both ends. Easy installation and fixation.
- Small and light weight load cells. They are suitable for a narrow space. - It can be screwed with the both ends. Easy installation and fixation. *They need to be combined with indicators to perform measurement.
LOAD TEST STAND 1/ Movable crosshead speed Between chucks :0 mm to 310 mm (PCH-500N-012 is installed.)
1.General Specifications LTS-200N/LTS-500N Spec.No. ENLTS4149-A LOAD TEST STAND 1/6 Load Test Stand, LTS is a desk type testing machine featuring light weight and compact size, and you can make tests easily.
DFS Series User s Manual (5N-1000N Capacity)
DFS Series User s Manual (5N-1000N Capacity) REV 3.8 Table of Contents Table of Contents 2 Introduction 3 Before Use 3 Operation Overview 4 Powering the DFS 5 Using the DFS. 6 Fitting Accessories 6 Mounting
DFS II / DFS II-R / DFS II-R-ND Series
Digital Force Gauge DFS II / DFS II-R / DFS II-R-ND Series» Operating Modes - Normal - Peak» Advanced Functions - Load Limits - Pass/Fail Limits - Load Averaging - Load Comparison - Break Detection - Contact
The advanced system of the MS 451PV also allows quality teams to program required stop and test
ABOUT The advanced system of the MS 451PV also allows quality teams to program required stop and test functions into the machine. This function will automatically stop production, prompting the operator
AUTOMATIC TENSION & COMPRESSION TESTING MACHINE
Product Code UTM-3000 Automatic 500 kn Tension and 1000 kn Compression Testing Machine Standards GENERAL PROPERTIES UTM-3000 automatic 500 kn tension and 1000 kn compression testing machine has been designed
User s Guide. Series 3 DIGITAL FORCE GAUGES
Series 3 DIGITAL FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series 3 digital force gauge, designed for tension and compression force testing applications from 0.12 lbf to 500 lbf (0.5 N
Force and Torque Measurement Products
Force and Torque Measurement Products Engineered better Catalog 19 1 Force and torque measurement... Since 1979, Mark-10 has been an innovative designer and manufacturer of force and torque measuring instruments.
FGV-HXY Digital Force Gauge Operation Manual
FGV-HXY Digital Force Gauge Operation Manual Do not operate or store instrument in the following locations: Explosive areas, near water, oil, dust or chemicals; areas where the temperatures can exceed
NIDEC-SHIMPO INSTRUMENTS
TTR Torque Tool Tester Operation Manual NIDEC-SHIMPO INSTRUMENTS 1) Overloading the transducer does not only damage the transducer but may break the transducer head and could result in injury! 2) Torque
SMART FORCE AND TORQUE SENSORS. User s Guide
SMART FORCE AND TORQUE SENSORS Thank you Thank you for purchasing a Mark-10 Plug & Test TM remote sensor, designed for use with a Mark-10 model 5i or 3i force/torque indicator. With proper usage, we are
MPT-250C Wire Crimp Pull Tester
MPT-250C Wire Crimp Pull Tester The MPT-250C is a Motorized Tensile Wire Crimp Pull Tester used to test a crimp contact s or terminal s tensile strength. The unit has a range of 2.5 lbf to 250 lbf and
Digital Measurement Metrology, Inc PRECISION IS OUR VISION
Contents Powering the Gage 2 Using the Gage 3 Optional Settings 8 Dimensions 10 BFG Specification Table 11 Introduction Thank you for choosing the Mecmesin Corporation Basic Force Gage (BFG) instrument.
User s Manual. Models Digital Force Gauge. Additional User Manual Translations available at
User s Manual Models 475055 Digital Force Gauge Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of Extech s Model 475055 Digital Force Gauge
Series 4. User s Guide DIGITAL FORCE GAUGES. Mobile: Fax:
Series 4 DIGITAL FORCE GAUGES Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia Phone: 021-8690 6777 (Hunting)
Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50. page 1
Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50 page 1 Standard Machines for tension and compression made of massive Aluminum and stainless steel ball bearings and ball screws bellows to
TNP Digital Torque Meter Operation Manual
TNP Digital Torque Meter Operation Manual Do not attempt to repair or alter this instrument. Warranty will be voided and damage to the unit may result. Use and store within the stated temperature and humidity
SMART FORCE AND TORQUE SENSORS. User s Guide
SMART FORCE AND TORQUE SENSORS Thank you Thank you for purchasing a Mark-10 Plug & Test TM remote sensor, designed for use with Mark-10 models 7i, 5i and 3i force/torque indicators. With proper usage,
Module Adhesion, Embossed Character & Peel Tester
WWW.Q-CARD.COM Module Adhesion, Embossed Character & Peel Tester Perform Four Tests with One Test Stand Q-Card s motorized test stand with integrated digital force gauge allows for flexible, highly reliable
DF II Series Digital Force Gauges for DFS II, DFS II-R, DFS II-R-ND and DFE II Models. User Manual. DF II Series User Manual 1
Part No. NC003194 July 2013 DF II Series Digital Force Gauges for DFS II, DFS II-R, DFS II-R-ND and DFE II Models User Manual DF II Series User Manual 1 WARRANTY This instrument is warranted against defects
Single column testing machine STENTOR II
Force and Torque Measurement solutions Single column testing machine STENTOR II STENTOR II material tester Design and innovations that simplify your tests The test stand Stentor II is a complete force
DFE Series Digital Force Gauge
DFE Series Digital Force Gauge The CHATILLON DFE Series marks a new era in digital force measurement. This compact, easy-to-use force gauge is designed for economy applications without compromising functionality.
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
Digital Force Gauge INSTRUCTION MANUAL Lb Lb Lb. Z Series USB Models: ZP, ZPH and ZPS
2 YEAR WARRANTY (RESTRICTIS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years
Instruction Manual FH EXT
Set Thank you for buying a SAUTER force gauge. We hope you are pleased with your high quality force gauge with its big functional range. If you have any queries, wishes or helpful suggestions, do not hesitate
Digital Torque Screwdriver
2 YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years
DFX II / DFE II / DFS II / DFS II-R / DFS II-R-ND
Chatillon Digital Force Gauge Series II Release DFX II / DFE II / DFS II / DFS II-R / DFS II-R-ND 1 Overview DF II Series features/benefits New model features/benefits Comparison to current models Selling
i-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
!!! Constantly used-machines on camps!!! Visit our Homepage under: in our saved Onlineshop under used-machines
Motorized Test Station Model ATM Motor drive with adjustable test speed MADE IN GERMANY ATM 100 with SG 80 and DKS-20/A ATM 50 Basic version without tools ATM 50 with SG 80 and MK-8/A Page 1 of 6 Motorische
Instruction Manual FH EXT
Sensor Outside Our FH series models are divided into four categories, see table below: Thank you for buying a SAUTER force gauge. We hope you are pleased with your high quality force gauge with its big
Thickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
Digital Torque Gauge. User s Manual
Digital Torque Gauge User s Manual Content 1. Introduction 1.1 Overview 1 1.2 Indicator 2 1.3 Torque Sensor 3 1.4 Specifications 4 2. Operation 2.1 Test Preparation 5 2.2 Power on/off 5 2.3Testing 5 2.3.1
Bore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE PRE1424 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424 High-Performance Height Gage QM-Height Series Very high accuracy ±(2.4+2.1L/600) μm Built-in air levitation
Series E ERGONOMICS FORCE GAUGES. User s Guide
Series E ERGONOMICS FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series E ergonomics force gauge, designed for tension and compression testing applications with a range of interchangeable
DIGIMATIC INDICATOR ID-H
Small Tool Instruments and Data Management Optical Remote Control Compatible, High-Accuracy Digital Indicator DIGIMATIC INDICATOR ID-H Catalog No. E4281-543 World-Class Digital Indicator Delivers Higher
IPTS-20N/50N. IMADA CO.,LTD 180-degree High Speed Peeling Tester
IPTS-20N/50N High sampling rate of 2000Hz ensures accurate graphing Handles a wide range of test speed up to 1500 mm/min One-click user-friendly operation Handles thick sample up to 0.5mm Test Image IPTS-50N
Programmable Switching DC Power Supply
SS-C series (300W~900W,, with RS-232 interface) Introduction SS-C series are high accuracy programmable DC power supply with single output. MPU control, RS-232/RS- 485/USB interface for PC control, the
TORQUE WRENCH OPERATION MANUAL. Model : TQ Kgf-cm, heavy duty, professional
1000 Kgf-cm, heavy duty, professional TORQUE WRENCH Model : TQ-8803 Your purchase of this 1000 Kgf-cm Torque Wrench marks a step forward for you into the field of precision measurement. Although this METER
Digital Torque Tester
YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years
R5050. Model. Instruction Manual. TRMS AC/DC Clamp Meter. reedinstruments. www. com
Model R5050 TRMS AC/DC Clamp Meter Instruction Manual reedinstruments com Table of Contents Safety... 3 Features... 4 Specifications...4-6 Instrument Description...7-8 Measurement Procedures...9-12 Battery
Digital Torque Wrenches
2 YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years
Installation is easy for equipment or external devices.
Strain gauge type load cell for tension/compression test. This product can be built in equipment like on manufacture line. For standard force Capacity: 2~500N For large force Capacity: 1000~20kN Installation
ADT 681. Digital Pressure Gauge FEATURES: SPECIFICATIONS: OVERVIEW:
ADT 681 Digital Gauge OVERVIEW: With advanced microprocessor technology and state- of- the- art silicon pressure sensors, the ADT 681 series digital pressure gauges provide an accurate, reliable, and economic
Instruction Manual FH
Sensor Outside Thank you for buying a SAUTER force gauge. We hope you are pleased with your high quality force gauge with its big functional range. If you have any queries, wishes or helpful suggestions,
RS Stock No Instruction Manual RS Input Data Logging Thermometer
RS Stock No. 730-0458 Instruction Manual RS-1384 4 Input Data Logging Thermometer EN FR IT DE ES TABLE OF CONTENTS / EN TITLE TABLE OF CONTENTS PAGE 1. INTRODUCTION FEATURE... 1 2. SPECIFICATIONS... 2
Portable pressure calibrator Model CPH7600
Calibration technology Portable pressure calibrator Model CPH7600 WIKA data sheet CT 17.01 Wally Box III Applications Calibration service companies and service industry Measurement and control laboratories
AUTOMATIC CEMENT COMPRESSION & FLEXURAL MACHINES
AUTOMATIC COMPRESSION & FLEXURAL MACHINES Product Code UTCM-6331 250 kn Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz UTCM-6331/110 250 kn Automatic Cement Compression Testing Machine
Digital Torque Meter. ADT-C Series OPERATION MANUAL
ADT-C Series Digital Torque Meter ADT-C Series OPERATION MANUAL CO., LTD Digital Torque Meter It is the torque-measuring instrument of the electronic formula which can measure torque power. It corresponds
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE PRE1424(2) SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424(2) High-Performance Height Gauge QM-Height Series Best-in-class accuracy ±(2.4+2.1L/600)μm Built-in air
User s Guide. Series 7 DIGITAL FORCE GAUGES
Series 7 DIGITAL FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series 7 digital force gauge, designed for tension and compression testing applications from 0.12 lb to 1,000 lb (0.5 N to 5,000
Please refer to Page 3.
C. Insert the accessory CD into computer and open the following path: CD-ROM drive Chinese SH and ST port software SundooPor t SundooPor t. exe; This software need not be installed, and you only have to
DTW 400/DTW Digital Torque Tester/Screwdriver User s Guide
DTW 400/DTW 405 - Digital Torque Tester/Screwdriver User s Guide LIST OF EQUIPMENT 1. Digital Torque Tester/Screwdriver (DTW 400 with CW and CCW ratchet (1/4 female hex) 2. 2 Phillips tips (DTW 405 with
Application Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.
E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer
TPE 1464 Series Pressure Transducer
TPE 1464 Series Pressure Transducer Description The KMC TPE 1464 series of pressure transducers incorporate a gauge pressure transmitter featuring low hysteresis, excellent repeatability, and longterm
Technical Specifications
HMG 500 Series Hand Held Diagnostic Tool Applications Description The HMG 500 is a hand-held diagnostic tool for simple measuring tasks on hydraulic and pneumatic systems. Typical applications are in analysis,
INSTRUCTION MANUAL. DART Series Digital Force Gauges Models FGE-0.5X - 100X Models FGV-0.5X - 100X. Inspection/Standard Accessories
DART Series Digital Force Gauges Models FGE-0.5X - 100X Models FGV-0.5X - 100X INSTRUCTION MANUAL AL Congratulations on your purchase of a Shimpo FGE/V-X series digital force gauge. We trust you will enjoy
DIGITAL TORQUE METER MODEL TME2
DIGITAL TORQUE METER MODEL TME2 OPERATING INSTRUCTION TME2 TME2 Model To use this product properly and safely, please read this manual carefully before use. If you have any question about the product and
i-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
User s Guide. Series 5 DIGITAL FORCE GAUGES
Series 5 DIGITAL FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series 5 digital force gauge, designed for tension and compression force testing applications from 0.12 lb to 1,000 lb (0.5 N
Instruction Manual. Digital Force Gage. MODEL-SX series
Instruction Manual Digital Force Gage MODEL-SX series! Be sure to read through this instruction manual before using the product. This instruction manual is very important for using the product properly.
User s Guide. Series 5 DIGITAL FORCE GAUGES
Series 5 DIGITAL FORCE GAUGES Thank you Thank you for purchasing a Mark-10 Series 5 digital force gauge, designed for tension and compression testing applications from 0.12 to 2,000 lbf (0.5 N to 10,000
Fruit Hardness Tester
USER GUIDE Fruit Hardness Tester Model FHT200 Introduction Congratulations on your purchase of Extech s Fruit Hardness Tester Model FHT200. The tester is used to measure the hardness (ripeness) of fruits
Instruction Manual FH
Sensor Inside Thank you for buying a SAUTER force gauge. We hope you are pleased with your high quality force gauge with its big functional range. If you have any queries, wishes or helpful suggestions,
Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
INSTRUCTION MANUAL FOR TQ-8800 TORQUE METER PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
INSTRUCTION MANUAL FOR TQ-8800 TORQUE METER PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.VER.02-11.10 TABLE
Model 3i DIGITAL FORCE / TORQUE INDICATOR. User s Guide
Model 3i DIGITAL FORCE / TORQUE INDICATOR Thank you Thank you for purchasing a Mark-10 Model 3i digital force / torque indicator, designed for use with interchangeable remote force and torque sensors.
Digital Torque Tester/Wrench
YEAR WARRANTY (RESTRICTIONS APPLY) Imada, Inc. warrants its products to the original purchaser to be free from defects in workmanship and material under normal use and proper maintenance for two years