TPS SERIES TPS SERIES

Transcription

1 1A/1AM

2 1

3 11 Guarantee 1. INTRODUCTION FEATURES... 1

4 Introduction Features * 2-Way." Vented Active Speaker Cabinet * RMS-7Watts Program-1 Watts *."(1mm)woofer/1" Voice Coil * 1" Neodymium Tweeter * Trapezoidal painted wood cabinet. metal grille * xm Standard(2xVertical and Horizontal side) * Modern design & Lightweight Technical Specification Model Active System Type Power Handling Frequency Response Sensitivity(1mt) Low Frequency High Frequency Mixer Power Supply Enclosure Fixing Point Dimensions(H*W*D) Net Weight Volume 1AM 2-Way." Vented Active Speakr Cabinet RMS-7Watts Program-1Watts 7Hz-2KHz (-db) db/1db Max."(1mm)woofer/1" Voice Coil 1" Neodymium Tweeter 2-band equalizer on input channels Input channels with individual Volume control& 2 bands EQ bands Master EQ COMBO microphone Inputs with phantom power 2 RCA Line Inputs/.mm jack 2 RCA Line Outputs Monitor output with level control Powered output W(@ ohms, min) for optional external speakers 1-preset digital effect processor 2V - - Hz Trapezoidal painted wood cabinet.metal grille xm Standard(2xVertical and Horizontal side).2"(1mm) x 7.7"(2mm) x.7"( 22mm).7 lbs/.2kg 1.2CFT The following features are for 1AM mixer only: * -band equalizer on input channels * Input channels with individual Volume control and 2 bands EQ * bands Master EQ * COMBO microphone Inputs with phantom power(+v) * 2 RCA Line Inputs/.mm jack * 2 RCA Line Outputs * Monitor output with level control * Powered output W(@ ohms, min) for optional external speakers * 1-preset digital effect processor 17

5 Technical Specification 1A Active Speaker Cabinet 1- INDICATOR This LED lights up blue when the speaker is powered ON. 2- SWITCH 7 db INPUT INPUT LINE MIC CLIP SENSITIVITY MIC db LINE db LINK Max VOLUME SERIAL MADE IN CHINA 1A Continuous: RMS 7W - MAINS FUSE - CORD 1 ON 2 OFF 1-V TAL AC2V FUSE: 22-2V T2AL AC2V CONSUMPTION:1W 1-V~/Hz 22-2V~/Hz - MAIN VOLUME - /LINK 7- SIGNAL INPUT - SENSITIVITY SWITCH 1

6 - DIRECT AUXINPUT Direct AUX input, with RCA connector, the signal work without volume control at db of sensitivity. - LIMITER INDICATOR Wiring Connection DSP PRESETS DFX RET 1 VIBRAFLANGE 2 FUNKY ROCKABILLY BIGSTAGE 1 VIBRATO FLANGER CHORUS BASS 1AM MIDDLE MAIN LEVEL LEVEL LEVEL LEVEL CH 1 CH 2 CH CH 1 2 TAPE L IN R MAIN (MIN. LOAD ) PHANTOM OFF ON

7 Presets list 1AM Controllable Parameter NO. Preset Description Parameter Variable range Rev.decay time 1 WARM HALL Simulate a small acoustic space of the sound. ms Pre-delay ms 2 BRIGHT HALL Simulate a large acoustic space of the sound. WARM ROOM Simulate a small acoustic space of the sound. Rev.decay time 2ms Pre-delay ms BRIGHT ROOM Simulate a studio room with many early reflections Rev.decay time 2ms Pre-delay 2ms VOCAL1 Simulate a room with delay time. Rev.decay time ms VOCAL2 Simulate a room with small delay time. Rev.decay time 2ms Pre-delay 2ms 7 Rev.decay time VOCAL ms PLATE STEREO DELAY 1 Recreate the input sound on the stereo output Period 2ms with different time. STEREO DELAY 2 Recreate the input sound on the stereo output with Period 2ms different time. 2ms 11 Delay with room effect. Decay period REV + DELAY 1 Rev.decay time 2ms REV + DELAY 2 Delay with room effect. Delay with room effect. Decay period 7ms REV + DELAY Rev.decay time 2ms Decay period 277ms 1 REV + DELAY Delay with room effect. Rev.decay time ms Stereo chorus and large room reverb. Chorus rate REV + CHORUS1.7Hz Rev.decay time 2ms 1 Chorus rate REV + CHORUS2 Stereo chorus and large room reverb.2hz Rev.decay time ms Rev.decay time Simulate a small space with slight decay time. Decay period 2ms Pre-delay 211ms 11ms Pre-delay Simulate the transducers sound like classic bright Rev.decay time 2ms Rev.decay time 2ms 2ms vocal plate. Pre-delay ms CH 1 PHANTOM ON CH OFF R LEVEL TAPE L IN BASS MIDDLE 1

8 Block Diagram 7 11 MAIN (MIN. LOAD )

9 Frequency Response Diagram 1A +1 T T + d B S P L k 2k k k 2k Hz 1 2 d B AM T MAIN DSP PRESETS DFX RET 1 VIBRAFLANGE 2 FUNKY ROCKABILLY BIGSTAGE VIBRATO FLANGER CHORUS 1 S P L k 2k k k 2k Hz DSP SECTION Your 1AM features a 2-bit, 1-presets digital multi-effects including reverbs, chorus, vocal& delay, etc. Adjust this knob to select the desired effect. This control is used to adjust the level of the signal coming from internal multieffect.

10 VIBRAFLANGE 2 FUNKY ROCKABILLY BIGSTAGE VIBRATO FLANGER CHORUS 1 1 VIBRAFLANGE 2 FUNKY ROCKABILLY BIGSTAGE VIBRATO FLANGER CHORUS 1 OFF OFF ON ON Installation Description This switch is used to activate/deactivate the resident multi-effect. This LED lights up when the input signal is too strong. In case of the digital effect module being muted, this LED also lights up. MIC1 DSP PRESETS 1 DFX RET BASS 1AM MIDDLE MAIN LEVEL LEVEL LEVEL LEVEL TAPE L CH 1 CH 2 CH CH R 1 2 IN MAIN (MIN. LOAD ) PHANTOM Headphone REAR PANEL 21- ON/OFF This switch is used to turn the main power ON/OFF. 1AM ipod,cd Player. MP Laptop Computer Tape Recorder 22- AC INLET ON 1-V TAL AC2V 1-V~/Hz 22-2V T2AL AC2V 22-2V~/Hz OFF MADE IN CHINA FUSE AC INPUT CONSUMPTION: W Installation Description Connection Diagram MIC DSP PRESETS 1 DFX RET BASS 1AM MIDDLE MAIN 1 2 Powered Stage Monitor MAIN (MIN. LOAD ) LEVEL LEVEL LEVEL LEVEL TAPE L PHANTOM Passive Speakers IN R CH 1 CH 2 CH CH DAT Recorder Drum Machine