UL 98 Fusible Disconnect Switches
|
|
|
- Imogen Miller
- 6 years ago
- Views:
Transcription
1 UL 98 Fusible Mersen s fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC They are service entrance devices capable of fully rated load-break and load-make. While long-term safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the ON position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches Test position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles are available, as are all manner of accessories. Highlights: Multiple Configurations Power taps Adjustable shaft depth Fuse monitoring Interlocked fuse doors Configurations At the end of the switch fuse Mxxx03, 04, 30, or 40, S, N Applications: Main disconnects Short circuit protection Electrical isolation Overcurrent protection Safety switch Between the poles Mxxx12, 22, 22N, S Side operated types Mxxx03, 04, 30, or 40, S, N Ratings UL: Volts : 600VAC Amps : 30, 60, 100, 200, 400, 600, 800, and 1200A SCCR : Up to 200kA with Class CC, J, or L Fuses Ratings IEC: Volts : 690VAC Amps : 25, 50, 63, 125, 160, 200, 250, 400, 630, 800, and 1250A Catalog Number Designation Switch Ampacity 16 to 1200) Type M = Mersen AC Switch MD = Mersen DC Switch Blank = non-fused UL508 E = IEC non-fused U = non-fused UL98 CC = CC fused J = J fused D = DIN fused F = NFC fused B = BS-88 fused L = L Fused M 30 J 3 0 S Approvals: All UL Fusible Disconnect Switch switches meet UL & CSA requirements UL listed guide WHTY, File E for UL 98 (ratings from 30A to 1200A) IEC Number of Poles/Left side of Handle AC: 0, 1, 2, 3, 3N, 4, etc. (N = neutral) DC: 0, 1, 2,3,4 Number of Poles/Right side of Handle AC: Blank = < 200A non-fused, 0, 1, 2, 3, 3N, 4, etc. (N = neutral) DC: Blank = < 100A, 0, 1, 2, 3, 4 Revision Blank = 0 Special Configurations S = side-operated CH = Changeover DM = door-mounting N = Non-fused switched Neutral K20
2 Front and Side Operated M30CC12 30A, CC fused, 3-pole with pole on left side of handle and 2 poles on right side M60J30 60A, J fused, with 3 poles on left side of handle M200J30 with HDF A, J fused, 3 poles on left side of direct handle Switch Body Ampere Rating Base Part # M30 M60 M100 M200 Fuse Type CC, J J J J 3-pole Configuration 12, 30S 12, 30, 30S 30, 30S 30 S = Side operated (Direct Side Operated Handles are included with S option) Handles Switch Body Ampere Rating Direct Front Operation HDF30 HDF200 HDF200 HDF200 External Front Operation - Pistol Style NEMA 1, 3R, 12, IP65 HB45 HB65 HB65 HB65 NEMA 4, 4X HB45X HB65X HB65X HB65X B=Black. Substitute R for B if a red handle is desired. Ex. HR45 Shafts Shaft SPA SPA SPA SPA Lengths: 210, 290, 360, 430 Ex. SPA210 Shafts Terminal Lugs 6 per package Integral Integral LUG100 (#14-2/0) LUG200 (#6-300MCM) Terminal Shrouds 3-pole Integral Integral TSF TSF K Accessories OA3G01 OA1G10 OEA28 Auxiliary Contacts NO OA1G10, w/osz4 OA1G10 OA1G10 OA1G10 NC OA3G01, w/osz4 OA3G01 OA3G01 OA3G01 NO, between poles OA4B1C N/A N/A N/A Mounting plate OA1G10/OA3G01 OSZ4 Not needed Not needed Not needed Module for 8 aux. contacts OEA28 OEA28 OEA28 OEA28 Flange Operation Flange operation Mechanism FOM2 FOM3 (M60J12), FOM4 (M60J30) FOM4 FOM4 NEMA 4X Flange handle for cable operation FHC4X FHC4X FHC4X FHC4X NEMA 3R Flange handle for cable operation FHC12 FHC12 FHC12 FHC12 Flex cable flange oper 36 inch CABLE36 CABLE36 CABLE36 CABLE36 Flex cable flange oper 60 inch CABLE60 CABLE60 CABLE60 CABLE60 For the most current product performance data visit ep.mersen.com and use catalog search. K21
3 Front and Side Operated M400J30 400A, J fused, 3-pole with 3 poles on left side of handle M800L30S 800A, L fused, with 3 poles on left side of handle, side operated Switch Body Ampere Rating Base Part # M400 M600 M800 M1200 Fuse Type J J L L 3-pole Configuration Direct Front Operation HDF400 HDF800T HDF800T HDF1250T Handles External Front Operation - Pistol Style NEMA Type 1, 3R, 12, IP65 HB125 HB145 HB274 HB274 NEMA Type 4, 4X HB125X HB145X HB274X HB274X B = Black. Substitute R for B if red handle is desired. Ex. HR125 Shafts Shaft SFB SFB SFB SFB Lengths: 280, 325, 395mm Ex. SFB280 Shafts Terminal Lugs 6 per pkg LUG400 #2-600MCM LUG800 2 x #2 600MCM LUG800 2 x #2 600MCM LUG x 750MCM Accessories OA1G01 OA1G10 OEA28 Terminal Shrouds 3-pole TSF TSF TSF TSF pole TSF TSF TSF TSF Auxiliary Contacts Normally open OA1G10 OA1G10 OA1G10 OA1G10 Normally closed OA3G01 OA3G01 OA3G01 OA3G01 Module for 8 aux. contacts OEA28 OEA28 OEA28 OEA28 TSF K22
4 Technical Data Technical data according to UL/cULus General purpose amp rating pf= to 40 C A VAC Max. operating voltage VDC pf= Three phase 240 V HP/A 7.5/ / / / V HP/A 15/ / / /156.0 Max. horsepower rating / motor FLA current 600 V HP/A 20/ / / /144.0 Single phase 120 V HP/A 2/ V HP/A 3/17.0 ka Short circuit rating with fuse, 3 and 4-pole types UL/CSA fuse size A UL/CSA fuse type J/CC J J J Min. electrical endurance pf= operation cycles Mechanical endurance operation Terminal lug kits Integral Integral OZXA-24 OZXA-200 Wire range AWG #18-8 #14-4 #14-2/0 #4-300MCM Wire tightening lb.in 17 30/355) Torque Lug mounting lb.in N/A N/A Technical data according to IEC Rated insulation voltage Pollution degree 3 V Dielectric strength 50 Hz 1min. kv Rated impulse withstand voltage kv Rated thermal current in ambient 40 C / In open air A/W 32/3.5 63/ /12 200/17 max. fuse power dissipation 1) In enclosure 2) A/W 32/3.5 63/ /10, 135/12 200/15...with minimum cable cross section Cu mm Rated operational current, AC-23A Rated operational power, AC-233) Rated breaking capacity in category AC-23 The kw-ratings are accurate for three-phase 1500 R.P.M. standard asynchronous motors. up to 500 V A V A V kw V kw V kw V kw V kw up to 500 V A V A Rated short-time withstand current, 1 s r.m.s. -value ka Power loss / pole With rated current, without fuse W Weight without accessories 3-pole switch fuses kg pole switch fuses kg Built-in terminal size Cu mm Terminal bolt size (included) Metric thread diameter x length mm M6x20 M8x25 Fuse-links bolts tightening torque Nm 4 4 *) = Utilization category B 1) Ambient temperature 60 C: derating 20% 2) Mounting on "ceiling": derating 10%. Mounting on wall, horizontal fuses: derating 8%. 3) Some fuse links limit these figures further. Starting current characteristics must be considered separately. K 4) Approval pending 5) 30 lb.in with cable size #14-10, 35 lb.in with cable size #8-4 For the most current product performance data visit ep.mersen.com and use catalog search. K23
5 Technical Data Technical data according to UL/cULus General purpose amp rating pf= to 40 C A VAC Max. operating voltage VDC V HP/A 125.0/ / / /602.0 pf= Three phase 480 V HP/A 250.0/ / / /590.0 Max. horsepower rating / motor FLA current 600 V HP/A 350.0/ / / / V HP/A Single phase 240 V HP/A ka Short circuit rating with fuse, 3 and 4-pole UL/CSA fuse size A types UL/CSA fuse type J J L L Min. electrical endurance pf= operation cycles Mechanical endurance operation Terminal lug kits OZXA-400 OZXA-800 OZXA-800 OZXA-1200 Wire range AWG #2-600MCM (2)#2-600MCM (2)#2-600MCM (4)#2-600MCM Wire tightening lb.in Torque Lug mounting lb.in Technical data according to IEC Rated insulation voltage Pollution degree 3 V Dielectric strength 50 Hz 1min. kv Rated impulse withstand voltage kv Rated thermal current in ambient 40 C / In open air A/W 400/45 630/60 800/ /110 max. fuse power dissipation 1) In enclosure 2) A/W 400/30 570/50 720/ /85...with minimum cable cross section Cu mm x185 2x240 2x400 Rated operational current, AC-23A up to 500 V A *) 690 V A *) Rated operational power, AC-233) The kw-ratings are accurate for three-phase 1500 R.P.M. standard asynchronous motors. 230 V kw *) 400 V kw *) 415 V kw *) 500 V kw *) 690 V kw *) up to 500 V A Rated breaking capacity in category AC V A Rated short-time withstand current, 1 s r.m.s. -value ka Power loss / pole With rated current, without fuse W pole switch fuses kg Weight without accessories 4-pole switch fuses kg Built-in terminal size Cu mm 2 Terminal bolt size (included) Metric thread diameter x length mm M10x30 M12x40 M12x40 M12x50 Fuse-links bolts tightening torque Nm *) = Utilization category B 1) Ambient temperature 60 C: derating 20% 2) Mounting on "ceiling": derating 10%. Mounting on wall, horizontal fuses: derating 8%. 3) Some fuse links limit these figures further. Starting current characteristics must be considered separately. 4) Approval pending 5) 30 lb.in with cable size #14-10, 35 lb.in with cable size #8-4 K24
6 UL-Listed Fused Switches - Front-Operated Part # Description Ref # Weight Pkg M30CC12 Fused switch, 30A, CC, 1+2 pos. S M30J12 Fused switch, 30A, J, 1+2 pos. V M60J12 Fused switch, 60A, J, 1+2 pos. X M60J30 Fused switch, 60A, J, 3-p on L Y M100J30 Fused switch, 100A, J, 3-p on L A M200J30 Fused switch, 200A, J, 3-p on L C M400J30 Fused switch, 400A, J, 3-p on L D M600J30 Fused switch, 600A, J, 3-p on L E M800L30 Fused switch, 800A, L, 3-p on L F M1200L30 Fused switch, 1200A, L, 3-p on L G UL-Listed Fused Switches - Side-Operated Part # Description Ref # Weight Pkg M30CC30S Switch.fus 30A CC R side oper. T M30J30S Switch.fus 30A J R side oper. W M60J30S Switch.fus 60A J R side oper. Z M100J30S Switch.fus 100A J R side oper. B Other Accessories Part # Description Ref # Weight Pkg FOM2 Flange operationm30j12/m30cc12 Q FOM3 Flange operation M60J12 R FOM4 Flange operation MxxxJ30 S FHC4X Flange handle cable 200A 4X T FHC12 Flange hdle cable 200A NEMA 12 V CABLE36 Flex cable flange oper 36 inch W CABLE60 Flex cable flange oper 60 inch X LUG100 Lugs #14-2/0 100A Switch /6 S LUG200 Lugs #6 300MCM 200A Switch /6 B LUG400 Lugs #2 600MCM 400A Switch /6 C LUG800 Lugs 2x#2 600MCM 800A Switch/6 T LUG1200 Lugs 4x750MCM 1200A Switch/6 V OA1G10 Auxiliary Contact NO P OA3G01 Aux.Contact NC Switch A R OA4B1C Aux.Contact 1+1 SF 40A K OSZ4 Mounting plate OA1G10/OA3G01 L OEA28 Module for SF aux. contacts M Weight in kg without packaging. K For the most current product performance data visit ep.mersen.com and use catalog search. K25
7 Shafts Part # Description Ref # Weight Pkg SFB280 Shaft SwitchFuse 12x12x280mm F SFB325 Shaft SwitchFuse 12x12x325mm G SFB395 Shaft SwitchFuse 12x12x395mm H SPA210 Shaft pistol handle 6x6x210mm P SPA290 Shaft pistol handle 6x6x290mm Q Terminal Shrouds Part # Description Ref # Weight Pkg TSF400-3 Term.shrd 400A Switch.fus3p S TSF600-3 Term.shrd 600A Switch.fus3p T TSF Term.shrd 160A Swch.fus1pL /3 V TSF Term.shrd 160A Swch.fus1pL /4 W TSF Term.shrd 200A Swch.fus1pL /3 J TSF Term.shrd 200A Swch.fus1pL /4 V TSF Term.shrd 800A Swch.fus1pL /3 K TSF Term.shrd 800A Swch.fus1pL /4 W TSF Ter.shrd 1250A Swch.fus1pL /3 L TSF Ter.shrd 1250A Swch.fus1pL /4 X TSF Term.shrd 250A Swch.fus1pL /3 M TSF Term.shrd 250A Swch.fus1pL /4 Y TSF Term.shrd 400A Swch.fus1pL /3 N TSF Term.shrd 400A Swch.fus1pL /4 Z Weight in kg without packaging. Handles Part # Description Ref # Weight Pkg HDF30 Handle direct SF 40A max P HDF200 Handle direct SF 200A P HDF400 Handle direct SF 400A Q HDF800T Handle dir. SF 800A butterfly R HDF1250T Handle dir. SF 1250A butterfly S HDF250T Handle dir. SF 250A butterfly T HDF400T Handle dir. SF 400A butterfly V HB45 Handle black45mm IP65 NEMA 3R L HB45X Handle black 45mm IP65 NEMA 4X M HB65 Handle black65mm IP65 NEMA 3R W HB65S Handle black 65mm Right Side A HB65X Handle black 65mm IP65 NEMA 4X X HB80 Handle black 80mm IP65 NEMA 3R Y HB80X Handle black 80mm IP65 NEMA 4X Z HB95 Handle black 95mm IP65 NEMA 3R N HB95X Handle black 95mm IP65 NEMA 4X P HB125 Handle black125mm IP65 NEMA 3R A HB125X Handle black125mm IP65 NEMA 4X B HB145 Handle black145mm IP65 NEMA 3R C HB145S Handle black 145mm Right Side B HB145X Handle black145mm IP65 NEMA 4X D HB274 Handle black274mm IP65 NEMA 3R D HB274X Handle black274mm IP65 NEMA 4X E HB330 Handle black330mm IP65 NEMA 3R E HB330X Handle black330mm IP65 NEMA 4X F HR45 Handle red 45mm IP65 NEMA 3R Q HR45X Handle red 45mm IP65 NEMA 4X R HR65 Handle red 65mm IP65 NEMA 3R G HR65X Handle red 65mm IP65 NEMA 4X H HR80 Handle red 80mm IP65 NEMA 3R F HR80X Handle red 80mm IP65 NEMA 4X J HR95 Handle red 95mm IP65 NEMA 3R S HR95X Handle red 95mm IP65 NEMA 4X T HR125 Handle red 125mm IP65 NEMA 3R K HR125X Handle red125mm IP65 NEMA 4X L HR145 Handle red 145mm IP65 NEMA 3R M HR145X Handle red 145mm IP65 NEMA 4X N HR274 Handle red 274mm IP65 NEMA 3R G HR330 Handle red 330mm IP65 NEMA 3R H K26
8 M25F, M30CC, M30J Front operated M25F, M30CC, M30J Side operated K For the most current product performance data visit ep.mersen.com and use catalog search. K27
9 M50F, M63D, M60J, Front operated M30x - 63x M30x - 63x M60Jx DIN BS/NFC Class J mm mm mm/in D11 D12 D13 D22 B/F11 B/F12 B/F13 B/F22 J11 J112 J12 J22 A / / / /8.58 B / / / /4.65 C / / /1.38 D / / / /2.81 E / / / /1.41 F / / / /3.56 G / / / /4.98 A / / / /5.96 A / / / /2.97 B / / / /7.15 B / / / /4.15 M50F, M63D, M60J, Side operated M30xxxS - 63xxxS mm M60JxxS mm/in DS01 DS02 DS03 DS04 B/FS01 B/FS02 B/FS03 B/FS04 JS01 JS02 JS03 JS04 A / / / /8.44 B / / / /5.12 C / / /1.38 D / / / /2.44 E / / / /1.41 F / / / /9.11 A / / / /6.79 B / / / /5.61 K28
10 M100J30, Front operated M100Jxx mm/in mm/in mm/in mm/in J01 J02 J03 J04 A 76.5/ / / /7.15 A1 55/ / / /6.30 B1 70/ / / C1 85/ / / /7.48 M100J12, Front operated K M100Jxx mm/in mm/in mm/in mm/in J11 J12 J13 J22 A 113/4/45 148/ / /7.20 B 81/ / / /4.67 A1 90/ / / /3.15 A2 46/ / / /3.15 B1 105/ / / /6.89 B2 52.5/ / / /3.44 C1 120/ / / /7.48 C2 60/ / / /3.74 For the most current product performance data visit ep.mersen.com and use catalog search. K29
11 M100J, side operated M100JxxS mm/in JS01 JS02 JS03 JS04 A 111.5/ / / /8.52 A 128.5/ / / /9.19 A1 71.5/ / / /6.95 B1 88.5/ / / /7.54 C / / / /8.13 M200J, side operated M200JxxS mm/in mm/in mm/in mm/in A 123/ / / /14.28 B 140/ / / /10.95 A1 60.5/ / / /7.82 B1 79.5/ / / /8.57 C1 96.5/ / / /9.24 K30
12 M200J, Front operated Class J fuse types, 1-1 to 2-2 configurations M200xx J11 J12 J13 J22 mm/in mm/in mm/in mm/in A 92/ / / /5.43 B 132/ / / /8.82 A1 104/ / / /7.72 A2 52/2/05 52/ / /3.86 B1 106/ / / /8.46 B2 61.5/ / / /4.23 C1 140/ / / /9.13 C2 70/ / / /4.57 K For Class J fuse types, 0-3 and 3-0 configurations M200J01 M200J02 M200J03 M200J04 mm/in mm/in mm/in mm/in A 89.5 / / / / 8.96 A / / / / 7.82 B / / / / 8.56 C / / / / 9.23 For the most current product performance data visit ep.mersen.com and use catalog search. K31
13 M400D, M400J, 11 to 22 configuration, Front operated M315B30 - M400B30 M400D30 - M400J30 B11 B12 B13 B21 B22 D11 D12 D13 D21 D22 J11 J12 J13 J21 J22 mm mm mm mm mm mm mm mm mm mm mm/in mm/in mm/in mm/in mm/in A / / / / /6.93 B / / / / /7.64 C / / / /8.03 D / / / /12.52 M315x M400x B11 B12 B21 B22 B13 B11/D11/J11 B12/D12/J12 B21/D21/J21 B22/D22/J22 B13/D13/J13 mm mm mm mm mm mm/in mm/in mm/in mm/in mm/in A / / / / /11.46 A / / / / /3.21 B / / / / /12.17 B / / / / ,5/3.56 C / / / / /12.87 C / / / / /3.92 M400D, M400J, 30 or 03 configuration, Front operated M315B30 - M400B30 M400D30 - M400J30 B01 B02 B03 B04 D01 D02 D03 D04 J01 J02 J03 J04 mm mm mm mm mm mm mm mm mm/in mm/in mm/in mm/in A / / / /12.56 B / / / /6.93 C / / / /7.64 M315x M400x B01 B02 B03 B04 B01/D01/J01 B02/D02/J02 B03/D03/J03 B04/D04/J04 mm mm mm mm mm/in mm/in mm/in mm/in A / / / /11.44 B / / / /12.15 C / / / /12.85 K32
14 M400D, M400J, Side operated M315xS-M400xS BS01/JS01 BS02/JS02 BS03/JS03 BS04/JS04 DS01 DS02 DS03 DS04 mm in mm in mm in mm in mm in mm in mm in mm in A B C D A B C K For the most current product performance data visit ep.mersen.com and use catalog search. K33
15 M D, M600J-800L, Front operated D/B/J/L01 D/B/J/L02 D/B/J/L03 D/B/J/L04 A 167/ / / /16.97 B 120/ / / /15.12 C 150/ / / /16.30 D 176/ / / D/B/J/L11 D/B/J/L12 D/B/J/L13 D/B/J/L14 A 253/ / / /16.89 B 205/ / / /15.00 C 235/ / / /16.18 D 261/ / / /17.20 K34
16 M D, M600J-800L, Side operated M600xS-M800xS DS/BS/JS/LS01 DS/BS/JS/LS02 DS/BS/JS/LS03 DS/BS/JS/LS04 mm/in mm/in mm/in mm/in A 238/ / / /19.78 B 213/ / / /18.79 A / / / /16.21 B / / / /17.39 C / / / /18.42 K For the most current product performance data visit ep.mersen.com and use catalog search. K35
17 M1200L, M1250D, Front operated M1200x-M1250x D/L /B01 D/L /B02 D/L /B03 D/L /B04 mm/in mm/in mm/in mm/in A 209/ / / /21.22 A1 166/ / / /19.53 B1 196/ / / /20.71 C1 222/ / / /21.73 M1200x-M1250x D/L /B11 D/L /B12 D/L /B13 D/L /B22 mm/in mm/in mm/in mm/in A 322/ / / /21.34 A1 276/ / / /19.53 B1 306/ / / /20.71 C1 322/ / / /21.73 K36
The safest way to switch power on and off in your industrial control panels.
The safest way to switch power on and off in your industrial control panels. Your problem: You need a range of disconnect switches for your industrial control requirements ranging from Service Entrance
Non-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
Non-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
Complete UL/CSA Disconnect Switch Kits
Product Selection Complete UL/CSA Disconnect Switch Kits Includes disconnect switch, operating handle with defeater mechanism and operating shaft, NFPA handle, auxiliary contacts, and padlock attachment.
FUSERBLOC UL Fusible disconnect switches UL and CSA from 30 to 800 A
Fuse protection The solution for > Motor on-load disconnect > Protection of industrial cabinet > Electrical distribution ul_004_a Strong points fuser-ul_006_a Function FUSERBLOC UL fusible disconnect switches
Bulletin 194R Fused and Non-Fused Disconnects Product Selection
Product Selection 4th Pole Modules Maximum Hp Ratings Rated 1-Phase (60 Hz) -Phase (60 Hz) DC Current [A] 1V 240V 240V 480V V 12V V Ref. Non-d 0 2 7. 1 A2 194R-0-NN 60 1 0 40 B2 194R-60-NN UL Class CC
FUSERBLOC UL Fusible disconnect switches UL and CSA 30 to 800 A
Fuse protection The solution for > Motor load break. > Protection of industrial cabinet. > Electrical distribution. ul_004_a Strong points fuser-ul_006_a Function FUSERBLOC UL fusible disconnect switches
Bulletin 194R Fused and Non-Fused Disconnects Product Selection
Product Selection 4th Pole Modules Maximum Hp Ratings Rated 1-Phase (60 Hz) -Phase (60 Hz) DC Current [A] 10V 40V 40V 480V V 1V 0V Ref. Cat. No. Non-d 0 7. 1 0 A 194R-0-NN 60 1 0 40 B 194R-60-NN UL Class
Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications
Protection and Connection Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications DC switch-disconnectors
TeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview
FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview Supplementary Protectors / Miniature Circuit Breakers Page System overview 10/003 10/001 Supplementary protectors
SOCOMEC SIRCOVER MANUALLY OPERATED CHANGEOVER SWITCHES
MANALL OPERATED CHANGEOER SWITCHES are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application:
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
Disconnect Switches. Safe Switching and Disconnecting
IB105-UK_U1_U4_Pfade.indd 2-3 14.04.2005, 16:51:30 Disconnect Switches Safe Switching and Disconnecting Disconnect Switches from Salzer are hand-operated switchgear for main circuits and are offered as
IDE Load break switches for machine control Remotely trippable switch from 32 to 160 A
The solution for Load break switches > Industry. > Non critical buildings. > Public Access Sites. > High Rise Buildings. ide_021_a_1_cat ide_022_a_1_cat IDE 4x40 A External operation IDE 4x40 A Direct
63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
the Santon FCS-type switch Disconnect Superior Switch Solutions
the Santon FCS-type switch Disconnect Superior Switch Solutions The technical information given in this table applies to 3 and 4 pole fuse combination switches. FRAME SIZE 1 1 2 3 3 4 4a 4b 5 6 6 nominal
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
1492-SP Supplementary Protectors
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-
CS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
OVERLOAD RELAYS POWER & ACTUATION PROVEN. series
POWER & ACTUATION OVERLOAD RELAYS series Need reliable, accurate overload and phase-loss protection for your motors? c3controls Series Bimetallic Overload Relays provide unmatched protection and can be
24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD
United States 24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Approvals: IEC 60947-2 Rated
Contents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.4 Contents Description Page Product Description............................. 677 Standards and Certifications...................... 677 Product Selection..............................
3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
NF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC1010D0201 28/03/11 NFE-.. / NFZE-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
60103 Circuit Breaker
6003 Circuit Breaker United States MINIATURE CIRCUIT BREAKER, 20/240VAC, 2A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Circuit Breaker Type: Standard
194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure
Allen-Bradley 1492-RCDA4A40
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Suitable for DIN Rail mounting Approval marks are easily visible on dome Terminal design helps
Application Switchgear for industrial and advanced commercial applications. U e V AC 277/480 Y V DC 60
DATASHEET - FAZ-C5/2-RT Miniature circuit breaker (MCB), 5A, 2p, C-Char, AC Part no. FAZ-C5/2-RT Catalog No. 102203 Eaton Catalog No. FAZ-C5/2-RT EL-Nummer 1691799 (Norway) Similar to illustration Delivery
MULTI 9 System Catalog UL Recognized C60N Supplementary Protectors
UL Recognized C60N Supplementary Protectors B Curve C60N Supplementary Protectors 1 MG24110 MG24125 MG24140 MG24155 15 MG17406 MG17436 MG17461 1.2 MG17402 MG17432 16 MG24118 MG24133 MG24148 MG24163 1.5
Motor protection circuit breakers
Wide adjustment range 0. to 00A IEC breaking capacity Icu 50kA (400V) up to 00A Suitable for isolation Comprehensive line of accessories Magnetic-only version Automatic trip indicators High reliability
TeSys contactors From 115 to 2750 A
Selection guide From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification,
Supplementary Circuit Protectors Type GSB63
Supplementary Circuit Protectors Type GSB63 l Protection of circuits against short circuit and overload currents l UL1077 supplementary protection l 1,, 3 and 4 pole arrangements l 13 amperage sizes up
Switch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
ST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077
MINIATURE CIRCUIT BREAKERS ST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077 The ST 200 M miniature circuit breaker provides supplementary
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically
RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary
Characteristics voltage control relay RM17-U - range 183..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...
Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics (S-type MO or
ASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
MOTOR & CIRCUIT PROTECTION
2 MOTOR & CIRCUIT PROTECTION Motor Protection Circuit Breakers p2-1 Motor Protection Relays p2-13 Thermistor Protection Relay p2-18 Fuse Holders p2-20 Miniature Circuit Breakers p2-23 Residual Current
MOTOR PROTECTION CIRCUIT BREAKERS
MOTOR PROTECTION CIRCUIT BREAKERS PAGE -2 PAGE -2 SMA Thermal trip adjustment ranges 9-32A (5 choices) Breaking capacity Icu at 400V: 50kA Suitable for mounting in consumer switchboards with minimum 58mm
K-Line Mini - Contactors, Overload Relays and Accessories
K-Line Mini - Contactors, Overload Relays and Accessories Class 8502 CONTENTS Description...................................................... Page General Information...............................................
J7MN. Ordering Information. Motor Protection Circuit Breaker. Model Number Legend. MPCB system. Options. Motor Protection Circuit Breaker J7MN I-1
Motor Protection Circuit Breaker J7MN ) MPCB system Rotary and switch types Rated operational current 32 A, 63 A and 00 A Switching capacity up to 00 ka/400 V Fixed short-circuit release = 3 x I u Overload
Mini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
MULTI-POLE PHOTOVOLTAIC SYSTEMS. COMPACT and MODULAR Housing
MULTI-POLE Lightning Current and Surge Arresters for PHOTOVOLTAIC SYSTEMS Class I / (B+C) and Class II / (C) COMPACT and MODULAR Housing 44 PV ISPRO BS(R) 12,5 The PV ISPRO BS(R) 12,5 series of over voltage
MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors
B Curve NC100H Supplementary Protectors Rating 1P 2P 3P 4P 80 MG27164 MG27175 MG27186 MG27197 MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors C Curve NC100H Supplementary Protectors
Technical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
SIRCO Load break switches for power distribution from 125 to 5000 A
The solution for Load break switches sirco_456_a_1_cat > Main switchboard > Distribution panel > Emergency breaking > Network coupling > Local safety breaking sirco-ac_001_a_1_cat SIRCO 3 x 250 A direct
RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary
Characteristics voltage control relay RM35-U - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
Safety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
Application Switchgear for industrial and advanced commercial applications. U e V AC 240/ (per pole) I cs 7,5 ka
DATASHEET - FAZ-C16/1 Miniature circuit breaker (MCB), 16A, 1p, C-Char, AC Part no. FAZ-C16/1 Catalog No. 278561 Eaton Catalog No. FAZ-C16/1 EL-Nummer 0001695154 (Norway) Similar to illustration Delivery
Protection Equipment
Protection Equipment Price groups 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J, 143, 401 /2 Introduction Motor starter protectors/ circuit breakers SIRIUS 3RV2 motor starter protectors up to 40 A / General data
9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
Square D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
Description Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Delivery program Contactor relay, 3N/O+1N/C, DC current Part no. DILA-31(24VDC) Catalog No. 276379 Eaton Catalog No. XTRE10B31TD EL-Nummer 4130206 (Norway) Product range DILA relays Application Contactor
WEG Contactors - CWM and CWME Series
Inside (877) 789 Fax () 87 WEG Contactors CWM and CWME Series International () 07 The CWM generalpurpose contactor line has been designed taking into consideration industrial duty and reliability in mind.
Circuit Breakers Type CTI 25M, CTI 45MB
Data sheet Circuit Breakers Type CTI 25M, CTI 45MB Circuit breakers for short circuit and overload protection of motor applications cover the current range 0.1 45 A (AC-3 rating). The product range is
FUSERBLOC from 30 to 800 A
from 30 to 800 Product presentation FB30DT FB30SO Ferraz Shawmut FUSERBLO disconnect switches are extremely durable, manually operated, fusible disconnect switches. The switches employ double break contacts
RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA
Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching
Siemens AG SENTRON 3NJ4, 3NJ5 In-Line Fuse Switch Disconnectors up to 2000 A
Switch Disconnectors Introduction Overview All key product features at a glance Compliant with IEC/EN 60439-1, IEC/EN 6094-3 Voltage levels up to 690 V AC Rated operational current from 160 A to 2000 A
Motor-protective circuit-breaker, 3p, Ir=16-25A, screw connection. Product range PKZM4 motor protective circuit-breakers up to 65 A
DATASHEET - PKZM4-25 Delivery program Motor-protective circuit-breaker, 3p, Ir=16-25A, screw connection Part no. PKZM4-25 Catalog No. 222352 Eaton Catalog No. XTPR025DC1NL EL-Nummer 0004355158 (Norway)
Manual Motor Control Switches and Disconnects
Manual Motor Control Switches and Disconnects Vario, GS1, GS2, and LK4 9421CT0301R09/12 2013 CONTENTS Description............................................. Page Mini-VARIO and VARIO Manual Motor Control
Rated operational Control Voltage Uc Supply Voltage Connection Rated operational current 40 C voltage Ue Us 25A AC-53a 32A AC-53a
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
Selection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
RM4JA01F current measurement relay RM4-J - range ma V AC
Characteristics current measurement relay RM4-J - range 3..1000 ma - 110..130 V AC Main Range of product Product or component type Relay type Relay name Relay monitored parameters Power consumption in
FUSERBLOC LMDC Fuse combination switches FUSERBLOC Live Maintenance DC
Fuse protection The solution for > Live maintenance of speed drives supplied by a common DC bus > Live maintenance of PV inverters connected in parallel on a same circuit fuser-lm_2_a Strong points > Compact
Section 4 Ground-Fault Protection Devices
Multi 9 System Catalog Section 4Ground-Fault Protection Devices Section 4Ground-Fault Protection Devices Selection Table The Multi 9 System includes one UL Listed and three IEC rated product families that
RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.
Characteristics voltage control relay RM17-U - range 9..15 V DC Price* : 70.64 GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
Ordering Key. Type Rated Operational Rated operational Control Voltage Uc Options
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
Selection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
Technical data. Safety parameters: see page 333. DC maximum residual ripple: 10% Supply voltage tolerance: DC consumption: Control circuit
Safety module CS DM-01 Technical data Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94 Protection degree IP40 (housing), IP20 (terminal strip) Dimensions see page 283, design A Two-hand
Motors Automation Energy Transmission & Distribution Coatings. DWB Molded Case Circuit Breakers DWB
Motors Automation Energy Transmission & Distribution Coatings DWB Molded Case Circuit Breakers DWB Molded Case Circuit Breakers Molded Case Circuit Breakers DWB Summary Presentation 0 General Characteristics
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
ATS22D75S6 soft starter-ats22-control 220V-power 230V(18.5kW)/ V(37kW)/500V(45kW)
Characteristics soft starter-ats22-control 220V-power 230V(18.5kW)/400...440V(37kW)/500V(45kW) Price* : 683.00 GBP Main Range of product Altistart 22 Product or component type Product destination Product
RM4JA32MW current measurement relay RM4-J - range A V AC DC
Characteristics current measurement relay RM4-J - range 0.3..15 A - 24..240 V AC DC Main Range of product Product or component type Relay type Relay name Relay monitored parameters Power consumption in
CS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
RM35TF V AC
Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
Magnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
ATS22C21S6U softstarter-ats22-control110vpower208v(60hp)/230v(75hp)/460v(150hp)/575v(200hp)
Characteristics softstarter-ats22-control110vpower208v(60hp)/230v(75hp)/460v(150hp)/575v(200hp) Main Range of product Altistart 22 Product or component type Product destination Product specific application
Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protectors Specifications Bulletin Number 1492, 1692
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protectors Specifications Bulletin Number 1492, 1692 Topic Page 1489-M Miniature Circuit Breakers 1 1492-SP Supplementary Protectors
ATS22C41Q soft starter-ats22-control 220V-power 230V(110kW)/ V(220kW)
Characteristics soft starter-ats22-control 220V-power 230V(110kW)/400...440V(220kW) Complementary Assembly style Function available Power supply voltage limits Main Range of product Altistart 22 Product
5/2 Product overview. 5/3 Distribution board components. 5/9 Built-in components. 5/17 Mounting components 5. Siemens ET B1 10/2009
Siemens AG 9 BETA Protecting SR Busbar Systems /2 Product overview /3 Distribution board components /9 Built-in components /17 Mounting components Siemens ET B1 10/9 BETA Protecting SR Busbar Systems Siemens
Application Switchgear for industrial and advanced commercial applications. U e V AC 240/ (per pole)
DATASHEET - FAZ-C10/2 Miniature circuit breaker (MCB), 10A, 2p, C-Char, AC Similar to illustration Part no. FAZ-C10/2 Catalog No. 278756 Eaton Catalog No. FAZ-C10/2 EL-Nummer 1695166 (Norway) Delivery
Close Protection from Moeller. miniature branch circuit breakers miniature supplementary protectors
Close Protection from Moeller miniature branch circuit breakers miniature supplementary protectors FAZ branch circuit breakers General Information... Selection Tables Trip Characteristic C - Box terminals...
SIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET
Product Data Sheet Technical Publications SIEMENS HEALTHCARE INTEGRATED ELECTRICAL CABINET for ARTIS Q / Q.ZEN / ZEE BIPLANE IECAX480V225A Main Disconnect Panel Bevco Engineering Company, Inc. CONFIDENTIAL
Magnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
low voltage GLOBAL CATALOGUE RANGE Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters
CTLOGUE GLOBL RNGE 2. Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters 2. 2. Product Overview. 2.2 Overload Relay Setting Range 2. - 2.8 Product Specifications 2.9-2. Contactor
Issued February DATA SHEET 5SX2 MCB. Based on Siemens Industrial Control Catalog
Issued February 2011 DATA SHEET 5SX2 MCB Based on Siemens Industrial Control Catalog General Data Trip characteristics Tripping characteristics acc. to EN 60 898 Tripping characteristic A, -5 Type A characteristic
K1D012ULH cam changeover switch - 2-pole A - screw mounting
Characteristics cam changeover switch - 2-pole - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing
194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable f padlocks) E-FA Painted Steel Enclosure
MULTI 9 System Catalog
MULTI 9 System Catalog Class 80 CONTENTS Page Schneider Electric Brands Section Introduction... Section UL Rated Protection Devices... Section IEC 097- Rated Protection Devices... Section IEC Rated Ground-fault
Magnetically Actuated Safety Interlock Switches
Rev. 7.07 C US Conforms to EN1088, EN292, EN6020-1 CSA approved MA Series Magnetically Actuated Safety Interlock es Large selection choose from a large selection of contact configurations housed in plastic
1.3. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZS Circuit Breaker. UL 1077 DIN Rail Supplementary Protectors
. Miniature Circuit Breakers and Supplementary Protectors UL 077 DIN Rail Supplementary Protectors WMZS Circuit Breakers Contents Description WMZS Circuit Breaker Standards and Certifications................
WMS SUPPLEMENTARY PROTECTORS
WMS Supplementary Protectors Overview WMS SUPPLEMENTARY PROTECTORS Product Specification The WMS Supplementary Protector is a dual-rated product for both AC and DC supplies, in accordance with UL 1077
RM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
Varius SUMMARY OF MODELS OF HRC FUSE-LINKS
SUMMARY OF MODELS OF HRC FUSE-LINKS PNA000 PHNA000 PNA00 PHNA00 Rated current I n up to A up to 0 A up to A up to 0 A Rated voltage U n AC 00 V, 00 V 90 V 00 V 90 V DC 0 V 0 V 0 V 0 V Fuse-link size 000
Miniature Circuit Breakers and Supplementary Protectors. Contents
. Optimum and Efficient Protection for Every Application Product Overview Features Optimum product quality, tested reliability and safety stand for best protection of personnel, installations and plant.
ATS22D62Q soft starter-ats22-control 220V-power 230V(15kW)/ V(30kW)
Characteristics soft starter-ats22-control 220V-power 230V(15kW)/400...440V(30kW) Main Range of product Altistart 22 Product or component type Product destination Product specific application Component