NVP-903 Series. Multi-Stream Network Video Encoder REFERENCE GUIDE

Transcription

1 NVP-903 Series Multi-Stream Network Video Ecoder REFERENCE GUIDE

2 NVP-903 Series User Maual Table of Cotets 1 Itroductio Product Overview Product Features Pael Desig Frot Pael NVP-903-R NVP-903-R Rear Pael Web Cotrol [Ecoder Mode] Log I Log i via Etheret Log i via Wi-Fi Cofiguratio Streams Ecoder Settig Figure3.10 Ecoder Settig Click Apply to save the cofiguratio Advace Tools ETH Settig AP Iformatio Logi Iformatio Device Iformatio HD Stream Recordig Help Fuctio Web Cotrol [Decoder Mode] Log I Log i via Etheret Log i via Wi-Fi Work Mode Protocol... 29

3 NVP-903 Series User Maual Decoder Advace Tools ETH Settig AP Iformatio Logi Iformatio Device Iformatio Techical Specificatios... 36

4 1 Itroductio NVP-903 Series User Maual 1.1 Product Overview NVP-903 are etwork video ecoder ad decoder series, which are specialized for high defiitio real-time video streamig applicatios. It provides flexible streamig for low-badwidth trasmissio applicatios usig H.264 video ad AAC audio ecodig, supportig FLV over RTMP streamig output, thus seamlessly coectig to streamig media server. The third geeratio NVP series ecoder NVP-903, support 3 ecodig streams output for multi-scree applicatio. Moreover, NVP-903 itegrates H.264 decodig fuctios with HDMI output, to form a versatile media delivery solutio over IP etwork. Itegrated with Cato leadig R2TP techology, NVP-903 ad NVP decoders ca also realize high quality live video cotributio ad distributio over Ope Iteret. 1.2 Product Features Support 1080P@59.94 FULL-HD H.264 ecodig/decodig Support HD-SDI, HDMI, Aalog AV for video & audio iput Support 1 chael ecodig with 3 ecodig streams output, with differet bit rate/resolutio for multi-scree applicatio Support two chael video & audio iput ad ecodig idepedetly (NVP-903-R2 oly) Support RTMP PUSH, TS over HTTP, TS over UDP IP output, seamlessly coectig to streamig media server Support high bit rate file recordig ito SD card Itegrated with H.264 decodig fuctio with HDMI output Support Cato proprietary R2TP protocol for cotributio ad distributio over Ope Iteret Iteral hot-spot, support web UI cotrol via PC/Adroid/iOS Web cotrol laguage ca switch betwee Chiese ad Eglish 4 4

5 2 Pael Desig NVP-903 Series User Maual 2.1 Frot Pael NVP-903 Compact desig: x 44.5 x 153.0mm, 900g Figure2.1.1 NVP-903 Frot Pael NVP-903 Frot Pael cosists of a E Ik scree ad 3 idicators: Power, Data ad Stream. E Ik: Displays device basic ifo. The ifo i E Ik will ot be vaished after powered dow. Work Mode: Curret device work mode: NVP-903-E (Ecoder Mode) or NVP-903-D (Decoder Mode) SSID: Device serial umber / SSID of NVP-903 iteral hot-spot(ap) Password: Password of NVP-903 iteral hot-spot(ap) Stream IP: Device IP address for streamig ad web cotrol Idicators: Displays curret ruig status Power: [Blue] Device is powered up ow Data: [Gree] Device recogizes the iput source successfully. [Red] Device does ot recogize the iput source ow Stream: [Gree] Device is coected to target server/decoder ad pushig/pullig stream to it; [Red] Device is ot pushig/pullig stream to target server/decoder. 5 5

6 NVP-903 Series User Maual Tips: If Data idicators keep red whe you have plugged i the video source, check video/audio iput settigs via web cotrol. Make sure the video/audio type i iput settig ad the video source type to be the same NVP-903-R1 1RU Frame Structure: x 42.0 x 350.0mm 4.0kg Figure2.1.2 NVP-903-R1 Frot Pael NVP-903-R1 Frot Pael cosists of a E Ik scree ad 3 idicators: Power, Data ad Stream. E Ik: Displays device basic ifo. The ifo i E Ik will ot be vaished after powered dow. Work Mode: Curret device work mode: NVP-903-R1-E (Ecoder Mode) or NVP-903-R1-D (Decoder Mode) SSID: Device serial umber / SSID of NVP-903-R1 iteral hot-spot(ap) Password: Password of NVP-903-R1 iteral hot-spot(ap) Stream IP: Device IP address for streamig ad web cotrol Idicators: Displays curret ruig status Power: [Blue] Device is powered up ow Data: [Gree] Device recogizes the iput source successfully. [Red] Device does ot recogize the iput source ow Stream: [Gree] Device is coected to target server/decoder ad pushig/pullig stream to it; [Red] Device is ot pushig/pullig stream to target server/decoder. Tips: If Data idicators keep red whe you have plugged i the video source, check video/audio iput settig via web cotrol. Make sure the video/audio type i iput settig ad the video source type to be the same. 6 6

7 NVP-903 Series User Maual NVP-903-R2 1RU Frame Structure: x 42.0 x 350.0mm 4.0kg Figure NVP-903-R2 Frot Pael NVP-903-R2 Two ecoder iformatio is displayed o the same E Ik scree; each correspods to three idicator light. E Ik: Displays device basic ifo. The ifo i E Ik will ot be vaished after powered dow. CH1-TYPE: First ecoder curret work mode: NVP-903-R-E (Ecoder Mode) or NVP- 903-R-D (Decoder Mode) CH2-TYPE: Secod ecoder curret work mode: NVP-903-R-E (Ecoder Mode) or NVP-903-R-D (Decoder Mode) CH1-IP: IP address for the first ecoder CH2-IP: IP address for the secod ecoder Idicators: Displays curret ruig status Power: [Blue] Device is powered up ow Data: [Gree] Device recogizes the iput source successfully. [Red] Device does ot recogize the iput source ow Stream: [Gree] Device is coected to target server/decoder ad pushig/pullig stream to it; [Red] Device is ot pushig/pullig stream to target server/decoder. Tips: If Data idicators keep red whe you have plugged i the video source, check video/audio iput settig via web cotrol. Make sure the video/audio type i iput settig ad the video source type to be the same. 7 7

8 NVP-903 Series User Maual 2.2 Rear Pael NVP-903 Figure2.2.1 NVP-903 Rear Pael NVP-903 Rear Pael cosists of power iterface, video/audio iterface, etwork iterface ad SD card slot. Power: Coect NVP-903 power adapter to power up the device SDI: Ecoder Mode: HD/SD-SDI video/audio source iput Video: Ecoder Mode: Aalog video source iput Audio (L&R): Ecoder Mode: Aalog audio source iput HDMI IN: Ecoder Mode: HDMI video/audio source iput HDMI OUT: Ecoder Mode: HDMI video/audio source loop-out Decoder Mode: HDMI video/audio output ETH: Network iterface for streamig ad device web cotrol USB: USB2.0 for Wi-Fi dogle fuctio (I developig) SD Card: Isert SD card for video recordig (I developig) 8 8

9 NVP-903 Series User Maual NVP-903-R1 Figure2.2 NVP-903-R1 Rear Pael NVP-903-R1 Rear Pael cosists of power iterface, video/audio iterface, etwork iterface ad SD card slot. Power: Coect NVP-903-R1 power lie to power up the device SDI: Ecoder Mode: HD/SD-SDI video/audio source iput Video: Ecoder Mode: Aalog video source iput Audio (L&R): Ecoder Mode: Aalog audio source iput HDMI IN: Ecoder Mode: HDMI video/audio source iput HDMI OUT: Ecoder Mode: HDMI video/audio source loop-out Decoder Mode: HDMI video/audio output ETH: Network iterface for streamig ad device web cotrol USB: USB2.0 for Wi-Fi dogle fuctio (I developig) SD Card: Isert SD card for video recordig (I developig) 9 9

10 NVP-903 Series User Maual NVP-903-R2 Figure2.2.3 NVP-903 Rear Pael NVP-903-R2 Two ecoder each correspodet to power iterface, video/audio iterface, etwork iterface ad SD card slot. Power: Coect NVP-903-R2 power adapter to power up the device SDI: Ecoder Mode: HD/SD-SDI video/audio source iput (Decoder mode ca ot output HD/SD-SDI video/audio source) Video: Ecoder Mode: Aalog video source iput Audio (L&R): Ecoder Mode: Aalog audio source iput HDMI IN: Ecoder Mode: HDMI video/audio source iput HDMI OUT: Ecoder Mode: HDMI video/audio source loop-out Decoder Mode: HDMI video/audio output ETH: Network iterface for streamig ad device web cotrol USB: USB2.0 for Wi-Fi dogle fuctio (I developig) SD Card: Isert SD card for video recordig 10 10

11 3 Web Cotrol [Ecoder Mode] NVP-903 Series User Maual 3.1 Log I NVP-903 series support PC web cotrol via Etheret port, it also supports PC/Smartphoe/Pad wireless web cotrol via NVP-903 iteral hotspot. NVP-903-R2 has two ecoders, each eeds to be carried out o the website logi ad settig separately. Refer to the IP address display o the frot pael E Ik scree to logi ad set up idividually Log i via Etheret 1) Prepare a computer with Etheret port ad Iteret web browser. 2) Coect your PC to the NVP-903 ETH port via Etheret. 3) Cofigure computer IP address, make sure that NVP-903 ad the computer IP are i the same etwork segmet 4) Iput the device IP address i the web browser, it will displays the Log i page, as follows: (Default IP Address: ) Figure3.1 Log i 5) Type i the Accout ad Password to logi. (Default Accout: admi; Default Password: admi) Log i via Wi-Fi 1) Prepare a PC/Pad/Smartphoe with Wi-Fi fuctio ad Iteret web browser. 2) Search Wi-Fi SSID of NVP-903 iteral hotspot(ap) ad coect your PC/Pad/Smartphoe to it. (Default AP Password: ) 11 11

12 NVP-903 Series User Maual 3) Iput the device IP address i the web browser, it will displays the Log i page, as i Figure 3.1 4) Type i the Accout ad Password to logi. (Default Accout: admi; Default Password: admi) TIPS; SSID of NVP-903 iteral hotspot (AP) will be displayed i the E-Ik of device frot pael. 3.2 Cofiguratio Click Cofiguratio i mai meu to eter the basic settig page, as follows: Figure3.2 Cofiguratio I Cofiguratio page, users ca cofigure basic settigs of video/audio source, trasport protocol ad device IP settig

13 NVP-903 Series User Maual Click Apply to save the cofiguratio Iterface Select the video/audio source type to ecode ad the trasport protocol for streamig. Figure3.3 Iterface Video: Video Iput: Video type of video source settig Active: Video source status. ON: Device has recogized this type of video source; OFF: Device has ot recogized this type of video source Iput Format: Format of video iput source. Audio: Audio Iput: Audio type of audio source settig Active: Audio source status. ON: Device has recogized this type of audio source; OFF: Device has ot recogized this type of audio source Sample Freq(HZ): Samplig rate of audio iput source

14 NVP-903 Series User Maual Meu Name Table3-1 Iterface Rage Iterface Video Iput Source SDI HDMI CVBS ColorBar (Iteral Source) BlackField (Iteral Source) Audio Iput Source SDI-Ch1/2 SDI-Ch3/4 SDI-Ch5/6 SDI-Ch7/8 HDMI Aalog 1KHz (Iteral Source) Silece (Iteral Source) Trasport Protocol R2TP R2TP-S UDP HTTP (TS over HTTP) RTMP (RTMP Push) Streams NVP-903 support 1 chael video/audio source iput with 3 chael ecodig streams output. The ecodig streams ca be cofigured with differet target address. Trasport Protocol: Curret trasport protocol for 3 ecodig streams Trasmittig: NVP-903-R2 is trasmittig the stream to target device ow, ad it will display realtime trasmittig bit rate Coectig: NVP-903-R2 is tryig to coect to target device ow Discoected: NVP-903-R2 does ot trasmit the stream to target device

15 NVP-903 Series User Maual Click Trasmittig the real time stream graph will pop up as the picture show below: Figure3.4 Real time Stream graph 1) UDP Figure3.5 UDP Eable: Eable curret ecodig streams to trasmit. ON: Eable the trasmittig; OFF: Disable the trasmittig Port: Trasport port for UDP trasmissio. Rage: 1024~65535 IP Address: IP address of target device to receive UDP streams. 2) HTTP (TS over HTTP) Figure3.6 HTTP 15 15

16 NVP-903 Series User Maual For HTTP trasmissio, NVP-903 series will geerate a stream URL for each ecodig chael (e.g. Cofigure target decoder/server with this stream URL to pull the stream for NVP ) RTMP Figure3.7 RTMP For RTMP trasmissio, the stream URL is geerated by target RTMP streamig server. Cofigure NVP-903 with this stream URL to push the stream to RTMP streamig server. Eable: Eable curret ecodig streams to trasmit. ON: Eable the trasmittig; OFF: Disable the trasmittig Port: Trasport port for RTMP trasmissio. Default: 1935 IP Address: IP address of target RTMP streamig server Applicatio: The Applicatio ifo i the stream URL Stream: The Stream ID i the stream URL 4) R2TP Figure3.8 R2TP Eable: Eable curret ecodig streams to trasmit. ON: Eable the trasmittig; OFF: Disable the trasmittig 16 16

17 NVP-903 Series User Maual Port: Trasport port for R2TP trasmissio. Rage: 1024~ Please make sure R2TP port of NVP-903 ad target decoder device to be the same. IP Address: IP address of target decoder device. Tips: R2TP is the proprietary trasport protocol of Cato Techology. For R2TP trasmissio, please make sure the decoder device support R2TP protocol. 5) R2TP-S Figure3.9 R2TP-S Eable: Eable curret ecodig streams to trasmit. ON: Eable the trasmittig; OFF: Disable the trasmittig Port: Trasport port for R2TP-S trasmissio. The R2TP-S port is provided by target R2TP Relay Server IP Address: IP address of target R2TP Relay Server ID: Trasport ID for R2TP-S trasmissio. The trasport ID is provided by target R2TP Relay Server 17 17

18 NVP-903 Series User Maual Ecoder Settig Figure3.10 Ecoder Settig I the ecoder settig page, user ca cofigure the ecode settigs of 3 ecodig streams separately. Click Chael1/Chael2/Chael3 colum to select the ecodig chael. Click Apply to save the cofiguratio. Table 3-2 Ecoder Settig Meu Name Advace Video Compress Profile High Mai Baselie Video Compress Level 1.1/1.3/2.0/2.1/2.2/2.3/3.0/3.1/3.2/4.0/4.1/4.2 Video GOP IP IBBP Video Bitrate Mode CBR 18 18

19 NVP-903 Series User Maual VBR Video Ecode Format PAL 1920*1080P (Oly Chael1) 1920*1080P_25Hz 1920*1080I 1440*1080P 1440*1080I 960*1080I 1280*720P 1280*720P_25Hz 720*576P 720*576I 720*576P_25Hz 640*360P 352*288P NTSC 1920*1080P (Oly Chael1) 1920*1080P_29.97Hz 1920*1080I 1440*1080P 1440*1080I 960*1080I 1280*720P 1280*720P_29.97Hz 720*480P 720*480I 720*480P_29.97Hz 640*360P 352*240P Video Bitrate (Kbps) CBR HD: Kbps SD: Kbps VBR HD: Kbps SD: Kbps Audio Compress STD AAC-LC AAC-HE MPEG1-Layer

20 NVP-903 Series User Maual Audio Track Stereo Moaural DualMoo Audio Bitrate (Kbps) AAC-LC AAC-HE MPEG1-Layer For OSD settig, please refer to Chapter 3.4 OSD i this maual. Tips: 1. For Video Ecoder Format, Chael 1 support up to 1920*1080P_59.94/50Hz, Chael 2 & Chael 3 support up to 1920*1080P_29.97/25Hz. 2. NVP-903 support ecodig format up-scaler ad dow-scaler, however it caot trasform the frequecy betwee PAL ad NTSC

21 NVP-903 Series User Maual 3.3 Advace Tools I Tools colum, user ca upgrade or reboot the device, reset device to default settig. Figure3.11 Tools 1) Upgrade System Click Choose the update package to select the upgrade package i PC, ad click Upgrade to upgrade. The upgrade process will eed about 2 miutes, ad device will reboot automatically. 2) Reboot System Click Reboot to reboot the device. The reboot process will eed about 1 miute. 3) Factory Reset Click Factory Reset to recover to the default settigs. The reset process will eed about 2 miutes, ad device will reboot automatically. 4) Pig Use the pig tools to cofirm the coectio status betwee NVP-903 ad target device. Type i the target IP address ad click Pig to get the result. Figure3.12 Pig 21 21

22 NVP-903 Series User Maual Tips: Please do ot power up the device durig upgrade or factory reset process. The web Page will refresh automatically which meas the process is already fiished ETH Settig I ETH Settig colum, user ca cofigure device IP address. Figure3.13 ETH Settig DHCP: Select IP settig mode. OFF: Maual mode; ON: DHCP mode Etheret MAC: Device MAC address IP Address: Device IP address for video streamig ad web cotrol Sub Mask: Net mask of device IP settig Gateway: Gateway of device IP settig DNS: DNS server of device IP settig Click Apply to save the cofiguratio AP Iformatio I AP Iformatio colum, user ca chage the password of device AP. Figure3.14 AP Iformatio 22 22

23 NVP-903 Series User Maual SSID: To view SSID of device AP. SSID of AP is the same as device serial umber. New Password: To set ew password of device AP. Default password: Cofirm Password: To refill the ew password to cofirm. Click Apply to save the cofiguratio Logi Iformatio I Logi Iformatio colum, user ca chage the password for web log i. Figure3.15 Logi Iformatio Userame: To view accout ame to log i. Default: admi New Password: To set ew password to log i. Default password: admi Cofirm Password: To refill the ew password to cofirm. Click Apply to save the cofiguratio Device Iformatio I Device Iformatio colum, user ca view device basic ifo or chage the workmode. Figure3.16 Device Iformatio Device Model: To view device model ame Device Versio: To view device software & hardware versio Serial Number: To view device serial umber 23 23

24 NVP-903 Series User Maual Workmode: To set the work mode of NVP-903: Ecoder or Decoder Click Apply to save the cofiguratio. Tips: Whe the work mode of VBP-903 is chaged, device will reboot automatically. Ecoder mode ad Decoder mode caot work i the same time. 3.4 OSD Click OSD i mai meu to eter the OSD settig page, as follows: Figure3.17 OSD To use the picture file as OSD durig ecodig, you eed to upload the pg. file to the file list i OSD page. 1) Click Choose File colum to select pg. file i your PC ad click Upload to upload. 2) Click o O SD butto i Advace page to use the pg. file as OSD durig ecodig. Select picture file ame ad set Coordiate X ad Coordiate Y to cofigure the 24 24

25 NVP-903 Series User Maual positio of OSD. (Left frot corer is <0, 0>, OSD move to the right for 1 pixel as Coordiate X add 1, ad move to the bottom for 1 pixel as Coordiate Y add 1) Figure3.18 X/Y-Coordiate 3) To delete picture file i the file list, click Delete. Tips: 1. NVP-903 support uploadig up to 3 picture files. 2. The picture format for OSD should be PNG. 3. The width pixel of the picture should be multiple to The picture size should be ot exceedig the size of ecodig format 3.5 HD Stream Recordig Click Recorder from the mai meu to eter the Recorder settig page: Figure3.19 Recorder Settig Select Chael which you wat to record, click Record to start

26 NVP-903 Series User Maual Figure3.20 Recorder Settig Click Stop to stop recordig. NVP903 supports sigle file recordig up to 3 GB maximum, file that bigger tha 3GB will be saved i a ew TS file. Click Delete to delete uwated stream. Meawhile, the used ad free space of SD card ca be see at the page. Click Remove SD to pull out the SD card from SD card slot. Isert SD card to the computer to watch the recordig stream. 3.6 Help Fuctio Click Help form the mai meu to eter the help iterface to see the device istructios Figure3.21 Recorder Settig 26 26

27 4 Web Cotrol [Decoder Mode] NVP-903 Series User Maual 4.1 Log I NVP-903 supports PC web cotrol via Etheret port, it also supports PC/Smartphoe/Pad wireless web cotrol via NVP-903 iteral hotspot Log i via Etheret 1) Prepare a computer with Etheret port ad Iteret web browser. 2) Coect your PC to the NVP-903 ETH port via Etheret. 3) Cofigure computer IP address, make sure that NVP-903 ad the computer IP are i the same etwork segmet 4) Iput the device IP address i the web browser, it will displays the Log i page, as follows: (Default IP Address: ) Figure4.1 Log i 5) Type i the Accout ad Password to logi. (Default Accout: admi; Default Password: admi) Log i via Wi-Fi 1) Prepare a PC/Pad/Smartphoe with Wi-Fi fuctio ad Iteret web browser. 2) Search Wi-Fi SSID of NVP-903 iteral hotspot(ap) ad coect your PC/Pad/Smartphoe to it. (Default AP Password: ) 3) Iput the device IP address i the web browser, it will displays the Log i page, as i Figure 4.1 4) Type i the Accout ad Password to logi. (Default Accout: admi; Default Password: admi) 27 27

28 NVP-903 Series User Maual Tips: SSID of NVP-903 iteral hotspot (AP) will be displayed i the E-lik of device frot pael Work Mode After log i, click System Settigs i mai meu to eter the system settig page. is chaged. Figure4.2 Work Mode Cofirm Workmode to be Decoder mode. Device will reboot automatically if the work mode 4.2 Cofiguratio Click Cofiguratio i mai meu to eter the basic settig page, as follows: Figure4.3 Cofiguratio I Cofiguratio page, users ca cofigure basic settigs of trasport protocol ad device IP settig. Click Apply to save the cofiguratio

29 NVP-903 Series User Maual Protocol NVP-903 decoder mode support 1 chael STPS over IP decodig with HDMI output. 1) UDP Uicast Figure4.4 UDP Uicast Protocol: Set Protocol to UDP Workmode: Set Workmode to Uicast Port: Trasport port for UDP Uicast trasmissio. Rage: 1024~65535 Eable: Eable stream receivig. ON: Eable the receivig; OFF: Disable the receivig 2) UDP Multicast Figure4.5 UDP Multicast Protocol: Set Protocol to UDP Workmode: Set Workmode to Multicast Target IP: IP address for UDP Multicast trasmissio. Rage: Port: Trasport port for UDP Multicast trasmissio. Rage: 1024~65535 Eable: Eable stream receivig. ON: Eable the receivig; OFF: Disable the receivig 29 29

30 NVP-903 Series User Maual 3) HTTP (TS over HTTP) Figure4.6 HTTP Protocol: Set Protocol to HTTP HTTP: Type i HTTP stream URL that provided by ecoder or streamig server Eable: Eable stream receivig. ON: Eable the receivig; OFF: Disable the receivig 4) R2TP Figure4.7 R2TP Protocol: Set Protocol to R2TP Port: Trasport port for R2TP trasmissio. Rage: 1024~ Please make sure R2TP port of NVP-903 ad target ecoder device to be the same. Eable: Eable stream receivig. ON: Eable the receivig; OFF: Disable the receivig Tips: R2TP is the proprietary trasport protocol of Cato Techology. For R2TP trasmissio, please make sure the ecoder device support R2TP protocol

31 NVP-903 Series User Maual 5) R2TP-S Figure4.8 R2TP-S Protocol: Set Protocol to R2TP-S Port: Trasport port for R2TP-S trasmissio. The R2TP-S port is provided by target R2TP Relay Server IP Address: IP address of target R2TP Relay Server Eable: Eable stream receivig. ON: Eable the receivig; OFF: Disable the receivig Decoder I Decoder colum, user ca set decode buffer size, ad view decode status. Figure4.9 Decoder Buffer Size(MB): Set buffer size for video decodig. Rage: 1~10MB Click Apply to save the cofiguratio Click Decode to restart the decodig Output Format: The format of decoded video 31 31

32 NVP-903 Series User Maual Video Type: Video compress format of iput video source Audio Type: Audio compress format of iput audio source Stream Status: Real-time bit rate of iput IP stream. 4.3 Advace Tools I Tools colum, user ca upgrade or reboot the device, reset device to default settig. Figure4.10 Tools 1) Upgrade System Click Choose the upgrade package to select the upgrade package i PC, ad click Upgrade to upgrade. The upgrade process will eed about 2 miutes, ad device will reboot automatically. 2) Reboot System Click Reboot to reboot the device. The reboot process will eed about 1 miute. 3) Factory Reset Click Factory Reset to recover to the default settigs. The reset process will eed about 2 miutes, ad device will reboot automatically. 4) Pig Use the pig tools to cofirm the coectio status betwee NVP-903 ad target device. Type i the target IP address ad click Pig to get the result

33 NVP-903 Series User Maual Figure4.11 Pig Tips: Please do ot power off the device durig the upgrade or factory reset process. The web page will refresh automatically which meas the process is already fiished ETH Settig I ETH Settig colum, user ca cofigure device IP address. Figure4.12 ETH Settig DHCP: Select IP settig mode. OFF: Maual mode; ON: DHCP mode Etheret MAC: Device MAC address IP Address: Device IP address for video streamig ad web cotrol Sub Mask: Net mask of device IP settig Gateway: Gateway of device IP settig DNS: DNS server of device IP settig Click Apply to save the cofiguratio

34 NVP-903 Series User Maual AP Iformatio I AP Iformatio colum, user ca chage the password of device AP. Figure4.13 AP Iformatio SSID: To view SSID of device AP. SSID of AP is the same as device serial umber. New Password: To set ew password of device AP. Default password: Cofirm Password: To refill the ew password to cofirm. Click Apply to save the cofiguratio Logi Iformatio I Logi Iformatio colum, user ca chage the password for web log i. Figure4.14 Logi Iformatio Userame: To view accout ame to log i. Default: admi New Password: To set ew password to log i. Default password: admi Cofirm Password: To refill the ew password to cofirm. Click Apply to save the cofiguratio Device Iformatio I Device Iformatio colum, user ca view device basic ifo or chage the workmode

35 NVP-903 Series User Maual Figure4.15 Device Iformatio Device Model: To view device model ame Device Versio: To view device software & hardware versio Serial Number: To view device serial umber Workmode: To set the work mode of NVP-903: Ecoder or Decoder Click Apply to save the cofiguratio. Tips: Whe the work mode of NVP-903 is chaged, device will reboot automatically. Ecoder mode ad Decoder mode caot work i the same time

36 5 Techical Specificatios NVP-903 Series User Maual [ENCODER MODE SPEC] CODEC Video Codec H.264 GOP IP/IBBP Profile BaseLie/Mai/High Bitrate Ctrl CBR/VBR Level 1.2/1.3/2.0/2.1/3.0/3.1/3.2/4.0/4.1/4.2 Bitrate HD: 650Kbps-8Mbps Bit Depth 8bit SD: 300Kbps-8Mbps Chroma 4:2:0 Multi-Stream Up to 3 ecodig streams Iput Format 1920x1080p59.94/50/29.97/25 Total Bitrate 20Mbps 1920x1080i59.94/ x720p59.94/50 720x576i50, 720x480i59.94 Audio Codec MPEG-1 Layer 2 AAC-LC HE-AAC V1 Resolutio Up-Scalable & Dow-Scalable Audio Mode Stereo/Dual Moo/Moo OSD PNG File for OSD INPUT & OUTPUT Video Iputs HD-SDI *1, BNC, 75Ω HDMI *1, V1.4a Aalog Video *1, RCA Audio Iputs Video Loop IP Outputs FLV over RTMP PUSH TS over UDP TS over HTTP R2TP (Licese Need) HD-SDI *1, BNC, 75Ω (Embedded) HDMI *1, V1.4a (Embedded) Etheret RJ-45 *1(10/100/1000 BASE-T) Aalog Audio *2, RCA USB USB2.0 *1 HDMI Loop Out SD Card Stadard SD Card Slot*1 PHYSICAL & MANAGEMENT Maagemet Web-UI Cotrol Hotspot Iteral Wireless AP, 2.4GHz Frot Pael E-Ik Ifo Display Iput Voltage DC 12V Dimesios x 44.5 x 153.0mm (W x H x D) Weight 900g [DECODER MODE SPEC] CODEC Video Codec H.264: HP@L4.1/MP@L4.1 MPEG-2: MP@HL Audio Codec MPEG-1 Layer2 MPEG-1 Layer3 MPEG-2 AAC Format 1920x1080p59.94/50/29.97/ x1080i59.94/50/29.97/ x720p59.94/50/29.97/25 720x480i59.94, 720x576i50 INPUT & OUTPUT Video Output HDMI *1, V1.4a IP Iputs TS over UDP Audio Output HDMI *1, V1.4a (Embedded) TS over HTTP R2TP (Licese Need) Etheret RJ-45 *1(10/100/1000 BASE-T) 36 36

37 NVP-903 Series User Maual About Cato Techology: Cato Techology is a leadig maufacturer of advace video ecodig ad Ope Iteret data trasmissio solutios. Reliable Real-Time Trasport Protocol (R2TP) ad Fast Files Trasfer Protocol (F2TP) techologies eable secure, robust ad easy-to-use data trasmissio for the broadcast ad eterprise markets eve i the harshest of etwork coditios. More iformatio is available at