BOUNCE WIRELESS EARPHONES USER MANUAL. kitsound.co.uk

Transcription

1 kitsound.co.uk All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Your product and batteries must be recycled or disposed of properly. Please contact your local recycling centre for more information on proper disposal. BOUNCE WIRELESS EARPHONES JB b / Made in China. KitSound Christchurch, Dorset, BH23 4FL, UK USER MANUAL

2 Please read this manual carefully before use Box contents KS Bounce Wireless Earphones USB charge cable User manual S/M/L earbuds Functions 1. Volume+/Next track 2. Microphone 3. LED indicator 4. Multi-function button (MFB) 5. Volume /Previous track 6. Micro USB charging port

3 Instructions for use Charging the battery 1. Connect the micro USB end of the charging cable to the Micro USB charging port (6) and the standard USB end to a PC USB port or USB mains charger 2. The LED indicator (3) will be red whilst charging, and the LED will turn off when battery is full Note: The first charge may take up to 3 hours to complete. Pairing a wireless device 1. Start by holding the MFB (4) down for 3 seconds. You will see the LED indicator (3) flash blue 3 times and then enter pairing mode 2. Turn on your ios, Android, or Windows device s Bluetooth ON and search for new devices 3. Select KS Bounce from the list of found devices. If asked for a passcode, enter 0000 or 1234 and the earphones will then be connected to your device 4. After pairing successfully, the LED indicator (3) will have a static blue light; you can then answer the phone or listen to your music 4 [continued...] 5

4 [...continued] Pairing a wireless device 5. The next time the earphones are switched on, they will automatically search for and attempt to connect to the last paired device. Note: Bluetooth is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated with or endorsed by Bluetooth SIG Inc. Re-pairing or pairing new devices 1. Make sure the wireless connectivity is turned off on any previously paired devices 2. Follow the Pairing a wireless device instructions from step 1 6 7

5 Functionality Power on Power off To answer a call To end call Hold the MFB button (4) down for 2 seconds Hold the MFB button (4) down for 4 seconds Press the MFB (4) and immediately release Press the MFB (4) and immediately release To reject a call Press and hold the MFB (4) for 2 seconds and then release Voice control When connected with no music playing, press and hold the MFB (4) (not supported by all devices) Redial Volume+ Volume Press the MFB (4) twice quickly to redial your most recent call Press and hold the Volume+/Next track (1) to increase volume Press and hold the Volume /Previous track (5) to decrease volume Previous track Press the Volume /Previous track (5) and immediately release Next track Play/Pause Press the Volume+/Next track (1) and immediately release Press the MFB (4) down and immediately release 8 9

6 Care for your Bounce Please DON T: Get the Bounce wet Drop the Bounce as this will invalidate your warranty Open up the Bounce. There are no user serviceable parts inside Expose the Bounce to extreme temperatures or rapid changes of hot to cold or vice versa Charge the Bounce if the headset/remote has got wet Please DO: Clean the Bounce with a soft dry cloth and no detergents Battery information Your device is powered by a rechargeable battery. Unplug the charger from the electrical plug and the device when not in use If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity Please do not leave the device in hot or cold places, such as in a closed car in summer or winter conditions as it will reduce the capacity and lifetime of the battery Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged 10 11

7 Specifications Wireless connectivity type V4.1 Wireless connectivity up to 10 m distance Frequency response khz Talk time up to 4 hours Play time up to 4 hours Charge time up to 2.5 hours Standby time up to 100 hours Battery type LiPo Battery capacity 55 mah Troubleshooting If you cannot connect the earphones to your device, please try the following: Ensure that the earphones are charged, switched on, paired with and connected to your device Check the earphones are within 10 metres (30 feet) of your device and that there are no obstructions (such as walls or other electronic devices) between the earphones and the device Only one device may be paired to these earphones at a time, so please ensure there are no conflicting wireless devices trying to connect to the earphones 12 [continued...] 13

8 [...continued] Troubleshooting If the earphones will not switch off, they can be reset back to normal by putting them on charge If you receive an intermittent signal, please ensure the earphones are fully charged before continuing use If you do not use the earphones for longer than 3 minutes whilst not connected to a device, they will automatically power off to conserve power We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: support@kitsound.co.uk Hereby, Kondor Ltd declares that the radio equipment type, KSBOU Bounce Wireless Earphones, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 14