Release Notes for Cradlepoint Rev Firmware

Transcription

1 Release Notes for Cradlepoint Rev Firmware Products supported/tested: AER3100/AER3150 AER2100 AER1600/AER1650 IBR1100/IBR1150 IBR600/IBR650 IBR600B/IBR650B Note1: Before upgrading to new firmware, it is always a good idea to save the configuration file from your current version. This firmware version will remove a configuration for version 3.2 or lower and will not try to keep your settings. Modems tested: (new modems / modem platforms are in blue text) Cradlepoint Cellular Devices (Embedded & USB Modems) Cradlepoint AER16x0LPE-AT / AT&T (USA) Cradlepoint AER16x0LPE-GN / T-Mobile, US Cellular (USA); Generic (North America) Cradlepoint AER16x0LPE-SP / Sprint (USA) Cradlepoint AER16x0LPE-VZ / Verizon (USA) Cradlepoint AER16x0LP4 / AT&T, T-Mobile, Verizon (USA) Cradlepoint IBR350L / Verizon (USA) Cradlepoint IBR350LPE-AT / AT&T (USA) Cradlepoint IBR350LPE-GN / T-Mobile (USA); Generic (North America) Cradlepoint IBR350LPE-SP/ Sprint (USA) Cradlepoint IBR350LPE-VZ / Verizon (USA) Cradlepoint IBR350P2 / AT&T (USA); Generic GSM-compatible locations (World) Cradlepoint IBR6x0B-LP4 / AT&T, T-Mobile, Verizon (USA) Cradlepoint IBR6x0LPE-AT / AT&T (USA) Cradlepoint IBR6x0LPE-GN / T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint IBR6x0LPE-SP/ Sprint (USA) Cradlepoint IBR6x0LPE-VZ / Verizon (USA) Cradlepoint IBR6x0LP3-EU / Generic (Europe) 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 1

2 Cradlepoint IBR11x0LPE-AT / AT&T (USA) Cradlepoint IBR11x0LPE-GN / C-Spire, T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint IBR11x0LPE-SP / Sprint (USA) Cradlepoint IBR11x0LPE-VZ / Verizon (USA Cradlepoint IBR11x0LP3-EU / Generic (Europe), Cradlepoint IBR11x0LP6 / AT&T, Sprint, T-Mobile, Verizon (USA); Generic (North America, Europe) Cradlepoint MC400L2 / Public Safety Band 14 only (USA) Cradlepoint MC400LPE-AT / AT&T (USA) Cradlepoint MC400LPE-GN / T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint MC400LPE-SP / Sprint (USA) Cradlepoint MC400LPE-VZ / Verizon (USA) Cradlepoint MC400LP3-EU / Generic (Europe) Cradlepoint MC400LP4 / AT&T, T-Mobile, Verizon (USA) Cradlepoint MC400LP6 / AT&T, Sprint, T-Mobile, Verizon (USA); Generic (North America, Europe) 3 rd Party USB Cellular Modems Franklin U770 ( Sprint Plug-In-Connect Tri-Mode USB Modem ) / Sprint (USA) Huawei E3276 / Telus (Canada) Huawei E368 ( AT&T USBConnect Force 4G ) / AT&T (USA) Netgear AC340U ( AT&T Beam ) / AT&T (USA) Netgear AC341U ( NETGEAR 341U USB Modem ) / Sprint (USA) *supports Netgear firmware and MR2 firmware Novatel 551L LTE ( Verizon USB551L ) / Verizon (USA) Novatel U620L ( Verizon MiFi 4G LTE Global USB Modem U620L ) / Verizon (USA) Novatel U679 ( 4G LTE Novatel Wireless U679 Turbo Stick ) / Bell Mobility (Canada) Pantech UML295VW ( Verizon 4G LTE USB Modem UML2954G LTE ) / Verizon (USA) *requires Pantech firmware version L0295VWD821F.B4 or later Portsmith PSA1U1M ("Portsmith USB Client to Analog Modem Adapter") / POTS phone providers Sierra Wireless 308 USB ( AT&T USBConnect Shockwave ) / AT&T (USA) Sierra Wireless 313U ( AT&T USBConnect Momentum 4G ) / AT&T (USA) Sierra Wireless 320U ( Telstra USB 4G (Sierra AirCard 320U) ) / Telstra (Australia) Sierra Wireless 330U ( 4G LTE Sierra Wireless U330 - Turbo Stick ) / Bell Mobility (Canada) Sierra Wireless 330U ( LTE Rocket Stick Sierra Wireless AirCard 330U ) / Rogers (Canada) 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 2

3 ZTE MF683 ( T-Mobile Rocket 3.0 4G Laptop Stick ) / T-Mobile (USA) Analog Modems Portsmith PSA1U1M ( Portsmith USB Client to Analog Modem Adapter ) / POTS phone providers Portsmith PS6EX1M ("Portsmith ExCard to Analog Modem Adapter ) / POTS phone providers (ExpressCard format, compatible with MBR1400s, MBR1200B, & CBA750B only) New features added in this release (Not all features are in all products see their respective Data Sheets): None. Defect fix only. Defects fixed Replaced an expired certificate that allows Zscaler Internet Security to operate. Release Notes for Cradlepoint Rev Firmware Products supported/tested: AER3100/AER3150 AER2100 AER1600/AER1650 IBR1100/IBR1150 IBR600/IBR650 IBR600B/IBR650B IBR350 CBA850 Note1: Before upgrading to new firmware, it is always a good idea to save the configuration file from your current version. This firmware version will remove a configuration for version 3.2 or lower and will not try to keep your settings W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 3

4 Modems tested (New modems / modem platforms are in blue text) Cradlepoint Cellular Devices (Embedded & USB Modems) Cradlepoint AER16x0LPE-AT / AT&T (USA) Cradlepoint AER16x0LPE-GN / T-Mobile, US Cellular (USA); Generic (North America) Cradlepoint AER16x0LPE-SP / Sprint (USA) Cradlepoint AER16x0LPE-VZ / Verizon (USA) Cradlepoint AER16x0LP4 / AT&T, T-Mobile, Verizon (USA) Cradlepoint IBR350L / Verizon (USA) Cradlepoint IBR350LPE-AT / AT&T (USA) Cradlepoint IBR350LPE-GN / T-Mobile (USA); Generic (North America) Cradlepoint IBR350LPE-SP/ Sprint (USA) Cradlepoint IBR350LPE-VZ / Verizon (USA) Cradlepoint IBR350P2 / AT&T (USA); Generic GSM-compatible locations (World) Cradlepoint IBR6x0B-LP4 / AT&T, T-Mobile, Verizon (USA) Cradlepoint IBR6x0LPE-AT / AT&T (USA) Cradlepoint IBR6x0LPE-GN / T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint IBR6x0LPE-SP/ Sprint (USA) Cradlepoint IBR6x0LPE-VZ / Verizon (USA) Cradlepoint IBR6x0LP3-EU / Generic (Europe) Cradlepoint IBR11x0LPE-AT / AT&T (USA) Cradlepoint IBR11x0LPE-GN / C-Spire, T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint IBR11x0LPE-SP / Sprint (USA) Cradlepoint IBR11x0LPE-VZ / Verizon (USA Cradlepoint IBR11x0LP3-EU / Generic (Europe), Cradlepoint IBR11x0LP6 / AT&T, Sprint, T-Mobile, Verizon (USA); Generic (North America, Europe) Cradlepoint MC400L2 / Public Safety Band 14 only (USA) Cradlepoint MC400LPE-AT / AT&T (USA) Cradlepoint MC400LPE-GN / T-Mobile, US Cellular (USA); Bell Mobility, Rogers, Telus (Canada); Generic (North America) Cradlepoint MC400LPE-SP / Sprint (USA) Cradlepoint MC400LPE-VZ / Verizon (USA) Cradlepoint MC400LP3-EU / Generic (Europe) Cradlepoint MC400LP4 / AT&T, T-Mobile, Verizon (USA) 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 4

5 Cradlepoint MC400LP6 / AT&T, Sprint, T-Mobile, Verizon (USA); Generic (North America, Europe) 3rd Party USB Cellular Modems Franklin U770 ( Sprint Plug-In-Connect Tri-Mode USB Modem ) / Sprint (USA) Huawei E3276 / Telus (Canada) Huawei E368 ( AT&T USBConnect Force 4G ) / AT&T (USA) Netgear AC340U ( AT&T Beam ) / AT&T (USA) Netgear AC341U ( NETGEAR 341U USB Modem ) / Sprint (USA) *supports Netgear firmware and MR2 firmware Novatel 551L LTE ( Verizon USB551L ) / Verizon (USA) Novatel U620L ( Verizon MiFi 4G LTE Global USB Modem U620L ) / Verizon (USA) Novatel U679 ( 4G LTE Novatel Wireless U679 Turbo Stick ) / Bell Mobility (Canada) Pantech UML295VW ( Verizon 4G LTE USB Modem UML2954G LTE ) / Verizon (USA) *requires Pantech firmware version L0295VWD821F.B4 or later Portsmith PSA1U1M ("Portsmith USB Client to Analog Modem Adapter") / POTS phone providers Sierra Wireless 308 USB ( AT&T USBConnect Shockwave ) / AT&T (USA) Sierra Wireless 313U ( AT&T USBConnect Momentum 4G ) / AT&T (USA) Sierra Wireless 320U ( Telstra USB 4G (Sierra AirCard 320U) ) / Telstra (Australia) Sierra Wireless 330U ( 4G LTE Sierra Wireless U330 - Turbo Stick ) / Bell Mobility (Canada) Sierra Wireless 330U ( LTE Rocket Stick Sierra Wireless AirCard 330U ) / Rogers (Canada) ZTE MF683 ( T-Mobile Rocket 3.0 4G Laptop Stick ) / T-Mobile (USA) Analog Modems Portsmith PSA1U1M ( Portsmith USB Client to Analog Modem Adapter ) / POTS phone providers Portsmith PS6EX1M ("Portsmith ExCard to Analog Modem Adapter ) / POTS phone providers (ExpressCard format, compatible with MBR1400s, MBR1200B, & CBA750B only) New features added in this release (Not all features are in all products see their respective Data Sheets) Disable router bounce pages by default Dashboard UI alert and set Attention LED if the user has not changed the default admin or WiFi passwords. (SDK Beta) Updated pyserial to the latest version (SDK Beta) We made a change to the manifest. A new option auto_start was added that 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 5

6 controls whether the SDK application will start upon router boot. If this option does not exist, then the application will not be run. This is a change from behavior and applications that automatically started in will stop working until they get this change. Improved SSH port forwarding Allow routing policies to match on router-generated traffic Respond to NTP requests based on router time without having to forward to WAN 6.1.1, 6.1.2, and features added to multiple products See full release notes for each release below, in general: GPS improvements and WiFi client driver Defect fixes Routing changes, NTP improvements (CBA850) Added QoS support to the product LP4 modem automatic carrier detection and modem image switching support on multiple routers Security defects fixed OpenSSL was upgraded to version 1.0.1t. No issues were known to affect our routers Sanitize strings to mitigate XSRF attacks Limit exposure to XSS attacks When debug logging and TACACS authentication was enabled, the user s password was showing up in log messages Additional UI/Usability changes Networking -> WiFi as WAN menu dropdowns changed from Wireless as WAN to WiFi as WAN Updated Security -> Cloud-Based Security page Add priority to Zone Firewall zone matching Allow the user to upload the HTTPS private certificate Changes to microstatus improve performance for Remote Administration Combine static and policy-based routing. Make the system routing policy and table a special entry in a larger list of policies/tables used for policy routing. Allow drag-drop reordering of the routing policies to control the priorities. Generalize the UI for adding/editing/deleting policies and tables to work for both static and policy-based. Improved the Policy Based Routing UI Sort help results by relevance Administration -> Device Control -> Device Console allows the user to save CLI history Additional Routing Protocol status Make DHCP server s start and end range more informative Added ability to configure IPsec responder only for DMVPN hubs from UI CLI Added the clients command to show currently connected clients and perform actions on them. Support backup RADIUS server for WPA Enterprise in AER products Renamed Web Filter Settings to Upstream Proxy Settings and improved the Network Web Filter 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 6

7 Rules UI Identities MAC and Host Address Add form should use the same entry form as Ports Missing help on RIP Interfaces wizard page AER1600 has b Wireless Mode for 5Ghz Radio Common Name field in local certificate needs to be a required field RIP, add split-horizon poisoned-reverse setting Route map values not getting reset when set action is changed Clean up edit dialog for status route GRE tunnel status is not updated when configured as failover/failback tunnel Added IPsec exclusion policies Clarified some wording on the NHRP page QoS settings for modem download was limited to 75Mbps, that number was increased to 300Mbps. WiFi as WAN or client was increased to 600Mbps. The CLI can be used to increase the QoS upload/download settings if the interface is faster than the UI allows. Dashboard was changed to not display WiFi values if it is disabled PoE status reports voltage with no current for externally powered CBA850 (AER3100) When a PD is plugged into one of the PoE ports, it may be detected as class 6 (0-4 are allowed) VLAN interfaces UI does not display new VLAN added until refresh of browser Zone Definition does not always match against the highest priority Zone Definition rule LAN Config Name in Zone Definition that has the interfaces field left blank should set the field to "Any". When this is saved, the Zone Definition created displays "Incomplete ()" for the interface in the Zone. Added help to Zone Priority RIP authentication should be per interface and not per router AER1600 Support link broken Network scheduler help refers to an interface scheduler Added many EMEA cellular operators to the cellular modem s Auto APN feature Added Verizon to Auto APN feature, as executed when (modem) > SIM/APN/Auth > Access Point Name (APN) is set to Default LP6 (Cat 6) modem. Displays carrier aggregation (LTE-A) diagnostic information when connected LP6 modem, AT&T only. Checkbox now available to disable/enable AT&T Band 30. Enabled by default. Defects fixed Advanced NTP takes a long time to set time after VPN establishes ECM ping results screen showed unexpected behavior when ping host is unreachable MAC address based content filtering allows all clients access Router needed to be rebooted to restore a Zscaler tunnel that disconnected Wired 802.1x authentication doesn t work after reboot while server is remote Responder IPsec VPN traffic leaving wrong interface DHCP Relay didn t work with VRRP Firmware version adds incomplete OSPF Ranges and Virtual Links when upgraded from or SNMP Daemon crashes and restarts when using snmpbulkget and modem OIDs Certificate Signing Request does not list all certificates as options in the Certificate Name 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 7

8 dropdown WiFi issues with LAN scheduler enabled (CBA850) Changing name of VID while the interface is associated with a network When adding Local Networks to Cloud Bases Filtering, Network Address is not showing when saved GRE keepalive using GRE keys failure IBR350 didn t show the correct modem type in its name Standby modem shows Red in microstatus, not Yellow WAN Affinity WAN Binding Type not allowing internal modem for Port type on AER1600 Hotspot Services Redirect URL hidden VLAN, changing name of VID while an interface is associated with a network WAN Affinity causing failure check to not function AER3100 showing 50% CPU utilization on default settings Passthrough reservation field not able to leave blank PPTP unchecked will not allow GRE traffic to pass NHRP shortcut fails when default route is not out WAN Unable to reserve active IPv6 lease via Active Lease Grid Can t enable PMTU discovery for VTI SSH client failed connection gives no feedback from SSH session into router LLDP did not return all neighbors Restore and Upgrade error if Factory Reset option selected Reputation file upload incorrectly reports the wrong number of lines read MAC address filter rules not matching when using uppercase letters Netperf will not run speed test on links in standby state Netperf initial control tree missing OpenVPN Status Exception OpenVPN site-to-site: Missing Forwarding ACCEPT rules Connection Manager fails to disconnect AP completely when disable is selected Default information originate not implemented for RIP RIP md5 auth mismatch not logged DHCP relay: responding dhcp server seeing request coming from original network IPsec always on sometimes chooses wrong WAN interface Network scheduler issues: doesn t respond to timezone change doesn t suspend added BSS ignored Sunday is inverted from UI For dial-up modems, the profile configuration now includes the SIM/APN/Auth menu Known issues Reputation Services (6.0.1). If you upload a reputation file to the router, save the configuration, factory reset, then reload the configuration file any firewall entries referencing that reputation file will fail. The reputation file is not saved in the exported configuration file. If any of the router s WAN connections (Ethernet, Wi-Fi as WAN, modem) connects to a device that has the same IP subnet as the router, the router will disable the interface and provide a 1111 W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 8

9 Bounce Page warning that the WAN interface has a conflict (if bounce pages are enabled). Simply change the LAN IP Address on the Network Settings -> WiFi / Local Network Settings page in the UI. LTE Unless you have a specific service from your carrier, LTE modems will not generally provide an externally-available IP address. Services, such as Remote Management, will not work. Modem Franklin U770. The Modem s Ethernet address conflicts with the default address of the Guest LAN. A warning message is placed in the log and the Guest LAN is disabled. If you change the address of the Guest LAN to a non-conflicting address, this restriction will not occur. Sierra Wireless 313U, 330U. When these modems connect on 2G or 3G bands, specifically on GSM 850, they will sometimes cause interference on the USB bus, resulting in the modem not plugging properly. If this occurs, attaching the modem to a USB extension cable will generally fix the problem. The following USB modems contain an embedded web server through which many modem settings are configured. To access the modem s web pages, you must be logged in as the router administrator. Once logged in, you can then access the modem web pages at these given IP addresses: Franklin U770 / Sprint (USA) -> Netgear AC341U * / Sprint (USA) -> (address is configurable) Pantech UML295VW * Verizon (USA) -> * The modem web pages are available only when the modem is operating in NAT mode W Jefferson Street, Ste. 400, Boise, ID Toll Free: Local: Cradlepoint.com Page: 9