PrimaLuna ProLogue Specs Info

Transcription

1 PrimaLuna Tube Equipment Model ProLogue One Specs PrimaLuna Tube Equipment Model ProLogue Two Specs PrimaLuna Tube Equipment Model ProLogue Three Specs PrimaLuna Tube Equipment Model ProLogue Four Specs PrimaLuna Tube Equipment Model ProLogue Five Specs PrimaLuna Tube Equipment Model ProLogue Six Specs PrimaLuna Tube Equipment Model ProLogue Seven Specs PrimaLuna Tube Equipment Model ProLogue Eight Specs PrimaLuna Tube Equipment Model PhonoLogue Specs PrimaLuna Tube Equipment Accessories Specs Update: September 15, 2008

2 ProLogue One, 35W integrated amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Inputs: 4 x line Outputs: 4 and 8 Ohm PrimaLuna Adaptive Auto Bias Board, with integrated plate fuse for hassle free protection. Low feedback (6dB), low noise wide bandwidth design for maximum detail retrieval, micro contrasts and excellent impulse behaviour and drive power. PrimaLuna designed and matched wideband low loss output transformers with optimized phase characteristics. Prepared for receiving PrimaLuna ProLogue MM-Phono Preamp board. Power: 35 Watts per channel Frequency response: 20Hz 30kHz +/- 0.5dB THD with AABB installed: 0,25% at 1W; less than 1% up to full power S/N ratio: 89dB (unweighted) Input Impedance: 65kOhm Input sensitivity: 225mV Maximum gain: 37,5dB Output impedance choice: 4 and 8 Ohm Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 300W Net Weight: 37.5 lbs / 17 kg Shipping Weight: 41.9 lbs / 19 kg Dimensions: 15.5 x 11 x 7.5 / 395 mm x 280 mm x 190 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1250,- including tax

3 ProLogue Two, 40W integrated amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Inputs: 4 x line Outputs: 4 and 8 Ohm PrimaLuna Adaptive Auto Bias Board, with integrated plate fuse for hassle free protection. Super fast super low noise rectifier circuitry. Highest quality capacitors in signal path and power supply bypass (where it matters most). Low feedback (6dB), low noise wide bandwidth design for maximum detail retrieval, micro contrasts and excellent impulse behaviour and drive power. PrimaLuna designed and matched wideband low loss output transformers with optimized phase characteristics. Prepared for receiving PrimaLuna ProLogue MM-Phono Preamp board. Power: 40 Watts per channel Frequency response: 20Hz 30kHz +/- 0.5dB THD with AABB installed: 0,25% at 1W; less than 1% up to full power S/N ratio: 89dB (unweighted) Input Impedance: 65kOhm Input sensitivity: 240mV Maximum gain: 37,5dB Output impedance choice: 4 and 8 Ohm Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 300W Net Weight: 37.5 lbs / 17 kg Shipping Weight: 41.9 lbs / 19 kg Dimensions: 15.5 x 11 x 7.5 / 395 mm x 280 mm x 190 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1650,- including tax

4 ProLogue Three, stereo fully dual-mono line pre-amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 2 x 5AR4 Inputs: 4 x line Outputs: tape-out + 2 stereo sets RCA single ended Non inverting, no global feedback, extremely low noise wide bandwidth amplifying stages; smooth "Blue Velvet" Alps Potentiometer. Low output impedance without resorting to cathode follower output (Anode Out). Per channel dedicated power transformers & tube rectifiers (5AR4). Triple Pi (π) C-L-C-R-Z-R-C-R filtering with integrated fully passive power supply parallel regulation for each channel. Perfectly decoupled power supply lines with ultra wideband (several MHz) constant source impedance and low corner frequency of over two octaves below the audio bandwidth (4Hz). DC heaters, convenient and smooth delay / muting circuitry. Prepared for receiving ProLogue MM- Phono Preamp board. Gain: 12dB (4x) Frequency response: 4Hz 110kHz +/- 3dB THD: <0,2% at 775mV rms output S/N ratio: >93dB(A) ref 775mV Input Impedance: 100 kω Input sensitivity: 150mV for full output power when coupled to ProLogue Four or Five Power Output impedance: 2800Ohm Power requirement: 115/230V +/-15%, 50/60Hz Power consumption: 46W Net Weight: 23.5 lbs / 10.6 kg Shipping Weight: 27.9 lbs / 12.7 kg Dimensions: 15.5 x 11 x 7.5 / 395 mm x 280 mm x 190 mm (L x W x H) Retail Euro 1525,- including tax

5 ProLogue Four, 35W stereo power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Input: RCA single-ended Outputs: 4 and 8 Ohm New global feedbackless design being an evolution of ProLogue One with novel phase splitter and driver stage implementation. PrimaLuna Adaptive Auto Bias Board with integrated plate fuse for hassle free protection. Low noise, high current driverstage for higher power bandwidth, very low phase distortion and superior impulse behaviour. PrimaLuna designed wideband and matched low loss outputtrans formers with optimized phase characteristics. Power: 35 Watts per channel Frequency response: 20Hz 85kHz +/- 0,2dB at rated power; 4Hz 110kHz 1W THD with AABB installed: <0,1% at 1W; 10W; max 2% at rated power into resistive load S/N ratio: >89dB (unweighted) ref 1W Input Impedance: 100 kohm Input sensivity: 600mV rms input for rated output power Maximum gain: 28x (29dB) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: idle; rated max. power Net Weight: 37.5 lbs / 17 kg Shipping Weight: 41.9 lbs / 19 kg Dimensions: 15.5 x 11 x 7.5 / 395 mm x 280 mm x 190 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1150,- including tax

6 ProLogue Five, 36W stereo power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Input: RCA single-ended Outputs: 4 and 8 Ohm New global feedbackless design being an evolution of ProLogue Two with novel phase splitter and driver stage implementation. PrimaLuna Adaptive Auto Bias Board with integrated plate fuse for hassle free protection. Low noise, high current driverstage for higher power bandwidth, very low phase distortion and superior impulse behaviour. Superfast super low noise rectifier circuitry. Highest quality capacitors in signal path and power supply bypass for maximum detail retrieval and dynamic microcontrasts. PrimaLuna designed and matched wideband low loss output transformers with optimized phase characteristics. Power: 36 Watts per channel Frequency response: 20Hz 85kHz +/- 0,2dB at rated power; 4Hz 110kHz 1W THD with AABB installed: <0,1% at 1W; 10W; max 2% at rated power into resistive load S/N ratio: >89dB (unweighted) ref 1W Input Impedance: 100 kohm Input sensivity: 600mV rms input for rated output power Maximum gain: 28x (29dB) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: idle; rated max. power Net Weight: 37.5 lbs / 17 kg Shipping Weight: 41.9 lbs / 19 kg Dimensions: 15.5 x 11 x 7.5 / 395 mm x 280 mm x 190 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1525,- including tax

7 ProLogue Six, 70W mono power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Input: RCA single-ended Outputs: 2, 4 and 8 Ohm The ProLogue Six shares much of its basic circuitry with the ProLogue Four stereo power amp. The novel phase splitter and driver stage implementation have been adapted for monaural functionality in linearity, distortion, and power delivery. We accomplish this by using an industry unique dual feedback topology: Cross coupled current feedback for superior impulse behaviour and gain stability at any level. We use very small amounts of negative feedback for a more precise gain setting, lower distortion, and lower output impedance. This feedback technology effectively cancels the byproducts of negative feedback, thus creating an amplifier circuit that gives you all the benefits of properly implemented feedback, but without the drawbacks. Newly designed PrimaLuna wide band low loss output transformers designed to handle more difficult speaker loads. A 2 Ohm tap is included in addition to the 4 Ohm & 8 Ohm taps. As with all PrimaLuna amplifiers, the ProLogue Six comes standard with Adaptive Auto Bias, fuse protection, and soft start circuitry for extended tube life. Power: 70 Watts per channel Frequency response: 20Hz 85kHz +/- 1dB at rated power; 11Hz 120kHz 1W THD: <0,1% at 1W 10W; max 1,5% at rated power into resistive load S/N ratio: 101dB (unweighted) ref full power Input Impedance: 100 kohm Input sensivity: 911mV rms input for rated output power Power consumption: idle; rated max. power Net Weight (each): 37.5 lbs / 17 kg Shipping Weight (each): 41.9 lbs / 19 kg Dimensions: (inches): 15.5 x 11 x 7.5 (mm): 395 x 280 x 190 (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1050,- including tax

8 ProLogue Seven, 70W mono power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Input: RCA single-ended Outputs: 2, 4 and 8 Ohm The ProLogue Seven shares much of its basic circuitry with the ProLogue Five stereo power amp. The novel phase splitter and driver stage implementation have been adapted for monaural functionality in linearity, distortion, and power delivery. We accomplish this by using an industry unique dual feedback topology: Cross coupled current feedback for superior impulse behaviour and gain stability at any level. We use very small amounts of negative feedback for a more precise gain setting, lower distortion, and lower output impedance. This feedback technology effectively cancels the byproducts of negative feedback, thus creating an amplifier circuit that gives you all the benefits of properly implemented feedback, but without the drawbacks. Newly designed PrimaLuna wide band low loss output transformers designed to handle more difficult speaker loads. A 2 Ohm tap is included in addition to the 4 Ohm & 8 Ohm taps. As with all PrimaLuna amplifiers, the ProLogue Seven comes standard with Adaptive Auto Bias, fuse protection, and soft start circuitry for extended tube life. As with the ProLogue Five, the ProLogue Seven also includes upgraded Solen capacitors, and fast recovery diodes in the power supply for the ultimate in detail and dynamics. Power: 70 Watts per channel Frequency response: 20Hz 85kHz +/- 1dB at rated power; 11Hz 120kHz 1W THD: <0,1% at 1W - 1,5% at rated power into resistive load S/N ratio: 101dB (unweighted) ref full power Input Impedance: 100 kohm Input sensivity: 911mV rms input for rated output power Power consumption: idle; rated max. power Net Weight (each): 37.5 lbs / 17 kg Shipping Weight (each): 41.9 lbs / 19 kg Dimensions: (inches): 15.5 x 11 x 7.5 (mm): 395 x 280 x 190 (L x W x H) Retail inclusive Adaptive Auto Bias Board Euro 1400,- including tax

9 ProLogue Eight, tube cd-player Combines the most advanced digital technologies with the best of analog: upsampling to192khz and matching DACs by Burr Brown s top of the line chips, ultra low distortion DAC buffers, transformer coupled to a Dual Mono tube stage which is directly inspired by our revered ProLogue Three preamplifier. Dual Mono audio stages incorporating 12AX7 and 12AU7 tubes, and a 5AR4 tube rectifier for each channel, polypropylene coupling caps, triple pi power supply filtering with shunt regulation for superior noise suppression and detail retrieval, and again, as you would expect from PrimaLuna, another World Première: the first CD player with its own dedicated SuperTubeClock... all optimized for just one goal: extracting maximum sound quality from your CD s. Outputlevel: 2V±0.5dB Frequency Response: 20Hz - 20kHz +/- 0.5dB Distortion And Noise: below -96dB Dynamic Range: >120dB Channel Separation: 90dB (1kHz) Digital Output: coaxial S/PDIF and Toslink optical Power requirement: 115/230V +/-15%, 50/60Hz Power Consumption: 50W Net Weight: 25.4 lbs / 11.5 kg Shipping Weight: 30.0 lbs / 13.6 kg Dimensions: 15.5" x 11" x 7.5" / 395 mm x 280 mm x 190 mm (L x W x H) Shipping Dimensions: 18.3" x 15" x 12" / 465 mm x 380 mm x 305 mm (L x W x H) Retail inclusive heavy metal remotecontrol Euro 2250,- including tax

10 PrimaLuna ProLogue Export Info Sonic Nirvana somtimes comes from gentle nudges... At PrimaLuna, we have the experience to know that there is no product that is perfect for everybody. That s why we have our exclusive Adaptive AutoBias that allows the customer to finetune the sound of any PrimaLuna amp by changing to a HUGE number of different tubes, with absolutely no need for the tubes to be matched, or biasing once you put them in. Getting that last 10% of performance does not have to mean spending five or ten thousand dollars of upgrades. It can be a matter of a gentle nudge or a small tweek that can lead to sonic bliss and the feeling of Ahhhh.this is right. The PrimaLuna ProLogue Eight CD player already hit the home run. With reviews from around the world and statements like Indeed their latest ProLogue Eight "hybrid" CD player drops a real bombshell on the traditional CD player competition. You can see it is something special. But every person and every system is different. With 99% of the CD players on the market you are stuck with what you bought. Not so with PrimaLuna. One, in a way you would expect from us, that is changing out a couple tubes and taking advantage of a huge color pallet available to you. The other, a way not seen in any other CD player available anywhere. Simply turn the CD player over, remove the bottom, and pop out four chips, then plug in one of our special Super I/V op-amp kits. The Super I/V Board incorporates a new type of op-amp that to our knowledge, has never been used by any audio manufacturer before (as far as we know). For Euro 100,- you are going to get: Slew-rate upgrade from 13 to 100V/uS 50% noise reduction Bandwidth upgrade of a factor 10! The Super I/V Board Plus for Euro 150,- (pictured below) also installs bypass caps and power supply caps, so with the increase of speed, detail, and quietness you get above, you'll also get a prettier picture. Model Super I/V Board Super I/V Board Plus Retail Euro 100,- including tax Euro 150,- including tax

11 ProLogue Phono, MM phono preamplifier with RIAA correction Tubes: none MM phono preamplifier with RIAA correction for mounting in ProLogue One/Two and ProLogue Three models. The boards are the same, but additional parts for connection differ slightly. Requires no extra plugs or connectors, fits on existing RCA's of any input. Superior sound quality on a tiny footprint. Fully Surface Mount Technology implementation for shortest signal paths as well as minimum parasitic capacitances and inductances. Excellent parts throughout, selected on sound quality as first priority: miniature film capacitors, minimelf resistors, superior opamp for highest accuracy, lowest noise, highest speed and most robust drive capabilities into the RIAA correction stage, resulting in a very detailed, open and lifelike sound from any LP record. Low impedance electrolytics, super lownoise powersupply. Dimensions: small as a big stamp! Input Impedance: 50kOhm Gain: 42dB (127x) Frequency Response: 10Hz - 50kHz RIAA accuracy: <0,5dB 20Hz - 20kHz Overload Margin: >20dB rel 5mV Harmonic Distortion & noise: -83dB Size: 3,2 x 3,8 cm (1.26 x 1.5 ) Retail Euro 150,- including tax

12 Accessories Retail Adaptive AutoBias Board for (older) PL-One Retail Adaptive AutoBias Board for (older) PL-Two Retail G/S front for PL One, Two Three incl. 2 knobs Retail G/S front for PL Four, Five, Six, Seven Euro 100,- including tax Euro 125,- including tax Euro 150,- including tax Euro 100,- including tax Retail of following accessories available from local distributor: PrimaLuna branded EL-34CH tube PrimaLuna branded KT-88CH tube PrimaLuna branded 12AU7CH tube PrimaLuna branded 12AX7CH tube PrimaLuna branded 5AR4CH tube ProLogue One Tube Set Complete ProLogue Two Tube Set Complete ProLogue Three Tube Set Complete ProLogue Four Tube Set Complete ProLogue Five Tube Set Complete ProLogue Six Tube Set Complete (per pair) ProLogue Seven Tube Set Complete (per pair) PrimaLuna White Gloves per pair