Explo Zündtechnik. RX-MP3 Player Instruction Manual. Zündtechnik

Size: px

Start display at page:

Download "Explo Zündtechnik. RX-MP3 Player Instruction Manual. Zündtechnik"

Eileen Walters
6 years ago
Views:

1 Explo Zündtechnik RX-MP3 Player Explo Zündtechnik Harald Kulterer Völkermarkterstrasse 240 A-9020 Klagenfurt Tel: +43 (0) 463 / Fax: +43 (0) 463 / Mobil: +43 (0) 664 / office@explo.at

2 Directory 1 Abstract Buttons Audio Files Menu Menu structure Delay Ch Settings Main Box Ch-Controll Ch-Track Repeat Sys Settings Sys Addr Secure Key Restore Default Player Version Coding MP Special functions FSK- Modus Specifications General Information Player Important

3 1 Abstract The console is used to play MP3 sound files and can be controlled with radio. Only MP3 files can be processed (there are no hearable differences to a WAV-file because of the 320kbps coding). A CF-memory card is used as a data carrier. 1.1 Buttons Test LEDs Stop On / Off Antenna Play / Pause Forward / Rewind Charge 12V Audio Out 1.2 Audio Files 128 audio files can be used by the MP3-Player. The name of the first audio file wanting to be played has to start with 001, the following naming after the 001 does not matter. The second file s name has to start with 002, the third with 003 and so on. When channel 1 / box 50 is going to be ignited, track 001 is going to start to play, when channel 2 is going to be ignited, track 2 is going to start to play The first 60 sound files can be played directly. The rest of the sound files are only over the Skip Forward function accessible. 3

4 2 Menu The menu can be accessed by holding the STOP key and pressing the PLAY key. Keys used for the menu: Play OK, confirm Stop ESC, back << Minus >> Plus 2.1 Menu structure Menu Delay m Ch Settings Main Box 1-50 / all Ch-Controll Ch-Track Repeat OFF/ALL Sys Settings Sys Addr Secure Key 0-99 Restore Default Player Version 4

5 2.2 Delay A sound delay (starting delay) can be adjusted. The adjustment shall be conducted in meter. The delayed time will be displayed in ms. 2.3 Ch Settings The channels can be programmed as desired Main Box This box setting is used, when the box setting main is used in the submenus Ch- Controll and Ch-Track (standard: box 50) Ch-Controll Here the settings like Play, Pause Stop, can be modified. Basic settings: Play/Pause Ch 61 Stop Ch 62 Skip << Ch 63 Skip >> Ch 64 Reset Ch 65 Start Soon Ch 66 Reset: The MP3-Player stopps playing and sets the track number back to 001. Start Soon: The timer is going to be started and showed on the display (information for the sound engineer) Ch-Track The settings for a direct start of the sound files can be made here. 2.4 Repeat If this function is used, the next sound file is going to be played automatically after finishing the one playing at the time. After the last one is played, the first one is going to be played automatically. 2.5 Sys Settings Sys Addr The system address can be adjusted in this submenu Secure Key A radio coding can be set. All used devices have to be attuned to the same Secure Key. 5

6 2.6 Restore Default Here the settings are going to be set back, except the Secure Key. 2.7 Player Version The player s firmware is shown. An outdated firmware can be upgraded. 3 Coding MP3 For the coding of the MP3 files a LAME encoder with 320kbps is recommended. The player can work up all bit rates. A bit rate under 128kpbs is NOT recommended because of the hearable bad audio quality. 4 Special functions 4.1 FSK- Modus When the TX-70K / TX-1400K is determined in FSK-armed state, the RX-MP3 can be started with the Z button on the TX-70K / TX-1400K. To pause the music, a second push on the Z button is necessary. With holding the - button and a push on the Z button the music is going to stop. When that key combination is used again, the RX- MP3-Player resets and the first track is going to be played, when the PLAY-button is pushed. 5 Specifications 5.1 General Information Measurements: 220 x 155 x 67mm Weight: 1,9kg Operation time: 10h Stand-by: 16h Temperature range: -20 C to +65 C (protect from direct insolation!) Coverage: 800m 5.2 Player Outputs: 2x Cinch, 1x 3,5mm phone jack Output level: 1,8Vpp Distortion factor: 0,1% S/N ratio: 87dB Channel Offset: 70dB 6

7 6 Important PLEASE NOTE: DO NOT copy two or more files starting with the same track number on the CF card! The MP3 Player CAN NOT receive radio signals while operating in the menu! Most audio mixers do not have cinch outputs! To connect the RX-MP3-Player with a mixer, you need an adaptor cable (cinch to XLR or cinch to 6.5 phone jack). DO NOT place the MP3-Player nearer than 1 meter next to a computer, a radio microphone or any other transmitter because it affects the reception. Make a sound check in time before the show to assure that everything is working correctly! This document is also Safety- and Health Document. 7

FIRESTORM AP1 AUDIO PLAYER USER GUIDE

FIRESTORM AP1 AUDIO PLAYER USER GUIDE Introduction The FireStorm AP1 Audio Player is an Audio Player for the FireStorm Firing System. The Audio Player allows you to easily play a music track in perfect