The high Force at the End of Stroke, just where it is important
|
|
- Shannon Arnold
- 5 years ago
- Views:
Transcription
1 SCHMIDT Toggle Presses The high Force at the End of Stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at end of stroke (see diagramm below) Honed bores and ground rams provide a long service life and a precise guidance / Stroke before plug-in position of the toggle () ,12 1, ,35 1,8 2,25 2,7 3,15 3,6 1 = No. 13 Force at the hand lever 2 N / 45 lbs 2 = No. 13 Force at the hand lever 12 N / 27 lbs Stroke before plug-in position of the toggle () 1 = No. 17 Force at the hand lever 2 N / 45 lbs 2 = No. 17 Force at the hand lever 12 N / 27 lbs 3 = No. 11, 14, 15, 16 Force at the hand lever 2 N / 45 lbs 4 = No. 11, 14, 15, 16 Force at the hand lever 12 N / 27 lbs Note: Maximum force will be reached just before extended position 8 SCHMIDT Presses
2 From 5 kn to 15 kn / 1,125 lbs. to 3,37 lbs. Press head type 13 13F F R 13RF 13R RF F F R 11RF 11R RF F 11R F R 15RF 11R RF F F R 14RF 11R RF F F R 16RF 11R RF - 5 Nominal force lbs 1,125 1,125 2,7 2,7 2,7 2,7 2,7 2,7 2,7 2,7 3,37 Working stroke A Throat depth C Press head height S F F - 2 Ram bore Ø mm 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 Hand lever left Angle of rotation Max. weight upper tool* Return stroke lock 1) lbs 3 / 8 3 / 7 3 / 8 3 / / / / 9 2 / / / / / / 11 3 / / 11 Locked position 1 bef. BDC Locked position 2 bef. BDC Disengaging accuracy Working height F Frame No. 13 Frame No. 3 Frame No. 2 Frame No / / / Frame No Weight approx. lbs Accessories Mechanical counter Throat depth frame (total depth) 4.37, 5.15 Additional fixture mounting plate suitable for throat depth frame 13 13F 13R 13RF 11 11F 11R 11RF Block clamping piece Frame Overview Frame Height M () Table Size B x T () 15 15F 15R 15RF Table Bore Ø (mm) 14 14F 14R 14RF 16 16F Table Height K () 16R 16RF 17 17F Mounting Surface B x L () Nr x H x 7.28 Nr. 3 11, 14, x 4.3 2H7 5.9 x 1.23 Nr. 2 15, x 4.3 2H x 11.2 Nr , 14, 15, 16, x H x Nr , 14, 15, 16, x H x Options Standard with no additional charge Additional charges apply 1) Adjustment of locking position on request * The weight was determined with hand lever position 45 forward (guidelines) S 1.18" M 8.39" Other available Options Nickel plated - Cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated Custom Paint - Press and column can be painted to customer s color specification Bores for Adapting Tooling - Customer specific sizes can be supplied L B M C B x T Ø 2H7 Please consult our Sales Department or Representative. Detailed dimensional drawings can be downloaded: A F K Ø 1H7 No. 113, 13: Ø 25 mm No. 11, 14-17: Ø 32 mm.354 ±.8 9 1H Simply the best! 9
3 SCHMIDT Toggle Presses with Horizontal Pull The high Force at the End of Stroke, just where it is important Do you need a high force at the end of stroke for material-transforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at end of stroke (see diagramm below) Honed bores and ground rams provide a long service life and a precise guidance Ergonomic Press with horizontal Pull With press No. 113 and No. 111 the manual force is applied by pulling the lever towards the body. This press is especially suitable for rapid production at small forces Stroke before plug-in position of the toggle () = No. 113 Force at the hand lever 12 N / 27 lbs 2 = No. 113 Force at the hand lever 5 N / 11 lbs Stroke before plug-in position of the toggle () , ,35 1,8 2,25 2,7 3,15 3,6 1 = No. 111 Force at the hand lever 2 N / 45 lbs 2 = No. 111 Force at the hand lever 12 N / 27 lbs Note: Maximum force will be reached just before extended position 1 SCHMIDT Presses
4 From 2.5 kn to 12 kn / 56 lbs. to 2,7 lbs. Press head type F F 113R 113RF 113R 113RF F F R 111RF 111R RF - 5 Nominal force lbs ,7 2,7 Working stroke A Throat depth C Press head height S Ram bore Ø mm 1H7 1H7 1H7 1H7 Hand lever left Angle of rotation Max. weight upper tool* lbs 2 / 7 1 / 7 Return stroke lock 1) Locked position Locked position Disengaging accuracy.1.2 Working height F Frame No. 13 Frame No. 3 Frame No. 2 Frame No. 2-6 Frame No / 6 1 / / - 7 / / - 7 / Weight approx. lbs Accessories Mechanical counter Throat depth frame (total depth) 4.37, 5.15 Frame Overview F Additional fixture mounting plate suitable for throat depth frame Block clamping piece 2) Frame Height M () Table Size B x T () Table Bore Ø (mm) Table Height K () Mounting Surface B x L () No x H x 7.28 No x H7 5.9 x 1.23 No x H x 11.2 No x H x No x H x R 113RF F 111R 111RF Options Standard with no additional charge Additional charges apply 1) Adjustment of locking position on request 2) Stroke reduction about.39 by version with 1.18" M 8.39" additional charge * The weight was determined with hand lever position 45 forward (guidelines) Other available Options Nickel plated - Cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated Custom Paint - Press and column can be painted to customer s color specification Bores for Adapting Tooling - Customer specific sizes L B M B x T Ø 2H7 K F S A Ø 1H7 No. 113: Ø.98" No. 111: Ø 1.25" ±.8 9 1H Simply the best! 11
5 SCHMIDT Toggle Presses with Square Ram Optimum Guidance and Anti-Rotation Do you need a high force at the end of stroke for material-transforming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at end of stroke Square ram is anti-rotational (no die sets required) Precise adjustment of the press depth via hardened lower stop Fully adjustable, play-free teflon-lined gibs 11 V 13 V 14 V 15 V 16 V 19 V Stroke before plug-in position of the toggle () ,35 1,8 2,25 2,7 3,15 3, ,35 1,8 2,25 2,7 3,15 3,6 4,5 4,5 1 = No. 11, 14, 15, 16 Force at the hand lever 2 N / 45 lbs 2 = No. 11, 14, 15, 16 Force at the hand lever 12 N / 27 lbs No. 13 see on page 8 Stroke before plug-in position of the toggle () = No. 19 Force at the hand lever 2 N / 45 lbs 2 = No. 19 Force at the hand lever 12 N / 27 lbs Note: Maximum force will be reached just before extended position 12 SCHMIDT Presses
6 From 5 kn to 22 kn / 1,125 lbs. to 4,95 lbs. Press head type 13 V 13 VF 13V-4 13VF-4 13 VR 13 VRF 13VR-4 13VRF-4 11 V 11 VF 11V-45 11VF V 15 VF 11V-45 11VF VR 11 VRF 11VR-45 11VRF VR 15 VRF 11VR-45 11VF V 14 VF 11V-6 11VF-6 16 V 16 VF 11V-6 11VF-6 14 VR 14 VRF 11VR-6 11VRF-6 16 VR 16 VRF 11VR-6 11VRF-6 19 V 19 VF 19 VR 19 VRF 19V-4 1) 19VR-4 1) Nominal force lbs. 1,125 1,125 2,7 2,7 2,7 2,7 2,7 2,7 2,7 2,7 4,95 4, Working stroke A Throat depth C Press head height S Ram bore Ø mm 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 1H7 2H7 2H7 Hand lever left Angle of rotation Max. weight 3 / 9 3 / 9 16 / 9 16 / 9 16 / 9 16 / 9 2 / 8 2 / 8 2 / 8 2 / /- 4.5 /- lbs upper tool* 4.5 / / / / / / 11 2 / 8 2 / 8 2 / 8 2 / 8 4.5/ /- Return stroke lock 3) Locked position 1 bef. BDC Locked position 2 bef. BDC Disengaging accuracy Working height F Frame No Frame No Frame No Frame No Frame No Frame No Frame No Frame No Weight approx. lbs Accessories Mechanical counter Throat depth frame 4.37, 5.15 Throat depth frame 5.94 Additional fixture mounting plate suitable for throat depth frame 13 V 13 VF 13 VR 13 VRF 11 V 11 VF 15 V 15 VF 11 VR 11 VRF 15 VR 15 VRF 14 V 14 VF 16 V 16 VF 14 VR 14 VRF 16 VR 16 VRF 19 V 19 VF 19 VR 19 VRF 2) 2) Frame Overview Frame Height M () Table Size B x T () Table Bore D Ø (mm) Table Height K () Mounting Surface B x L () No x H x 3.34 No. 3 11, x H7 5.9 x 1.23 No. 2 15, x H x 11.2 No , x H x No , x H x No x H x No x H x No x H x Options Standard with no additional charge Additional charges apply 1) Special strokes.47 and on request 2) Fixture mounting plate is already existing in the frame S 3) Adjustment of locking position on request * The weight was determined with hand lever position 45 forward (guidelines) M A F K L B C B x T ±.8 9 1H9 Ø D Simply the best! 13
SCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationPRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationVariable Stroke Straight-Line Action
4. FO Series FL Series G Series Type of Mounting: Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and (two-handed operation) Type of Mounting: Type of Actuation: Locking
More informationNEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More information2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT B1 1695 2200 0 10 set by hand or by optional RCU (Remote Control Unit) X 65 2-Port Antenna 1695 2200 65 18dBi 0 10 T Type No. 742215V01
More informationTHE MODULAR TECHNOLOGY MOUNTING SOLUTION.
THE MODULAR TECHNOLOGY MOUNTING SOLUTION. RESPONSIBLE DESIGN. The SYSTEMA range is designed to minimize its impact on the environment As such the range has been "Designed for Disassembly (DFD)" and manufactured
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationTDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit
TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart
More informationAuxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More informationLoader Directional Control Valve
Engineering & Manufacturing Solutions Specifications: 10 gpm (38 lpm) Nominal Capacity Rated up to 4000 psi (275 bar) Port Sizes: - Inlet/Outlet #8 SAE - Work Ports #6 or #8 SAE Weighs 10.9 lbs. (4.9 kg)
More informationMiniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
More informationHD NO HOLES MOUNT RAM SSV
HD NO HOLES MOUNT 2015-2019 RAM SSV 425-5107 Remove the two trim covers to access the front OEM bolts of the passenger seat. Remove the front bolts using a 15mm socket. Align the base to the holes, snug
More informationCOBRA-1 Monitor Supports Single Screen. COBRA-1 & COBRA-1HD series
Cable Management Weight Gauge Height Adjustable COBRA-1 Monitor Supports Single Screen The COBRA-1 light duty & COBRA-1HD heavy duty monitor arms are designed with elegant styling, smooth operation, unmatched
More informationRobust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
More informationWIDE-DISPERSION SPEAKER SYSTEM F-1000/F-2000 SERIES
WIDE-DISPERSION SPEAKER SYSTEM F-1/F-2 SERIES F-1B/BT/BTWP F-1W/WT/WTWP F-2B/BT/BTWP Without Horn Adapter (11 1-deg Octagon Horn) Horizontal 11 F-2W/WT/WTWP With Horn Adapter (8 8-deg Octagon Horn) Horizontal
More informationSHELVING 45 AND TYRE RACKS
AND TYRE RACKS AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationElectric Press Work Station Product Line
Electric Press Work Station Product Line 2 Fully Electric Work Stations The Work Station is a stand-alone unit with a Promess precision servo driven ball screw press (EMAP) and motion controller. The system
More information1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 7300C Series: Single Head Die Bonders, Manual X-Y-Z Last revised: 09/19/18 - microscope Series Overview Application
More informationWayside Signaling Systems Products
Wayside Signaling Systems Products Housing and Lighting Modules B43 - B44 Visors B45 Snowshields B46 Backgrounds B47 Accessories B48 - B49 Mounting Brackets B50 B-E Copyright 2018 s Industry Inc. SIE-RA-CMP-001-18-EN
More information1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
More informationManual Clamps for Automotive Prototype Production
Manual Clamp interchangeable with 82M-6 This newest version provides more clamp arm variations and in addition two hold open devices. Opening angle can be reduced now. Page 15.2 New products 15.0 Notes
More informationGRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationWayside Signaling Systems Products
Wayside Signaling Systems Products Housing and Lighting Modules B44 Visors B45 Snowshields B46 Backgrounds B47 Accessories B48 - B49 Mounting Brackets B50 B-E Copyright 2017 s Industry Inc. SIE-RA-CMP-001-17-EN
More informationSECTION 6. COMPUTER ACCESSORIES
SECTION 6. COMPUTER ACCESSORIES CPU HOLDER...6.2 FLAT SCREEN ARMS...6.3 FLAT SCREEN ARM WITH POST...6.4 SLATWALL / BIN RAIL...6.5 FLATSCREEN ARM FOR SLATWALL / BIN RAIL...6.5 FLAT SCREEN KEYBOARD PLATFORM...6.6
More information3D-Welding Table Systems
3D-Welding Table Systems www.tempus-holding.de Contents 3D-Welding Table Systems SST-Fix Series & SSTW-Fix Series 2 SST-Flex Series & SSTW-Flex Series 4 SST Accessory Kits 6 Assembly Tables SMT-Fix Series
More informationProduct Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
More informationFrontslide 60/A-Telescopic
Frontslide 60/A-Telescopic Patents A lot of motion with a single slide. Hardware for simultaneously sliding up to 4 wood, metal or aluminium shutters of up to 60 kg (132 lbs.). Guides pages Seite 32 Locking
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationSit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
More informationDisplay Station Series
Carts & Stands a collection of carts and stands designed for a clean, aestheticallypleasing installation and shipped with an integrated power strip features: Designed for professionally-finished installations
More informationMeasuring range X / Y mm 100 / / /170 Z travel mm 200 / 400** Max. table load kg 20
- 10 MarVision. Optical Measuring Instruments Workshop Measuring Microscope MarVision MM 220 Applications For measuring distances (QC 100); bore holes and angles and determination of geometric elements
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationPCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum
PCB Keyswitches Page RACON short-travel keyswitches - 5 RACON 8-6 RACON 12-10 RACON 12 V with vertical adapter - 1 RACON 12 i - 16 RACON special accessories - 20 RF short-travel keyswitches - 23 RF 15
More informationXSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value
XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products
More informationPlease check our web site for the most up-to-date information.
Vibration Isolation Platform A Vibration Isolation Platform (VIP or Platform) cuts off the transmission of vibrations from the tabletop or counter top into a precision instrument or piece of equipment
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationCombi range. Professional lighting equipment for general purpose stages. professional lighting for the performing arts
Combi range Professional lighting equipment for general purpose stages professional lighting for the performing arts General features Combi range Ventilation slots on the rear housing for efficient cooling
More informationWorkholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
More informationFixture Options: Ordered Separately from Fixture. See pages 2-3. Mounting Options: Ordered Separately from Fixture. See pages 4-6
Catalog number: / Mode Finish Options: See pages 2-3 ing Options: See pages 4-6 Approvals: Date: Page: 1 of 6 Specifications Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel:
More informationto alter products designs s, dimensions or info to im mprove
the products quality.headquarters, with express exclusion of any other court. Matrix Evo the products quality.headquarters, with express exclusion of any other court. Matrix Evo Matrix Evo is a key-cutting
More informationTechnical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
More informationPANELITE ENCLOSURE LIGHTS OVERVIEW
SPEC-00581 H763.422.2211 763.422.2600 ELECTRICAL LIGHTING PACKAGES ELECTRICAL LIGHTING PACKAGES PANELITE ENCLOSURE LIGHTS OVERVIEW FEATURES Slim profile allows light to be tucked up out of the way for
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationGrass TEC. Face Frame Hinge System. for CABINETRY. tec. The star in your cabinet
Grass TEC Face Frame Hinge System for tec The star in your cabinet Grass TEC Technical Features How to Specify TEC Hinges There are numerous variables that will determine the choice of hinge. Determine
More informationCOBRA-1 Monitor Supports. COBRA-1 & COBRA-1HD series (Power Base) Single Screen Power Base
Cable Management Weight Gauge Power Base COBRA-1-POW-SIL-D COBRA-1 Monitor Supports Single Screen Power Base The COBRA-1 light duty & COBRA-1HD heavy duty monitor arms with power base are designed with
More informationEXTENDED PIVOT ARM FOR UP TO 12 KG/ 26.5 LBS
EXTENDED PIVOT ARM FOR UP TO 12 KG/ 26.5 LBS Notebook tray Colours to choose Max. load capacity support arm Max. load tray Product weight Part number 360 x 280 mm/ 4.2 x 11 decorative parts: RAL 5013 blue
More informationDESK MOUNT CATALOGUE SHOP AT DURONIC.COM
DESK MOUNT CATALOGUE 2016 SHOP AT DURONIC.COM 1 INFORMATION At Duronic, we have an extensive list of Monitor Arms which cater for different individual preferences. The Monitor Arms are ergonomically designed
More informationNEW CAPTIS-M COLLET CHUCK. The manually operated collet chuck for rotating and stationary use
NEW CAPTIS-M COLLET CHUCK The manually operated collet chuck for rotating and stationary use CAPTIS-M COLLET CHUCK The modularly designed CAPTIS clamping system gets a new family member: the CAPTIS-M collet
More informationKM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
More informationby Atdec Phone: Web:
by Atdec Phone: +1 888 303 4252 Email: customercare@atdec.com Web: www.atdec.com Atdec mounts are designed, developed and tested in Australia. We manufacture an extensive range of products for a variety
More informationTRADUR. Supporting elements. Balance. Supporting elements
TRADUR Balance columns have been ignored by designers for much too long. Only through new thinking in complex design contexts can contemporary design language come into its own both above and below the
More informationADJUSTMENT & ALIGNMENT Easy Vertical Modifications. DYNAMIC DISPLAYS Multi-Tier & Multi-Screen
Ag Arm is a sophisticated and stylish display mounting system for LCD monitors up to 30. Designed for integration atop all Innovant furniture products, Ag Arm can also be intelligently specified to prevent
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationMOUNTING REFERENCE GUIDE
MOUNTING REFERENCE GUIDE VESA 75/ 100 ADAPTATION CIM Cable Integrated Mounting System CONTENT General notes How to create part numbers Product highlights Flush mount Support arm pivot Extended pivot arm
More informationIndustrial Shock Absorbers
EA to EA3 Enertrols rugged EA and EA 3 Series heavy industrial adjustable shock absorbers are available to handle your most demanding linear deceleration applications. Energy capacity ratings are high
More informationSit-to-Stand Workstation
Sit-to-Stand Workstation Product ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
More informationTube Clamp Adapters. 1 Prosthetics. 1.2 Modular Adapters. with 10 inclination for Ø 30 mm tube
. Modular Adapters Tube Clamp Adapters A Tube Clamp Adapter. Functional Adapters 0. Prosthetic Knee Joints A-Al 69 g 0 0 000 A-St g 0 0 000 A-Ti 69 g 0 0 000 6 g 00 000 8 g 00 0 000.5 Hip Joints The A
More informationEXTENDED HEIGHT ADJUSTABLE ARM
EXTENDED HEIGHT ADJUSTABLE ARM Monitor adaption Height adjustment Colours to choose Max. load capacity support arm Max. load monitor adaptation Product weight Balancing range Part number VESA 75/ 100 slow-flowing
More informationAvailable Beam Angles 8, 15, 30, 45, 40 x 9, 60 x 20 Shielding and Glare Control. EasyGlow TM glare reduction technology
FEATURES The LS9142 is a powerful LED fixture with exceptional light output. Available in a wide variety of optical configurations including narrow spot and bi-symetrical distributions, the LS9142 is a
More informationTH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
More informationQUIK-LOK S LINE OF WALL-MOUNTING SYSTEMS FOR LCD/PLASMA TV s & PROJECTORS
QUIK-LOK S LINE OF WALL-MOUNTING SYSTEMS FOR LCD/PLASMA TV s & PROJECTORS Quik-Lok offers a full line of wall mounts for flat-panel LCD/Plasma TV s and monitors, for high standard audio/video integration,
More informationRotary Microtomes. Tissue Processors. Embedding Centers. Microtomes. Cryostats. Water Bath & Slide Warmer. Staining Systems.
Rotary Microtomes All SLEE microtomes are produced at the company s seat in Mainz, Germany. The highly precise, modularly built rotary microtomes range from a manual unit, type CUT 4062, via the semi-automatic
More informationSUPPORT ARM PIVOT. Monitor adaption Colours to choose
SUPPORT ARM PIVOT Monitor adaption Colours to choose Max. load capacity support arm Max. load monitor adaptation Product weight Part number prepared to accept Mindray mounting adapter decorative parts:
More informationField bus connections Link structure BDC Link structure BDC, B-design. Brochure
Field bus connections, B-design Brochure Field bus connections, B-design Bus coupler with driver Direct field bus connection (BDC) Bus coupler with driver direct field bus connection Field bus protocol:
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationPGS10 Series Pressroom Gripper System
PGS10 Series Unique, patented, modular design uses common components to reduce your purchase price and stocking requirements. Features a robust hardened steel chassis and grip force up to 450 lb at 80
More informationAPC Open Frame Rack Networking Solutions
APC Open Frame Rack Networking Solutions NetShelter 2- and 4 Post Open Frame Racks The NetShelter 2 and 4 Post Open Frame Racks offer a quality solution for the economical installation of rackmountable
More informationSpeed. Copyright by Silca S.p.A All Rights Reserved. the products quality.
www.silca.biz Speed New, fast, compact, precise and userfriendly, Speed is perfect for key cutters who have just entered the key duplication business, but also for experienced Duplicating Centres that
More informationCounters, Process Displays, Timers, Tachometers. Product overview
Counters, Process Displays, Timers, Tachometers Product overview Totalizers mechanical Stroke counters Three designs, optional with 5-, 6- or 7-digit display. Manual reset Surface mount with mounting plate
More informationSUPPORT ARM PIVOT. Monitor adaption Colours to choose
SUPPORT ARM PIVOT Monitor adaption Colours to choose Max. load capacity support arm Max. load monitor adaptation Product weight Part number 5 plunge plate decorative parts: RAL 5013 blue / RAL 7024 dark
More information2016 Product Catalog
2016 Product Catalog Photoclam is a company incorporated in the Republic of Korea. Based on the precision processing technology accumulated and required for development and manufacture of metallic products
More informationAdjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
More informationSintesi range. Professional lighting equipment for theatres
Sintesi range Professional lighting equipment for theatres General features Sintesi range The Sintesi name and range were created from the idea to bring together into one line of high level luminaires
More informationAdvancing Cancer Diagnostics Improving Lives. Leica RM2235. The Manual Rotary Microtome For Outstanding Durability, Precision, and Comfort
Advancing Cancer Diagnostics Improving Lives Leica RM2235 The Manual Rotary Microtome For Outstanding Durability, Precision, and Comfort 2 As Durable as Ever, Enhanced Precision and Comfort Like Never
More informationSFC KOENIG Product Catalog
SFC KOENIG Product Catalog 8 2016 SFC KOENIG I www.sfckoenig.com The World s Leading Sealing & Flow Control Technology With over 3 billion parts installed and failure rates less than 1 part per million,
More informationSurface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
More informationSUPPORT ARM PIVOT. Monitor adaption Colours to choose
SUPPORT ARM PIVOT Monitor adaption Colours to choose Max. load capacity support arm Max. load monitor adaptation Product weight Keyboard tray dimension Part number prepared to accept Mindray mounting adapter
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationDO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
More informationMICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
More informationAHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationCams, Latches & Locks
a Keys & Cams Rod Latching Systemss Cam Latches Compression Latches Cam Locks Cams, Latches & Locks b ov-cam-latches-&-locks-divider - Updated - 12-01-2017 Compression Locks lever latch - adjustable grip
More informationPHX 250W LED PROFILE SPOT 250 Watt LED
PHX 250W LED PROFILE SPOT 250 Watt LED The 5, 10, 19, 26, 36 and 50 fixed focus PHX LED ellipsoidals are state of the art luminaires in function, style, and efficiency. These ellipsoidals have been designed
More informationBAR GRILLE TYPE: A-600
Tel: Sales 0 I Web: www.grada.co.uk TYPE: A00 Installation dimensions AC00 AA00* / AD00 + GR00 0. (+0)(L+0)* / (+0)(L+0) (0)(L0) 0* () (L) ( L) AB00* / AE00 + GR00 (+0)(L+0)* / (+0)(L+0) (0)(L0) 0* ( L)
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationExpress modular downlighter iguzzini
Fittings with professional optics for recessed or modular installation with three types of frame: Frame, Minimal and Rounded. Optical assemblies made of die-cast aluminium and thermoplastic material, available
More informationA10 Micro Speaker Clamping A10. Micro Speaker Clamping FEATURES
A10 Micro Speaker Clamping Micro Speaker Clamping A10 FEATURES Compact, transportable, multifunctional transducer measurement platform For Micro Speaker, Headphones, Tweeter and any transducer up to 100
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationRavenna TM. Fixture Options: Ordered Separately from Fixture. See page 2. Mounting Options: Ordered Separately from Fixture.
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast low copper aluminum with diecast cover, stainless steel fasteners,
More informationATX JBEA and ECEA Series Aluminum Enclosures Increased Safety
Applications Designed for use in Zone 1 or 2 areas where flammable gases or vapors are present either continuously or intermittently. Ideal for use in wet or corrosive atmospheres. Petroleum, chemical,
More informationRavenna TM. Fixture Options: Ordered Separately from Fixture See page 2. Mounting Options: Ordered Separately from Fixture See pages 3-5
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast low copper aluminum with die-cast cover, stainless steel fasteners,
More information