FIST-GCO2-F. Flat FIST Generic Closure Organizer. Features
|
|
|
- Alexis Atkinson
- 5 years ago
- Views:
Transcription
1 The generic closure FIST-GCO2-F is a compact version of CommScope s standard FIST-GCO2 closure. Like the FIST-GCO2, the FIST-GCO2-F is an environmentally sealed enclosure for the FIST fiber management system allowing splicing and passive component integration in the external network. Features Single-ended design Base and dome sealed with latches and O-ring system Bases available with 6 round s (drop cables) and 1 oval (looped cables) or 8 round s Single-sided UMS (Universal Mounting System) frame provides foundation for mounting combinations of SOSA2 (splice only sub-assembly) and/or FSASA2 (field-installable splitter array sub-assembly) modules, which consist of a modular grooveplate and trays Compatible with most common cable types: e.g. loose tube, central core, ribbon fiber Uncut fibers can be stored in trays Mounting ears available as part of the dome Well-suited for use in combination with heat shrink or multi-out gel seals Closure can be used in aerial, pedestal and underground (up to 5 meters waterhead) environments 1
2 Dimensions and Capacities 1 Key B Dome 2 Optional valve 3 Wrap-around grooveplates 4 Base 5 Latch C A W1 L A W2 GCO2-FC GCO2-FD Closure dimensions in mm Length (L) Width at base (D) 279/ /150 Cable s dimensions in mm Oval (B/C) 82/30 82/30 Round s (A/C) Splice capacity Fibers Trays (16 UMS units)1 Fibers Trays (24 UMS units) 1 Single circuit splicing (2 primary coated fibers) Single element splicing (12 primary coated fibers) Ribbon fiber splicing (4/8-fiber) The space occupied by trays in the universal mounting system (UMS) is expressed as UMS units. One UMS unit equals 6mm. A single circuit tray occupies 1 UMS unit; a single element or 4/8 fiber ribbon tray occupies 2 UMS units; a 12-fiber ribbon tray requires 3 UMS units. Capacities shown above are based on use of FIST-SOSA2 trays; capacity can be increased by the use of high-density versions of FIST-SOSA modules and trays. Please contact your local CommScope sales representative for more information. 2
3 Cable capacity in mm Oval (2 ) Heat shrink Gel Seal Minimum Ø 2x12 2x5 Maximum Ø 2x25 2x18 Round s (6 or 8 depending on base chosen) 1 round cable/ 2 round 3 round 4 round 4 flat 8 round 16 round Heat shrink Gel Seal Gel Seal Gel Seal Gel Seal Gel Seal Gel Seal Gel Seal Minimum Ø 1x5 1x11 2x8 3x6.5 4x4 4x(6.5x11) 8x3 16x0 Maximum Ø 1x30 1x14 2x11 3x8 4x7 4x(6.5x11) 8x5 16x3 Ordering Information FIST-GCO2 - XX X - X X Type Flash Test Valve FC 384mm long with 16 UMS units V Pre-Installed flash test valve FD 432mm long with 24 UMS units N No flash test valve Number of Ports Ground feedthrough 6 Round s + 1 oval 8 Round s G N Pre-Installed ground feedthrough No ground feedthrough Accessories Cable Attachment Kits Description Quantity/package Ordering number Universal strength member termination kit Metallic/non-metallic strength members 1 piece FACC-UCT-01 Diameter range mm Includes: 1 or 10 strength member terminations; 1 or 10 screws; 1 Allen key 10 pieces FACC-UCT-10 External cable fixation bracket Cable securing frame Mounts to base of closure with 2 screws FIST-GCO2-FX6-EXT/CF Used in combination with FIST-GCO2-RSKG Stores large quantities of small cables 3
4 Accessories (continued) Heat Shrink Cable Sealing Kits Description Cable diameter range in mm (minimum/maximum) Ordering number Heat shrink seal kits for oval s Single fiber loose tube cable Seals 2 cables Includes plastic sleeve to store uncut loose buffer tubes on the backside of the UMS profile FIST-GCO2-OSK-LTS Includes 2 universal strength member termination kits Central core cable Seals 2 cables FIST-GCO2-OSK-CC Includes metal bracket to terminate central core cables Loose tube ribbon cable FIST-GCO2-OSK-LTR Wrap-around cable seal kit Seals 2 cables - FOSC-CSEAL-2NW Used in case of re-entry/repair Heat shrink seal kits for round s Single fiber loose tube cable Seals 1 cable 5-30 FIST-GCO2-RSK-LTS Includes universal strength member termination kit Central core cable (single fiber and ribbon) Seals 1 cable 5-25 FIST-GCO2-RSK-CC Includes metal cable fixation bracket and spiral tubing to terminate central core cables Loose tube ribbon cable FIST-GCO2-RSK-LTR Wrap-around cable seal kit Seals 1 cable - FOSC-CSEAL-1NW Used in case of re-entry/repair 4
5 Accessories (continued) Multi-drop Cable Heat Shrink Seals for Round Ports Base with 6 to 8 round s Port ø: 30mm Permits feeding of more than one cable through a round Allows addition at a later date of cables to already installed in the field Kits includes multi-termination plate with strength member fixations Description Diameter of first cable in mm Diameter of additional cables in mm Ordering number Kit for 1 cable and 2 tubes FIST-GCO2-MULTI2/ FIST-GCO2-MULTI2/ FIST-GCO2-MULTI2/12 Kit for single fiber loose tube cable (includes 3 tubes) 9.5 FIST-GCO2-MULTI3/ FIST-GCO2-MULTI3/11 For use with FIST-GCO2-MULTI kits Cable seal to seal cable onto tube FIST-GCO2-MULTI-SEAL Multi-termination plate with 3 strength member fixations FIST-GCO2-MULTI-UCT 5
6 Accessories (continued) Gel-Seal Cable Sealing Kits for Oval and Round Ports FIST - X S K G - X Port Seal Type Port Seal O R Oval seal Round seal Round seal 1 1 cable ø mm 2 2 cables ø 8-11 mm 3 3 cables ø mm 4 4 cables ø 4-7 mm 4F 4 cables 6.5 x 11 mm 8 8 cables ø 3-5 mm cables ø 0-3 mm Oval seal 20 * Looped ø mm LEAVE BLANK Looped ø 5-18 mm * For FIST-GCO2-Bx closures only Visit our website or contact your local CommScope representative for more information CommScope, Inc. All rights reserved. FIST and all trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS EU (12/15)
The FOSC-400 closure is a single-ended, environmentally sealed enclosure for fiber management in the outside plant network.
The FOSC-400 closure is a single-ended, environmentally sealed enclosure for fiber management in the outside plant network. Features Single-ended design Available in 4 sizes Base and dome sealed with a
TENIO. Advantages. Fiber Closures
CommScope s fiber optic splice closures are synonymous with excellence in sealing, fiber management, ease of use and design flexibility. Building on almost 30 years of innovation and industry leadership,
TENIO. Fiber Closures
TENIO Fiber Closures CommScope s fiber optic splice closures are synonymous with excellence in sealing, fiber management, ease of use and design flexibility. Building on almost 30 years of innovation and
on-going maintenance by less management hardware with a new sealing system to simplify training and reduce
Fiber Closures Fiber Closures CoScope s fiber optic splice closures are synonymous with excellence in sealing, fiber management, ease of use and design flexibility. Building on almost 30 years of innovation
3M CMD Fiber Solutions
Communication Markets Division 1 3M CMD Fiber Solutions Fiber Dome Heat Shrink Closures: FDC-HS-L5 FDC-HS-S4 June 17, 2007 3M Communication Markets Division Communication Markets Division 2 3M Communication
FOSC 400 Closures and Accessories 2015 ORDERING GUIDE 1ST EDITION
Closures and Accessories 2015 ORDERING GUIDE 1ST EDITION Contents How to Order FOSC 400 Closures 3 How to Order Accessories for the FOSC 400 Closures 5 Other FOSC Fiber Optic Splice Closures 9 Product
Design. Application. All closure sizes are available with three different fiber management systems included in the pack.
Description Design The Universal Closures consist of two plastic end caps type (description see on page 80 f.) and a plastic closure tube. The longitudinally split closure tube is closed with two plastic
FIBER OPTIC DOME CLOSURES OZKS 160
FIBER OPTIC DOME CLOSURES OZKS 160 Fiber optic dome closures OZKS 160 are universal enclosures for fiber optic underground duct, buried and aerial ADSS cables, for all kinds of telecommunication networks.
3M Fiber Dome Closure FDC 08S-A. 3M Fiber Dome Closure FDC 08S-B. Constructed of highly chemicalresistant
The new, compact 3M Fiber Dome Closure FDC 08S is a hermetically sealed fiber dome closure for aerial, buried above-grade, and buried below-grade applications. This closure is designed to meet the needs
FIST-GPS2/3. Fiber Management Splice/Patch and Patch/Patch Shelves. Features
FIST-GPS shelves feature the FIST fiber management system and provide a platform for patching and splicing within a rack environment. The shelves house FIST splice and patch trays (FIST-GPST- 12 or FIST-GPSTF-12).
3M Fiber Dome Closure Family. Reliable. Fiber. Protection
3M Fiber Dome Closure Family Reliable Fiber Protection More flexibility for your complex fiber optic network A full line of closures and accessories designed to help protect fiber optic facilities in many
FDH Sealed Fiber Distribution Hub. Features and Benefits
Introducing the sealed fiber distribution hub (FDH) 4000 from CommScope. Increasingly, aesthetic ordinances and equipment size restrictions are making it more difficult to secure permits in FTTx deployments.
3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S External Drop Termination
3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S External Drop Termination The compact 3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S are hermetically sealed fiber dome terminal closures for
Low and Medium Capacity Fiber Optic Splice Cases
Low and Medium Capacity Fiber Optic Splice Cases Channell Commercial Corporation manufactures a full range of fiber optic closures for voice, data and broadband requirements. To accommodate the ever increasing
Fibre Optic Splice Cases and Trays
Fibre Optic Splice Cases and Trays Table of Contents: Description Page Low and Medium Capacity Fibre Optic Splice Cases 3 Butt Style Splice Case Enclosures 4 14000 Series 12-24 Fibre Splice Capacity 4
BPEO Fibre Optic Closures
BPEO Fibre Optic Closures Protecting Your Fibre Connections 3 3M BPEO Evolution The BPEO Evolution Concept The BPEO Evolution product range concept is similar to the modular approach often used in copper
Fiber Optic Splice Closures
Fiber Optic Splice Closures Dome In-line Wall-Outlet Termination and more www.dafnia.com marketing@dafnia.com Dome Closure Huatel Model HTSC-209A HTSC-204A/B HTSC-P204A/B HTSC-221C HTSC-360A/B LxWxH 288mm
CLOSURES. Four simple steps: 1. Selection of housing type 2. Selection of tray type 3. Selection of cable entries 4. Selection of accessories
CLOSURES The FO closures are branching and connecting sleeves for external use. They contain splicing cassettes and other passive elements for the fibre management and protect their contents from external
3M SLiC Fiber Aerial Terminal Closure 530 Internal for Direct Spliced Drop Terminations. 3M External Cable Assembly Module (ECAM) 12mm Drop Entry Kit
3M SLiC Fiber Aerial Terminal Closure 530 Internal Drop Terminations for Direct Spliced Drops The 3M SLiC Fiber Aerial Terminal Closure 530 with Internal Drop Termination is an aerial, strand-mount, free-breathing
FACT OPTICAL DISTRIBUTION FRAME SYSTEM
FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/ Patch and Patch/Patch For almost 30 years, TE Connectivity has led the industry with solutions such as FIST fiber management system,
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
FIST. Fiber Infrastructure System Technology. Generic Racks (FIST-GR2)
FIST Ordering Guide FIST Fiber Infrastructure System Technology Generic Racks (FIST-GR2) This document provides assistance with the selection of racks for use in FIST applications. It includes the following
BUDI Connectorized with FIST
What is UDI? enefi ts Features UDI is a product range of compact, wall Easy to install Designed to operate in category C mountable fi ber enclosures for indoor and Compact and fl exible design (controlled),
Optical Closures 2012
Optical Closures 20 0046(0)3155 59 70 Säterigatan 23 417 64 Göteborg, Sweden 0046(0)3155 59 70 Table of Content Order Form Company Date YYYYMMDD Org.nr Order form 3 FOCUS ODC 4 Outside Plant Enclosures,
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Outside Plant. Medium Multi-Function Joint - MMJ. Features and Benefits. Prysmian Part Numbers: See page 3. Kit Contents.
Medium Multi-Function Joint - MMJ Prysmian Part Numbers: See page 3 The Medium Multi Function Joint (MMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint, Track
Outside Plant. Compact Multi-Function Joint - CMJ. Features and Benefits. Prysmian Part Numbers: See page 3. Kit Contents.
Compact Multi-Function Joint - CMJ Prysmian Part Numbers: See page 3 The Compact Multi Function Joint (CMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint, Track
Termination Box MOTB-001
Termination Box MOTB-001 Description: Termination box MOTB-001 is suitable to connect the drop (or pigtails) to the raiser fibers splices. The termination box is for indoor wall mounting. Light weight,
Aerial. Pedestal. Outside Plant: Buried Fibre
4. Aerial- and Pole Fibre Distribution 4. Aerial- and Pole Fibre Distribution Façade Pole Wallmount Aerial Pedestal : Buried Fibre Product Range > 3M SLIC 3M SLIC are in-line closures designed for aerial
Ordering Guide for FIST Blue Label Racks (FIST-GR3)
Page 1 of 13 Ordering Guide for FIST Blue Label Racks (FIST-GR3) This document provides assistance with the selection of racks for use in FIST applications. It includes the following sections: 1 Product
HD Dome Closure COYOTE. Features and Benefits
COYOTE HD Dome Closure The COYOTE HD (High-Density) Dome Closure offers an alternative fiber organizer to support high-density splice applications within the same footprint as PLP s existing 9.5" x 28"
Outside Plant. Compact Multi-Function Joint - CMJ. Features and Benefits. Prysmian Part Number: CMJ-E-X-XXXX-X-Y-X. Kit Contents. Closure Part Number
Compact Multi-Function Joint - CMJ Prysmian Part Number: CMJ-E-X-XXXX-X-Y-X The Compact Multi Function Joint (CMJ) is for jointing optical fibre cables. The joint is ideal for use as a Cable Chamber Joint,
MDUO 12 Prewired Type V01 3M TM. Benefits. Features. Multidwelling Unit for 12 customer connections
3M TM MDUO 12 Prewired Type V01 Multidwelling Unit for 12 customer connections The box was designed to be a cross-connect interface between a greenfield network and a building network. It allows the unbundling
Section 21. Telecommunication Hardware. BuyLog Catalog 21-1
Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader
Outside plant solutions for multisystem operators
Outside plant solutions for multisystem operators MSO: outside plant solutions Leading innovation in fiber connectivity and cable management solutions CommScope offers a unique and diverse product line
6.0 Connectorised Closures
6.0 6.1 FDN AB Length with 48 LC/SC Adaptors and Basket 122 FDN AB Length with 48 LC/SC Adaptors 123 FRBU B Length with 24 SC Simplex Adaptors 124 FST 13 Port with 2 SC Duplex Adaptors 125 119 6.1 Introduction
3M Telecommunications. Solutions for Networks BPEO. Fibre Optic Closures
3M Telecommunications Solutions for Networks BPEO Fibre Optic Closures Waterproof splice protections BPEO product has evolved in 2 main areas: The BPEO Evolution Concept The concept of the BPEO Evolution
Fiber-to-the-Home (FTTH) Pedestal
Purpose: To describe Fiberdyne's FTTH distribution enclosure and its configuration options. Conceptual Usage: The FTTH Pedestal is a general-purpose, outdoor enclosure. It is the main node for voice, data
Items Dimension(WxDxH) Max.Capacity Mounting P-FDB8 181X45X207mm 8 ports & splice Pole/Wall P-FDB16 220x80x300mm 16 ports & splice Pole/Wall
P-FDB General Features Available in 2 sizes, P-FDB8 and P-FDB16 Can accommodate 1x8 / 1X16 PLC splitters and 8 / 16 SC adapters Ultra violet resistant and waterproof Wall and pole mountable 2 inlet ports,
Aerial Weathertight Fiber Optic Splice Closures FSCO-AS
OPTICAL FIBERS OPTICAL COMPONENTS OPTICAL CABLES RFTS Aerial Weathertight Fiber Optic Splice Closures FSCO-AS Features FSCO-AS Aerial Weathertight Splice Closures are designed for aerial, strand-mount
Outside Plant. Modular Jointing System MJS-OPGW. Features and Benefits. Prysmian Part Number: See below. Kit Contents. Additional Items.
Modular Jointing System MJS-OPGW Prysmian Part Number: See below The OPGW Modular Jointing System (MJS-OPGW) is a stainless steel joint for use within the external optical fibre network. It is primarily
FP front panel. Features: Modular design 1U or 2U version Connector panels or brush entry
FP front panel The FP front panel introduces a low cost solution for fiber optic cable termination. The modular design can accept wide range of optical fibers capacity with various connector types. Modular
FIBER OUTSIDE PLANT. Sealed & Aerial Splice Closures Fiber Demarcation Fiber Enclosures
FIBER OUTSIDE PLANT Sealed & Aerial Splice Closures Fiber Demarcation Fiber Enclosures Table of Contents LightGuard Sealed Fiber Optic Splice Closures.............. 2 Peel and Seal Grommet Systems for
There, we ve put it all together. Joints and fibre cables in one complete solution.
There, we ve put it all together. Joints and fibre cables in one complete solution. Joints and fibre cables in one complete solution. Now you re able to buy both the cable and the joint from one manufacturer
FTTX Solutions Outdoor FDH PRODUCT CATALOG 2ND EDITION
2015 PRODUCT CATALOG 2ND EDITION CommScope s FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,
There, we ve put it all together. Joints and fibre cables in one complete solution.
There, we ve put it all together. Joints and fibre cables in one complete solution. Joints and fibre cables in one complete solution. Now you re able to buy both the cable and the joint from one manufacturer
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and
OptiSheath Aerial Terminal, SCA-9T Series
Features and Benefits Design includes aerial hanging brackets Easy installation Quick-release clamps Easy terminal re-entry Individual strain-relief Fiber protection and continuity Cable sealing and reusable
400A Fiber Optic Interface Unit Space-Saving Enclosure Provides Easy Access to Connectors, plus Increased Security
400A Fiber Optic Interface Unit Space-Saving Enclosure Provides Easy Access to Connectors, plus Increased Security Applications 400 A1 LIU 400 A2 LIU Because of its security features and flexible design,
OPTICAL CABLE & CABLE ASSEMBLY
OPTICAL CABLE & CABLE ASSEMBLY FIBER OPTIC INDOOR CABLE MM 50 m (OM2) MULTI LOOSE TUBE CABLE Indoor Thight Buffer LSOH, 4 core NVLINMM2004LSOH MM 62.5 m MM 50 m (OM2) MM 50 m (OM3 550+/ OM4) Direct Burial
Aerial Façade. Cabinets and borders. Butt and Sleeves Closures for manholes and handholes
6. Building Risers 6. 3M Solutions for Building Risers Single Family Units Skyscrapers Aerial Façade Cabinets and borders Central Telecom POP Butt and Sleeves Closures for manholes and handholes Applications
Shenzhen KINGTON Optic Co.Ltd.,as a high-tech enterprise,is found in 2005 and engage in R&D,production and exporting fiber optic equipments.equipped with international artworks and test equipments,brought
3M Fibrlok Optical Splice System
3M Fibrlok Optical Splice System The 3M Fibrlok Optical Splice is one of the leading mechanical splices and is now specified in fiber-to-the-premises projects as a substitute for fusion splicing. It provides
Product Catalogue 2005/2006
Product Catalogue 2005/2006 090.2000 010.1536 VS Compact Applications 1-Pair Dropwire Module Modules, platforms, accessories R&M a decision with a future Choosing the right passive network structure is
Splice Trays An Evolant Solutions Product
Applications For use with indoor or outdoor splice hardware Protects and manages fibers and fiber splices Used at field splice, transition splice and end splice locations Description splice trays use proven
Product Description. Features & Benefits. Multilink Inc All Rights Reserved. Removable Seal Window Opening:
SFX-0 Single In Line Fiber Optic Splice Enclosure 020-234-10 Product Description The Starfighter Xpress comes from a heritage of proven and established in-line splice enclosures that are tested in accordance
CommScope standard density fiber optic panels. High-performance communication solutions
CommScope standard density fiber optic panels High-performance communication solutions For the last 50 years, fiber optic networks have steadily expanded throughout major metropolitan cities and surrounding
CATALOGUE FOSC. Dome Type. M Series FIBER OPTIC SPLICE CLOSURES. YOUR OPTICAL FIBER EQUIPMENT PROVIDER
YOUR OPTICAL FIBER EQUIPMENT PROVIDER CATALOGUE Dome Type M Series FIBER OPTIC SPLICE CLOSURES TUV Austria Certificate Registration Number: 20100102004908 fybera Dome Type, M series, Fiber Optic Splice
TAIHAN ELECTRIC WIRE CO.,LTD. FTTH Connectivity Material Presentation
TAIHAN ELECTRIC WIRE CO.,LTD FTTH Connectivity Material Presentation FTTH Diagram 5 Central Office Part FDF & ODF Part Description Product Interconnection frame Fiber Distribution Rack Cross connection
Communication Markets Division. Solutions. Field BPEO 2
Communication Markets Division 1010111 11101011010101011010 1010111 11101010101 110001010110101000101011 1010111 1110101101010 101011100101011010010101 1110 1100010101101010 1010111 11101011010101011010
COYOTE LCC (Low Count Closure)
LCC (Low Count Closure) The LCC s compact size, use of the versatile grommet system and internal LITE-GRIP Splice Platfm are designed to make this rugged closure the economical choice f new installations
INDEX SECTION PAGE TYKOFLEX
INDEX SECTION TYKOFLEX Application Map for T240 outside plant closures Application Map for T240 outside plant closures - Continued T, TS, TSG for manholes, poles & tunnels Powerline Closures & Outdoor
Optotec. A high tech company providing passive components & accessories for telecommunications networks. Company Profile Connecting
Optotec A high tech company providing passive components & accessories for telecommunications networks Company Profile 2010 1 Connecting 18 years of experience in fibre optic Who we are? o Founded in 1992
COYOTE Fiber Optic Closures. Featuring the Silicone Grommet Sealing System. The 2nd Generation of Products
Fiber Optic Closures Featuring the Silicone Grommet Sealing System The 2nd Generation of Products PAGE 1 2 3 4 5 6 7 8 10 12 14 18 19 20 22 24 25 26 28 CONTENTS Maximum Splice and Express Capacities for
10.0 Enclosures Enclosures. Integrated Routing Connectorised Fibre Enclosure 143. Integrated Routing Fibre Enclosure 144. Integrated Routing 145
10.0 Integrated Routing Connectorised Fibre Enclosure 143 Integrated Routing Fibre Enclosure 144 Integrated Routing 145 Integrated Routing Module 146 CPU - Customer Premise Unit 147 BFP - Building Flexibility
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
Distribution Enclosures for Fiber Optic Applications. Outside Plant for Business-Critical Continuity
Distribution Enclosures for Fiber Optic Applications Outside Plant for Business-Critical Continuity Emerson offers a comprehensive line of NetSpan Integrated Solutions pre-configured for FTTx deployment.
Ordering Guide of the FOSC Splicing Trays and Storage Baskets
Page 1 of 13 112003 Ordering Guide of the FOSC Splicing Trays and Storage Baskets This document provides assistance with the selection of FOSC trays and storage baskets for use in FOSC closures. It includes
BUSINESS CLASS SERVICES. COMMERCIAL ACCESS SOLUTIONS Ordering Guide
BUSINESS CLASS SERVICES COMMERCIAL ACCESS SOLUTIONS Ordering Guide POINT - TO - POINT ARCHITECTURE CUSTOMER$$PREMISES COMM$ACCESS$ ROUTER 8ch$&$10ch$CWDM$HiDT mounted$in$a$medium$ust Fiber$Splice$Shelf$5$1RU
FTTX Solutions. Multiport Service Terminal (MST) and Hardened Drop Cables. Benefits:
and Hardened Drop Cables CommScope s FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability,
Closet Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
NetSpan FDP Series. Integrated Fiber Distribution Pedestal Solution. Outside Plant for Business-Critical Continuity
NetSpan FDP Series Integrated Fiber Distribution Pedestal Solution Outside Plant for Business-Critical Continuity Features & Benefits Unique internal back-to-back dual compartment configuration (fiber
OAsys. SRS3000 1U Splice and Patch Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Number: See table on following pages.
SRS3000 1U Splice and Patch Shelf Prysmian Part Number: See table on following pages. The SRS3000 Splice and Patch Shelf is a modular unit available in a variety of configurations for integration in to
Easy Access Cable FTTx solution. FTTH IFDB-C0-x cabinet
FTTH IFDB-C0-x cabinet Type: IFDB-C0-x 11.02.2013 Code: DSIFDB-C0-x, see the Ordering Information section DESCRIPTION: DSIFDB-C0-x cabinet is specifically designed to serve as a distribution point for
Closet Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
C5C Cross-Connect System
C5C Cross-Connect System I N S T A L L A T I O N I N S T R U C T I O N High-Density Connection Blocks 1.0 General Product Information The C5C cross-connect system is comprised of a high-density connection
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE
OMEGA MODULAR PATCH PANEL EMPTY ENCLOSURE The Omega MPP enclosure is based on a 19" frame, with 4 empty module slots for MPP modules. Highly flexible : any mix between twisted pair and optical fiber modules.
Section 15 Cable Demarcation Enclosure
Cable Demarcation Enclosure: Section 15 Section 15 Cable Demarcation Enclosure Table of Contents Page Cable Demarcation Enclosure...15-2 Cable Demarcation Enclosure Maximum Protection The enclosure is
Data Sheet. Customer Distribution and Termination Enclosure OptiBox 4
OptiBox 4 is a fiber optic distribution and termination enclosure, which is used for splicing, patching and to perform with passive optical components. The straightforward mounting box has its main use
FSC 288, 432, 576 or 1152-Port PON Cabinets
Application Provides an interconnect environment from the DF network through the optical passive splitter to the AF network in an FTTH PON OSP cabinet. The FieldSmart FSC PON 1152- Port Cabinet sets the
Tykoflex Splice System
for 9 /ETSI optical fibre racks T YKOFLEX SPLICE SYSTEM Tykoflex Splice System About Tykoflex With telecom and fibre optics technology now being used for a large number of applications such as telephony,
Tykoflex cold method. A safe, simple and proven cold method TYKOFLEX COLD METHOD
Tykoflex cold method A safe, simple and proven cold method TYKOFLEX COLD METHOD Our new cold compression method Tykoflex cold compression method has bushings for micro cables in the size range of Ø.8-9.5
Miniature outside plant plug-and-play solutions. White paper
outside plant plug-and-play solutions White paper A new class of miniature fiber optic connectors provides a plug and play interface between fiber optic cables and consumers in FTTP applications. These
3M SLiC Fiber Splicing Workstation with Cleaver Arm
3M SLiC Fiber Splicing Workstation with Cleaver Arm Terminal Closure 530 Closures 533, 547 and 733 Instructions September 2016 78-8135-7148-2-D 2 September 2016 78-8135-7148-2-D 1.0 General 1.1 The 3M
Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08
Mounting Bracket for 8 in. Charles Industries Pedestal for use with 3M Fiber Dome Terminal Closure FDT 08 Instructions October 2006 78-8135-6184-8-A 1.0 Introduction This kit mounts a 3M Fiber Dome Terminal
BEJED DISTRIBUTION PRODUCTS FAX:
1 BEJED DISTRIBUTION PRODUCTS 503.281.8153 800.232.3533 FAX: 503.281.3339 www.bejed.com Profile BEJED, Inc. s engineering designs have been supporting the telecommunications industry for over 30 years.
SR60 Busbar System 2/1 2/2. General Data. 2/3 Busbar routing. 2/7 Mounting components. 2/13 Accessories
/ SR0 Busbar System General Data / Busbar routing / Mounting components / Accessories / SR0 Busbar System General Data Overview The SR0 busbar system is a modular system for busbars, for installation in
LANscape, Hardware solutions
Product Family: Product: Fibre: LANscape, Hardware solutions Splice trays InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF-28e OS2 Application Corning Cable Systems splice trays are suited
SUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
FDH Sealed fiber distribution hub and integrated splitter module solution
FDH 4000 Sealed fiber distribution hub and integrated splitter module solution The United ations estimates that 70 percent of world population will be urban by 2050, meaning cities will need to have supercity
Rack Mounted Products
SRS3000 1U Patch Only Shelf Prysmian Part Number: See table on following pages. The SRS3000 Patch Only Shelf is a modular unit available in a variety of configurations for integration in to 19 and ETSI
3M Fiber Distribution Units 8400 Series
Communication Markets Division 3M Fiber Distribution Units 400 Series Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to simplify your cable management
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions
Adapter Kit - QSI Electronics to G-Series Meter Installation Instructions These installation instructions cover the adapter kit installation of the QSI1, QSI2 and QSI3 versions of communications electronics
3M Fiber Distribution Units 8400 Series. The Network of Networks. Flexibility for. Networks. Growing
3M Fiber Distribution Units 8400 Series The Network of Networks Flexibility for Growing Networks Flexible options to meet growing needs in limited spaces 3M offers a full line of patch panel designs to
FTTH SOLUTION. Content. Contral. Apartment. house. house 13P. 11P Adapter 11P 10P 11P 13P 13P. 10P Mechanical Splice 11P 10P 11P 14P 10P.
FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house
4.5 Components for TV/SAT, telephone installations and Category DATATEL Series - TEL DATATEL Series - CAT5 DATATEL Series - TV/SAT
Components for TV/SAT, telephone installations and Category 5 DATATEL - TEL DATATEL - CAT5 DATATEL - TV/SAT 7 7 Components for telephone installations FIXED TELEPHONE SOCKETS Type RJ Socket 6/ surface
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749
Product information 19" 1U UniRack 24xLC-Duplex OM4, PC, ceramic, Bm/3 R816749 1 Pcs. Front panel with staggered arrangement of adapters. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius
Compact Series Wallmount Enclosures
Compact Series Page 1 of 5 Overview ARIA s Compact Series are small wallmount enclosures that features patch and splice capabilities. The enclosures also support 12 fiber MPO to LC connector plug and play