WIDE-DISPERSION SPEAKER SYSTEM F-1000/F-2000 SERIES

Transcription

1 WIDE-DISPERSION SPEAKER SYSTEM F-1/F-2 SERIES F-1B/BT/BTWP F-1W/WT/WTWP F-2B/BT/BTWP Without Horn Adapter (11 1-deg Octagon Horn) Horizontal 11 F-2W/WT/WTWP With Horn Adapter (8 8-deg Octagon Horn) Horizontal 8 DESCRIPTION The TOA F-1 and F-2 Series comprise a two-way speaker line of compact units offering wide frequency response and higher, more powerful performance. These highly adaptable speaker systems are intended to meet the requirements of a wide range of venues and applications, both indoors and outdoors. For clear, wide-area sound coverage, the Series include Octagon Horn wide dispersion-angle (11 x 1 on the F-2 and 9 x 9 on the F-1) high-frequency horns, plus an easily-added 8 x 8 dispersion angle horn adapter on the F-2 for tighter dispersion control. Both highimpedance and low-impedance models are available. Low impedance models come with separate HF and LF protection circuitry. High impedance models have a rear-panel rotary control for making impedance settings that optimally match amplifier and speaker performance. The speaker units have a design that combines stylishness and a high degree of performance-enhancing rigidity. Even the decor-enhancing convex bulge on the side of the casing serves to improve rigidity. Brackets for easy speaker-stand, wall and ceiling installation are included, and there are also optionally available brackets for more challenging installation venues and sound reinforcement applications. Push-in terminals make connections quick and easy, and there are models for outdoor use that meet IP-X4 splash-proof standards. FEATURES 11 x 1 (F-2) and 9 x 9 (F-1) dispersion angle high-frequency horns (Octagon Horn) ensure an enhanced sound coverage area and a more even balanced tone. Easily-mountable 8 x 8 dispersion angle horn adapter included on the F-2 for increased dispersion control. Waterproof design with anticorrosive punching net and terminal cover, meeting IP-X4 splash-proof ratings, available on models F-1BTWP/WTWP and F-2BTWP/WTWP. All speaker models are repaintable. Low impedance models have high and low frequency filter and protection circuitry. Included accessory brackets allow a wide choice of installations on walls and ceilings. Optionally available brackets meet an even wider variety of installation demands. Stylish and highly rigid casing design for attractive installation with clearer sound reproduction. Sensitivity: 87dB, 1W, 1m (F-1) 92dB, 1W, 1m (F-2 without horn adapter) 93dB, 1W, 1m (F-2 with horn adapter)

2 F-1 SERIES F-1B/W/BT/WT/BTWP/WTWP APPEARANCE AND DIMENSIONAL DIAGRAM 13 (5.12") 131 (5.16") 2 M5 (depth 14 (.55")) 3 (1.18") TERMINAL COVER USE (F-1BTWP/WTWP only) Tapping screw 4 x 12 (accessory) Input terminal Terminal cover (accessory) 22 (7.95") 3 (1.18") Speaker cable Bottom View 3 (1.18") 28 (1.1") Rear View 2 M5 (depth 14 (.55"))* *Hole plugs are pre-fitted into the holes at the factory. Before attaching the speaker mounting bracket to this side, remove them using a pointed tool. Rotally switch (F-1BT/WT/ BTWP/WTWP only) Bushing* * Screwed onto the Terminal cover at the factory. [Stripped conductor] 1mm 3mm Notes For the speaker cable, use a cable with a diameter of 6 1 mm, which will fit the cable bushing. To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and tighten the bushing on the cover. WALL BRACKET AND JOINT BRACKET MOUNTING Vertical speaker mounting Wall bracket mounting Vertical installation Horizontal: Max. 82, Horizontal installation Horizontal: Max. 6, Hexagon bolt M6 x 12 (with plain washer and spring washer) Wall bracket mounting 25mm 4-ø6mm 3mm Fixing bolt M5 x 6 4-ø6m Fixing bolt M5 x 6 Speaker bracket 3mm Ceiling mounting SPECIFICATIONS 3mm Model No. F-1B F-1W F-1BT F-1WT F-1BTWP* F-1WTWP* Enclosure Type Bass-reflex type Power Handling Capacity 3 W (continuous pink noise) 9 W (continuous program) Rated Input 15 W Rated Impedance 8 Ω 1V line: 67Ω (15W), 2 kω (5W), 3.3 kω (3W), 1 kω (1W) 7V line: 33Ω (15W), 67Ω (7.5W), 2 kω (2.5W), 3.3 kω (1.5W), 1 kω (.5W) Sensitivity 87 db (1W, 1m) at installation in 1/2 free sound field Frequency Response 85 2, Hz, -1 db at installation in 1/2 free sound field Crossover Frequency 5 khz Directivity Angle Horizontal: 9º, Vertical: 9º Speaker Component Low frequency: 1 cm (4") cone-type High frequency: Balanced dome tweeter Input Terminal Push-in terminal Water Protection IPX4 Operating Temperature 1 C to +5 C (14 F to 122 F) Finish Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint, wall bracket:, wall bracket:, wall bracket:, wall bracket:, wall bracket:, wall bracket: Steel plate, t1.6, black, paint Steel plate, t1.6, white paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint Dimensions 13 (W) 22 (H) 131 (D) mm (5.12" 7.95" 5.16") Weight 1.8 kg (3.97 lb) (including the supplied brackets) 2 kg (4.41lb) (including the supplied brackets) Accessories Speaker bracket 1, 1, Wall bracket 1, Bracket fixing screw 1 set Speaker bracket 1, 1, Wall bracket 1, Bracket fixing screw 1 set, Terminal cover 1, Terminal cover mounting screw 4 Option Board hanger bracket: HY-BH1B Board hanger bracket: HY-BH1B Board hanger bracket: HY-BH1B Board hanger bracket: HY-BH1B Speaker mount bracket: YS-6B Ceiling mount bracket: HY-CM1B Ceiling mount bracket: HY-CM1W Ceiling mount bracket: HY-CM1B Ceiling mount bracket: HY-CM1W Cluster bracket: HY-CL1B Cluster bracket: HY-CL1B Cluster bracket: HY-CL1B Cluster bracket: HY-CL1B Recommended Subwoofer HB-1, FB-1, FB-1 * Note: Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities.

3 F-2 SERIES F-2B/W/BT/WT/BTWP/WTWP APPEARANCE AND DIMENSIONAL DIAGRAM 244 (9.61") 235 (9.25") 6 M5 (depth 14 (.55")) 5 (1.97") TERMINAL COVER USE (F-2BTWP/WTWP only) Input terminal Tapping screw 4 x 12 (accessory) Terminal cover (accessory) 373 (14.69") 5 (1.97") 76.2 (3") Speaker cable Bottom View 5 (1.97") 48 (1.89") Rear View 2 M5 (depth 14 (.55"))* *Hole plugs are pre-fitted into the holes at the factory. Before attaching the speaker mounting bracket to this side, remove them using a pointed tool. Rotally switch (F-2BT/WT/ BTWP/WTWP only) Bushing* * Screwed onto the Terminal cover at the factory. [Stripped conductor] 1mm 3mm Notes For the speaker cable, use a cable with a diameter of 6 1 mm, which will fit the cable bushing. To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and tighten the bushing on the cover. WALL BRACKET AND JOINT BRACKET MOUNTING Wall bracket mounting Vertical installation Horizontal: Max. 7, Horizontal installation Horizontal: Max., Hexagon bolt M6 x 12 (with plain washer and spring washer) Wall bracket mounting 4-ø6mm Horizontal speaker mounting (indoor installation only) Fixing bolt M6 x 85 4-ø6mm Fixing bolt M6 x 85 Speaker bracket SPECIFICATIONS Model No. F-2B F-2W F-2BT F-2WT F-2BTWP* F-2WTWP* Enclosure Type Bass-reflex type Power Handling Capacity 6 W (continuous pink noise) 18 W (continuous program) Rated Input 6 W Rated Impedance 8 Ω 1V line: 17Ω (6W), 33 Ω (3W), 67 Ω (15W), 3.3 kω (3W) 7V line: 83Ω (6W), 17Ω (3W), 33 Ω (15W), 67 Ω (7.5W), 3.3 kω (1.5W) Sensitivity 92 db (1W, 1m) at installation in 1/2 free sound field 93 db (1W, 1m) at installation in 1/2 free sound field (with horn adapter) Frequency Response 65-2, Hz, -1 db at installation in 1/2 free sound field Crossover Frequency 2.5 khz Directivity Angle Horizontal: 11º, Vertical: 1º Horizontal: 8º, Vertical: 8º (with horn adapter) Speaker Component Low frequency: 2 cm (8") cone-type High frequency: 25 mm (1") dome tweeter Input Terminal Push-in terminal Water Protection IPX4 Operating Temperature 1 C to +5 C (14 F to 122 F) Finish Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white Enclosure: HIPS resin, black Enclosure: HIPS resin, white Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated Punched net: Surface-treated steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint steel plate, black, paint steel plate, white, paint, wall bracket:, wall bracket:, wall bracket:, wall bracket:, wall bracket:, wall bracket: Steel plate, t1.6, black, paint Steel plate, t1.6, white paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint Steel plate, t1.6, black, paint Steel plate, t1.6, white, paint Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast Speaker bracket: Die-cast aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint aluminum, black, paint aluminum, white, paint Dimensions 244 (W) 373 (H) 235 (D) mm (9.61" 14.69" 9.25") Weight 6.5 kg (14.33 lb) (including the supplied brackets) 7.4 kg (16.31lb) (including the supplied brackets) Accessories Speaker bracket 1, 1, Wall bracket 1, Speaker bracket 1, 1, Wall bracket 1, Bracket fixing screw 1 set, Bracket fixing screw 1 set, Horn adapter x 1, Horn adapter mounting screw x 4 Horn adapter x 1, Horn adapter mounting screw x 4, Terminal cover x 1,Terminal cover mounting screw 4 Option Ceiling mount bracket: HY-CM2B Ceiling mount bracket: HY-CM2W Ceiling mount bracket: HY-CM2B Ceiling mount bracket: HY-CM2W Speaker mount bracket: SP-131, YS-6B Cluster bracket: HY-CL2B Cluster bracket: HY-CL2B Cluster bracket: HY-CL2B Cluster bracket: HY-CL2B Recommended Subwoofer FB-1, FB-12B/W * Note: Avoid installing the speaker in locations close to the seashore or in indoor swimming facilities.

4 F-1 SERIES CHARACTERISTIC DIAGRAMS Polar Response horizontal vertical Hz 18 4Hz Hz 18 8Hz 63Hz Hz 18 4Hz Hz 18 8Hz 63Hz Hz 18 16Hz 125Hz Hz 18 25Hz Hz 18 16Hz 125Hz Hz 18 25Hz Hz 18 63Hz 5Hz Hz Hz 1Hz Hz 18 63Hz 5Hz Hz Hz 1Hz SPL vs. Frequency 11 1 without HF Horn Adapter SPL vs. Frequency 11 with HF Horn Adapter SPL vs. Frequency SPL (db) SPL (db) SPL (db) k 5k 1k 2k Phase vs. Frequency k 5k 1k 2k Phase vs. Frequency k 5k 1k 2k Phase vs. Frequency 18 Phase (deg) -9 Phase (deg) 9-9 Phase (deg) 9-9 Impedance (ohm) k 5k 1k 2k Impedance vs. Frequency Impedance (ohm) k 5k 1k 2k Impedance vs. Frequency Impedance (ohm) k 5k 1k 2k Impedance vs. Frequency k 5k 1k 2k Beamwidth vs. Frequency k 5k 1k 2k Beamwidth vs. Frequency k 5k 1k 2k Beamwidth vs. Frequency Beamwidth (deg) 1 5 Beamwidth (deg) 1 5 Beamwidth (deg) k 5k 1k 2k k 5k 1k 2k k 5k 1k 2k Hor. Ver. Hor. Ver. Hor. Ver.

5 F-2 SERIES CHARACTERISTIC DIAGRAMS horizontal vertical Polar Response horizontal vertical Polar Response with HF Horn Adapter Hz 125Hz 1Hz Hz 25Hz Hz 63Hz 5Hz Hz 16Hz 125Hz Hz 8Hz 63Hz Hz 4Hz 16Hz 125Hz 1Hz 4Hz 25Hz 8Hz 63Hz 5Hz 2Hz 16Hz 125Hz 5Hz 4Hz Hz 8Hz 63Hz Hz 125Hz 1Hz Hz 25Hz Hz 63Hz 5Hz Hz 16Hz 125Hz Hz 8Hz 63Hz Hz 4Hz without HF Horn Adapter Hz 125Hz 1Hz Hz 25Hz Hz 63Hz 5Hz Hz 16Hz 125Hz Hz 8Hz 63Hz Hz 4Hz

6 25 (.98") 25 (.98") 2 (.79") 1 (3.94") 2 (.79") 1 (3.94") 3 3 (.12") 3 (.12") OPTIONAL BRACKETS 5 (.2") 3 (1.18") 34.2 (1.35") 1 (.39") 15 (.59") 135 (5.31") 1 (.39") 4 32 (1.26") CLUSTER BRACKET HY-CL1B HY-CL2B For F-1 Series HY-CL1B Finish: Steel plate, black, paint Dimensions: 19.3 (W) 39 (H) 19.3 (D)mm (4.3" 1.54" 4.3") Weight: 38g (.84 lb) 68 (2.68") 19 (4.3") 8 ø5.8 (ø.23") (suspension hole) ø9.8 (ø.39") 68 (2.68") 19 (4.3") 16 M5 172 (6.77") (8.4") 12 ø5.8 (ø.23") (suspension hole) 172 (6.77") (8.4") HY-CL2B For F-2 Series Finish: Steel plate, black, paint Dimensions: (W) 71 (H) (D)mm (8.4" 2.8" 8.4") Weight: 1.2kg (2.65 lb) 3 (1.18") 25 (.98") 39 (1.54") ø9.8 (ø.39") 11 (4.33") 16 M5 16 ø4.8 (ø.19") 6.7 (2.64") 71 (2.8") CEILING MOUNT BRACKET For F-1 Series HY-CM1B/W Finish: Steel plate, black, paint (HY-CM1W: white, paint) Dimensions: 48 (W) 1 (H) 18 (D)mm (1.89" 3.94" 4.25") Weight: 21g (.46 lb) 9.8 X 41.8 (.39" X 1.65") 6.4 (.25") For F-2 Series HY-CM2B/W Finish: Steel plate, black, paint (HY-CM2W: white, paint) Dimensions: 84 (W) 135 (H) 175 (D)mm (3.31" 5.31" 6.89") Weight: 61g (1.34 lb) 7.2 (2.85") 6.3 (.25") ø9.8 (ø.39") 6.3 (.25") (1.89") ø7 (ø2.76") 18 (4.25") ø4 (ø1.57") ø12 (ø4.72") 175 (6.89") ø9.8 (ø.39") ø9.8 (ø.39") 4 M5 4 M5 3 (1.18") 3 (.12") 84 (3.31") Bottom View BOARD HANGER BRACKET POLE MOUNT BRACKET A 17 (.67") For F-1 Series HY-BH1B Finish: Steel plate, black, paint Dimensions: 48 (W) 1 (H) 18 (D)mm (1.89" 3.94" 4.25") (excluding knob bolt) Weight: 21g (.46 lb) 9.8 (.39") ø5 (ø1.97") 12 (47.24") YS-6B Applicable Pole: Approx. ø9 (ø3.5") to ø34 (ø13.4") mm Finish: Electroless zinc-plated Weight: 36g (.79lb.) (per band) Product Composition: Mounting band x 2 25 (.98") A' 14 (.55") 11 (.43") 1.2 (.5") 12 (.47") 25 (.98") A A' M1 11 (4.33") 6 (2.36") 31 (1.22") 37 (1.46") 32 (1.26") 29 (1.14") 2 M8 48 (1.89") 18 (4.25") 22 (.87") 4 (1.57") [Knob bolt] 19 (.75") 115 (4.53") 37 (1.46") 11 (.43") 1.2 (.5") 51 (2.1") 48.6 (1.91") ø4 (ø.16")* (sliding bracket fixing screw) M5 (1.18") ø9.8 (ø.39") [Hanger bracket] 48 (1.89") [Sliding bracket] *When protection against falls is required: Fix the sliding bracket directly to the partition board using screws. Note the at the fixing screws are not supplied. SP-131* Finish: Weight: Bracket: Stainless (SUS34) Bolt, nut, washer: Stainless 33 g (.73 lb.) (per bracket) * 2 units in set R9 136 (5.35") 4 (1.57") 3 (1.18") 56 (2.2") TOA Corporation http// Specifications are subject to change without notice. Printed in Japan (73) u