ELECTROMAGNETIC MODELLING OF ARTIFICIAL PACEMAKER. Emelia Anak Gunggu

Size: px
Start display at page:

Download "ELECTROMAGNETIC MODELLING OF ARTIFICIAL PACEMAKER. Emelia Anak Gunggu"

Transcription

1 ELECTROMAGNETIC MODELLING OF ARTIFICIAL PACEMAKER Emelia Anak Gunggu Bachelor of Engineering with Honours (Electronics and Telecommunication Engineering) 2009

2 UNIVERSITI MALAYSIA SARAWAK R13a BORANG PENGESAHAN STATUS TESIS Judul: ELECTROMAGNETIC MODELLING OF ARTIFICIAL PACEMAKER SESI PENGAJIAN: 2008/2009 Saya EMELIA ANAK GUNGGU (HURUF BESAR) mengaku membenarkan tesis * ini disimpan di Pusat Khidmat Maklumat Akademik, Universiti Malaysia Sarawak dengan syarat-syarat kegunaan seperti berikut: 1. Tesis adalah hakmilik Universiti Malaysia Sarawak. 2. Pusat Khidmat Maklumat Akademik, Universiti Malaysia Sarawak dibenarkan membuat salinan untuk tujuan pengajian sahaja. 3. Membuat pendigitan untuk membangunkan Pangkalan Data Kandungan Tempatan. 4. Pusat Khidmat Maklumat Akademik, Universiti Malaysia Sarawak dibenarkan membuat salinan tesis ini sebagai bahan pertukaran antara institusi pengajian tinggi. 5. ** Sila tandakan ( a ) di kotak yang berkenaan SULIT TERHAD (Mengandungi maklumat yang berdarjah keselamatan atau kepentingan Malaysia seperti yang termaktub di dalam AKTA RAHSIA RASMI 1972). (Mengandungi maklumat TERHAD yang telah ditentukan oleh organisasi/ badan di mana penyelidikan dijalankan). a TIDAK TERHAD Disahkan oleh (TANDATANGAN PENULIS) (TANDATANGAN PENYELIA) Alamat tetap: LOT 952, NO.21 KAMPUNG MERDANG LUMUT, KOTA SAMARAHAN MISS SHAFRIDA BINTI SAHRANI Nama Penyelia Tarikh: Tarikh: CATATAN * Tesis dimaksudkan sebagai tesis bagi Ijazah Doktor Falsafah, Sarjana dan Sarjana Muda. ** Jika tesis ini SULIT atau TERHAD, sila lampirkan surat daripada pihak berkuasa/organisasi berkenaan dengan menyatakan sekali sebab dan tempoh tesis ini perlu dikelaskan sebagai SULIT dan TERHAD.

3 ELECTROMAGNETIC MODELLING OF ARTIFICIAL PACEMAKER EMELIA ANAK GUNGGU This project is submitted to Faculty of Engineering, Universiti Malaysia Sarawak in partial fulfilment of the requirements for the degree of Bachelor of Engineering with Honours (Electronics and Telecommunication Engineering) 2009 Faculty of Engineering UNIVERSITI MALAYSIA SARAWAK 2008/2009

4

5 This Final Year Project attached here: Title : Electromagnetic Modelling of Artificial Pacemaker Student Name : Emelia Anak Gunggu Matric No : has been read and approved by: Miss Shafrida Binti Sahrani Date (Supervisor)

6 Dedicated to my beloved family ii

7 ACKNOWLEDGEMENT A note of appreciation to my Final Year Project s supervisor, Miss Shafrida Binti Sahrani for her patience, advices, comments and guidance in order for me to accomplish this thesis. Last but not least, I would like to thank my family and friends for their love, support and companion that had helped me to gone through those hard days of my student s life. iii

8 ABSTRAK Pacemaker tiruan diimplan ke dalam tubuh seseorang yang mengalami degupan jantung yang lemah. Ia mengantikan fungsi pacemaker dengan mengawal kelemahan dengupan jantung. Alat elektronik yang kecil itu mengandungi sistem lead electrode, pacemaker dan connector. Operasi telefon bimbit menghasilkan kesan elektromagnetik (EM) pada peralatan elektronik yang lain kerana Radio Frekuensi (RF) yang dimilikinya. Pendedahan elektromagnetik yang berlebihan ke atas pacemaker tiruan mungkin akan menyebabkannya gagal berfungsi, ketidakselesaan dan kesakitan kepada penggunanya. Bagi menilai darjah interferen elektromagnetik pada pacemaker yang dihasilkan oleh sumber EM seperti telefon bimbit, adalah lebih baik untuk memahami operasi pacemaker dan litarnya terlebih dahulu. Justeru itu, kajian ini dilakukan untuk membentuk model EM bagi pacemaker tiruan dan mengira radiasi impedance, yang diinduksikan oleh sumber voltan dan juga voltan dan arus interferen yang terhasil pada connector pacemaker. Simulasi keputusan yang diperoleh daripada pemprogramman dalam perisian Microsoft Visual C++, digunakan untuk menganalisis model pacemaker ketika kapasitor pacemaker dicas dan dinyahcaskan. Proses pengecasan dan penyahcasan kapasitor pacemaker yang berterusan, menggalakan denyutan jantung. iv

9 ABSTRACT Artificial pacemaker is implanted into the body of one whom encounters heart beat failure. It replaces the function of heart pacemaker by controlling heart beat ineffability. The tiny electronic device consists of the lead electrode system, pacemaker itself and connector. The operation of mobile phone produces electromagnetic effects to other electronic devices due to its Radio Frequency (RF). Excessive exposure of electromagnetic (EM) on the artificial pacemaker may cause failure to it and discomfort and illness to its user. In order to evaluate the degree of electromagnetic interference (EMI) on the pacemaker due to EM source such as mobile phone, it is best to understand the operation of pacemaker and its circuitry. Hence, this research is carried out to develop EM modeling of an artificial heart pacemaker and to determine the radiation impedance, induced by the source voltage and also the interference voltage and current which exist at the connector of the pacemaker. Simulated results obtain from programming in Microsoft Visual C++ is used to analyze the EM modeling of artificial pacemaker when the capacitor of the pacemaker is charging and discharging. As the continuous process of charging and discharging of pacemaker s capacitor will stimulate the heart beat of the user. v

10 TABLE OF CONTENTS Pages Dedication Acknowledgement Abstrak Abstract List of Tables List of Figures ii iii iv v x xi Chapter 1 INTRODUCTION Project Objectives 1.2 Statements of Problems 1.3 Project Approach 1.4 Expected Outcomes and Contributions 1.5 Project Outlines Chapter 2 LITERATURE REVIEW 2.1 Pacemaker 2.2 Advantages of Pacemaker 2.3 Pacemaker and Surroundings Home Appliances vi

11 2.3.2 Cell Phones The Pacemaker and Medical 8 8 Equipment 2.4 Material Characteristics for each 9 Pacemaker Component Casing of Pacemaker Electrode Lead Body Steroid Eluting Lead Fixation Mechanism Connector Pin 2.5 Pacing Impedance of Pacemaker Chapter 3 METHODOLOGY Pacemaker Electromagnetic (EM) 14 Modelling Configuration Process 3.2 Introduction to Maxwell s Equations and 15 the Yee Algorithm 3.3 Maxwell s Equation in Three Dimension 15 (3D) 3.4 Maxwell s Equation in Two Dimension 18 (2D) TMz Mode 19 vii

12 3.5 Yee Algorithm Yee s Algorithm for Two Dimensional TMz 3.6 Cartesian Grids 3.7 Analytical Absorbing Boundary Conditions (ABCs) Partial Differential Equations Taylor Series Approximations Mur Finite-Difference Scheme 3.8 Electromagnetic Modelling of Artificial Pacemaker 3.9 Program Flow Chart Charging of Capacitor Discharging of Capacitor Chapter 4 RESULTS, ANALYSIS & DISCUSSIONS 4.1 Charging of EM Modelling of Artificial 38 Heart Pacemaker Charging Impedance Radiation Interference Voltage and Current of Charging Pacemaker EM Modelling Conclusion of Charging EM 44 viii

13 Modelling of Pacemaker 4.2 Discharging of EM Modelling of 45 Artificial Heart Pacemaker Radiation Impedance of 48 Discharging Capacitor Interference Voltage and Current 48 of Discharging Pacemaker EM Modelling Conclusion Discharging EM 50 Modelling of Pacemaker Chapter 5 CONCLUSION AND RECOMMENDATIONS 5.1 Conclusion 5.2 Problems Encountered 5.3 Recommendations REFERENCES 55 APPENDIX A 58 APPENDIX B 59 ix

14 LIST OF TABLES Table Page 4.1 Results of pacemaker charging capacitor Results of discharging capacitor 41 x

15 LIST OF FIGURES Figure Page 2.1 Location of Pacemaker Components of Pacemaker Current flows through the lead of pacemaker Basic circuitry of a pacemaker Position of the electric and magnetic field vector components 20 about a cubic unit cell of the Yee space lattice. 3.2 Space-time chart of Yee algorithm for a one dimensional (1D) 21 wave propagation. (Initial conditions for both electric and magnetic fields are zero, everywhere in the grid) 3.3 Two Cartesian grids that are alternatives to Yee s algorithm 24 (illustrated in two dimensions for the TM z case) 3.4 Two-dimensional Cartesian computational domain Ω 27 showing the outer domain boundary Ω at which an ABC is implemented to simulate the extension of the grid to infinity 3.6 Circuitry of artificial pacemaker Flow chart of program in C++ Software Circuit of charging artificial pacemaker Discharging circuit of artificial pacemaker 37 xi

16 4.1 Capacitor charging of pacemaker EM modelling Graph of pacemaker EM modelling charging voltage with time Graph of pacemaker EM modelling charging current with time Graph of radiation impedance with time when the pacemaker EM 42 modelling is charging 4.5 Graph of interference voltage with time when the pacemaker EM 43 modelling is charging 4.6 Graph of interference current with time when the pacemaker EM 44 modelling is charging 4.7 Discharging capacitor of pacemaker EM modelling Graph of capacitor discharging voltage with time Graph of capacitor discharging current with time Graph of radiation impedance with time for the pacemaker 48 discharging capacitor 4.11 Graph of interference voltage with time for pacemaker discharging 49 capacitor 4.12 Graph of interference current with time for pacemaker discharging 49 capacitor xii

17 CHAPTER 1 INTRODUCTION Broad application of microwave and radio frequency (RF) devices such as in telecommunication, radio, radar and biomedical is due to today s rapid development of electronics industry. The risk of microwave and RF devices to human health and other electronics devices is questioned through out the study of electromagnetic radiation (EMR) and human health. Ability of using mobile phone at wide coverage, timelessly led to its necessary used in daily life. Attached or integrated antenna in the mobile phone produced RF exposure through its transmission and reception data. Excessive exposure to RF fields can caused adverse health consequences while the electromagnetic interference (EMI) due to RF energy may cause malfunction to electronics devices such as implanted pacemaker. EMI level from mobile phone towards the implanted pacemaker depend on the strength of the electromagnetic field, duration of exposure, frequency of the source and distance. Malfunction of implanted pacemaker can caused irritation, discomfort and illness to its user. 1

18 1.1 Project Objectives This research is done to develop the EM modelling of an artificial heart pacemaker due to its exposure to electromagnetic (EM) field i.e. exhibited by mobile phone. Based on the modelling of artificial heart pacemaker, the radiation impedance, the level of voltage and current interference are determined. 1.2 Statement of Problems Contraction between electromagnetic source i.e. mobile phone with implanted pacemaker may caused interference to the pacemaker. For a better understanding on the pacemaker operation, the modelling of artificial pacemaker need to be develop to calculate the radiation impedance, the level of voltage and current interference of the pacemaker. In order to determine the degree of electromagnetic interference of the pacemaker it is suggested to implement FDTD method. 1.3 Project Approach The electromagnetic radiation (EMR) on the pacemaker is calculated based on the formulas develop from the modeling of artificial pacemaker. Simulation results are obtained from the programming in Microsoft Visual 6.0 C++ software. 2

19 1.4 Expected Outcomes and Contributions The modelling of the pacemaker is expected to be developed, which can be implemented to determine the radiation impedance at the connector of the pacemaker and as well the voltage and current interference due to electromagnetic field. 1.5 Project Outlines Chapter 1 is the introduction which plainly describes the effects of mobile phone towards the implanted pacemaker operation. Project objective, project approaches, expected outcomes and contributions and also project outlines is included in the chapter. The overall system of implanted pacemaker, its advantages to human health is written in Chapter 2 Literature Review. User of implanted pacemaker is advisable to keep distance from electric and magnetic sources, to avoid interruption to the pacemaker. Hence, in this chapter explanation is carried out on the types of electromagnetic (EM) sources and surroundings, implanted pacemaker s users should avoid. The characteristics of material for each of the implanted pacemaker component are also described. Moreover, the pacing impedance of the pacemaker is being explained on this chapter. The suggested approach to develop this research is briefly discussed in Chapter 3 Methodology. Finite-difference time-domain (FDTD) method is used to obtain the EMI level of the mobile phone towards the pacemaker. Related equations and algorithm is 3

20 written for better understanding of the method which includes Taylor s series, Maxwell s equations, Yee s algorithm, transverse magnetic mode in z-direction for twodimension (TM Z ). Meanwhile, the EM modelling of the pacemaker when it is being charged and discharged is being discussed in order to evaluate the radiation impedance (Z R ), the level of voltage (V I ) and current interference (I I ) of the pacemaker with time. Result of the research is included in Chapter 4 and as well analysis and discussion for the results. The results consist of graphs of radiation impedance (Z R ), voltage and current interference (V I and I I ) when the capacitor of pacemaker modelling is in the state of charge and discharge. The last chapter (Chapter 5), conclude the outcomes of the research and recommendations is added for future reference. Problems encounter in the process of accomplishing this project is also being explained. 4

21 CHAPTER 2 LITERATURE REVIEW This chapter describes what is pacemaker, advantages of pacemaker, pacemaker and surroundings and material characteristics for each pacemaker components. Moreover, the basic concept of pacemaker circuitry is being explained in this chapter. 2.1 Pacemaker Figure 2.1: Location of pacemaker [1] 5

22 Inappropriate heart rate can be normalized by implanting a small batteryoperated device underneath the skin near the shoulder of cardiovascular patients which is known as artificial pacemaker. This device utilizes electrical impulses transported by electrodes which contacting the heart muscle, to regulate the beating of the heart. The weight of a pacemaker is about 20 to 50 grams [2]. It is implanted under the collar bone and consists of one or more leads which are located into the heart via a vein. There are three types of pacemakers which are single-chamber pacemaker, dual-chamber pacemaker and biventricular pacemaker, at which they differ in numbers of lead. Single-chamber pacemaker contains one lead which is implanted either in atrium or ventricle, depends on the cause and nature of Bradycardia. The single-chamber pacemaker receives signals from and pace only the specified area (ventricle or atrium). However for dual-chamber, it consists of two leads which pace both atrium and ventricle. It coordinates the signals and contractions of the atria and ventricles for efficient function. Moreover, biventricular pacemaker owns three leads where one in the right atrium, one placed in the right ventricle, and one placed in the left ventricle via the coronary sinus vein. 6

23 2.2 Advantages of Pacemaker In order to carries oxygen and nourish our cells, our heart pumps bloods to the cells of our body. The heart beats due to electrical impulses generate by sinus node or sinoatrial (the heart s natural pacemaker). Disease or age related process; can cause one to suffer Bradycardia, rhythm disorders- problems in the conduction system or possible blockage of the pathways [1]. However by the implantation of artificial pacemaker on the body of Bradycardia patients, they will no longer encounter rhythmic pace disorder anymore. When the body s demand could not conduct an amount of oxygen to body, it can caused dizziness, extreme fatigue, shortness of breath, confusion or fainting and etc, which are symptoms of abnormal heart beat. This sickness can be reduce and ended by implantation of artificial pacemaker. 2.3 Pacemaker and Surroundings One who is wearing an artificial pacemaker must be alert to his surroundings and electronic devices in order to avoid interference on the pulse generator of pacemaker 7

24 2.2.1 Home appliances Electric shavers, microwave ovens, vacuum cleaners, radios and televisions do not affect pacemaker pulse generator by altering the pacing rates. However, power generator, arc welding equipment and powerful magnets as in medical devices, heavy equipment or motor can inhibit pulse generators Cell phones Digital cellular phones can interfere with pacemaker [3]. Hence, it is advisable that the users of pacemaker placed there cellular phone held their phone opposite from the side of pacemaker and do not carry the phone in the pocket near their chest The Pacemaker and medical equipment Magnetic Resonance Imaging (MRI scan) can interfere the pacing and inhibit the output of pacemaker as it apply strong magnetic field in order to produce the images of internal organs and functions. Hence, the users of pacemaker should not carryout MRI scanning without discussion with doctor. Diagnostic scanning (such as X-ray) does not totally inhibit pacemaker output. But therapeutic radiation which is for threatening cancerous tumors can damage the pacemaker s circuit. Adversely, dental equipment does not effect pacemaker operation. For most users of pacemaker, Extracorporeal Shock-Wave Lithotripsy (ESWL) to dissolve kidney stone is a safe treatment with some reprogramming of the pacing. But patients with certain kinds of pacemaker implanted in 8

BORANG PENGESAHAN STATUS TESIS

BORANG PENGESAHAN STATUS TESIS UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: RFID BASED SYSTEMATIC STUDENT S ATTENDANCE MANAGEMENT SYSTEM SESI PENGAJIAN: 2010/2011 Saya HANISAH BT HAMID ( 860210-02-5274 ) (HURUF BESAR)

More information

DEVELOPMENT OF VENDING MACHINE WITH PREPAID PAYMENT METHOD AMAR SAFUAN BIN ALYUSI

DEVELOPMENT OF VENDING MACHINE WITH PREPAID PAYMENT METHOD AMAR SAFUAN BIN ALYUSI DEVELOPMENT OF VENDING MACHINE WITH PREPAID PAYMENT METHOD AMAR SAFUAN BIN ALYUSI Report submitted in partial fulfilment of the requirements for the award of the degree of Bachelor of Mechanical Engineering

More information

BORANG PENGESAHAN STATUS TESIS

BORANG PENGESAHAN STATUS TESIS UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: MODAL ANALYSIS OF CAR DISC BRAKE SESI PENGAJIAN: 2010/2011 Saya AHMAD ZAKI BIN CHE ZAINOL ARIFF (871228-11-5749) (HURUF BESAR) mengaku membenarkan

More information

DESIGN ANALYSIS OF EXTERIOR CAR BODY PART BASTIAN WIBAR BIN MOMANG

DESIGN ANALYSIS OF EXTERIOR CAR BODY PART BASTIAN WIBAR BIN MOMANG DESIGN ANALYSIS OF EXTERIOR CAR BODY PART BASTIAN WIBAR BIN MOMANG Thesis submitted in partial fulfillment of the requirements for award of Bachelor of Mechanical Engineering with Automotive Engineering

More information

UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS

UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL: AUTOMATIC TEMPERATURE CONTROL SYSTEM FOR AQUAPONIC GREEN HOUSE SESI PENGAJIAN: 2012/2013 Saya, AMIN KHAIRI BIN ROSLI (890214-01-5839) (HURUF

More information

VIDEO DISTORTION MEASUREMENT USING PSNR IN WAVELET DOMAIN MOK YUNG LENG

VIDEO DISTORTION MEASUREMENT USING PSNR IN WAVELET DOMAIN MOK YUNG LENG VIDEO DISTORTION MEASUREMENT USING PSNR IN WAVELET DOMAIN MOK YUNG LENG Bachelor of Engineering with Honors (Electronics & Computer Engineering) 2009/2010 UNIVERSITI MALAYSIA SARAWAK R13a BORANG PENGESAHAN

More information

PREDICTION OF SURFACE ROUGHNESS IN TURNING OPERATION OF LOW CARBON STEEL AISI 1018 FAKHRUR RAZI BIN BAHRIN UNIVERSITI MALAYSIA PAHANG

PREDICTION OF SURFACE ROUGHNESS IN TURNING OPERATION OF LOW CARBON STEEL AISI 1018 FAKHRUR RAZI BIN BAHRIN UNIVERSITI MALAYSIA PAHANG PREDICTION OF SURFACE ROUGHNESS IN TURNING OPERATION OF LOW CARBON STEEL AISI 1018 FAKHRUR RAZI BIN BAHRIN UNIVERSITI MALAYSIA PAHANG ii UNIVERSITI MALAYSIA PAHANG BORANG PENGESAHAN STATUS TESIS JUDUL:

More information

Study of Distributed Coordination Function (DCF) and Enhanced DCF (EDCF) in IEEE MAC Protocols for Multimedia Applications.

Study of Distributed Coordination Function (DCF) and Enhanced DCF (EDCF) in IEEE MAC Protocols for Multimedia Applications. Study of Distributed Coordination Function (DCF) and Enhanced DCF (EDCF) in IEEE 802.11 MAC Protocols for Multimedia Applications Chan Chen Hoong Bachelor of Engineering with Honors (Electronics & Computer

More information

Performance of Real Time Traffic In The Ethernet And WLAN Using TCP And UDP Protocols. Punitha Subbramaniam

Performance of Real Time Traffic In The Ethernet And WLAN Using TCP And UDP Protocols. Punitha Subbramaniam Performance of Real Time Traffic In The Ethernet And WLAN Using TCP And UDP Protocols. Punitha Subbramaniam Bachelor of Engineering with Honors (Electronics & Telecommunications Engineering) 2009/2010

More information

TUITION CENTRE MANAGEMENT SYSTEM (TCMS) ZARIFAH BINTI MOHD PAHMI UNIVERSITI TEKNIKAL MALAYSIA MELAKA

TUITION CENTRE MANAGEMENT SYSTEM (TCMS) ZARIFAH BINTI MOHD PAHMI UNIVERSITI TEKNIKAL MALAYSIA MELAKA TUITION CENTRE MANAGEMENT SYSTEM (TCMS) ZARIFAH BINTI MOHD PAHMI UNIVERSITI TEKNIKAL MALAYSIA MELAKA TUITION CENTRE MANAGEMENT SYSTEM (TCMS) ZARIFAH BINTI MOHD PAHMI This report is submitted in partial

More information

BORANG PENGESAHAN STATUS TESIS

BORANG PENGESAHAN STATUS TESIS BORANG PENGESAHAN STATUS TESIS JUDUL: Network Analysis and Design at Universiti Teknologi Mara (UiTM) Lendu, Melaka and Implementation Using OPNET Modeler SESI PENGAJIAN: 200712008 Saya NUR AZNIDA BINTI

More information

BORANG PENGESAHAN STATUS TESIS* TERHAD (Mengandungi maklumat TERHAD yang telah ditentukan oleh organisasi/badan di mana penyelidikan dijalankan)

BORANG PENGESAHAN STATUS TESIS* TERHAD (Mengandungi maklumat TERHAD yang telah ditentukan oleh organisasi/badan di mana penyelidikan dijalankan) BORANG PENGESAHAN STATUS TESIS* JUDUL: ONLINE BASED SIGNATURE VERIFICATION TOOLS SESI PENGAJIAN: _2012 / 2013 Saya TANG HAN YANG. (HURUF BESAR) mengaku membenarkan tesis Projek Sarjana Muda ini disimpan

More information

SYSTEM MANAGEMENT AQIQAH AND QURBAN ONLINE (SMAQO)

SYSTEM MANAGEMENT AQIQAH AND QURBAN ONLINE (SMAQO) SYSTEM MANAGEMENT AQIQAH AND QURBAN ONLINE (SMAQO) UNIVERSITI TEKNIKAL MALAYSIA MELAKA BORANG PENGESAHAN STATUS TESIS* JUDUL: SYSTEM MANAGEMENT AOIOAH AND OURBAN ONLINE SESI PENGAJIAN: 20091200 10 Saya

More information

WEB-BASED DEVICE CONTROL AND COMMUNICATION VIA PARALLEL PORT MOHD RASHDAN BIN ABD RAHMAN UNIVERSITI TEKNIKAL MALAYSIA MELAKA

WEB-BASED DEVICE CONTROL AND COMMUNICATION VIA PARALLEL PORT MOHD RASHDAN BIN ABD RAHMAN UNIVERSITI TEKNIKAL MALAYSIA MELAKA WEB-BASED DEVICE CONTROL AND COMMUNICATION VIA PARALLEL PORT MOHD RASHDAN BIN ABD RAHMAN UNIVERSITI TEKNIKAL MALAYSIA MELAKA BORANG PENGESAHAN STATUS TESIS JUDUL: WEB-BASED DEVICE CONTROL AND COMMUNICATION

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA COMPARISON STUDY OF PRESS PART QUALITY INSPECTION SYSTEM: CHECKING FIXTURE AND FARO ARM LASER SCANNER This report submitted in accordance with requirement of the Universiti

More information

90(111H7. AND 1800i1H7. MOBILE PHONE SI1Il'LATION WITH HVNIAN HEAD ANI) HAND 11ODEl.

90(111H7. AND 1800i1H7. MOBILE PHONE SI1Il'LATION WITH HVNIAN HEAD ANI) HAND 11ODEl. 90(111H7. AND 1800i1H7. MOBILE PHONE SI1Il'LATION WITH HVNIAN HEAD ANI) HAND 11ODEl. Nasyitah bt Ahmad Kamal TK 6%4.4 Bachelor of Engineering with Honours C45 (Electronics & Telecommunication Engineering)

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA WIRELESS CENTRALIZED ACCESS SMART HOME This report submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor s Degree

More information

HOME APPLIANCE CONTROL SYSTEM TAN WEI SYE

HOME APPLIANCE CONTROL SYSTEM TAN WEI SYE HOME APPLIANCE CONTROL SYSTEM TAN WEI SYE This report is submitted in partial fulfillment of the requirements for award of Bachelor of Electronic Engineering (Computer Engineering) with honors Faculty

More information

THE DEVELOPMENT OF MODULAR PRODUCT DESIGN: FOLDABLE CHAIR

THE DEVELOPMENT OF MODULAR PRODUCT DESIGN: FOLDABLE CHAIR UNIVERSITI TEKNIKAL MELAKA MALAYSIA THE DEVELOPMENT OF MODULAR PRODUCT DESIGN: FOLDABLE CHAIR Thesis submitted in accordance with the requirements of the Malaysia Technical University of Malacca for the

More information

UNIVERSITI TEKNOLOGI MALAYSIA

UNIVERSITI TEKNOLOGI MALAYSIA PSZ 19:16 (Pind. 1/97) UNIVERSITI TEKNOLOGI MALAYSIA BORANG PENGESAHAN STATUS TESIS JUDUL: DEVELOPMENT OF DATABASE MANAGEMENT SYSTEM (DBMS) BASED ON ELEMENTAL COST ANALYSIS (ECA) METHODOLOGY Saya SESI

More information

SMART PARKING SYSTEM USING LABVIEW MUHAMMAD NAZIR BIN MAT ISA

SMART PARKING SYSTEM USING LABVIEW MUHAMMAD NAZIR BIN MAT ISA SMART PARKING SYSTEM USING LABVIEW MUHAMMAD NAZIR BIN MAT ISA This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic Engineering (Industrial Electronics)

More information

BORANG PENGESAHAN STATUS TESIS*

BORANG PENGESAHAN STATUS TESIS* BORANG PENGESAHAN STATUS TESIS* JUDUL: NETWORK ANALYSIS AND DESIGN AT WISMA NEGERI SESI PENGAJIAN: II I 2008 Saya MOHO EZWAN BIN MD SAID mengaku membenarkan tesis (PSM/Sarjana/Doktor Falsafah) ini disimpan

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA HOME APPLIANCES WEB SWITCH CONTROL WIRELESSLY USING SMARTHPHONE This report is submitted in accordance with the requirement of Universiti Teknikal Malaysia Melaka (UTeM)

More information

COORDINATION PROTECTION SYSTEM IN INDUSTRIAL PLANTS AHMAD TARMIZI BIN MD NOR

COORDINATION PROTECTION SYSTEM IN INDUSTRIAL PLANTS AHMAD TARMIZI BIN MD NOR COORDINATION PROTECTION SYSTEM IN INDUSTRIAL PLANTS AHMAD TARMIZI BIN MD NOR This report is submitted in partial fulfillment of this requirement for the award of Bachelor of Electronic Engineering (Industrial

More information

SMART BODY MONITORING SYSTEM MOHAMAD KASYFUL AZIM BIN AHMAD

SMART BODY MONITORING SYSTEM MOHAMAD KASYFUL AZIM BIN AHMAD SMART BODY MONITORING SYSTEM MOHAMAD KASYFUL AZIM BIN AHMAD This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic Engineering (Computer Engineering)

More information

FORCE ANALYSIS ON ROBOTIC DEBURRING PROCESS

FORCE ANALYSIS ON ROBOTIC DEBURRING PROCESS UNIVERSITI TEKNIKAL MALAYSIA MELAKA (UTeM) FORCE ANALYSIS ON ROBOTIC DEBURRING PROCESS Thesis submitted in accordance with the partial requirements of the Universiti Teknikal Malaysia Melaka for the Bachelor

More information

AN ANDROID-BASED SMART SECURITY TOURING SYSTEM FOR REAL-TIME DATA RECORDING USING NFC, GPS AND GSM TECHNOLOGY.

AN ANDROID-BASED SMART SECURITY TOURING SYSTEM FOR REAL-TIME DATA RECORDING USING NFC, GPS AND GSM TECHNOLOGY. AN ANDROID-BASED SMART SECURITY TOURING SYSTEM FOR REAL-TIME DATA RECORDING USING NFC, GPS AND GSM TECHNOLOGY. DINESH A/L MANIYAM UNIVERSITI TEKNIKAL MALAYSIA MELAKA ii AN ANDROID-BASED SMART SECURITY

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA OPTIMIZATION OF MEASUREMENT PARAMETERS IN NON- CONTACT MEASURING SYSTEM

UNIVERSITI TEKNIKAL MALAYSIA MELAKA OPTIMIZATION OF MEASUREMENT PARAMETERS IN NON- CONTACT MEASURING SYSTEM UNIVERSITI TEKNIKAL MALAYSIA MELAKA OPTIMIZATION OF MEASUREMENT PARAMETERS IN NON- CONTACT MEASURING SYSTEM This report submitted in accordance with the requirement of the Universiti Teknikal Malaysia

More information

PROTOTYPE OF POWER LINE INTERFACE SOCKET USING EMBEDDED CONTROLLER FOR DATA ACQUISITION AND CONTROL. LAI CHING HUAT

PROTOTYPE OF POWER LINE INTERFACE SOCKET USING EMBEDDED CONTROLLER FOR DATA ACQUISITION AND CONTROL. LAI CHING HUAT i PROTOTYPE OF POWER LINE INTERFACE SOCKET USING EMBEDDED CONTROLLER FOR DATA ACQUISITION AND CONTROL. LAI CHING HUAT This Report Is Submitted In Partial Fulfillment of Requirements for the Bachelor Degree

More information

FINITE ELEMENT ANALYSIS OF SEEPAGE FLOW UNDER A SHEET PILE LOH LING PING

FINITE ELEMENT ANALYSIS OF SEEPAGE FLOW UNDER A SHEET PILE LOH LING PING FINITE ELEMENT ANALYSIS OF SEEPAGE FLOW UNDER A SHEET PILE LOH LING PING Bachelor of Engineering with Honours (Civil Engineering) 2006 Universiti Malaysia Sarawak Kota Samarahan BORANG PENYERAHAN TESIS

More information

REMOVING AL-QURAN ILLUMINATION AMIRUL RAMZANI BIN RADZID UNIVERSITI TEKNIKAL MALAYSIA MELAKA

REMOVING AL-QURAN ILLUMINATION AMIRUL RAMZANI BIN RADZID UNIVERSITI TEKNIKAL MALAYSIA MELAKA REMOVING AL-QURAN ILLUMINATION AMIRUL RAMZANI BIN RADZID UNIVERSITI TEKNIKAL MALAYSIA MELAKA BORANG PENGESAHAN STATUS TESIS JUDUL: REMOVING AL-QURAN ILLUMINATION _ SESI PENGAJIAN: 2014/2015 Saya AMIRUL

More information

PERFORMANCE ANALYSIS OF VIDEO TRANSMISSION OVER IEEE ARCHITECTURE NOOR HURUL-AIN BINTI MOHAMAD

PERFORMANCE ANALYSIS OF VIDEO TRANSMISSION OVER IEEE ARCHITECTURE NOOR HURUL-AIN BINTI MOHAMAD PERFORMANCE ANALYSIS OF VIDEO TRANSMISSION OVER IEEE 802.16 ARCHITECTURE NOOR HURUL-AIN BINTI MOHAMAD This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic

More information

ZIGBEE-BASED SMART HOME SYSTEM NURUL ILMI BINTI OMAR

ZIGBEE-BASED SMART HOME SYSTEM NURUL ILMI BINTI OMAR ZIGBEE-BASED SMART HOME SYSTEM NURUL ILMI BINTI OMAR This report is submitted in partial fulfillment of the requirement for the Bachelor Degree in Electronic Engineering (Wireless Communication) with Honors

More information

THE APPLICATION OF DIFFERETIAL BOX-COUNTING METHOD FOR IRIS RECOGNITION AHMAD AZFAR BIN MAHMAMI

THE APPLICATION OF DIFFERETIAL BOX-COUNTING METHOD FOR IRIS RECOGNITION AHMAD AZFAR BIN MAHMAMI i THE APPLICATION OF DIFFERETIAL BOX-COUNTING METHOD FOR IRIS RECOGNITION AHMAD AZFAR BIN MAHMAMI This Report Is Submitted In Partial Fulfillment of the Requirements for the Award Of Bachelor of Electronic

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA INTELLIGENT KEYCHAIN This report submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor s Degree in Electronics

More information

COMPARATIVE STUDY BETWEEN FEATURE EXTRACTION METHODS FOR FACE RECOGNITION

COMPARATIVE STUDY BETWEEN FEATURE EXTRACTION METHODS FOR FACE RECOGNITION COMPARATIVE STUDY BETWEEN FEATURE EXTRACTION METHODS FOR FACE RECOGNITION SITI FAIRUZ BINTI ABDULLAH UNIVERSITI TEKNIKAL MALAYSIA MELAKA JUDUL: BORANG PENGESAHAN STATUS TESIS* COMPARATIVE STUDY BETWEEN

More information

IMPLEMENTATION OF DIAMOND SEARCH (DS) ALGORITHM FOR MOTION ESTIMATION USING MATLAB SITI HAJAR BINTI AHMAD

IMPLEMENTATION OF DIAMOND SEARCH (DS) ALGORITHM FOR MOTION ESTIMATION USING MATLAB SITI HAJAR BINTI AHMAD IMPLEMENTATION OF DIAMOND SEARCH (DS) ALGORITHM FOR MOTION ESTIMATION USING MATLAB SITI HAJAR BINTI AHMAD This report is submitted in partial fulfillment of the requirements for the award of Bachelor of

More information

BORANG PENGESAHAN STATUS TESIS*

BORANG PENGESAHAN STATUS TESIS* BORANG PENGESAHAN STATUS TESIS* JUDUL: In_fi_ _n_eo_n D_i=~-it_a_l_L_ib_r_a_ry~ ---C_a_ta_l_o=~~in~~~------- SESI PENGAJIAN: 2011/ 2 0 1 2 Saya LEE KlAN SENG mengaku membenarkan tesis Projek Sarjana Muda

More information

NUR ZURAIN BT ZUBAIDI B

NUR ZURAIN BT ZUBAIDI B ANALYSIS COMPARISON BETWEEN SOLIDWORKS PLASTICS AND SIMULATION MOLDFLOW ADVISER OF OPTIMUM GATE SIZE FOR THE DESIGN OF A SINGLE CAVITY PLASTIC NAME CARD HOLDER MOLD NUR ZURAIN BT ZUBAIDI B051210038 UNIVERSITI

More information

SESSION BASED ACTIVITY MONITORING APPLICATION FOR ANDROID TAN LEIK HO

SESSION BASED ACTIVITY MONITORING APPLICATION FOR ANDROID TAN LEIK HO SESSION BASED ACTIVITY MONITORING APPLICATION FOR ANDROID TAN LEIK HO This report is submitted in partial fulfillment of requirements for the Bachelor Degree of Electronic Engineering (Industrial Electronics)

More information

PERFORMANCE EVALUATION OF LEACH PROTOCOL FOR WIRELESS SENSOR NETWORKS USING NS2 MUHAMAD FAIZ BIN RAMDZAN

PERFORMANCE EVALUATION OF LEACH PROTOCOL FOR WIRELESS SENSOR NETWORKS USING NS2 MUHAMAD FAIZ BIN RAMDZAN i PERFORMANCE EVALUATION OF LEACH PROTOCOL FOR WIRELESS SENSOR NETWORKS USING NS2 MUHAMAD FAIZ BIN RAMDZAN This report is submitted in partial fulfilment of requirements for the Bachelor Degree of Electronic

More information

HOME APPLIANCES MONITORING AND CONTROL USING SMARTPHONE APPLICATION AHMAD DANIAL BIN AHMAD NAZRI

HOME APPLIANCES MONITORING AND CONTROL USING SMARTPHONE APPLICATION AHMAD DANIAL BIN AHMAD NAZRI i HOME APPLIANCES MONITORING AND CONTROL USING SMARTPHONE APPLICATION AHMAD DANIAL BIN AHMAD NAZRI This Report Is Submitted In Partial Fulfillment Of Requirements For The Bachelor Degree of Electronic

More information

LOW COST MP3 PLAYER USING SD CARD KHAIRIL AMRI BIN MUHAMAD UNIVERSITI TEKNIKAL MALAYSIA MELAKA

LOW COST MP3 PLAYER USING SD CARD KHAIRIL AMRI BIN MUHAMAD UNIVERSITI TEKNIKAL MALAYSIA MELAKA LOW COST MP3 PLAYER USING SD CARD KHAIRIL AMRI BIN MUHAMAD UNIVERSITI TEKNIKAL MALAYSIA MELAKA LOW COST MP3 PLAYER USING SD CARD KHAIRIL AMRI BIN MUHAMAD This report is submitted in partial fulfillment

More information

UPGRADE FMS200: SHAFT SUPPLY MODULE THOUGH HUMAN MACHINE INTERFACE LEE HO CHUNG

UPGRADE FMS200: SHAFT SUPPLY MODULE THOUGH HUMAN MACHINE INTERFACE LEE HO CHUNG i UPGRADE FMS200: SHAFT SUPPLY MODULE THOUGH HUMAN MACHINE INTERFACE LEE HO CHUNG This report is submitted in partial fulfilment of the requirements for the award of Bachelor of Electronic Engineering

More information

DEVELOPMENT OF HOME ENERGY MANAGEMENT SYSTEM (HEMS) CHEA MENG HUAT UNIVERSITI TEKNIKAL MALAYSIA MELAKA

DEVELOPMENT OF HOME ENERGY MANAGEMENT SYSTEM (HEMS) CHEA MENG HUAT UNIVERSITI TEKNIKAL MALAYSIA MELAKA 1 DEVELOPMENT OF HOME ENERGY MANAGEMENT SYSTEM (HEMS) CHEA MENG HUAT UNIVERSITI TEKNIKAL MALAYSIA MELAKA i DEVELOPMENT OF HOME ENERGY MANAGEMENT SYSTEM (HEMS) CHEA MENG HUAT This Report Is Submitted In

More information

HOME APPLIANCES AND SECURITY CONTROLLED VIA GSM SYSTEM NUR SYAFIQAH BINTI YUSOP

HOME APPLIANCES AND SECURITY CONTROLLED VIA GSM SYSTEM NUR SYAFIQAH BINTI YUSOP HOME APPLIANCES AND SECURITY CONTROLLED VIA GSM SYSTEM NUR SYAFIQAH BINTI YUSOP This Report Is Submitted In Partial Fulfilment of Requirements for the Bachelor Degree of Electronic Engineering (Wireless

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA SMART AQUARIUM USING GLOBAL SYSTEM FOR MOBILE COMMUNICATION (GSM) This report submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM)

More information

EDUCATION PATH SYSTEM MOHD ZULHAFIZ BIN HUSSIN

EDUCATION PATH SYSTEM MOHD ZULHAFIZ BIN HUSSIN EDUCATION PATH SYSTEM MOHD ZULHAFIZ BIN HUSSIN This report is submitted in partial fulfillment of the requirements for the Bachelor of Computer Science (Database Management) FACULTY OF INFORMATION AND

More information

BORANG PANGESAHAII STATUS TESIS

BORANG PANGESAHAII STATUS TESIS PSZ 19:16 (Pind.ll97) UNVERST TEKNOLOG MALAYSA BORANG PANGESAHA STATUS TESS JUDUL : SSTEM PARPUSTAKAAN MN ATAS TALAN SES PENGAJAN: 2004noas Saya MUDZALFAH BNT AKBAR (HURUF BESAR) mengaku membenarkantesis

More information

BORANG PENGESAHAN STATUS TESIS JUDUL: TAILOR SYSTEM (TailorSys) (HURUF BESAR)

BORANG PENGESAHAN STATUS TESIS JUDUL: TAILOR SYSTEM (TailorSys) (HURUF BESAR) BORANG PENGESAHAN STATUS TESIS JUDUL: TAILOR SYSTEM (TailorSys) SESI PENGAJIAN: 2-200812009 Saya SIT1 SALBIAH BTE MOHD SALLEH (HURUF BESAR) mengaku membenarkan tesis (PSM/Sarjana/Doktor Falsafah) ini disirnpan

More information

AUTO SILENT MODE FOR ANDROID SMARTPHONES MUHAMMAD AZLAN SHAHARIMAN BIN AHMAD

AUTO SILENT MODE FOR ANDROID SMARTPHONES MUHAMMAD AZLAN SHAHARIMAN BIN AHMAD AUTO SILENT MODE FOR ANDROID SMARTPHONES MUHAMMAD AZLAN SHAHARIMAN BIN AHMAD This report is submitted in partial fulfillment of requirement for the Degree of Bachelor of Electronic Engineering (Computer

More information

PERPUSTAKAAN UTHM *

PERPUSTAKAAN UTHM * * v.l:wsf JvA *-Ji\ PERPUSTAKAAN UTHM 30000001957505* UNIVERSITI TEKNOLOGI MALAYSIA PSZ 19:16 (Pind.1/97) BORANG PENGESAHAN STATUS TESIS^ JUDUL: VESSELS CLASSIFICATION SESI PENGAJ IAN: 2005/2006 Saya NOR

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA DESIGN AND DEVELOPMENT OF VEHICLE SECURITY DEVICE BY USING BIOMETRIC IDENTIFICATION (FINGERPRINT) This report submitted in accordance with requirement of the Universiti

More information

PLC APPLICATION FOR FLOOD DETECTION AND PROTECTION VIA COMMUNICATION SYSTEM MOHD AKMAL BIN ZAINAL ABIDIN

PLC APPLICATION FOR FLOOD DETECTION AND PROTECTION VIA COMMUNICATION SYSTEM MOHD AKMAL BIN ZAINAL ABIDIN PLC APPLICATION FOR FLOOD DETECTION AND PROTECTION VIA COMMUNICATION SYSTEM MOHD AKMAL BIN ZAINAL ABIDIN This report is submitted in partial fulfillment of the requirements for the award Bachelor of Electronic

More information

PROJECT TITLE JARIPAH BINTI ADZHAR

PROJECT TITLE JARIPAH BINTI ADZHAR i PROJECT TITLE WIRELESS REMOTE CONTROL UTILIZING XBEE FOR MOBILE ROBOT APPLICATION JARIPAH BINTI ADZHAR This Report Is Submitted In Partial Fulfillment of Requirements For The Bachelor Degree in Electronic

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA AUTOMATED STREETLIGHT MALFUNCTION ALERT SYSTEM (ASMAS) BY USING GSM This report is submitted in accordance with the requirement of the Universiti Teknikal Malaysia Melaka

More information

KARAOKE MACHINE TOOL MOHD AIEZATT DANIAL B RAMIZAN

KARAOKE MACHINE TOOL MOHD AIEZATT DANIAL B RAMIZAN KARAOKE MACHINE TOOL MOHD AIEZATT DANIAL B RAMIZAN This report is submitted in partial fulfillment of the requirements for the award for of Bachelor Degree of Electronic Engineering (Industrial Electronics)

More information

DESIGN OF ENERGY SAVING AIR CONDITIONING CONTROL SYSTEM MOHD KHUZAIRIE BIN MOHD TAUFIK

DESIGN OF ENERGY SAVING AIR CONDITIONING CONTROL SYSTEM MOHD KHUZAIRIE BIN MOHD TAUFIK DESIGN OF ENERGY SAVING AIR CONDITIONING CONTROL SYSTEM MOHD KHUZAIRIE BIN MOHD TAUFIK This report is submitted in partial fulfillment of the requirement for award of Bachelor of Electronic Engineering

More information

7 I I, BORANG PENGESAHAN STATUS TESIS* SESI PENGAnAN: 2012 I Saya MOHD FARID BIN MOHD YUSOF (B )

7 I I, BORANG PENGESAHAN STATUS TESIS* SESI PENGAnAN: 2012 I Saya MOHD FARID BIN MOHD YUSOF (B ) BORANG PENGESAHAN STATUS TESIS* JUDUL : CLOUD STORAGE SUBSYSTEM FOR PIN-IT SOCIAL NETWORK SESI PENGAnAN: 2012 I 2013 Saya MOHD FARID BIN MOHD YUSOF (B031010350) mengaku membenarkan tesis Projek Sarjana

More information

SIT1 NURI-IAZA BINTI MOHD RAMLI

SIT1 NURI-IAZA BINTI MOHD RAMLI ANALYSIS AND CALCULATION'OF FIBER TO FIBER CONNECTION LOSS SIT1 NURI-IAZA BINTI MOHD RAMLI This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic Engineering

More information

KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN

KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN BORANG PENGESAHAN STATUS TESIS JUDUL: EMBEDDED WEB SERVER SESI PENGAJIAN: 200412005 Saya MUHAMMAD SHUKRI BIN AHMAD ( 801208-14-5007) (HURUF BESAR) mcngaku mcmbcnarkan

More information

DEVELOPMENT OF TIMETABLING PROGRAM FONG WOON KEAT

DEVELOPMENT OF TIMETABLING PROGRAM FONG WOON KEAT ii DEVELOPMENT OF TIMETABLING PROGRAM FONG WOON KEAT This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic Engineering and Computer Engineering With

More information

NUR FARAH DIYANA BINTI SABARUDIN

NUR FARAH DIYANA BINTI SABARUDIN MOBILE E-TIME TABLE SYSTEM ON ANDROID PLATFORM USING NEAR FIELD COMMUNICATION (NFC) NUR FARAH DIYANA BINTI SABARUDIN This Report Is Submitted In Partial Fulfillment of Requirements for the Bachelor Degree

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA AUTOMATIC PET FEEDER USING RASPBERRY PI This report is submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor of

More information

BORANG PENGESAHAN STATUS TESIS ν

BORANG PENGESAHAN STATUS TESIS ν UNIVERSITI TEKNOLOGI MALAYSIA BORANG PENGESAHAN STATUS TESIS ν JUDUL: THE DEVELOPMENT OF METRICA/NPR 3.3 SESI PENGAJIAN: 2004 / 2005 PSZ 19:16(Pind.1/97) Saya MOHD FARID ISMAIL (HURUF BESAR) mengaku membenarkan

More information

INTEGRATION OF CUBIC MOTION AND VEHICLE DYNAMIC FOR YAW TRAJECTORY MOHD FIRDAUS BIN MAT GHANI

INTEGRATION OF CUBIC MOTION AND VEHICLE DYNAMIC FOR YAW TRAJECTORY MOHD FIRDAUS BIN MAT GHANI INTEGRATION OF CUBIC MOTION AND VEHICLE DYNAMIC FOR YAW TRAJECTORY MOHD FIRDAUS BIN MAT GHANI A thesis submitted in fulfilment of the requirements for the award of the degree of Master ofengineering (Mechanical)

More information

DEVELOPMENT OF MOBILE ROBOT CONTROLLER BASED ON BLUETOOTH COMMUNICATION SYSTEM MUHAMAD ROZAIMI BIN MUHAMAD SABRI B

DEVELOPMENT OF MOBILE ROBOT CONTROLLER BASED ON BLUETOOTH COMMUNICATION SYSTEM MUHAMAD ROZAIMI BIN MUHAMAD SABRI B DEVELOPMENT OF MOBILE ROBOT CONTROLLER BASED ON BLUETOOTH COMMUNICATION SYSTEM MUHAMAD ROZAIMI BIN MUHAMAD SABRI B051110128 UNIVERSITI TEKNIKAL MALAYSIA MELAKA 2014 UNIVERSITI TEKNIKAL MALAYSIA MELAKA

More information

INFORMATION TECHNOLOGY EQUIPMENT MANAGEMENT SYSTEM (ITEMS) MOHD NOR IRMAN BIN SULAIh4AN UNIVERSITI TEKNCKAL MALAYSIA MELAKA

INFORMATION TECHNOLOGY EQUIPMENT MANAGEMENT SYSTEM (ITEMS) MOHD NOR IRMAN BIN SULAIh4AN UNIVERSITI TEKNCKAL MALAYSIA MELAKA INFORMATION TECHNOLOGY EQUIPMENT MANAGEMENT SYSTEM (ITEMS) MOHD NOR IRMAN BIN SULAIh4AN UNIVERSITI TEKNCKAL MALAYSIA MELAKA BORANG PENGESABAN STATUS TESIS * JUDUL: INFORMATION TECHNOLOGY EQUIPMENT UANAGEMENT

More information

2D CUT-OUT ANIMATION "MAT TUNANGKU"

2D CUT-OUT ANIMATION MAT TUNANGKU 2D CUT-OUT ANIMATION "MAT TUNANGKU" NUR SAHIDAH BINTI BASHlER UNIVERSITI TEKNIKAL MALAYSIA MELAKA BORANG PENGESAHAN STATUS TESIS* JUDUL: 2D CUT-OUT ANIMATION "MAT TUNANGKU" SESI PENGAJIAN: 2-200812009

More information

PERPUSTAKAAN KUi TTHO 3 OOOO

PERPUSTAKAAN KUi TTHO 3 OOOO power m m i m a m. pam m, optic a t Ii-'iVi ' l v lvi iy InVKv Rt it i FOR m o network I 0-r/ V m m PERPUSTAKAAN KUi TTHO 3 OOOO 00054916 6 UNIVERSITI TEKNOLOGI MALAYSIA BORANG PENGESAHAN STATUS TESIS

More information

INTELLIGENT FINGERPRINT RECOGNITION SYSTEM SY MOHD SYATHIR BIN SY ALI ZAINOL ABIDIN UNIVERSITI MALAYSIA PAHANG

INTELLIGENT FINGERPRINT RECOGNITION SYSTEM SY MOHD SYATHIR BIN SY ALI ZAINOL ABIDIN UNIVERSITI MALAYSIA PAHANG INTELLIGENT FINGERPRINT RECOGNITION SYSTEM SY MOHD SYATHIR BIN SY ALI ZAINOL ABIDIN UNIVERSITI MALAYSIA PAHANG SY MOHD SYATHIR BIN SY ALI ZAINOL ABIDIN BACHELOR OF ELECTRICAL ENGINEERING (POWER SYSTEMS)

More information

PERFOMANCE ANALYSIS OF SEAMLESS VERTICAL HANDOVER IN 4G NETWOKS MOHAMED ABDINUR SAHAL

PERFOMANCE ANALYSIS OF SEAMLESS VERTICAL HANDOVER IN 4G NETWOKS MOHAMED ABDINUR SAHAL PERFOMANCE ANALYSIS OF SEAMLESS VERTICAL HANDOVER IN 4G NETWOKS MOHAMED ABDINUR SAHAL A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering

More information

HOME MAILBOX NOTIFICATION MOHD HAZWAN BIN MOHAMED HARITH

HOME MAILBOX NOTIFICATION MOHD HAZWAN BIN MOHAMED HARITH HOME MAILBOX NOTIFICATION MOHD HAZWAN BIN MOHAMED HARITH This Report Is Submitted In Partial Fulfillment of Requirements For The Bachelor Degree of Electronic Engineering (Telecommunication) Fakulti Kejuruteraan

More information

BORANG PENCALONAN HADIAH UNIVERSITI NOMINATION FORM FOR UNIVERSITY AWARD

BORANG PENCALONAN HADIAH UNIVERSITI NOMINATION FORM FOR UNIVERSITY AWARD BORANG PENCALONAN HADIAH UNIVERSITI NOMINATION FORM FOR UNIVERSITY AWARD PERIHAL HADIAH DESCRIPTION OF AWARD Nama Hadiah (Name of Award) Spesifikasi Hadiah (Specification of Award) Syarat Kurniaan (Condition

More information

DETECTION OF WORMHOLE ATTACK IN MOBILE AD-HOC NETWORKS MOJTABA GHANAATPISHEH SANAEI

DETECTION OF WORMHOLE ATTACK IN MOBILE AD-HOC NETWORKS MOJTABA GHANAATPISHEH SANAEI ii DETECTION OF WORMHOLE ATTACK IN MOBILE AD-HOC NETWORKS MOJTABA GHANAATPISHEH SANAEI A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Computer

More information

THE COMPARISON OF IMAGE MANIFOLD METHOD AND VOLUME ESTIMATION METHOD IN CONSTRUCTING 3D BRAIN TUMOR IMAGE

THE COMPARISON OF IMAGE MANIFOLD METHOD AND VOLUME ESTIMATION METHOD IN CONSTRUCTING 3D BRAIN TUMOR IMAGE THE COMPARISON OF IMAGE MANIFOLD METHOD AND VOLUME ESTIMATION METHOD IN CONSTRUCTING 3D BRAIN TUMOR IMAGE SHAMSHIYATULBAQIYAH BINTI ABDUL WAHAB UNIVERSITI TEKNOLOGI MALAYSIA THE COMPARISON OF IMAGE MANIFOLD

More information

LOGICAL OPERATORS AND ITS APPLICATION IN DETERMINING VULNERABLE WEBSITES CAUSED BY SQL INJECTION AMONG UTM FACULTY WEBSITES NURUL FARIHA BINTI MOKHTER

LOGICAL OPERATORS AND ITS APPLICATION IN DETERMINING VULNERABLE WEBSITES CAUSED BY SQL INJECTION AMONG UTM FACULTY WEBSITES NURUL FARIHA BINTI MOKHTER LOGICAL OPERATORS AND ITS APPLICATION IN DETERMINING VULNERABLE WEBSITES CAUSED BY SQL INJECTION AMONG UTM FACULTY WEBSITES NURUL FARIHA BINTI MOKHTER UNIVERSITI TEKNOLOGI MALAYSIA i LOGICAL OPERATORS

More information

PERPUSTAKAAN UTHM 'I "-: -, * '

PERPUSTAKAAN UTHM 'I -: -, * ' PERPUSTAKAAN UTHM 'I "-: -, 11111111111111111111111111111111111111111111111111111111111111111111111111111111 *30000001883390' KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN BORANG PENGESAHAN STATUS TESIS JUDUL:

More information

AUTOMATIC RAILWAY GATE CONTROLLERUSING ZIGBEE NURLIYANA HAZIRAH BINTI MOHD SAFEE (B )

AUTOMATIC RAILWAY GATE CONTROLLERUSING ZIGBEE NURLIYANA HAZIRAH BINTI MOHD SAFEE (B ) AUTOMATIC RAILWAY GATE CONTROLLERUSING ZIGBEE NURLIYANA HAZIRAH BINTI MOHD SAFEE (B021110154) This report is submitted in partial fulfilment of requirements for the Bachelor Degree of Electronic Engineering

More information

MULTICHANNEL ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING -ROF FOR WIRELESS ACCESS NETWORK MOHD JIMMY BIN ISMAIL

MULTICHANNEL ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING -ROF FOR WIRELESS ACCESS NETWORK MOHD JIMMY BIN ISMAIL MULTICHANNEL ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING -ROF FOR WIRELESS ACCESS NETWORK MOHD JIMMY BIN ISMAIL A project report submitted in partial fulfilment of the requirements for the award of the

More information

HARDWARE/SOFTWARE SYSTEM-ON-CHIP CO-VERIFICATION PLATFORM BASED ON LOGIC-BASED ENVIRONMENT FOR APPLICATION PROGRAMMING INTERFACING TEO HONG YAP

HARDWARE/SOFTWARE SYSTEM-ON-CHIP CO-VERIFICATION PLATFORM BASED ON LOGIC-BASED ENVIRONMENT FOR APPLICATION PROGRAMMING INTERFACING TEO HONG YAP HARDWARE/SOFTWARE SYSTEM-ON-CHIP CO-VERIFICATION PLATFORM BASED ON LOGIC-BASED ENVIRONMENT FOR APPLICATION PROGRAMMING INTERFACING TEO HONG YAP A project report submitted in partial fulfilment of the requirements

More information

Signature :.~... Name of supervisor :.. ~NA.lf... l.?.~mk.. :... 4./qD F. Universiti Teknikal Malaysia Melaka

Signature :.~... Name of supervisor :.. ~NA.lf... l.?.~mk.. :... 4./qD F. Universiti Teknikal Malaysia Melaka "I hereby declare that I have read this thesis and in my opinion this thesis is sufficient in term of scope and quality for the reward of the Bachelor' s degree of Mechanical Engineering (Structure and

More information

ISOGEOMETRIC ANALYSIS OF PLANE STRESS STRUCTURE CHUM ZHI XIAN

ISOGEOMETRIC ANALYSIS OF PLANE STRESS STRUCTURE CHUM ZHI XIAN ISOGEOMETRIC ANALYSIS OF PLANE STRESS STRUCTURE CHUM ZHI XIAN A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Civil-Structure)

More information

ENHANCING SRAM PERFORMANCE OF COMMON GATE FINFET BY USING CONTROLLABLE INDEPENDENT DOUBLE GATES CHONG CHUNG KEONG UNIVERSITI TEKNOLOGI MALAYSIA

ENHANCING SRAM PERFORMANCE OF COMMON GATE FINFET BY USING CONTROLLABLE INDEPENDENT DOUBLE GATES CHONG CHUNG KEONG UNIVERSITI TEKNOLOGI MALAYSIA ENHANCING SRAM PERFORMANCE OF COMMON GATE FINFET BY USING CONTROLLABLE INDEPENDENT DOUBLE GATES CHONG CHUNG KEONG UNIVERSITI TEKNOLOGI MALAYSIA ENHANCING SRAM PERFORMANCE OF COMMON GATE FINFET BY USING

More information

ENHANCING TIME-STAMPING TECHNIQUE BY IMPLEMENTING MEDIA ACCESS CONTROL ADDRESS PACU PUTRA SUARLI

ENHANCING TIME-STAMPING TECHNIQUE BY IMPLEMENTING MEDIA ACCESS CONTROL ADDRESS PACU PUTRA SUARLI ENHANCING TIME-STAMPING TECHNIQUE BY IMPLEMENTING MEDIA ACCESS CONTROL ADDRESS PACU PUTRA SUARLI A project report submitted in partial fulfillment of the requirements for the award of the degree of Master

More information

MD RIDZUAN BIN TALIB DESIGN A MULTI-FUNCTION DIGITAL THERMOMETER

MD RIDZUAN BIN TALIB DESIGN A MULTI-FUNCTION DIGITAL THERMOMETER DESIGN A MULTI-FUNCTION DIGITAL THERMOMETER MD RIDZUAN BIN TALIB This report is submitted in partial filfillment of requirements for the award of Bachelor of Electronic Engineering (Industrial Electronic)

More information

This item is protected by original copyright

This item is protected by original copyright A-PDF Merger DEMO : Purchase from www.a-pdf.com to remove the watermark MEDICAL FACILITIES DATABASE MANAGEMENT SYSTEM By MUHAMMAD FAIZAL BIN OSMAN Report submitted in partial fulfillment of the requirements

More information

BLOCK-BASED NEURAL NETWORK MAPPING ON GRAPHICS PROCESSOR UNIT ONG CHIN TONG UNIVERSITI TEKNOLOGI MALAYSIA

BLOCK-BASED NEURAL NETWORK MAPPING ON GRAPHICS PROCESSOR UNIT ONG CHIN TONG UNIVERSITI TEKNOLOGI MALAYSIA BLOCK-BASED NEURAL NETWORK MAPPING ON GRAPHICS PROCESSOR UNIT ONG CHIN TONG UNIVERSITI TEKNOLOGI MALAYSIA BLOCK-BASED NEURAL NETWORK MAPPING ON GRAPHICS PROCESSOR UNIT ONG CHIN TONG A project report submitted

More information

PROCESS AND YIELD IMPROVEMENT FOR HSDPA MODEM COLLABORATION WITH CUBIC ELECTRONICS SDN BHD NORUL HUSNA BINTI KHOLIAH

PROCESS AND YIELD IMPROVEMENT FOR HSDPA MODEM COLLABORATION WITH CUBIC ELECTRONICS SDN BHD NORUL HUSNA BINTI KHOLIAH PROCESS AND YIELD IMPROVEMENT FOR HSDPA MODEM COLLABORATION WITH CUBIC ELECTRONICS SDN BHD NORUL HUSNA BINTI KHOLIAH This report is submitted in partial fulfillment of the requirements for the award of

More information

IIIIIIIIIIIIIIII~~I]I~I~IIII UT Cfr~1~vl * *

IIIIIIIIIIIIIIII~~I]I~I~IIII UT Cfr~1~vl * * IIIIIIIIIIIIIIII~~I]I~I~IIII UT 11111111111111 Cfr~1~vl *30000001866505* UNIVERSITI TEKNOLOGI MALAYSIA PSZ 19 : 16 (pind. 1197) BORANG PENGESAHAN STATUS TESIS JUDUL EMBEDDED TCP/IP IN SENSOR NODES (SENSORNETS)

More information

AN IMPROVED PACKET FORWARDING APPROACH FOR SOURCE LOCATION PRIVACY IN WIRELESS SENSORS NETWORK MOHAMMAD ALI NASSIRI ABRISHAMCHI

AN IMPROVED PACKET FORWARDING APPROACH FOR SOURCE LOCATION PRIVACY IN WIRELESS SENSORS NETWORK MOHAMMAD ALI NASSIRI ABRISHAMCHI AN IMPROVED PACKET FORWARDING APPROACH FOR SOURCE LOCATION PRIVACY IN WIRELESS SENSORS NETWORK MOHAMMAD ALI NASSIRI ABRISHAMCHI A thesis submitted in partial fulfillment of the requirements for the award

More information

PERFORMANCE ANALYSIS OF SMARTPHONE BASED REAL-TIME DRIVER ASSIST SYSTEM OVER IEEE WIRELESS NETWORKS WONG CHEE YIN

PERFORMANCE ANALYSIS OF SMARTPHONE BASED REAL-TIME DRIVER ASSIST SYSTEM OVER IEEE WIRELESS NETWORKS WONG CHEE YIN PERFORMANCE ANALYSIS OF SMARTPHONE BASED REAL-TIME DRIVER ASSIST SYSTEM OVER IEEE 802.11 WIRELESS NETWORKS WONG CHEE YIN This report is submitted in partial fulfillment of requirements for the Bachelor

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA ATM SECURITY SYSTEM WITH GSM INTEGRATED TECHNOLOGY This report submitted in accordance with requirement of the Universiti Teknikal Malaysia Melaka (UTeM) for the Bachelor

More information

PANDUAN PENGGUNA (PENTADBIR SYSTEM/SYSTEM ADMINISTRATOR) (INFOTECH, BPPF DAN POLIS

PANDUAN PENGGUNA (PENTADBIR SYSTEM/SYSTEM ADMINISTRATOR) (INFOTECH, BPPF DAN POLIS Classroom Reservation User Manual (HEA) PANDUAN PENGGUNA (PENTADBIR SYSTEM/SYSTEM ADMINISTRATOR) (INFOTECH, BPPF DAN POLIS Table of Contents CLASSROOM RESERVATION MANAGEMENT SYSTEM - APLIKASI... 2 Apa

More information

HIGH SPEED SIX OPERANDS 16-BITS CARRY SAVE ADDER AWATIF BINTI HASHIM

HIGH SPEED SIX OPERANDS 16-BITS CARRY SAVE ADDER AWATIF BINTI HASHIM HIGH SPEED SIX OPERANDS 16-BITS CARRY SAVE ADDER AWATIF BINTI HASHIM SCHOOL OF MICROELECTRONIC ENGINEERING UNIVERSITI MALAYSIA PERLIS 2007 HIGH SPEED SIX OPERANDS 16-BITS CARRY SAVE ADDER by AWATIF BINTI

More information

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA UNIVERSITI TEKNIKAL MALAYSIA MELAKA INVESTIGATION ON THE EFFECT OF MACHINING STRATEGIES ON THE SURFACE FINISH AND DIMENSIONAL ACCURACY OF FIVE-AXIS FLANK MACHINING OF CURVY ANGLED SHAPES (CONVEX) This

More information

PANDUAN PENGGUNA (SUPPLIER) MAINTAIN CERTIFICATES/SUPPLIER DETAILS SUPPLIER RELATIONSHIP MANAGEMENT SUPPLY CHAIN MANAGEMENT SYSTEM (SCMS)

PANDUAN PENGGUNA (SUPPLIER) MAINTAIN CERTIFICATES/SUPPLIER DETAILS SUPPLIER RELATIONSHIP MANAGEMENT SUPPLY CHAIN MANAGEMENT SYSTEM (SCMS) PANDUAN PENGGUNA (SUPPLIER) MAINTAIN CERTIFICATES/SUPPLIER DETAILS SUPPLIER RELATIONSHIP MANAGEMENT SUPPLY CHAIN MANAGEMENT SYSTEM (SCMS) DISEDIAKAN OLEH: SUPPLY CHAIN MANAGEMENT (SCM) BAHAGIAN ICT PROCESS

More information

ONTOLOGY-BASED SEMANTIC HETEROGENEOUS DATA INTEGRATION FRAMEWORK FOR LEARNING ENVIRONMENT

ONTOLOGY-BASED SEMANTIC HETEROGENEOUS DATA INTEGRATION FRAMEWORK FOR LEARNING ENVIRONMENT ONTOLOGY-BASED SEMANTIC HETEROGENEOUS DATA INTEGRATION FRAMEWORK FOR LEARNING ENVIRONMENT ARDA YUNIANTA UNIVERSITI TEKNOLOGI MALAYSIA iii This thesis is dedicated to My Wife, who always give me full of

More information

PERPUSTAKAAN KUiTTHO I""" " ""111"1111" III" "" 1111

PERPUSTAKAAN KUiTTHO I  1111111 III  1111 PERPUSTAKAAN KUiTTHO I""" 11111 111111111111"1 11111 ""111"1111" III" "" 1111 3 0000 00180728 7 KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN BORANG PENGESAHAN STATUS TESIS JUDUL: DISTRIBUTED PROCESSING OF

More information

UNSTEADY AERODYNAMIC WAKE OF HELICOPTER MAIN-ROTOR-HUB ASSEMBLY ISKANDAR SHAH BIN ISHAK UNIVERSITI TEKNOLOGI MALAYSIA

UNSTEADY AERODYNAMIC WAKE OF HELICOPTER MAIN-ROTOR-HUB ASSEMBLY ISKANDAR SHAH BIN ISHAK UNIVERSITI TEKNOLOGI MALAYSIA UNSTEADY AERODYNAMIC WAKE OF HELICOPTER MAIN-ROTOR-HUB ASSEMBLY ISKANDAR SHAH BIN ISHAK UNIVERSITI TEKNOLOGI MALAYSIA UNSTEADY AERODYNAMIC WAKE OF HELICOPTER MAIN-ROTOR-HUB ASSEMBLY ISKANDAR SHAH IN ISHAK

More information