Release Notes AVAILABLE APRIL 2013

Transcription

1 HDS GEN2 Touch XXX Software Update Release Notes AVAILABLE APRIL 2013

2 HDS Gen2 Touch XXX Overview Recommended for all HDS Gen2 Touch displays Touch Models only See Gen XXX software and release notes for HDS Gen2 Models New Features Go-Free Wireless support Chart Sharing across the network Faster Internal GPS StructureMap HD Built-in PDF Viewer Navionics Enhancement Contour Shading Shallow Water Shading Dynamic Tides & Currents Easy-View and More!

3 GoFree Wireless A WIFI-1 module will allow screen mirroring through the Lowrance app Connect your wireless device to the GoFree network. Open your Lowrance app and select the HDS you wish to view GoFree is not compatible with HDS Gen1. A Gen1 on the same ethernet network will cause the network to not function properly.

4 Chart Sharing Chart sharing allows a compatible chart card placed in one HDS display to be viewed on every other HDS display on the same ethernet network. Works with Insight, Navionics, Jeppesen and other 3 rd party chart providers Works only on Gen2 or Gen2 Touch units with 2.0 (or later) software installed NOTE: Cartography downloaded from the Insight Store (Insight Genesis, downloaded Insight cards, etc.) are registered to a specific device Content ID and will not share across the network. When a chart card is inserted into a networked display, this message may appear on all displays on the network (if required to view that chart card)

5 5Hz update rate internal GPS antenna The HDS Gen2 internal GPS antenna now updates at a rate of 5Hz (5 times per second) The 5Hz update rate gives smoother trails at any speed. Trail created with 1Hz update rate Trail created with 5Hz update rate

6 StructureMap HD StructureMaps can now be converted and saved in Hi-Resolution. When viewed in Saved mode, they retain original resolution and clarity. Conversion times will be slightly longer and the StructureMap file size will be larger than non-hi Resolution StructureMaps. StructureMap HD logs can be saved and viewed by selecting High Resolution on the convert dialog. StructureMap HD

7 PDF Viewer HDS Gen2 Touch can now display PDFs. HDS units shipped from the factory will have the owner s manual predownloaded onto the HDS PDFs are fully searchable and users can jump to specific pages Navigation can be done by pressing the Page Up and Down Keys

8 Navionics Improvements Navionics viewing options Rock Filter- Show only rocks above a certain depth Easy View - Enlarge on-chart icons Dynamic Tides and Currents Dynamic icons Contour Shading- Highlight a defined depth region Shallow Water Highlight-Highlight shallow water

9 Navionics Easy View When enabled, this feature increases the size of the cartography on screen, as though the user were using a magnifying glass. This feature is controlled with a simple on/off toggle Easy view is found under View in the Chart Options menu Easy View turned off Easy View turned on

10 Dynamic tides and Currents The dynamic tides & currents feature replaces the standard Navionics tide/current icons with larger, animated icons that show the tide levels and the current strengths and directions. This feature is controlled with a simple on/off toggle- Dynamic Tides & Currents is found under View in the Chart Options menu Turned off Turned on

11 Rock Filtering Navionics has introduced a feature that allows users to hide rock POIs beneath a given depth. This is intended to help users declutter charts in areas where there are many rocks located at depths well below their vessel draught. The feature is a slider bar, found under Chart Options Settings, that allows the user to choose a depth below which rocks will be filtered. All rocks enabled Rocks below 5m disabled

12 Depth Contour Shading This allows the user to specifically highlight a specific range of depths for fishing purposes. The range will only be as accurate as the underlying chart data, meaning that if the chart only contains 5 meter intervals for contour lines, the shading will round to the nearest available contour line. This feature is controlled with two adjustment bars, found under Chart Options View. A Max depth must be chosen first. No highlighting enabled Contours highlighted between 6-12m

13 Shallow Water Highlight This feature allows the user to highlight areas of water between 0 feet and the selected depth (up to 30 feet). This feature will be implemented with a slider bar, allowing the user to select a depth between 0 and 30 feet. This option is under Chart Options View No Shallow Water Highlight Depths between 0-3 meters

14 Improvements Networking Networking StructureScan from a Gen2 Touch unit is now independent from Sonar networking Networking StructureScan from a Gen2 Touch unit at the helm to a unit on the bow is now allowed when Sonar networking is disabled or enabled. 3 Panel Split bug Fix HDS Gen2 Touch 1.0 had a known issue where powering down in a 3 panel vertical split would cause a lock-up. This has been resolved. Sonar Improvement The issue where the Sonar and StructureScan would lock up and require a reboot has been resolved.