HygroMet MP Humidity Temperature Meteorological Probe. User Guide
|
|
- Gyles Clarence Shaw
- 5 years ago
- Views:
Transcription
1 Page 1 f 19 HygrMet MP Humidity Temperature Meterlgical Prbe User Guide
2 Page 2 f 19 Table f cntents 1 Overview Mechanical cnfiguratins and dimensins General descriptin Pwer supply Measured parameters Calculated parameters Output signals Analg utput signal type Service cnnectr Prbe User cnfigurable settings and functins Requirements fr cnfiguring the HygrMet MP Functin verview Factry default settings Interactin between the HygrMet MP and prbe functins Mechanical installatin General guidelines Electrical installatin General wiring guidelines Guidelines fr RS-485 wiring (HygrMet MP 3-wire) Wiring clr cde Electrical diagram Operatin Analg utputs RS-485 serial interface Maintenance Service cable Lcatin f the service cnnectr (mini USB type) Peridic calibratin check f the HC2-S3 prbe Cleaning r replacing the prbe dust filter Validatin f the utput signals transmissin Firmware updates Technical data Specificatins Dew pint accuracy Accessries Supprting dcuments Dcument releases... 19
3 Page 3 f 19 Applicability: This manual applies t the HygrMet MP prbe series with firmware versin 1.x, where 1.x can be 1.0, 1.1, etc. Changes t the last digit f the versin number reflect minr firmware changes that d nt affect the manner in which the instrument shuld be perated. 1 Overview The HygrMet MP prbe uses the digital signals frm a HygrClip HC2-S3 digital plug-in prbe t measure humidity and temperature at cnditins within the range f 0 t 100 %RH and -40 t 80 C. In additin the HygrMet MP can be cnfigured t calculate a psychrmetric value such as dew pint, frst pint, enthalpy, etc. The HygrMet MP perates frm a DC vltage surce and is designed fr use in weather statins where pwer is available n a cntinuus basis. The HygrClip HC2-S3 digital plug-in prbe features the well prven ROTRONIC Hygrmer TM IN1 capacitive humidity sensr and a precisin Pt100 RTD. Calibratin data, sensr characteristics, serial number, etc., are retained in a nn-vlatile memry within the prbe. The HC2-S3 is fully interchangeable and can be replaced in secnds withut lss f accuracy. As an ptin, the HygrMet MP prbe can be rdered with an additinal fast respnse temperature prbe (Pt100 RTD) that is directly accessible by means f 4-wires. The HygrMet MP is available in 3-wire circuit type. This versin prvides tw analg utput signals crrespnding t any tw f the fllwing: relative humidity, temperature r calculated value such as dew pint, enthalpy, mixing rati, etc. The 3-wire versin features a RS-485 interface fr the digital transmissin f all 3 signals: relative humidity, temperature and calculated parameter. Based n the ROTRONIC AirChip 3000 digital technlgy the cmbinatin f HygrMet MP and HC2-S3 2 prbe ffers the fllwing user functins: User cnfigurable settings Calculatin f psychrmetric parameters such as the dew r frst pint Humidity temperature calibratin and adjustment Simulatr mde Autmatic humidity sensr test and drift cmpensatin Sensr failure mde Data recrding The ability fr the user t easily update bth the HygrMet MP and HygrClip 2 prbe firmware means that bth devices can be kept up-t-date regarding any future functinality imprvement.
4 Page 4 f 19 2 Mechanical cnfiguratins and dimensins HygrMet MP with HC2-S3 prbe HygrMet MP with HC2-S3 prbe and additinal Pt100 RTD prbe
5 Page 5 f 19 3 General descriptin 3.1 Pwer supply 15 t 24 VDC With bth utput circuits clsed, the maximum current cnsumptin is 50 ma. Depending n the type f analg utput signal, the minimum supply vltage can be reduced as fllws: 0 1 V utputs: 5 VDC minimum 0 5 V utputs: 10 VDC minimum 3.2 Measured parameters The HygrClip HC2-S3 prbe used with the HygrMet MP measures relative humidity with a ROTRONIC Hygrmer IN1 capacitive sensr and temperature with a Pt100 RTD. 3.3 Calculated parameters Using the ROTRONIC HW4 sftware, the HygrMet MP can be cnfigured by the user t calculate ne f the fllwing parameters: Dew pint (Dp) abve and belw freezing Frst pint (Fp) belw freezing and dew pint abve freezing Wet bulb temperature (Tw) Enthalpy (H) Vapr cncentratin (Dv) Specific humidity (Q) Mixing rati by weight (R) Vapr cncentratin at saturatin (Dvs) Vapr partial pressure (E) Vapr saturatin pressure (Ew) Nte: sme f the abve parameters depend n the value f the barmetric pressure. Using the ROTRONIC HW4 sftware, a fixed barmetric pressure value can be specified. Fr instructins see the fllwing HW4 manual: E-M-HW4v2-F2-014
6 Page 6 f Output signals HygrMet MP: 3-wire versin With the ROTRONIC HW4 sftware any f the tw analg utput signals can be made t crrespnd t ne f the fllwing: Relative humidity Temperature Calculated parameter Any utput can als be disabled. The scale f each analg utput can be set within the numerical limits f and The D/A cnverters used t generate the analg utput signals feature a 16-bit reslutin. HygrMet MP 3-wire versin: this versin ffers a RS-485 digital interface in additin t the tw analg utput signals. Making use f this interface allws the simultaneus transmissin f relative humidity, temperature and calculated parameter. 3.5 Analg utput signal type The HygrMet MP 3-wire versin can be rdered with the fllwing utput signal types: a) Current utputs: 0 20 ma r 4 20 ma b) Vltage utputs: 0 1 V, 0 5 V r 0 10 V Nte: the analg signal type is cnfigured at the factry and cannt be changed by the user. 3.6 Service cnnectr The HygrMet MP has an internal service cnnectr (mini-usb type). This cnnectr prvides access t the HygrMet MP UART digital interface (Universal Asynchrnus Receiver Transmitter) and is used t cnnect the HygrMet MP with a service cable t a PC running the ROTRONIC HW4 sftware. See Maintenance fr the lcatin f the service cnnectr and fr the type f service cable t be used. The service cnnectr is used t cnfigure the HygrMet MP and t and update its firmware as necessary. 3.7 Prbe The HygrMet MP is nrmally used with the HC2-S3 prbe and is cmpatible with all available mdels f HygrClip 2 prbes. Fr detailed infrmatin n the HygrClip 2 prbes see dcument E-M-HC2 Prbes-V1. 4 User cnfigurable settings and functins The HygrMet MP ships cnfigured as specified n the custmer rder. The HygrMet MP can be installed and used just as any cnventinal humidity and temperature prbe and mst users will never need t use the HygrMet MP cnfigurable settings and functins. Use f the RS-485 digital interface may require cnfiguratin by the user f the RS-485 netwrk address. Making use f the HygrMet MP and HC2-S3 prbe cnfigurable settings and functins is entirely up t the user and the apprpriate settings depend n the user applicatin. We have prvided belw a shrt descriptin f the HygrMet MP and HC2-S3 and prbe functins and als indicated the factry default settings.
7 Page 7 f Requirements fr cnfiguring the HygrMet MP Cnfiguratin f the HygrMet MP by the user and access t its functins requires the fllwing: PC with the ROTRONIC HW4 sftware (versin r higher) installed. Service cable AC3006 t cnnect the HygrMet internal service cnnectr t a USB prt f the PC. DC vltage surce t pwer the HygrMet MP Nte: The RS-485 interface f the HygrMet MP 3-wire versin can be used as an alternative t the service cnnectr t cnfigure the HygrMet MP after cnnecting the HygrMet MP t a RS-485 netwrk mnitred by a PC with the HW4 sftware. 4.2 Functin verview MEASUREMENT ACCURACY AND RELIABILITY (PROBE FUNCTIONS) AirChip 3000 Functins Humidity / temperature adjustment Autmatic humidity sensr test and ptinal drift cmpensatin Descriptin 1-pint r multi-pint humidity calibratin r adjustment 1-pint r 2-pint temperature calibratin r adjustment Generate a time stamp fr calibratins and adjustments Retain and view last adjustment date and adjustment values Generate calibratin and adjustment prtcls Tests the humidity sensr fr drift caused by cntaminants and can be used t autmatically apply a crrectin. The test is autmatically carried ut at regular intervals f time. Can be cnfigured, enabled, r disabled. The humidity sensr status can be verified either with the HW4 sftware r with the instrument display (if available) and is shwn as Gd, SQtuned (crrected fr drift) r Bad (defective) Data recrding The data recrding functin differs frm a true data lgging functin in the sense that the AirChip 3000 des nt time stamp the data. The data recrding functin can be use t investigate events such as a sensr malfunctin as well as t retrieve data that wuld therwise be lst Start r stp data recrding - up t 2000 value pairs (%RH and temperature). Starting a recrding sessin erases all previusly recrded data The recrding mde and lg interval can be specified When the device is pwered ff, the recrding sessin is paused but nt ended As lng as the recrding sessin has nt been ended, the device autmatically resumes recrding data when pwered up again The recrded data can be dwnladed t a PC with the HW4 sftware, time stamped and viewed MEASUREMENT LOOP VALIDATION Functins Simulatr mde Descriptin Used t make the HygrMet generate fixed values fr the humidity, temperature and calculated parameter. Can be
8 Page 8 f 19 cnfigured, enabled r disabled DEVICE SAFEGUARDS Functins Device write prtectin Descriptin Used t prtect the HygrMet with a passwrd t prevent unauthrized digital access by a digital user. Can be cnfigured, enabled r disabled PROCESS PROTECTION AND PROTECTION OF OTHER DEVICES AirChip 3000 Functins Limit humidity utput t 100 %RH Out-f-limit value alarm Descriptin This prbe functin is used t prevent the humidity signal frm exceeding 100 %RH when cndensatin frms n the sensr. Can be enabled r disabled Used t specify the nrmal range fr humidity, temperature and the calculated parameter depending n the user applicatin. Can be cnfigured, enabled r disabled Bad sensr alarm Fail safe mde Out-f-limit values trigger a digital alarm which can be als be seen n the ptinal display This is a built-in prbe functin. Cannt be disabled A bad humidity r temperature sensr triggers a digital alarm, prvided that the HygrMet is set t mnitr prbe alarms Used t specify a "safe" fixed value fr humidity and fr temperature (HygrMet r prbe) in the event f: Lss f cmmunicatin with the prbe (HygrMet functin) Sensr failure (prbe functin) Can be cnfigured, enabled r disabled 4.3 Factry default settings Cnfigurable Settings Factry default system (Metric r English) As per rdering cde Analg signal type (4 20 ma r ther) As per rdering cde Psychrmetric calculatin As per rdering cde Fixed pressure value hpa r In Hg Output 1 parameter, scale and unit As per rdering cde (%RH r ther) Output 2 parameter, scale and unit Temperature, unit as per rdering cde Cmmunicatin prtcl RO-ASCII RS-485 address 0 Device name Instrument mdel Functins Humidity / temperature adjustment Device write prtectin Limit humidity utput t 100 %RH Factry default Disabled (HygrMet and prbe) Enabled (prbe)
9 Page 9 f 19 Out-f-limit value digital / display alarm Data recrding (prbe) Autmatic humidity sensr test Humidity sensr drift cmpensatin Fail safe mde Mnitr prbe alarms Lss f cmmunicatin with prbe Simulatr mde Disabled (HygrMet and prbe) Enabled (lp mde 10 min. interval) Disabled (prbe) Disabled (prbe) Disabled (prbe) Enabled Disabled (HygrMet) Disabled (HygrMet and prbe) Fr a detailed descriptin f all AirChip 3000 main functins see dcument E-T-AC3000-DF-V1 Instructins regarding the cnfiguratin f the HygrMet MP and prbe as well as access t the functins are prvided in the fllwing manuals: E-M-HW4v2-F2-014 E-M-HW4v2-F2-001 E-M-HW4v2-Main ( 6.5) E-M-HW4v2-DR-001 E-M-HW4v2-A2-001 E-M-AC3000-CP The factry default setting fr dew / frst pint calculatin is frst pint belw freezing 4.4 Interactin between the HygrMet MP and prbe functins It is imprtant t nte that when used tgether, the HygrMet MP transmitter and HC2 prbe (HygrClip 2) cnstitute a 2-cmpnent system. Each system cmpnent has its wn micrprcessr, firmware and functins. Sme f these functins are unique t each system cmpnent. Other functins are fund in bth cmpnents. The functins and settings f the HygrMet MP (HM) and HygrClip 2 prbe (HC2) perate tgether as indicated belw: Functin / Setting HM HC2 Ntes Device prtectin X X Individual t the HygrMet and HC2 prbe RS-485 address X X Individual t the HygrMet and HC2 prbe Device Name X X User defined descriptin The device name f the HC2 prbe is nt displayed by HW4 and is replaced with the HygrMet Input Name Calculatin X X Psychrmetric calculatin HygrMet setting verrides HC2 prbe setting Data refresh rate X This setting has n effect n the HygrMet and prbe. Depending n the mdel, the data refresh rate is as fllws: Simulatr functin X X HygrMet 3-wire: typically 1 s Generates fixed humidity and / r temperature value When enabled, the HygrMet settings verride the HC2 prbe settings
10 Page 10 f 19 Functin / Setting HM HC2 Ntes system X X Out-f-limits value alarm X X Analg utputs X X The HygrMet setting verrides HC2 prbe setting regarding the HygrMet signals. The HC2 prbe settings still apply when the prbe is used alne Make sure t use the same humidity symbl and the same temperature unit fr bth the HygrMet and prbe. The HygrMet settings are independent frm the HC2 prbe settings. The HC2 prbe settings have an effect nly when the HygrMet is enabled t mnitr alarms generated by the prbe When ut-f-limit values have been defined fr the same parameter fr bth the HygrMet and prbe, any alarm is triggered based n the narrwest set f limits (assuming that the HygrMet has been set t mnitr prbe alarms). Parameter and scale The HC2 prbe settings have n effect n the HygrMet 5 Mechanical installatin 5.1 General guidelines Install the HygrMet MP s that the lcal cnditins at the sensrs are typical f the envirnment t be measured: a) Use either a shield r a shelter t prtect the prbe and sensrs frm direct expsure t slar radiatin and precipitatin. Several shields are available frm ROTRONIC (see specificatins). b) In an pen field, install the prbe at least 6.6 feet (tw meters) abve grund. Increase this distance if the grund surface is cncrete r black tp (such as abve a rf). 6 Electrical installatin 6.1 General wiring guidelines Pwer supply wiring Heavy machinery and instrumentatin shuld nt share the same pwer supply wiring. If this cannt be avided, nise filters and surge prtectrs shuld be used. Mst UPS devices have thse features already integrated. General guidelines fr signal cables The fllwing guidelines are derived frm Eurpean Standard EN fr the transmissin f signals by cpper wires. When planning an installatin, the rules prvided by EN shuld be fllwed under cnsideratin f lcal circumstances t determine the psitin f machines and equipment. All ROTRONIC prducts are tested fr Electrmagnetic Cmpatibility accrding t EMC Directive 2004/106/EG and fllwing Eurpean standards:
11 Page 11 f 19 - EN : 2001, EN : EN : 2005, EN : A11 Whenever the level f electrmagnetic interference is expected t be high, bth the instruments and signal cables shuld be placed as far away as pssible frm the surce f interference. In general, signal cables shuld be installed in bundles r channels / cnduits, separate frm ther cables as indicated in the table belw: Bus signals such as RS485 Data signals fr PCs, printers etc. shielded analg inputs unshielded direct current (<= 60V) shielded prcess signals (<= 25 V) unshielded alternate current (<= 25V) caxial cables fr CRT mnitrs in cmmn bundles r channels / cnduits direct current frm 60 V t 400 V (unshielded) alternate current frm 25V t 400 V (unshielded) in separated bundles r channels / cnduits, withut minimum distance direct and alternate current > 400 V (unshielded) Telephne lines lines leading int EX-rated areas in separated bundles r channels / cnduits, withut minimum distance Lightning prtectin Cabling in areas with a risk f lightning requires a lightning prtectin. Fr cabling undergrund in between buildings, we recmmend the use f special fiber ptic cables. If this is nt pssible, use cpper cables that are suitable fr undergrund installatin. 6.2 Guidelines fr RS-485 wiring (HygrMet MP 3-wire) See dcument E-DV04-RS485.01: RS485 Netwrk Installatin and Start-up Guidelines 6.3 Wiring clr cde The HygrMet MP is supplied with 3m (9 ft) f PUR cable with tinned ends. Befre cnnecting the pwer, please make sure that there is n wiring errr. Imprper wiring may damage the HygrMet MP. T facilitate maintenance f the HygrMet MP, keep the prbe cable shrt. D nt replace the cable supplied with the prbe with a much lnger cable. If a lng length f cable is required, use an extensin cable with a maximum length f up t 330 feet (100 meters). When transmitting analg vltage signals ver a lng distance, yu shuld use separate wires fr pwer grund and fr each signal grund.
12 Page 12 f Electrical diagram Electrical diagram fr vltage utputs The maximum permissible cable length can be determined under cnsideratin f the vltage drp caused by the current flwing t the devices cnnected t the unit. The vltage drp in the cable depends bth n cable resistance and n the equivalent resistance f the devices cnnected in parallel t the unit. The ttal resistance cnnected t each unit utput shuld be at least 1000 hms. Cable resistance shuld nt be mre than 1/1000 f the lad resistance. Electrical diagram fr current utputs The maximum permissible cable length, cnnecting the unit t ther devices, is determined by the ttal resistance resulting frm the additin f the cable resistance and that f the devices cnnected in series with the unit. This resistance shuld nt exceed 500 hms.
13 Page 13 f 19 Wiring clr cde Wire clr Gray Descriptin Pwer grund Green White n label Pwer supply (+) 5 24 VDC (depends n utput signal type) Output 1 (+) default: relative humidity r calculated parameter White labeled 2 Output 1 (-) A-GND 1 Brwn Output 2 (+) default: temperature Pink Output 2 (-) A-GND 2 Red Blue Black Purple Orange Yellw Cable shield RS485 (RXD) RS485 (TXD) Optinal: additinal Pt100 RTD prbe PT S Optinal: additinal Pt100 RTD prbe PT AS Optinal: additinal Pt100 RTD prbe PT R Optinal: additinal Pt100 RTD prbe PT AR Drain shuld be cnnected t pwer supply (-) r t an earth grund Measuring humidity r temperature nly Operatin f the HygrMet MP des nt require bth current lps t be clsed. When using the HygrMet MP t measure either humidity nly r temperature nly, clse nly the lp that is being used. Using the ROTRONIC HW4 sftware, any unused utput f the HygrMet MP can be disabled Grunding (all mdels) Operatin f the HygrMet MP des nt require that the unit be electrically grunded. Hwever, we strngly recmmend cnnecting t an earth grund the (-) side f the supply vltage t the prbe. 7 Operatin 7.1 Analg utputs Use the HW4 sftware t cnfigure the HygrMet MP as desired, cmplete the mechanical and electrical installatin, make the electrical cnnectins prbe and simply pwer up the HygrMet MP. 7.2 RS-485 serial interface Instructins fr using the HygrMet MP with a RS-485 netwrk are prvided in the fllwing manuals: E-M-HW4v2-Main ( 6.5), E-M-HW4v2-F2-014 and E-DV04-RS Ntes:
14 Page 14 f 19 Instruments cnnected t the same RS-485 netwrk must use the same baud rate and each instrument must be given a unique RS-485 address (the address requirement applies t the HygrMet MP but nt t its prbe) RS-485 Cmpatibility: The cmmunicatins prtcl used by the HygrMet MP is the RO-ASCII prtcl. This prtcl is nt cmpatible with the prtcl used by the previus generatin f ROTRONIC prducts. D nt cnnect legacy prducts and the HygrMet MP t the same RS-485 multi-drp netwrk. The specificatins f the RS-485 interface are as fllws: Baud rate : Parity : nne Data bits : 8 Stp bits : 1 8 Maintenance 8.1 Service cable Cable AC3006 is used t cnnect the HygrMet MP t a USB prt f a PC running the ROTRONIC HW4 sftware. The AC3006 cable des nt pwer the HygrMet MP and the HygrMet MP shuld be pwered separately. Prir t using this cable yu must install the ROTRONIC USB driver n the PC (available frm the HW4 CD r frm Fr instructins see the HW4 manual E-M-HW4v2-Main ( 6.3) 8.2 Lcatin f the service cnnectr (mini USB type) WARNING: the service cnnectr is a UART interface with a mini-usb cnnectr type. D nt cnnect the service cnnectr directly t the USB prt f a PC r hub. The service cnnectr is lcated n the PCB f the HygrMet MP. T gain access t the service cnnectr prceed as fllws: a) Unscrew the curly cable grip frm the barrel f the HygrMet MP b) Slide back the sealing grmmet ver 15 cm (6 ) f cable c) Unscrew the barrel frm the bulkhead f the HygrMet MP d) Pull the barrel back t uncver the PCB 8.3 Peridic calibratin check f the HC2-S3 prbe Bth the Pt 100 RTD temperature sensr used in the HC2-S3 prbe and assciated electrnics are very stable and shuld nt require any calibratin after the initial factry adjustment. Lng term stability f the ROTRONIC Hygrmer humidity sensr is typically better than 1 %RH per year. Fr maximum accuracy, calibratin f the prbe shuld be verified every 6 t 12 mnths. Applicatins where the prbe is expsed t significant pllutin may require mre frequent verificatins. Using the HW4 sftware t adjust the prbe cnnected t the HygrMet MP:
15 Page 15 f 19 Use cable AC3006 t cnnect the service cnnectr f the HygrMet MP t a USB prt f a PC with the HW4 sftware installed. Nte that the ROTRONIC USB driver must be installed n the PC as explained in the HW4 manual E-M-HW4v2-Main. Pwer the HygrMet MP frm a DC vltage surce Start HW4 n the PC and search fr the HygrMet MP (HW4 Main Menu Bar > Devices and Grups > Search fr USB Masters). After finding the HygrMet MP with HW4, expand the device tree t see the HygrMet MP functins. Select Prbe and Prbe Adjustment. Fr further instructins see HW4 manual E-M-HW4v2-A Cleaning r replacing the prbe dust filter See dcument E-M-HC2 Prbes-V1 8.5 Validatin f the utput signals transmissin If s desired, transmissin f the HygrMet MP utput signals can be validated by using the simulatr functin. The HW4 sftware is required t enable and cnfigure this functin. When this functin is enabled the HygrMet MP generates fixed digital and analg signals as specified by the user. Fr instructins see dcument E-M-HW4v2-F Firmware updates Firmware updates will be available n the ROTRONIC website fr dwnlading. Firmware files are given a name that shws bth t which device the file applies and the versin number f the firmware. All firmware files have the extensin HEX. Prcedure fr updating the firmware: Use cable AC3006 t cnnect the service cnnectr f the HygrMet MP t a USB prt f a PC with the ROTRONIC HW4 sftware installed. Nte that the ROTRONIC USB driver must be installed n the PC as explained in the HW4 manual E-M-HW4v2-Main Pwer the HygrMet MP frm a DC vltage surce. Be sure t pwer the HygrMet MP during the entire firmware update prcess. Cpy the firmware update file frm the ROTRONIC website t the PC. Start HW4 sftware n the PC and search fr the HygrMet MP (HW4 Main Menu Bar > Devices and Grups > Search fr USB Masters). After finding the HygrMet MP, expand the device tree t see the HygrMet MP functins. Select Device Manager. In the Device Manager menu bar select Tls > Firmware Update. Fr instructins see dcument E-M-HW4v2-F2-014
16 Page 16 f Technical data 10.1 Specificatins General Device type Circuit type Humidity temperature prbe with analg utput signals and RS485 interface 3-wire Pwer supply and cnnectins Supply vltage Nminal current cnsumptin Electrical cnnectins VDC 0 1 V utputs: 5 24 VDC 0 5 V utputs: VDC < 50 ma 3 m cable with tinned ends Plarity prtectin Prtective dide n V+ Humidity and temperature measurement See dcument E-M-HC2 Prbes > Specificatins Calculated parameters Psychrmetric calculatins Start-up time and data refresh rate Start-up time Data refresh rate Dew pint (Dp) abve and belw freezing Frst pint (Fp) belw freezing and dew pint abve freezing Wet bulb temperature (Tw) Enthalpy (H) Vapr cncentratin (Dv) Specific humidity (Q) Mixing rati by weight (R) Vapr cncentratin at saturatin (Dvs) Vapr partial pressure (E) Vapr saturatin pressure (Ew) 3 s (typical) 1 s (typical)
17 Page 17 f 19 Cnfigurable analg utputs Output 1 Factry default parameter Factry default scale Output 2 Factry default parameter Factry default scale Output 1 and Output 2 Signal type User cnfigurable scaling limits Shrt circuit tlerant Maximum external lad Minimum external lad Can be made t crrespnd t any parameter Relative humidity r dew / frst pint As per rdering cde Can be made t crrespnd t any parameter Temperature As per rdering cde 0 20 ma 4 20 ma 0 1 V 0 5 V 0 10 V (user cnfigurable) engineering units Yes 500 Ω (current utput) 1000 Ω (vltage utput) 0 Ω (current utput) Digital interface Interface type RS-485 Service cnnectr Interface type Maximum service cable length UART (Universal Asynchrnus Receiver Transmitter) 5 m (16.4 ft) General specificatins HC2-S3 Prbe material Plycarbnate Prbe dust filter material Plyethylene Husing material POM Husing prtectin grade IP 65 Physical dimensins See Mdels Weight (with HC2-S3 prbe) 258 g (9.1 z) Cnfrmity with standards CE / EMC immunity Slder type Fire prtectin class FDA / GAMP directives EMC Directive 2004/108/EG: EN : 2001, EN : 2005 EN : 2005, EN : A11 Lead free (RHS directive) Crrespnds t UL94-HB cmpatible
18 Page 18 f 19 Envirnmental limits Strage and transit Operating limits at electrnics Temperature limits at prbe Maximum humidity at sensr Maximum air velcity at prbe Critical envirnments C / C (mdels with display), %RH, nn cndensing C, %RH, nn cndensing Depends n prbe mdel 100 %RH 20 m/s (3,935 ft /min) Humidity sensr: as per DV Critical chemicals 10.2 Dew pint accuracy See dcument E-M-HC2 Prbes > Dew pint accuracy 11 Accessries Fr accessries and parts such as the HW4 cnfiguratin sftware, service cables, calibratin accessries and spare dust filters, please see dcument E-M-HC2-accessries 12 Supprting dcuments Dcument File Name E-M-HC2 Prbes-V1 Cntents HygrClip 2 (HC2) Humidity Temperature Prbes, User Guide E-M-HC2-accessries Accessries and parts fr prbes, indicatrs and transmitters E-T-AC3000-DF-V1 AirChip 3000 Descriptin and Main Functins E-M-HW4v2-DIR E-M-HW4v2-Main E-M-HW4v2-F2-014 List f the HW4 manuals HW4 sftware versin 2: General instructins and functins cmmn t all devices HW4 sftware versin 2: Device Manager HygrMet MP prbe E-M-HW4v2-F2-001 HW4 sftware versin 2: Device Manager HC2 prbe series E-M-HW4v2-A2-001 HW4 sftware versin 2: Prbe Adjustment functin AirChip 3000 devices E-M-HW4v2-DR-001 HW4 sftware versin 2: Data Recrding Functin AirChip 3000 Devices E-M-AC3000-CP AirChip 3000 Cmmunicatin Prtcl Optins E-DV04-RS E-M-CalBasics RS485 Netwrk Installatin and Start-up Guidelines Temperature and humidity calibratin basics Instructins fr using the ROTRONIC humidity standards
19 Page 19 f 19 Dcument File Name E-T-HumiDefs Cntents Humidity Definitins Nte: All dcument file names have an extensin crrespnding t the dcument release number. This extensin is nt shwn in the abve table. 13 Dcument releases Dc. Release Date Ntes _10 Dec. 4, 2009 Original release
HygroPalm HP22 Hand-Held Indicator User Guide
Dcument cde HygrPalm HP22 hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Instructin Manual Page 1 f 16 Dcument Type HygrPalm HP22 Hand-Held Indicatr 2010; Rtrnic AG E-M-HP22-V2_11
More informationHygroFlex HF8 Humidity Temperature Transmitter. User Guide
Dcument cde HygrFlex HF8 Humidity Temperature Dcument title Rtrnic AG Bassersdrf, Switzerland Instructin Manual Page 1 f 34 Dcument Type HygrFlex HF8 Humidity Temperature Transmitter User Guide 2010; Rtrnic
More informationAccessories and Parts for probes, indicators and transmitters
Page 1 f 23 2009-2010; Page 2 f 23 Table f cntents 1 Cnfiguratin and cmmunicatin sftware... 3 2 Service cables fr transmitters and indicatrs... 3 3 Supply vltage adapters fr the HC2 prbes... 4 4 Extensin
More informationHW4 Software version 3. Device Manager and Data Logging LOG-RC Series Data Loggers
Page 1 f 18 HW4 Sftware versin 3 Device Manager and Data Lgging LOG-RC Series Data Lggers 2011; Page 2 f 18 Table f cntents 1 ORGANIZATION OF THE HW4 MANUALS... 3 2 OVERVIEW... 4 3 INITIAL SETUP... 4 3.1
More informationHW4 Software Version 3.4.1
Release ntes HW4 Sftware Versin 3.4.1 Change cntrl HW4 versin 3.4.1 includes all the functins and features f HW4 versin 3.4.0 with the fllwing mdificatins and additins: Enhancements: Nne New features Nne
More informationHygroPalm HP23-A / HP23-AW-A Hand-Held Indicator User Guide
Dcument cde HygrPalm HP23-A / HP23-AW-A hand-held indicatr: Dcument title Rtrnic AG Bassersdrf, Switzerland Page 1 f 51 Instructin Manual Dcument Type HygrPalm HP23-A / HP23-AW-A Hand-Held Indicatr 2009-2014;
More informationHygroLog HL-NT Data Logger. Instruction Manual
Dcument cde HygrLg HL-NT data lgger: instructin manual Dcument title Rtrnic AG Bassersdrf, Switzerland Instructin Manual Page 1 f 48 Dcument Ty pe HygrLg HL-NT Data Lgger Instructin Manual 2009-2010; Rtrnic
More informationHW4 Software Version 3.7.0
Release ntes HW4 Sftware Versin 3.7.0 Change cntrl HW4 versin 3.7.0 includes all the functins and features f HW4 versin 3.6.0 with the fllwing mdificatins and additins: Enhancements: CRP1: clean rm panel
More informationDate: October User guide. Integration through ONVIF driver. Partner Self-test. Prepared By: Devices & Integrations Team, Milestone Systems
Date: Octber 2018 User guide Integratin thrugh ONVIF driver. Prepared By: Devices & Integratins Team, Milestne Systems 2 Welcme t the User Guide fr Online Test Tl The aim f this dcument is t prvide guidance
More informationGemini Intercom Quick Start Guide
Gemini Intercm Quick Start Guide 2 Quick Start Guide Cntents Cntents... 1 Overview... 3 First Step unpack and inspect... 3 Netwrk plan and IP addresses... 4 Management PC... 5 Install Sftware... 6 Cnfigure
More informationUser Manual 3-Channel Pressure Datalogger Model SD750
User Manual 3-Channel Pressure Datalgger Mdel SD750 Additinal User Manual Translatins available at www.extech.cm Intrductin Cngratulatins n yur purchase f the Extech SD750 Pressure Datalgger fr use with
More informationIntegrating QuickBooks with TimePro
Integrating QuickBks with TimePr With TimePr s QuickBks Integratin Mdule, yu can imprt and exprt data between TimePr and QuickBks. Imprting Data frm QuickBks The TimePr QuickBks Imprt Facility allws data
More information3 Channel Pressure Datalogger. Model SD750 USER GUIDE
3 Channel Pressure Datalgger Mdel SD750 USER GUIDE Intrductin Cngratulatins n yur purchase f the Extech SD750 Pressure Datalgger fr use with 2 wire pressure transducers (ptinally available). This meter
More informationHygroFlex HF3 Transmitters. User Guide
Page 1 of 27 HygroFlex HF3 Transmitters User Guide Page 2 of 27 Table of contents 1 Overview... 3 2 Mechanical configurations and dimensions... 4 2.1 Display option... 5 3 General description... 6 3.1
More informationModel 86A00-2 Home Theater Extender 2 (HTX2)
Mdel 86A00-2 Hme Theater Extender 2 (HTX2) DESCRIPTION The Mdel 86A00-2 Hme Theater Extender 2 (HTX2) allws yu t extend yur hme cntrl t the audi/vide equipment in yur hme theater. The HTX2 cmmunicates
More informationINSTALLING CCRQINVOICE
INSTALLING CCRQINVOICE Thank yu fr selecting CCRQInvice. This dcument prvides a quick review f hw t install CCRQInvice. Detailed instructins can be fund in the prgram manual. While this may seem like a
More informationSmart Arm Installation and Setup Guide
Smart Arm Installatin and Setup Guide PS1E, PS2E and PS150E Objective: The guideline is intended t detail the installatin and setup instructins fr the Smart Mtin Smart Arms systems, including the PS1E,
More informationHygroFlex HF7 Humidity Temperature Transmitters. User Guide
Page 1 of 22 HygroFlex HF7 Humidity Temperature Transmitters User Guide Page 2 of 22 Table of contents 1 Overview... 3 2 Mechanical configurations and dimensions... 4 3 General description... 5 3.1 Power
More informationDear Milestone Customer,
Dear Milestne Custmer, With the purchase f Milestne Xprtect Transact yu have chsen a very flexible ptin t yur Milestne Xprtect Business slutin. Milestne Xprtect Transact enables yu t stre a serial data
More informationROCK-POND REPORTING 2.1
ROCK-POND REPORTING 2.1 AUTO-SCHEDULER USER GUIDE Revised n 08/19/2014 OVERVIEW The purpse f this dcument is t describe the prcess in which t fllw t setup the Rck-Pnd Reprting prduct s that users can schedule
More informationTRAINING GUIDE. Overview of Lucity Spatial
TRAINING GUIDE Overview f Lucity Spatial Overview f Lucity Spatial In this sessin, we ll cver the key cmpnents f Lucity Spatial. Table f Cntents Lucity Spatial... 2 Requirements... 2 Setup... 3 Assign
More informationDIVAR IP 3000 Field Installation Guide
CCTV IP Netwrk Vide Technical Brief DIVAR IP 3000 Field Installatin Guide 1 DIVAR IP 3000 Field Installatin Guide Overview The purpse f this guide is t prvide the step-by-step prcess f installing a DIVAR
More informationUSO RESTRITO. SNMP Agent. Functional Description and Specifications Version: 1.1 March 20, 2015
Functinal Descriptin and Specificatins Versin: 1.1 March 20, 2015 SNMP Agent Simple Netwrk Management Prtcl Optin S fr IE and PM Mdules Supplement t Functinal Descriptin and Specificatins f RUB Ethernet
More informationAdverse Action Letters
Adverse Actin Letters Setup and Usage Instructins The FRS Adverse Actin Letter mdule was designed t prvide yu with a very elabrate and sphisticated slutin t help autmate and handle all f yur Adverse Actin
More informationFirmware Upgrade Wizard v A Technical Guide
Firmware Upgrade Wizard v4.1.1 A Technical Guide Nvember 2015 Intrductin The Firmware Upgrade Wizard prvides the fllwing features: It supprts upgrading the firmware n designated devices, see Supprted devices.
More informationRadio reading unit RFU 40. Data reading application RADIO READER
Radi reading unit RFU 40 Data reading applicatin RADIO READER Table f cntent 1. Radi reading unit RFU 40... 3 1.1. Meaning f LED symbls n the radi reading units RFU 40:... 3 1.2. Technical specificatin...
More informationModel WM100. Product Manual
Mdel WM100 Prduct Manual Table f Cntents Sectin Page 1. Hardware... 3 2. Sftware... 4 3. Features... 5 4. Installatin... 6 5. App Devices... 9 6. App Rms... 12 7. App Scenes... 14 8. App Setup... 18 Cntents
More informationHygroFlex TF5 Temperature Transmitter. User Guide
Page 1 of 23 HygroFlex TF5 Temperature Transmitter Page 2 of 23 Table of contents 1 Overview... 3 2 Dimensional drawings... 4 2.1 Display and keypad option... 4 3 General description... 5 3.1 Power supply...
More information1 Getting and Extracting the Upgrader
Hughes BGAN-X 9202 Upgrader User Guide (Mac) Rev 1.0 (23-Feb-12) This dcument explains hw t use the Hughes BGAN Upgrader prgram fr the 9202 User Terminal using a Mac Nte: Mac OS X Versin 10.4 r newer is
More informationHygroFlex HF7 Humidity Temperature Transmitters. User Guide
Page 1 of 27 HygroFlex HF7 Humidity Temperature Transmitters User Guide Page 2 of 27 Table of contents 1 Overview... 3 2 Mechanical configurations and dimensions... 4 3 General description... 5 3.1 Power
More informationHumidity Temperature Transmitter User Guide
Page 1 of 29 XB Humidity Temperature Transmitter 2015; E-M-XB-V1_26 Page 2 of 29 Table of contents 1 Overview... 3 2 Dimensional drawings... 4 3 General description... 5 3.1 Power supply... 5 3.2 Measured
More informationmultiport Floppy Drive User s Manual
multiprt Flppy Drive User s Manual ISO9001 and AS9100 Certified BDM-610040005 Rev. A multiprt Flppy Drive RTD EMBEDDED TECHNOLOGIES, INC. 103 Innvatin Blvd State Cllege, PA 16803-0906 Phne: +1-814-234-8087
More informationGANTOM 7: COMPACT SEVEN COLOR DMX SPOTLIGHT USER GUIDE
GANTOM 7: COMPACT SEVEN COLOR DMX SPOTLIGHT USER GUIDE The Gantm 7 packs seven-clr utput int a tiny package. With a native 15 degree beam angle, this LED sptlight prduces a punchy yet sft beam with hmgeneus
More informationLaunching Xacta 360 Marketplace AMI Guide June 2017
Launching Xacta 360 Marketplace AMI Guide June 2017 Tels Crpratin 2017. All rights reserved. U.S. patents Ns. 6,901,346; 6,980,927; 6,983,221; 6,993,448; and 7,380,270. Xacta is a registered trademark
More informationConfiguring Database & SQL Query Monitoring With Sentry-go Quick & Plus! monitors
Cnfiguring Database & SQL Query Mnitring With Sentry-g Quick & Plus! mnitrs 3Ds (UK) Limited, Nvember, 2013 http://www.sentry-g.cm Be Practive, Nt Reactive! One f the best ways f ensuring a database is
More informationTrimble Survey GNSS Firmware Version 4.81 (July 2013)
Handheld Integrated Mdular RELEASE NOTES TRIMBLE SURVEY GNSS FIRMWARE Trimble Survey GNSS Firmware Versin 4.81 (July 2013) Requirements This firmware versin includes imprvements t the Survey Receiver firmware.
More informationApplication Note. Digi Connect Wi-SP Troubleshooting Guide. Digi Technical Support 10 May 2016
Applicatin Nte Digi Cnnect Wi-SP Trubleshting Guide Digi Technical Supprt 10 May 2016 Cntents 1 Intrductin... 3 1.1 Assumptins... 3 1.2 Crrectins... 3 2 Quick Facts... 3 2.1 Cmmn Questins Abut the Cnnect
More informationGE Multilin F650 Feeder Protection Relay and Bay Controller Specifications
GE Multilin F650 Feeder Prtectin Relay and Bay Cntrller Specificatins Prtectin, mnitring and metering shall be supplied in ne integrated digital relay package fr applicatins suitable fr incrpratin int
More informationDynamic Storage (ECS)
User Guide Dynamic Strage (ECS) Swisscm (Schweiz) AG 1 / 10 Cntent 1 Abut Dynamic Strage... 3 2 Virtual drive, the EMC CIFS-ECS Tl... 4 3 Amazn S3 Brwer... 6 4 Strage Gateway Appliance... 9 5 Amazn S3
More informationOASIS SUBMISSIONS FOR FLORIDA: SYSTEM FUNCTIONS
OASIS SUBMISSIONS FOR FLORIDA: SYSTEM FUNCTIONS OASIS SYSTEM FUNCTIONS... 2 ESTABLISHING THE COMMUNICATION CONNECTION... 2 ACCESSING THE OASIS SYSTEM... 3 SUBMITTING OASIS DATA FILES... 5 OASIS INITIAL
More informationGE Multilin 850 Feeder Protection Relay Specifications
GE Multilin 850 Feeder Prtectin Relay Specificatins Prtectin, mnitring and metering shall be supplied in ne integrated digital relay package fr applicatin t mtrs suitable fr incrpratin int an integrated
More information1 Getting and Extracting the Upgrader
Hughes BGAN-X 9211 Upgrader User Guide (Mac) Rev 1.2 (6-Jul-17) This dcument explains hw t use the Hughes BGAN Upgrader prgram fr the 9211 User Terminal using a Mac Nte: Mac OS X Versin 10.4 r newer is
More informationCaseWare Working Papers. Data Store user guide
CaseWare Wrking Papers Data Stre user guide Index 1. What is a Data Stre?... 3 1.1. When using a Data Stre, the fllwing features are available:... 3 1.1.1.1. Integratin with Windws Active Directry... 3
More informationCustomers should provide all necessary operating supplies upon request of the engineer.
Agilent G5522A NGS Wrkstatin Optin B Installatin Checklist Thank yu fr purchasing an Agilent G5522A NGS Wrkstatin Optin B. This checklist is used by the installing engineer t ensure that the instrument
More informationCustodial Integrator. Release Notes. Version 3.11 (TLM)
Custdial Integratr Release Ntes Versin 3.11 (TLM) 2018 Mrningstar. All Rights Reserved. Custdial Integratr Prduct Versin: V3.11.001 Dcument Versin: 020 Dcument Issue Date: December 14, 2018 Technical Supprt:
More informationSMART Room System for Microsoft Lync. Software configuration guide
SMART Rm System fr Micrsft Lync Sftware cnfiguratin guide Fr mdels SRS-LYNC-S, SRS-LYNC-M and SRS-LYNC-L In this guide: Fr yur recrds 1 Preparing fr yur rm system 2 Befre cnfiguring yur rm system s sftware
More informationUSER GUIDE. Thanks for purchasing the igate! You ll need to follow these five Configuration Steps to get your igate up and running:
USER GUIDE Thanks fr purchasing the igate! Yu ll need t fllw these five Cnfiguratin Steps t get yur igate up and running: 1. Cnfigure Yur Hardware 2. Cnfigure Yur Cmputer 3. Cnfigure Yur Internet Cnnectin
More informationInfinity RGB & Grayscale SERIES
Infinity RGB & Grayscale SERIES OPTV2SS Internal Cntrller Setup Guide Mar. 2011 Step 1. Uncrating and Lifting Open the crate frm the tp. Use crane r frklift t lift the display ut f the crate. Always use
More informationNiceLabel LMS. Installation Guide for Single Server Deployment. Rev-1702 NiceLabel
NiceLabel LMS Installatin Guide fr Single Server Deplyment Rev-1702 NiceLabel 2017. www.nicelabel.cm 1 Cntents 1 Cntents 2 2 Architecture 3 2.1 Server Cmpnents and Rles 3 2.2 Client Cmpnents 3 3 Prerequisites
More information3 AXIS STAGE CONTROLLER
CORTEX CONTROLLERS 50, St Stephen s Pl. Cambridge CB3 0JE Telephne +44(0)1223 368000 Fax +44(0)1223 462800 http://www.crtexcntrllers.cm sales@crtexcntrllers.cm 3 AXIS STAGE CONTROLLER Instructin Manual
More informationApply power, the appliance may be powered by connecting:
ACM5508-2- GS- I Quick Start Guide Thank yu fr purchasing the ACM5508-2-GS-I management gateway. This Quick Start walks yu thrugh installatin, cnfiguratin & lcal peratin. Mre details are available in the
More informationUSER MANUAL. RoomWizard Administrative Console
USER MANUAL RmWizard Administrative Cnsle Cntents Welcme... 3 Administer yur RmWizards frm ne lcatin... 3 Abut This Manual... 4 Setup f the Administrative Cnsle... 4 Installatin... 4 The Cnsle Windw...
More informationHygroFlex HF3 Transmitters and Thermohygrostats: User Guide
Page 1 of 26 HygroFlex HF3 Transmitters and thermo-hygrostats Page 2 of 26 Table of contents 1 Overview... 3 2 Mechanical configurations and dimensions... 4 2.1 Display option... 5 3 General description...
More informationSafeDispatch SDR Gateway for MOTOROLA TETRA
SafeDispatch SDR Gateway fr MOTOROLA TETRA SafeMbile ffers a wrld f wireless applicatins that help rganizatins better manage their mbile assets, fleet and persnnel. Fr mre infrmatin, see www.safembile.cm.
More informationMax 8/16 and T1/E1 Gateway, Version FAQs
Frequently Asked Questins Max 8/16 and T1/E1 Gateway, Versin 1.5.10 FAQs The FAQs have been categrized int the fllwing tpics: Calling Calling Cmpatibility Cnfiguratin Faxing Functinality Glssary Q. When
More informationCampuses that access the SFS nvision Windows-based client need to allow outbound traffic to:
Summary This dcument is a guide intended t guide yu thrugh the prcess f installing and cnfiguring PepleTls 8.55.27 (r current versin) via Windws Remte Applicatin (App). Remte App allws the end user t run
More informationHPE BladeSystem c3000 Tower Enclosure Quick Setup Instructions
HPE BladeSystem c3000 Twer Enclsure Quick Setup Instructins Part Number: 457023-006 Nvember 2015 (Sixth Editin) Site requirements Select an installatin site that meets the detailed installatin site requirements
More informationSolarEdge. Communication Options. Version 1.1
SlarEdge Cmmunicatin Optins Versin 1.1 Versin Histry Versin Histry Versin 1.0 (2012) Initial release Versin 1.1 (Nvember 2017) Added cmmunicatin ptins: RS485-X RS485 Expansin Kit Wi-Fi Cellular Cnnectivity
More informationCONTROLLER CAN NODES. Controller CAN Nodes. Extending the Control System
Cntrller CAN Ndes Extending the Cntrl System Varius CAN Ndes are available fr Smartpack, Smartpack2 and Smartpack S cntrllers. The ndes have dedicated inputs and utputs that expand the system mnitring.
More informationDemand Forecasting. For. Microsoft Dynamics 365 for Operations. Technical Guide. Release 7.1. December 2017
Demand Frecasting Fr Micrsft Dynamics 365 fr Operatins Technical Guide Release 7.1 December 2017 2017 Farsight Slutins Limited All Rights Reserved. Prtins cpyright Business Frecast Systems, Inc. This dcument
More informationVMware EVO:RAIL Customer Release Notes
VMware EVO:RAIL Custmer Release Ntes EVO:RAIL Release 1.2.0 Dcument Revisin: 1.2.0-2 (May 27, 2015) Cpyright 1998-2015 VMware, Inc. All rights reserved. Cpyright, trademark, and patent infrmatin: http://pubs.vmware.cm/cpyright-trademark.html.
More informationMaster Calendar Navigation
Master Calendar Navigatin Scheduling> Clinic Master Calendar Use arrws t navigate: day --> week --> mnth. Mnth View Gld bar current date White n shw rate past calendar dates Grey blcked time Green appintment
More informationCntents 1 Intrductin Kit Cntents Requirements Installatin Gesture Sensr Kit Hardware and Jumper Settings De
Thin Film Pyrelectric IR Gesture Sensr Demnstratr Kit Fr lw pwer, high perfrmance gesture cntrl User Guide Versin 1.0 Dcument Revisin 1.00 20 th February 2012 Cntents 1 Intrductin... 3 1.1 Kit Cntents...
More informationDolby Conference Phone Support Frequently Asked Questions
Dlby Cnference Phne Supprt Frequently Asked Questins Versin 1.0, 1 Intrductin This dcument prvides sme answers t frequently asked questins abut the Dlby Cnference Phne. Fr mre detailed infrmatin n any
More informationPL2303SA (SOP8 Package) USB to Serial Bridge Controller Product Datasheet
PL2303SA (SOP8 Package) USB t Serial Bridge Cntrller Prduct Datasheet Dcument Revisin: 1.2.0 Dcument Release: Prlific Technlgy Inc. 7F, N. 48, Sec. 3, Nan Kang Rd. Nan Kang, Taipei 115, Taiwan, R.O.C.
More informationThese tasks can now be performed by a special program called FTP clients.
FTP Cmmander FAQ: Intrductin FTP (File Transfer Prtcl) was first used in Unix systems a lng time ag t cpy and mve shared files. With the develpment f the Internet, FTP became widely used t uplad and dwnlad
More informationOPTICAL SPORTSHOOTING OWNERS MANUAL. Laser-products
Updated 9.1.2013 OPTICAL SPORTSHOOTING OWNERS MANUAL Laser-prducts Page 1/9 Manual Laser-prducts 2013.01.09_EN_2013.01.09 Table f cntents 1 GENERAL DESCRIPTION... 3 2 HOW TO USE THE SYSTEM... 3 2.1 Start-up...
More informationDell Chassis Management Controller (CMC) Version 1.35 for Dell PowerEdge VRTX. Release Notes
Dell Chassis Management Cntrller (CMC) Versin 1.35 fr Dell PwerEdge VRTX Release Ntes Release Type and Definitin The Dell Chassis Management Cntrller (CMC) Versin 1.35 fr Dell PwerEdge VRTX is a System
More informationNew Product Release Package 8 XT[2] System and Software 19 Jan 2009
New Prduct Release Package 8 XT[2] System and Sftware 19 Jan 2009 1.1 NEW OPERATIONAL FEATURES IN MULTICAM 8... 1 1.2 NEW HARDWARE FEATURES... 6 1.3 NEW SYSTEM FEATURES... 6 1.4 BUG FIXES UP TO 08.04.33...
More informationDocument Revision CSSIR 03/07
i-rack User Manual Dcument Revisin CSSIR 03/07 Cpyright and Trademark 2004, Cmputer Supprt Systems All rights reserved. N part f the cntents f this manual may be transmitted r reprduced in any frm r by
More informationVIBRATION MONITORING NEAR FIELD VIBRATION MONITOR
VIBRATION MONITORING NEAR FIELD VIBRATION MONITOR ShtTrack ViB 1000 is a cmpact vibratin mnitr designed fr use in the tugh envirnment f mine sites. This is especially imprtant fr near field mnitring. VIBRATION
More informationSecure File Transfer Protocol (SFTP) Interface for Data Intake User Guide
Secure File Transfer Prtcl (SFTP) Interface fr Data Intake User Guide Cntents Descriptin... 2 Steps fr firms new t batch submissin... 2 Acquiring necessary FINRA accunts... 2 SFTP Access t FINRA... 2 SFTP
More informationAPG8205 OTP Generator
APG8205 OTP Generatr Technical Specificatins V1.00 Subject t change withut prir ntice inf@acs.cm.hk www.acs.cm.hk Table f Cntents 1.0. Intrductin... 3 2.0. Features... 4 3.0. Typical Applicatins... 6 4.0.
More informationI. Introduction: About Firmware Files, Naming, Versions, and Formats
Updating Yur CTOG 250 Cmtech Traffic Optimizatin Gateway Firmware I. Intrductin: Abut Firmware Files, Naming, Versins, and Frmats The CTOG 250 Cmtech Traffic Optimizatin Gateway and its CDM 800 Gateway
More informationCustomers should provide all necessary operating supplies upon request of the engineer.
Intuv 9000 GC Installatin Checklist Thank yu fr purchasing an Agilent Instrument slutin. This checklist is used by the installing engineer t ensure that the instrument and assciated systems are crrectly
More informationBMC Remedyforce Integration with Remote Support
BMC Remedyfrce Integratin with Remte Supprt 2003-2018 BeyndTrust, Inc. All Rights Reserved. BEYONDTRUST, its lg, and JUMP are trademarks f BeyndTrust, Inc. Other trademarks are the prperty f their respective
More information1 Getting and Extracting the Upgrader
Hughes BGAN-X 9202 Upgrader User Guide (PC) Rev 1.0 (23-Feb-12) This dcument explains hw t use the Hughes BGAN-X Upgrader prgram fr the 9202 User Terminal using a PC. 1 Getting and Extracting the Upgrader
More informationPRECISION DMX USER GUIDE
PRECISION DMX USER GUIDE The Precisin DMX is the wrld s smallest DMX cntrllable theatrical fldlight. This RGB fixture is smaller than a fist yet packs cmparable punch t traditinal fixtures several times
More informationConnect+/SendPro P Series Networking Technical Specification
Shipping & Mailing Pstage Meters Cnnect+/SendPr P Series Netwrking Technical Specificatin Intrductin 2 Netwrk Requirements 2 Prt/Cmmunicatin Requirements 2 URL Infrmatin 3 FAQs 10 Service Cllateral SV62440
More informationCounterSnipe Software Installation Guide Software Version 10.x.x. Initial Set-up- Note: An internet connection is required for installation.
CunterSnipe Sftware Installatin Guide Sftware Versin 10.x.x CunterSnipe sftware installs n any system cmpatible with Ubuntu 14.04 LTS server which is supprted until 2019 Initial Set-up- Nte: An internet
More informationRelease Notes. Dell SonicWALL Security firmware is supported on the following appliances: Dell SonicWALL Security 200
Release Ntes Email Security Dell SnicWALL Email Security 8.0.1 SnicOS Cntents System Cmpatibility... 1 Enhancements in Email Security 8.0.1... 2 Reslved Issues... 3 Upgrading t Email Security 8.0.1...
More informationsoftpanel generic installation and operation instructions for nanobox products
1 f 10 System Requirements... 3 Installatin... 3 Java... 3 RxTx Serial Drivers... 3 Granting a user permissin t pen a COM Prt in Mac OS X... 3 USB t Serial Drivers... 4 Mac OS X 10.6 Snw Lepard... 4 Operatin...
More informationCustomers should provide all necessary operating supplies upon request of the engineer.
Agilent G5574A NGS Wrkstatin Optin B Installatin Checklist Thank yu fr purchasing an Agilent G5574A NGS Wrkstatin Optin B. This checklist is used by the installing engineer t ensure that the instrument
More informationUploading Files with Multiple Loans
Uplading Files with Multiple Lans Descriptin & Purpse Reprting Methds References Per the MHA Handbk, servicers are required t prvide peridic lan level data fr activity related t the Making Hme Affrdable
More informationElement Creator for Enterprise Architect
Element Creatr User Guide Element Creatr fr Enterprise Architect Element Creatr fr Enterprise Architect... 1 Disclaimer... 2 Dependencies... 2 Overview... 2 Limitatins... 3 Installatin... 4 Verifying the
More informationCustomer Information. Agilent 2100 Bioanalyzer System Startup Service G2949CA - Checklist
This checklist is used t prvide guidance and clarificatin n aspects f the auxillary Startup Service (G2949CA) including Security Pack Installatin and Familiarizatin f yur Agilent 2100 Bianalyzer System
More informationAvePoint Pipeline Pro 2.0 for Microsoft Dynamics CRM
AvePint Pipeline Pr 2.0 fr Micrsft Dynamics CRM Installatin and Cnfiguratin Guide Revisin E Issued April 2014 1 Table f Cntents Abut AvePint Pipeline Pr... 3 Required Permissins... 4 Overview f Installatin
More informationHPE LoadRunner Best Practices Series. LoadRunner Upgrade Best Practices
HPE LadRunner Best Practices Series LadRunner 12.50 Upgrade Best Practices Dcument publicatin date: Nvember 2015 Cntents 1. Intrductin... 3 Overview... 3 Audience... 3 2. Preparatin... 3 Backup assets...
More informationWestinghouse Nuclear Automation. Ovation -based Rod Control Logic Cabinet
Westinghuse Nuclear Autmatin Ovatin -based Rd Cntrl Lgic Cabinet Backgrund The Westinghuse slid state rd cntrl system has been in peratin at many plants fr ver 30 years. The riginal system has demnstrated
More informationMicrosoft Excel Extensions for Enterprise Architect
Excel Extensins User Guide Micrsft Excel Extensins fr Enterprise Architect Micrsft Excel Extensins fr Enterprise Architect... 1 Disclaimer... 2 Dependencies... 2 Overview... 2 Installatin... 4 Verifying
More informationTechnical Paper. Installing and Configuring SAS Environment Manager in a SAS Grid Environment
Technical Paper Installing and Cnfiguring SAS Envirnment Manager in a SAS Grid Envirnment Last Mdified: Octber 2016 Release Infrmatin Cntent Versin: Octber 2016. Trademarks and Patents SAS Institute Inc.,
More informationFIRMWARE RELEASE NOTES. Versions V2.0.0 to V Model HDL-32E. High Definition LiDAR Sensor
FIRMWARE RELEASE NOTES Versins V2.0.0 t V2.2.21.0 Mdel HDL-32E High Definitin LiDAR Sensr HDL-32E Firmware Release Ntes Page 2 Fr all new features and changes, refer t the dcumentatin that accmpanies the
More informationAFX CABINET SYSTEMS. AFX Series. 18 kva/kw to 150 kva/kw. DC, Hz Vac L-N / Vac L-L / 0 - ± 425 Vdc Bipolar
AFX Series AFX CABINET SYSTEMS 18 kva/kw t 150 kva/kw DC, 15-1200 Hz 0-300 Vac L-N / 0-600 Vac L-L / 0-520 Vac L-L 0 - ± 425 Vdc Biplar Standard Features: Turn-key, fully integrated cabinet pwer systems
More informationWave IP 4.5. CRMLink Desktop User Guide
Wave IP 4.5 CRMLink Desktp User Guide 2015 by Vertical Cmmunicatins, Inc. All rights reserved. Vertical Cmmunicatins and the Vertical Cmmunicatins lg and cmbinatins theref and Vertical ViewPint, Wave Cntact
More informationOperation Manual of EX9132C-RS485. Serial to TCP/IP Converter
Operatin f EX9132C-RS485 Serial t TCP/IP Cnverter Versin 1.0.1 21.09.2015 Table f Cntents 1 Intrductin... 3 1.1 Overview... 3 1.2 Package Checklist... 3 1.3 Blck Diagram... 4 1.4 Prduct Features... 4 1.5
More informationAvocent Power Management Distribution Unit (PM PDU) Release Notes Firmware Version April 18, 2011
Avcent Pwer Management Distributin Unit (PM PDU) Release Ntes Firmware Versin 2.0.1.8 April 18, 2011 This dcument utlines: 1. Update Instructins 2. Appliance Firmware Versin Infrmatin 3. Features/Enhancements
More informationMaintenance Release Notes Release Version: 9.5.5
Maintenance Release Ntes Release Versin: 9.5.5 Platfrm: 9.5 MR201510 Cntents Updates Included in this Release... 1 Rules Cnsle:... 1 New Feature: Avaya Cumulative Metrics... 1 Technical Gd Health:... 3
More informationEBC-1000G Embedded Chassis
EBC-000G Embedded Chassis Versin:. Quick Installatin Guide PACKING LIST When yu unpack the chassis, make sure the fllwing items have been shipped. x Quick Installatin Guide x Pwer crd 2 x Base plates x
More informationAvigilon Control Center Server User Guide. Version 6.4
Avigiln Cntrl Center Server User Guide Versin 6.4 2006-2017, Avigiln Crpratin. All rights reserved. AVIGILON, the AVIGILON lg, AVIGILON CONTROL CENTER, ACC, and TRUSTED SECURITY SOLUTIONS.AVIGILON, the
More informationBMC Remedyforce Integration with Bomgar Remote Support
BMC Remedyfrce Integratin with Bmgar Remte Supprt 2017 Bmgar Crpratin. All rights reserved wrldwide. BOMGAR and the BOMGAR lg are trademarks f Bmgar Crpratin; ther trademarks shwn are the prperty f their
More information