(db)
|
|
- Sydney Lambert
- 5 years ago
- Views:
Transcription
1 75Ω Video Patchbays 75Ω Video Patchbays G-ready HD-SDI video patchbays featuring Canare s uniquely-developed rotary switches. Panel Size Loaded Video Jacks 2DV 1 U 2 x 2DVS 1 U 2 x DVJB-S 2DV-2U 2 U 2 x 2DVS-2U 2 U 2 x DVJB-S 24DV 1 U 24 x 24DVS 1 U 24 x DVJB-S 24DV-2U 2 U 24 x 24DVS-2U 2 U 24 x DVJB-S 26DV 1 U 26 x 26DVS 1 U 26 x DVJB-S 26DV-2U 2 U 26 x 26DVS-2U 2 U 26 x DVJB-S *Colors other than black are available on custom-made basis. (See page 71) Ω 26DV 15.9 WILL VOID WAANTY 75Ω s DVJB-S VJ-DC Straight Through Dust Cap for Video Jack (color: black 4 pcs) Key Features and Benefits l otary switch has been improved for superior isolatinon. l Also usable as digital audio patchbay. l Can be recessed mm. l Wide designation strip (2 U type). l Lightweight aluminum alloy video jacks (GHz) (GHz) Patch Through eturn loss for (GHz) Isolation eturn Loss & Isolation DVJB-S eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 26 db or greater (~75 MHz) 2 db or greater (~2.4 GHz) 1 db or greater (~. GHz) 26 db or greater (~75 MHz) 26 db or greater (~75 MHz) N/A 2 db or greater (~2.4 GHz) 2 db or greater (~1.5 GHz) 1 db or greater (~. GHz) 1 db or greater (~. GHz) Isolation 5 db or greater (~1.5 GHz) 2 db or greater (~. GHz) 5 db or greater (~1.5 GHz) 2 db or greater (~. GHz) Technical Note otary Switch Technology and Signal outing Chart At the heart of the video jack is an independently-developed rotary switch which has been specially designed for use with high frequency signals. It features dual-contact construction for improved contact stability. W Series () S Series (Straight Through) No Patch Signal thru as Arrowed Signal routes between top and bottom BNC without the use of Video plugs. No Patch Two independent single jacks in a Both Signal Terminated dual housing. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75Ω load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75Ω load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75Ω load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75Ω load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. 68
2 75Ω Mid-size Video Patchbays 75Ω Staggered Mid-size Video Patchbays G-ready mid-size video jacks allow for more efficient use of rack space. Panel Size Loaded Video Jacks 2MD-ST 1 U 2 x MDVJ-S 2MD-STS 1 U 2 x MDVJ-STS 2MD-ST-2U 2 U 2 x MDVJ-S 2MD-STS-2U 2 U 2 x MDVJ-STS 2MD-ST-4U 4 U 96 x MDVJ-S 2MD-STS-4U 4 U 96 x MDVJ-STS *Colors other than black are available on custom model basis except 4U type (See page 71). 75Ω Staggered Mid-size Video Jacks MDVJ-S MDVJ-STS MVJ-DC Staggered Mid-size Video Jack, Staggered Mid-size Video Jack, Straight Through Dust cap for Mid-size video Jack (color: black 4 pcs) Key Features and Benefits l 2 channels of I/O into 1 U or 2 U, 96 channels of I/O into 4 U. l otary switch has been improved for superior isolation. l Can be recessed mm (1 U, 2 U type). l Wide designation strip (2 U, 4 U type). l Lightweight aluminum alloy video jacks. l Industry standard BNC plugs can be used. Note : Be sure to use with Mini-Weco video plug (GHz) (GHz) Patch Through (Long BNC port) eturn loss for MDVJ-S t MDVJ-S WILL VOID WAANTY 2MD-ST-4U (GHz) Patch Through (Short BNC port) eturn Loss & Isolation eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 26 db or greater (~75 MHz) MDVJ-S 2 db or greater (~2.4 GHz) 1 db or greater (~. GHz) 26 db or greater (~75 MHz) 26 db or greater (~75 MHz) MDVJ-STS N/A 2 db or greater (~2.4 GHz) 2 db or greater (~1.5 GHz) 1 db or greater (~. GHz) 1 db or greater (~. GHz) 2MD-STS (GHz) Isolation Isolation 5 db or greater (~1.5 GHz) 2 db or greater (~. GHz) 5 db or greater (~1.5 GHz) 2 db or greater (~. GHz) 15.9 Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 69
3 Video Plugs Video Plug (W.E.Standard) Suitable Cable Boot Die Set VWP-C4A LV-61S, G-59B/U, Belden 8241, 8279, 241 CB4 TCD-451CA TCD-4CA Standard Package (2pcs) l Gold-plated center contact resists deterioration over years of use. l Solder center contact and crimp sleeve. VWP-C4A Be sure to use Canare Crimp Tool. VWP-C4A Video Patch Cord (see page 8) Mini-WECO Video Plug Suitable Cable Boot Die Set MVP-C4 LV-61S, G-59B/U, Belden 8241, 8279, 241 CB TCD-451CA TCD-4CA Standard Package (2pcs) MVP-C4 l eturn loss: 26 db or greater (DC GHz), 2 db or greater (DC GHz). l Gold-plated center contact resists deterioration over years of use. l Solder center contact and crimp sleeve Be sure to use Canare Crimp Tool. MVP-C4 Mini-Weco Video Patch Cord (see page 8) Video Conversion Connectors BCJ-VWP BNC (female) - Video plug (W.E.Standard) BCJ-VWP BCJ-MVP BNC (female) - Mini-WECO Video plug Standard Package: BCJ-VWP (1 pcs), BCJ-MVP (1 pcs) Note: BCJ-MVP is recommended to use with Slim BNC plug. (see page 1) BCJ-MVP BCJ-VWP BCJ-MVP 7
4 S S 75 WILL VOID WAANTY 75 WILL VOID WAANTY 75 WILL VOID WAANTY Ordering Information Ordering Information 2DV (1U) Number of Video Jacks 2 2 pcs pcs pcs Circuit Type Blank S Straight Through Circuit Type Blank S Straight Through (126.8) (2.2) 4-7x1 Standard Video Patchbays 26 DV S - 5-2U Mid-size Video Patchbays 2 MD - ST S - 1-2U Note: 1) 4 U type is available in black color only 2) 4 U type can not be recessed. Designation Strip Dimensions 1 U: 426 mm x 6.2 mm 2 U: 42 mm x 18.4 mm 4 U: 4 mm x 1.2 mm 2MD-ST-2U (424) 12.7 ack Unit (height) Blank 1 U 2U 2 U Panel Color Blank Black 1 Brown 2 ed Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White ack Unit (height) & Number of Video Jacks Blank 1 U, 2 Jacks 2U 2 U, 2 Jacks 4U 4 U, 96 Jacks Panel Color Blank Black 1 Brown 2 ed Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White (126.8) (7.4) (7.4) (2.2) (1.) x1(oval) 2 24DV (1U) 4-7x DV-2U (2U) (.6) DVJB-S 4-7x1 (7.4) DVJB-S DVJB-S DVJB-S 2MD-ST 4-7x1 2MD-ST-4U DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S 427 DVJB-S (424) DVJB-S 16 DVJB-S DVJB-S 4 (1.5) DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S DVJB-S MDVJ-S MDVJ-S MDVJ-S Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 71
5 Unloaded Video Jack Panels, S422 Patchbays Unloaded Video Jack Panels VJ2-V24-1U-BLK Panel Size VJ2-V2-1U-*** 1 U 2 ch (4 holes), for DVJB VJ2-V2-2U-*** 2 U 2 ch (4 holes), for DVJB VJ2-V24-1U-*** 1 U 24 ch (48 holes), for DVJB VJ2-V24-2U-*** 2 U 24 ch (48 holes), for DVJB VJ2-V26-1U-*** 1 U 26 ch (52 holes), for DVJB VJ2-V26-2U-*** 2 U 26 ch (52 holes), for DVJB MJ2-M2-1U-*** 1 U 2 ch (64 holes), for MDVJ MJ2-M2-2U-*** 2 U 2 ch (64 holes), for MDVJ VJ2-M2-4U 4 U 96 ch ( x 2 ch, 192 holes), for MDVJ (Color: Black) (7.6) MJ2-M2-2U-BLK *** : Please see the following ordering information for complete model number. <Ordering Information> (2) 424 Panel Size 1U 2U 4U 1 U 2 U 4 U Coding Ex. VJ2 - V2-2U - BLK Color Codes BLK Black BN Brown ED ed OG Orange YEL Yellow GN Green BLU Blue PPL Purple GY Gray WHT White (.6) x1 VJ2-M2-4U (1.5) S422 Patchbays 4 Panel Size Connectors Front Panel ear Panel S-422-1U-16 1 U Bantam D sub 9P(F) 16 S-422-1U-24 1 U Bantam D sub 9P(F) 24 S-422-2U-2 2 U Bantam D sub 9P(F) 2 S-422-2U-48 2 U Bantam D sub 9P(F) 48 l The S422 serial signal used for VT remote applications can now be switched with Bantam patchbay ease. l D sub screws are M2.6 * Listed above items are other manufacturer s products. S-422-2U-48 BANTAM jack Dsub 9P(F) A A1 B B1 S-422-1U-24 S-422-2U-48 72
6 Connector Panels Pre-Loaded A/V Connector Panels Key Features and Benefits l Isolated BNC, CA, F, XL on same panel l Clear plastic cover, full screen desi-strip n XL Connector Panels 161U-X12F 162U-X21 n BNC Connector Panels 161U-JU Type Panel Size Loaded Connector Panel P/N 1 U 2 U 161U-X1F XL-1F77 (16 pcs) Dimensions (mm) x x U-X2F XL-2F77 (16 pcs) x x U-AS1 XL-1F77 (8 pcs, Left) 161U-X12F x x 9.7 XL-2F77 (8 pcs, ight) 161U-B1 NCFD-LX-B (16 pcs) x x 1. 1U-AS1D 161U-B2 NCMD-LX-B (16 pcs) x x U-X21 162U-X22 XJM-PFA (16 pcs, Upper ow) XJF-PMA (16 pcs, Lower ow) 2U-AS7.1 x x 217 XJM-PFA (2 pcs, 2 rows) Type Panel Size Loaded Connector Panel P/N XL Panel Mount Adapters 1 U Front ear XJM-PFA XL pin (M) XL pin (F) XJM-PMA XL pin (M) XL pin (M) XJF-PFA XL pin (F) XL pin (F) XJF-PMA XL pin (F) XL pin (M) l XJ series are XL full compatible. l XL jack to jack extremely reduce installation hours ±.2 ±.5 2 ±.2 ± ±.2 Blank Panels 2.5 ±. (65.77) BP-DXF l Easy and quick snap-on mounting without any tools l Can be used for both ITT XL-F77 and Neutrik D holes Note: Panel thickness range: t 1.2 to t mm 1 Dimensions (mm) 161U-JU BCJ-JU (16 pcs) 1U-AS1 x x U-JUDB BCJ-JUDB (16 pcs) 1U-AS1D x x U 162U-JU BCJ-JU (2 pcs, 2 rows) 2U-AS7.1 x x ±.2 ±.5 2 ±.2 ± ±.2 Flange Type ITT XL-F ±. (59.4) l Variety of panel options l Most popular panel holes XL F-77 and Neutrik D available PUSH ±.2 ±.5 2 ±.2 ± ± ±. (75.87) BP-DXF BP-DXF XJF-PMA XJM-PMA ±.2 ±.5 2 ±.2 ± ±.2 BP-XF 2.5 ±. (69.) XJM-PFA XJM-PMA XJF-PFA XJF-PMA BP-DXF (2 pcs) Snap-on blank panels for both ITT XL-F77/Neutrik D holes BP-XF (1 pcs) Blank panels for ITT XL-F77 hole with screws BP-D (1 pcs) Blank panels for Neutrik D hole with screws 7 Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies
7 Connector Panels Unloaded A/V Connector Panels Panel Type AS1 (D) AS (D) AS5 (D) AS7 (D) Variable panel Variable panel Flat panel Flat panel w/cable tie bar w/cable tie bar w/cable tie bar short type Long type 1U-AS1 (D) 1U-AS (D) 1U-AS5 (D) 1U-AS7 (D) 1 U 16 holes x 1 row Depth (mm) U-AS1 (D) 2U-AS (D) 2U-AS5 (D) 2U-AS7 (D) 2 U 16 holes x 2 rows Depth (mm) U-AS1 (D) U-AS (D) U-AS5 (D) U-AS7 (D) U 16 holes x rows Depth (mm) Panel Height, Number of holes and ows 1U 1 U, 16 holes, 1row 2U 2 U, 2 holes, 2rows U U, 48 holes, rows Ordering Information 1U - AS D Hole Type Blank ITT XL-F77 Type D Neutrik D Type AS AS5 AS7 NOTE: l Depending on their length, some connectors can not be mounted on the panel with a cable tie bar installed. Variable panel can be recessed mm. Panel Type AS1 Flat panel Flat panel w/cable tie bar Variable panel w/ cable tie bar - short depth Variable panel w/ cable tie bar - long depth n elated Products M-MA1U2 M-MA2U2 M-MAU2 DS1-AS4 1 U mounting brakets for a Variable panel, 2 pcs. (left and right) 2 U mounting brakets for a Variable panel, 2 pcs. (left and right) U mounting brakets for a Variable panel, 2 pcs. (left and right) Designation strip for Canare A/V connector panels, 2 pcs. Examples of Custom-Made Connector Panels 1U-AS + XL-1F U-AS7 + XL-2F XL-1F U-AS7 (box type) Connectors can be mounted on the both side. n Connectors Canare Flush-mount BNC, F, CA and XL (ITT XL-F77 or Neutrik D type) are available. n Options A) ear Panel A connector panel can be mounted on the rear. B) Box Type A connector panel, top plate and bottom plate can be mounted on the rear. C) ecessed Variable panel can be recessed mm by changing the screw positions of the mounting brackets and can be recessed either 5 mm or 75 mm by changing the mounting brackets to M-MA*U2. Options AS1 (D) AS (D) AS5 (D) AS7 (D) A) ear Panel N/A N/A Available Available B) Box Type N/A N/A N/A Available C) eccesed N/A N/A Available Available 74
8 Audio Patchbays Audio Patchbays The gold alloy cross bar contact, which features a low faulty contact rate, is used for the jacks. l 481U patchbay can be recessed mm by changing the screw positions on the mounting brackets. Connector 481U-82AQ Bantam Patchbay 82AQ 96 Connector 48-12A/82AQ/EIA Bantam Patchbay 82AQ A/62A/EIA Skini Patchbay 62A A/2A/EIA Maxi Patchbay 2A 52 * Listed above items are other manufacturer s products. Audio Patchbays elated Products 2A Maxi Jack 62A Skini Jack 82AQ Bantam Jack ABJ-DC Bantam Jack Dust Cap (1 pcs/pkg) NPTMC-B Maxi/Skini Plug PH5-A Maxi/Skini/Video Patch Cord Holder PH5-B Bantam Patch Cord Holder DS1-AS1 Designation Strip for Bantam (2 pcs.) DS1-AS2 Designation Strip for Skini (2 pcs.) DS1-AS Designation Strip for Maxi (2 pcs.) * Listed above items are other manufacturer s products. Technical Note <Wiring formats connecting upper and lower connectors> F: Full normal connection Output jack Input jack Upper row Lower row (Cross bar contact) Top view (Conventional from) Top view Full Normal Format (series) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is not connected to the lower jack. A signal can be entered by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. Bantam Jack 82AQ Skini Jack 62A Maxi Jack 2A Bantam patch panel 481U-82AQ Bantam patch panel 48-12A/82AQ/EIA 481U-82AQ 2-12A/62A/EIA Panel Hole Dimensions Panel Hole Dimensions Panel Hole Dimensions BC * M (See page 85 for patch cords.) 48-12A/82AQ/EIA 612A/2A/EIA Patch Cord Holder Capable up to 5 patch cords. Easy to install on the wall or side of rack. PH5-A for Maxi/Skini, Video cords. PH5-B for Bantam cords. Audio Patchbay Normaling s Output from a device is obtained from the upper row, while input to a device is normally connected to the lower row. Users can select from the following three types of connecting functions. H: Half normal connection Output jack Input jack φ.56 φ4.5 φ.96 φ6.5 φ (1) φ Upper row 長穴 φ6.5±.8 M2.5 or M2.6 (flat head) Lower row Half Normal Format (half-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. Signals are input by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. 6.4 ± M (flat head) 7.9±.1 φ8.8±.8 M (round head) 9.5±.1 φ11.6±.8 W: Double normal connection Output jack Input jack Upper row Lower row Double Normal Format (series-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. A signal can be entered by inserting another plug in the lower jack. Note that the signal in this case is connected to the upper jack. This can be prevented by inserting a dummy plug. Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 75
9 Audio Patchbays n Wired Box Type Size Bantam Skini Maxi *481U-WB* can be recessed mm *9-62 connector is identical to ELCO V connector Front Connector ear 481U-WBF 1 U 82AQ U-WBH 1 U 82AQ U-WBW 1 U 82AQ U-WBS 1 U 82AQ WB-F 1 U 82AQ WB-H 1 U 82AQ WB-W 1 U 82AQ WB-F 1 U 62A WB-H 1 U 62A WB-W 1 U 62A WB-F 1 U 2A WB-H 1 U 2A WB-W 1 U 2A Bantam wired box 481U-WB* Bantam wired box 48WB-* Maxi wired box 26WB-* 9-62 n Wired Panels Type Bantam Skini Panel 1 Panel 2 Size Connector Size Connector 48XP-F 1 U 82AQ 96 XL-1F77 48 U 2 XL-2F XP-H 1 U 82AQ 96 XL-1F77 48 U 2 XL-2F XP-W 1 U 82AQ 96 XL-1F77 48 U 2 XL-2F XP-F 1 U 62A 64 4 U XL-1F77 2 XL-2F77 2 2XP-H 1 U 62A 64 4 U XL-1F77 2 XL-2F77 2 2XP-W 1 U 62A 64 4 U XL-1F77 2 XL-2F77 2 *Cables are 2 meters in length. Skini wired panel 2XP-* Normaling Options F: Full normal 481U-WB* H: Half normal 48WB-* W: Double normal 48XP-* S: Single (No normal) TC**B (See page 85 for patch cords) 9-62 Connector Format (Wired box) <ear panel> Bantam Lower row ~48 ch Upper row ~48 ch Lower row 1~24 ch Upper row 1~24 ch Skini Lower row 17~2 ch Upper row 17~2 ch Lower row 1~16 ch Upper row 1~16 ch Maxi Lower row 14~26 ch Upper row 14~26 ch Lower row 1~1 ch Upper row 1~1 ch 9-62 connector is mated with 9-68 connector requires either 1 or 5 contact and 9-T cover for assembling. <Wired box side> <Cable side> ( V) ( V) 1 : Solder type ( ) Contact 5 : Crimp type ( ) Cover 9-T : Top entrance ( T) *The numbers in parentheses are ELCO ordering codes. ** Contact extraction tool: Crimping pliers for 5: (AWG #18), (AWG #2-#22), (AWG #24-#26). Wiring Table for 9-62 Channel no. Maxi Skini Bantam SHIELD A H B J S C K T D L U E M V F N W X AE AM Y AF AN Z AH AP AA AJ A AB AK AS AC AL AT BJ BS BY BK BT BZ BL BU CA BM BV CB BN BW CC BP BX CD 19 4 CF CN CW 2 CH CP CX CJ C CY CK CS CZ 2 47 CL CT DA CM CU DB 76
(db)
75 Video Patchbays 75 Video Patchbays 3G-ready HD-SDI video patchbays featuring Canare s uniquely-developed rotary switches. Panel Size Loaded Video Jacks 2DV 1 U 2 x 2DVS 1 U 2 x DVJB-S 2DV-2U 2 U 2 x
More informationSPARE CONNECTORS KTM 2014
SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3208201EN CONTENT CONNECTORS FOR WIRING HARNESS AA-AN CONNECTORS FOR WIRING HARNESS AO-BC CONNECTORS FOR WIRING HARNESS BD-BQ CONNECTORS FOR WIRING HARNESS BR-CD
More informationSPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN
SPAREPARTSCATALOG: CONNECTORS ART.-NR.: 3CM3208201EN CONTENT SPARE CONNECTORS AA-AN SPARE CONNECTORS AO-BC SPARE CONNECTORS BD-BQ SPARE CONNECTORS BR-CD 3 4 5 6 SPARE CONNECTORS CE-CR SPARE CONNECTORS
More information22ND CENTURY_J1.xls Government Site Hourly Rate
Escalation rate 000 AA0 Administrative Assistant Level I 000 AA0 Administrative Assistant Level II 000 AB0 Application Engineer Level I 000 AB0 Application Engineer Level II 000 AC0 Application Programmer
More informationAppendix 5-1: Attachment J.1 Pricing Table -1: IMS Ceiling Loaded Rates at Contractor Site
Appendix 5-1: Attachment J.1 Pricing Table -1: IMS Ceiling Loaded Rates at Contractor Site Escalation rate 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 4.6% 0001 AA01 Administrative Assistant Level I $51.00
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/128D 18 April 2013 SUPERSEDING MIL-DTL-55302/128D 4 June 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, DOUBLE ROW, 4 THROUGH
More informationOPAL-RT FIU User Guide.
OPAL-RT FIU User Guide www.opal-rt.com Published by Opal-RT Technologies, Inc. 1751 Richardson, suite 2525 Montreal, Quebec, Canada H3K 1G6 www.opal-rt.com 2013 Opal-RT Technologies, Inc. All rights reserved
More informationLevel instruments. Communications and Displays SITRANS RD200. 5/306 Siemens FI Technical specifications. Overview
Overview The is a universal input, panel mount remote digital display for process instrumentation. Benefits Easy setup and programming via front panel buttons or remotely using RD software Display readable
More informationPATCH PANEL Easy Patch INSTRUCTION MANUAL
Page 1 BDA90-1 PATCH PANEL Easy Patch 96 Bantam (TT) Jacks EDAC 56-pin termination NPPA-TT-E56 INSTUCTION MANUAL Easy Patch NPPA-TT-E56 INSTUCTION MANUAL Page 2 BDA90-1 Index 1. Electrical configuration...
More informationGL2200 MIXING CONSOLE
GL2200 MIXING CONSOLE SYS-LINK EXPANDER OPTION This option connects a GL2200 console as a channel expander to a second console with just one or two interconnecting cables. Kit GL2200-SL1 = SINGLE Single
More informationXLR3-11C (female) NK27-21C-R (female) + NK-AD1-R (barrel extension) NK27-22C-R (male) + NK-AD1-R (barrel extension)
Overview Snake Trunk System Example Junction Box Fantail Cable Reel Snake Junction box 6JF PA mixer Snake trunk 6C0-E Junction box 6JF input output Connectors used with Canare multiannel cable
More information2015 ECA TELECOM OPTIONS REVIEW
2015 ECA TELECOM OPTIONS REVIEW INTRODUCTION WHAT ARE TELECOM PLATES: 3.18 ECA Telecom Plates are proprietary and designed to fit into any ECA power solution that includes a telecom plate cutout. Each
More informationTerminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
More informationCat.6/5e UTP Patch Panels with 45 Jack
Cat.6/5e UTP Patch Panels with 45 Jack Index TOOL KITS TOOL WIRING CONNECTORS LAN/DATACOMM INSTRUMENT MISCELLANEOUS POWER TOOLS FIBER OPTICS MAGNIFICATION & Our Cat.6/5e patch panels are used for high
More informationIndustrial Wireway & Trough
308 Lay-In Wireway 1485 Series - NEMA 12... 310-319 Wiring Trough 1486 Series - NEMA 12... 320 Pull Through Wireway 1487 Series - NEMA 12... 322-328 309 1485 Series Lay-In Wireway - NEMA 12 Lay-In Wireway
More informationParts List, Charging Chart, Wiring Diagrams
Parts List, Charging Chart, Wiring Diagrams PHH150, PHH180 3 Phase PACKAGE HEAT PUMP UNITS TABLE OF CONTENTS PARTS LIST------------ 2-5 PARTS DRAWING - - - - - - -6-16 CHARGING CHARTS - - - - - - - 17
More informationTelephony Multi-Taps. 9000T-TP Series
9000T-TP Series The 9000T-TP series 1 GHz twisted-pair power multi-tap taps off part of its input RF and AC, but lets the rest pass through. It divides the tapped-off signal and power into multiple outputs,
More informationModular Systems and Cable Management UniPatch Modular System Overview
UniPatch Modular System Overview The UniPatch modular patching system with universal chassis allows you to combine data, audio, and video patching modules in a single two-rack-unit modular panel. Order
More informationWorking with Data sent to a Computer or Flash Stick
Working with Data sent to a Computer or Flash Stick File Names and File Formats Data sent to a flash stick is saved as a.txt file. The file name for the saved file is in the format: DATA FILE TYPE Send
More informationPlug-in unit extension block One sensor extension block allows four plug-in units to be added. Power cable for sensors. Snap-connector inputs
1 Sensor Block for SC Quick connection of 16 sensors Set of 16 inputs directly hooked up to PLC Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationBOOK-IT 8.0. SIP2 implementation in the Z39.70 server
BOOK-IT 8.0 2015-07-29 Axiell Sverige AB, Box 24014, 224 21 LUND. Besöksadress: Fältspatsvägen 4, 224 78 LUND Tel 046-270 04 00, e-post: axiellsverige@axiell.com, www.axiell.se Table of contents 1 Introduction...
More informationModular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
More informationJack Plates. Jack Plates & Accessories PREMIER. PT-625B1 Flush Jack. PREMIER PT-625B3 Flush Jack
Jack Plates PT-625B1 Flush Jack PT-625B1 Flush Jack Flush jack assembly is designed for flush mounting in a standard outlet box. It includes a 625F modular jack, 19A faceplate, 43A bracket, and mounting
More informationConstruction. Quality Products. Service Excellence.
1485 Series - NEMA 12 www.hammondmfg.com Application Designed to enclose and protect electrical wiring from dirt, dust, oil and water. All sections and fi ttings are completely open on each side to allow
More informationProduct information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361
Product information 19" 3U Global Patch Panel 48xRJ45/u, Cat. 6, partly populated R302361 1 Pcs. 19" 3U Global patch panel/u incl. cable tie shelf 12 connection module holders Global/u 3 Global blind covers
More informationUTME 6. Extract from the online catalog. Order No.:
Extract from the online catalog UTME 6 Order No.: 3047400 Test disconnect terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG: 24-8, Width: 8.2 mm, Color: gray, Mounting
More informationAccessories Bus Terminals
Accessories s Connectors Lightbus Z1000 Z1010 Z1020 standard connector for 1,000 µm plastic fibre standard connector for 200 µm PCS fibre coupling for Z1000 PROFIBUS ZB3100 ZB3101 ZB3102 ZS1031-3000 ZS1031-3500
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationHD DIGITAL VIDEO A/B SWITCH INSTALLATION MANUAL
DVS772HD HD DIGITAL VIDEO A/B SWITCH INSTALLATION MANUAL IB6445-01 DESCRIPTION The DVS772HD high definition DIGITAL VIDEO SWITCH is a high isolation high frequency relay used to switch digital signals
More informationDX07 Series USB Type-C Connector
v3.0 DX07 Series USB Type-C Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2017, Japan Aviation Electronics Industry, Ltd. JAE DX07 Series USB Type-C
More informationStandard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
More informationORTRONICS CLARITY HIGH DENSITY COPPER SOLUTION MAXIMIZE YOUR CABLING DENSITY, REDUCE YOUR FOOTPRINT. designed to be better.
ORTRONICS CLARITY HIGH DENSITY COPPER SOLUTION MAXIMIZE YOUR CABLING DENSITY, REDUCE YOUR FOOTPRINT designed to be better. Legrand HDJ patented, recessed angled modular patch panels combine with Legrand
More information3 Series Thumbwheel Switches
Features/Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Illuminated models available Typical Applications Test & measurement
More informationDigital Lighting Systems, Inc.
, Inc. PD402-DMX Four Channel Dimmer and Switch Packs 4 x 2.5 Amps @ 6VDC to 24 VDC DMX52 compatible DMX52 4 x 2.5 Amps Dimmer Pack C UL US LISTED Digital Lighting Systems, Inc. USER'S MANUAL User's Manual
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More information2-Type Series Pressurized Closures
2-Type Series Pressurized Closures A complete pressure tight reenterable closure system for enclosing spliced connections of communications cables in a wide variety of applications. The 2-type Closure
More informationInstallation Instructions
Second Kit for the GrandSTAR Jukebox Kit #26694913 Purpose: These instructions outline the procedures to install a second 1000W into the GrandSTAR jukebox with the AV controller (shown) or the 4 Channel
More informationHex and O Crimp [.572] Dia. Max. Interchangeable Dies for Interchangeable Termination
BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling
More informationRH-8 Headphone Station. Installation Guide
RH-8 Headphone Station Installation Guide 2 RH-8 Installation Guide Contents Safety Information...4 Introduction...4 What s in the Box... 5 Top view... 6 Base view... 7 Installation...8 Connections...
More informationGateway Ascii Command Protocol
Gateway Ascii Command Protocol Table Of Contents Introduction....2 Ascii Commands.....3 Messages Received From The Gateway....3 Button Down Message.....3 Button Up Message....3 Button Maintain Message....4
More informationAmphe-Lite Series contacts, sealing plugs, plastic dust caps
contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105
More informationInstruction Manual. G.R.A.S. 12AA 2-Channel Power Module with gain, filters and SysCheck generator. LI April 2015
Instruction Manual G.R.A.S. 12AA 2-Channel Power Module with gain, filters and SysCheck generator LI0104 20 April 2015 www.gras.dk Power Module Type 12AA Revision 20 04 2015 CONTENTS 1. Introduction and
More informationSmall Products Technical Manual for Powered and Passive Plates
Small Products Technical Manual for Powered and Passive Plates Part # Page StudioHub+ Standard Pinout Illustration 1 Active (Powered) MatchJacks MatchJack Preamp, Input MJ-IN 2 MatchJack Preamp, Output
More informationVARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
More informationCX BD series. Main features MULTIPOLE CONNECTORS CX BD CN
MULTIPOLE CONNECTORS CX BD CN i CX BD series Main features To be able to use round shielded connectors series MIXO BUS (multiaxial, for balanced cables with multiple pairs) or coaxial connectors (for coaxial
More informationE1135C PDU and Pod Upgrade Procedure
E4030-90010 Rev. B 12/2003 In this Document... Tools Needed, 2 Contents of the Upgrade Kits, 2 Installation Procedures, 4 Verifying the Power Option of the New PDU, 4 Removing the PDU from the Support
More informationWAV-5 WAV-5C WAV-3 WA-1H WAV-1R WAV-1RP
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: WAV-5 WAV-5C WAV-3 WA-1H WAV-1R WAV-1RP Wall Plate Series P/N: 2900-300124 Rev 2 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationACCESSORIES CONTENTS CABLE TERMINATORS PAGE
ACCESSORIES CONTENTS PAGE Cable Terminators... 403 Taper Sleeves... 406 Coloured Plastic Caps... 407 Fastening Screws... 407 Insulating Washers... 408 Solder Tags... 409 Component Container SUCOBOX...
More informationDigital Lighting Systems, Inc. PD405-DMX. Four Channel Dimmer and Switch Packs. DMX512 compatible. PD405-DMX-24DC DMX512 4 x 5 Amps Dimmer Pack
Digital Lighting Systems, Inc. PD405DMX Four Channel Dimmer and Switch Packs DMX52 compatible PD405DMX24DC DMX52 4 x 5 Amps Dimmer Pack C UL US LISTED www.digitallighting.com Digital Lighting Systems,
More informationWIRELINE SAFTEY SWITCH PANEL ALS1A006
WIRELINE SAFTEY SWITCH ALS1A006 WIRELINE SELECR SWITCH WIRELINE RESISTANCE TESTING GALVOMETER FOR BLASTING CAP RESISTANCE TESTING WIRELINE LOCK OUT KEY SWITCH WIRELINE SAFETY SWITCH APRIL 2015 Page 1 of
More informationSR60 Busbar System 2/1 2/2. General Data. 2/3 Busbar routing. 2/7 Mounting components. 2/13 Accessories
/ SR0 Busbar System General Data / Busbar routing / Mounting components / Accessories / SR0 Busbar System General Data Overview The SR0 busbar system is a modular system for busbars, for installation in
More informationMU Type Fiber Optic Connectors
Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6. intermate
More informationACCESSORIES. Contents. Cable Terminators
ACCESSORIES Contents Cable Terminators Cable Feed Throughs Taper Sleeves Coloured Plastic Caps Fastening Screws Insulating Washers Solder Tags Component Container SUCOBOX Accessories for SK Connectors
More informationSwitches Selector Chart
Seal Type Switches Switches Selector Chart Turquoise Stroke Mini Switches Turquoise Stroke Switches ABJ (BJ) Turquoise Switches ABS (BS) Turquoise Switches ASQM Miniaturization achieved with changing from
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationProximity sensors, block design
Proximity sensors, block design Proximity sensors, block design Product range overview Measuring principle Version Type Mounting Switching element function Switching Electrical connection N/O contact N/C
More informationORIGINAL CABLE PLATES
Since 1998, DataComm Electronics has been pioneering innovative solutions for structured wiring. Industry-wide, we are known as the manufacturer who listens to customers, delivering the reliable and affordable
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationStandard Buccaneer - Ethernet
IP6 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k or compliant PUR / PVC jacket on cable Shielded system or shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB
More informationRound Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
More informationWINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
More informationInterconnect Product CATALOG Q700
onents.com Interconnect Product CATALOG Q700 Quest Network Quest Network Warranty Products Warranty Que st Technology International Inc., carries a LIFETIME warranty on all Category- Rated link components
More informationALLPLASTICS ENGINEERING PTY LTD P: (02) F: (02) E:
Counter Standing: SINGLE, DUAL AND MULTI-COMPARTMENT LEAFLET HOLDERS 1/3 A4 SIZE STANDS C104 2C112 2C110 3C104 3C110H 1 /3 rd A4 104mm x 32mm Double DL & 1 /3 rd A4 112mm x 32mm x 2 2 compartment DL 1
More informationnls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationATM SERIES ATM Series
SERIES Series CONNECTOR SOLUTIONS 21 Series Overview Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications, while still maintaining the strengths
More informationNational Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia
National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More information11525A 11524A
8 Typical Configuration 11900A 11901A 11904A 8059A 1250-1159 1250-1748 85058-60007 11900C 11901C 11901D 11904C 11904D 8059C 1250-1462 85058-60009 1190A 1250-166 1250-174 11525A 11524A 11852B 11852B Option
More information8WH5 Combination Plug-In Terminals
8WH Combination Plug-In Terminals /2 Introduction / 8WH through-type terminals 1) /7 8WH hybrid through-type terminals with ipo connection /8 8WH9 plugs 1) 1) Also available as a PE version More technical
More informationMachine Vision Systems
Overview Function Image types The optical path of the lens is defined by its construction. For spherical lenses the solid angle depends on the focal length, focus adjustment and aperture; all rays run
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More informationCALRAD 30 series - Audio Connectors
30 series - Audio Connectors 30-607-Bk 30-607-RD Locking RCA plug for up to 8 mm wire. Locking black chrome barrel comes with black or red color ID band. Teflon insulator..35 cable LoCkiNg RCA plugs Twist
More informationStandard Configuration - 4) 15 amp power receptacles 1) Cutout for configurable telecom plates. Door Finishes - UL Listed
power modules P-1 conference table power info List Price - PM-P-1-B - $415 Black Laminate Tech Doors PM-P-1-A - $665 Brushed Tech Doors PM-P-1-SS - $685 Solid Surface Tech Doors P-1 Power Module Power
More information62GB. Amphenol Series 62GB. Applications. Features
Applications Features 62GB Amphenol 62GB Series connectors are built to British Standard Specification BS 9522 F00 17 which is similar to US military specification MIL-DTL-26482. They are machined from
More informationService Parts Diagrams. For Model: 2000i-DVS with the NEC VT465 Projector 2000i-DVS with the NEC VT470 Projector
Service Parts Diagrams For Model: 000i-DVS with the NEC VT65 Projector 000i-DVS with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board 000i-DVS Interactive Whiteboard Identifying
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationLevel Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
More information49 Series Connectors and Receptacles. A Comprehensive Line of Rugged, High Amperage Electrical Connections for the Most Demanding Environments
49 Series Connectors and Receptacles A Comprehensive Line of Rugged, High Amperage Electrical Connections for the Most Demanding Environments INTRODUCTION Single Pole Panel Mount Receptacles For Use on
More informationUltra High Density Fiber Enclosure
LightStack Ultra High Density Fiber Enclosure As today s high density Data Centers migrate from 10 to 40 and 100 gigabit speeds, they require low loss fiber connectivity to support multiple mated connections
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationMU Type Fiber Optic Connectors
Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MU Type Fiber Optic Connectors HMU Series Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with
More informationMating connectors and cable sets for valves and sensors in hydraulics
Mating connectors and cable sets for valves and sensors in hydraulics RE 08006/0. Replaces: 04. /4 Table of contents See page to 5 Features Mating connectors and cable sets for the electrical connection
More informationCopper. Patch Panels COPPER CONNECTIVITY. pg. 40. Clarity 10G Patch Panels. Clarity. Patch Panels. Special Application. Patch Panels.
HIGH PERFORMANCE STRUCTURED CABLING PRODUCTS AND SOLUTIONS COPPER CONNECTIVITY Copper Clarity Special Application Ortronics/Legrand continues to lead the industry in patch panel design by fully supporting
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
More information13 - Connectors & cable accessories Contents
Connectors & Cable Accessories Contents D Type Connectors Solder D connectors 114 High density solder D 114 Crimp D 114 Mixed layout D 114 9-25 way D adapters 114 High density D adapters 114 D adapters
More informationKramer Electronics, Ltd. USER MANUAL. Model: WP-101. XGA/Stereo Audio Line Driver
Kramer Electronics, Ltd. USER MANUAL Model: WP-101 XGA/Stereo Audio Line Driver Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 1 3.1 Defining the EDID 2 3.2 Recommendations for Achieving
More informationCross Reference KYCON P/N JST P/N LEOCO P/N DESCRIPTION G CVILUX P/N AMP P/N MOLEX P/N
Cross Reference G CVILUX P/N AMP P/N MOLEX P/N KYCON P/N JST P/N LEOCO P/N DESCRIPTION D 11W1PS Solder Combination Coaxial Plug D-Sub D 11W1SH Right Angle Dip Solder Combination Coaxial Receptacle D-Sub
More informationAE-237. Outdoor Enclosure. Installation Guide. Rev IP Sur veillance. Ordering part no.: G AE-237_V01. Document part no.
AE-237 Outdoor Enclosure Installation Guide Ordering part no.: 900026900G AE-237_V01 Rev. 1.1 Document part no.: 625030701G IP Sur veillance CAUTION: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE
More informationIndustrial Hydraulics FAQs
Industrial Hydraulics FAQs FAQ Title: Z versus K or K0 in model code Category: Proportional & Servo Valves Sub-Category: Directional Control Valves Bosch Rexroth Corporation Hydraulics 5 City Line Road
More informationCHOGORI USA. CAC3 POWER SUPPLY Connector USER-FRIENDLY PERFORMANCE ENGINEERED CONFIGURABLE STANDARD CIRCUIT CONFIGURATIONS
CHOGORI USA CAC3 POWER SUPPLY Connector USER-FRIENDLY PERFORMANCE ENGINEERED CONFIGURABLE Fast and convenient twist locking system. Ergonomic latch design provides easy operation. Safe,Electric shock resistant.
More informationConnector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
More informationA. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.
ENDURA EE500 SERIES ENDURAXPRESS TECHNICAL SPECIFICATIONS SECURITY SYSTEM DIVISION 28 ELECTRONIC SAFETY AND SECURITY LEVEL 1_28 20 00 ELECTRONIC SURVEILLANCE LEVEL 2_28 23 00 VIDEO SURVEILLANCE LEVEL 3_28
More informationService Parts Diagrams
Service Parts Diagrams For Model: 000i-DVX with the NEC MT00 Projector 000i-DVX with the NEC VT0 Projector 000i-DVX with the NEC VT70 Projector Service Parts Diagrams for the Rear Projection SMART Board
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationmodlink msdd Front panel interfaces
Tight and with full visibility The connecting mechanism of the Modlink MSDD with integrated locking mechanism allows the components to be used under protection class IP65. This protection class prevents
More information