The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
|
|
|
- Amelia Hunter
- 5 years ago
- Views:
Transcription
1 Garret 50C TM
2 Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages. Gumstix, Inc. may have patents, patent applications, trademarks, copyrights, trade secrets or other intellectual property rights pertaining to Gumstix products described in this document (collectively Gumstix Intellectual Property ). Except as expressly provided in any written license or agreement from Gumstix, Inc., this document and the information contained therein does not create any license to Gumstix s Intellectual Property. The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions. Copyright c 2016, Gumstix, Inc. All rights reserved.
3 Board Description An DuoVero COM based expansion board, with support for 5.0 Newhaven Capacitive multi-touch screen (screen sold separately) with Ethernet, USB and audio. Board Dimensions 12.0cm x 8.5cm i
4 Contents 1 Modules on Board LCD Display Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (v6) (1) COM Connectors Gumstix - DuoVero COM Connector (v19) (2) Network /100BASE-T (v10) (3) Power Battery & Barrel Power Supply (v1) (4) CoinCell Backup (v3) (11) Backlight Controller (v4) (12) V/1.5A Regulator (v9) (13) V/1.5A Regulator (v9) (14) V/0.6A Regulator (v6) (21) Connectivity HDMI to Parallel Converter (v3) (5) USB-UART (v14) (17) Audio Dual Audio (in / out) (v9) (6) USB Dual Stacked USB Type A (v6) (7) Port USB Hub (v10) (10) Micro-B Jack (v8) (15) Micro-B Jack (v8) (16) Headers Pin Male Header (v8) (8) COM to CSI2 Connector (v6) (9) NC (v6) (25) NC (v6) (26) Sensors Axis IMU (v16) (18) IO Flip-side Tactile Switch (v4) (19) ii
5 Garret 50C iii Flip-side Tactile Switch (v4) (20) Flip-side Green LED (v3) (22) Flip-side Blue LED (v3) (23) Flip-side Red LED (v5) (24) Mechanical Mounting Hole (2.2mm) Mounting Hole (2.2mm) Mounting Hole (2.2mm) Mounting Hole (2.2mm) Module Connections Graph 10 3 Module Power Graph 11
6 Garret 50C 1 1 Modules on Board 1.1 LCD Display Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (v6) (1) A 5.0 inch LCD and a capacitive touch screen connector, mounted on the flipside, that connects to HDMI to Parallel Converter (5) 1.2 COM Connectors Gumstix - DuoVero COM Connector (v19) (2) DuoVero COMs are powered by a dual-core ARM Cortex-A9 with 1GB RAM, booting from an on-board usd card slot. The DuoVero COM connector provides power and signal transmission for the Gumstix DuoVero series of COMs Requires: VCC 3.3 from 3.3V/1.5A Regulator (14)
7 Garret 50C 2 VCC 1.8 from 1.8V/0.6A Regulator (21) The DuoVero connector provides the following outputs: GPMC to 10/100BASE-T (3) CSI21 to COM to CSI2 Connector (9) VBACKUP to CoinCell Backup (11) nreset to 5.0 Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (1) PMIC PWM1 to 20-Pin Male Header (8) GPIO152 to 20-Pin Male Header (8) GPIO153 to 20-Pin Male Header (8) PMIC NRESWARM to Flip-side Tactile Switch (20) GPIO151 to 20-Pin Male Header (8) GPIO156 to 20-Pin Male Header (8) GPIO154 to 20-Pin Male Header (8) GPIO155 to 20-Pin Male Header (8) HSO to Dual Audio (in / out) (6) UART3 to USB-UART (17) GPIO134 to 20-Pin Male Header (8) GPIO135 to 20-Pin Male Header (8) GPIO136 to 20-Pin Male Header (8) GPIO137 to 20-Pin Male Header (8) GPIO112 to 20-Pin Male Header (8) GPIO139 to Flip-side Red LED (24) GPIO110 to 20-Pin Male Header (8) GPIO122 to Flip-side Blue LED (23) nirq to 5.0 Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (1) HDMI to HDMI to Parallel Converter (5) PMIC PWM2 to 20-Pin Male Header (8) SYS EN to: 1.8V/0.6A Regulator (21) Flip-side Green LED (22) FREF CLK1 OUT to COM to CSI2 Connector (9) USB HOST to 3-Port USB Hub (10)
8 Garret 50C 3 VLOGIC to: 10/100BASE-T (3) 20-Pin Male Header (8) USB-UART (17) 9-Axis IMU (18) Backlight Controller (12) COM to CSI2 Connector (9) LINE IN to Dual Audio (in / out) (6) I2C2 to 5.0 Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (1) I2C3 to: 9-Axis IMU (18) COM to CSI2 Connector (9) GPIO138 to HDMI to Parallel Converter (5) BRIGHTNESS to Backlight Controller (12) GPIO168 to COM to CSI2 Connector (9) USB DEVICE to Micro-B Jack (16) GPIO121 to Flip-side Tactile Switch (19) GPIO83 to 9-Axis IMU (18) GPIO82 to 9-Axis IMU (18) GPIO81 to 9-Axis IMU (18) 1.3 Network /100BASE-T (v10) (3) This design offers a 10/100 Base-T Ethernet connection to GPMC on Gumstix - DuoVero COM Connector (2). 1.4 Power Battery & Barrel Power Supply (v1) (4) This module is able provides 5V 5A DC power to circuit board. This power jack provides 5V to the following modules: Dual Stacked USB Type A (7) 20-Pin Male Header (8) 3-Port USB Hub (10)
9 Garret 50C 4 Backlight Controller (12) 3.3V/1.5A Regulator (13) 3.3V/1.5A Regulator (14) CoinCell Backup (v3) (11) The 6.8mm coin cell battery holder offers a short-term backup power option for your design. This battery is connected to VBACKUP on Gumstix - DuoVero COM Connector (2) Backlight Controller (v4) (12) The backlight controller regulates the intensity of illumination on LCD touch displays Converts BRIGHTNESS from Gumstix - DuoVero COM Connector (2) to BACKLIGHT on 5.0 Flip- Side Connector For Newhaven Capacitive Multi-Touch Screen (1) V/1.5A Regulator (v9) (13) This DC to DC step down regulator provides a 3.3V DC output at 1.5A needed by certain components on this board. It is capable of accepting an input voltage between 3.1 to 16V DC. Currently, its input is 5V from Battery & Barrel Power Supply (4). This regulator provides 3.3V to: 5.0 Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (1) 10/100BASE-T (3) HDMI to Parallel Converter (5) 3-Port USB Hub (10) 9-Axis IMU (18) Flip-side Tactile Switch (19) Flip-side Tactile Switch (20) 1.8V/0.6A Regulator (21) Flip-side Green LED (22) Flip-side Blue LED (23) Flip-side Red LED (24)
10 Garret 50C V/1.5A Regulator (v9) (14) This DC to DC step down regulator provides a 3.3V DC output at 1.5A needed by certain components on this board. It is capable of accepting an input voltage between 3.1 to 16V DC. Currently, its input is 5V from Battery & Barrel Power Supply (4). This regulator provides 3.3V to: Gumstix - DuoVero COM Connector (2) COM to CSI2 Connector (9) V/0.6A Regulator (v6) (21) This DC-DC regulator has an integrated inductor and tiny footprint. It provides power to modules that need a 1.8V input. It recieves 3.3V from 3.3V/1.5A Regulator (13). A SYS EN signal is provided by. The following modules receive 1.8V DC from this regulator: Gumstix - DuoVero COM Connector (2) 1.5 Connectivity HDMI to Parallel Converter (v3) (5) This module connects and converts 5.0 Flip-Side Connector For Newhaven Capacitive Multi-Touch Screen (1) to HDMI on Gumstix - DuoVero COM Connector (2) USB-UART (v14) (17) Also known as an FTDI, this USB to UART converter allows a USB connection to the board to behave as a virtual RS232 serial connection. It offers direct and complete access to the system from a development machine. This USB to UART converter connects a host machine from Micro-B Jack (15) to UART3 on Gumstix - DuoVero COM Connector (2). 1.6 Audio Dual Audio (in / out) (v9) (6) These two standard 3-position 3.5mm audio jacks offer stereo line input and stereo audio output. They are connected to Gumstix - DuoVero COM Connector (2).
11 Garret 50C USB Dual Stacked USB Type A (v6) (7) A dual type-a USB host stacked vertically that allows you to connect USB devices to the board. It is connected to: USBH1 on 3-Port USB Hub (10) USBH2 on 3-Port USB Hub (10) Port USB Hub (v10) (10) This USB hub offers three interfaces for USB ports from USB HOST on Gumstix - DuoVero COM Connector (2). This hub is connected to the following USB ports: Dual Stacked USB Type A (7) Dual Stacked USB Type A (7) Micro-B Jack (v8) (15) A USB micro-b port allows your design to connect as a USB device to a USB host. This module is connected to USB DEVICE on USB-UART (17) Micro-B Jack (v8) (16) A USB micro-b port allows your design to connect as a USB device to a USB host. This module is connected to USB DEVICE on Gumstix - DuoVero COM Connector (2). 1.8 Headers Pin Male Header (v8) (8) A header offering up to 20 pins for various GPIO or PWM signals of your choice. This module has the following connections: VOUT from Battery & Barrel Power Supply (4) GPIO154 from Gumstix - DuoVero COM Connector (2) GPIO153 from Gumstix - DuoVero COM Connector (2) GPIO156 from Gumstix - DuoVero COM Connector (2) GPIO155 from Gumstix - DuoVero COM Connector (2)
12 Garret 50C 7 GPIO152 from Gumstix - DuoVero COM Connector (2) GPIO151 from Gumstix - DuoVero COM Connector (2) NC1 from NC (26) NC1 from NC (25) GPIO112 from Gumstix - DuoVero COM Connector (2) VLOGIC from Gumstix - DuoVero COM Connector (2) GPIO134 from Gumstix - DuoVero COM Connector (2) PMIC PWM2 from Gumstix - DuoVero COM Connector (2) PMIC PWM1 from Gumstix - DuoVero COM Connector (2) GPIO110 from Gumstix - DuoVero COM Connector (2) GPIO136 from Gumstix - DuoVero COM Connector (2) GPIO135 from Gumstix - DuoVero COM Connector (2) GPIO137 from Gumstix - DuoVero COM Connector (2) COM to CSI2 Connector (v6) (9) The CSI connector is compatible with Raspberry Pi family cameras. The CSI port is connected to CSI21 on Gumstix - DuoVero COM Connector (2). I2C communication is connected to I2C3 on Gumstix - DuoVero COM Connector (2). REF CLK is provided by FREF CLK1 OUT on Gumstix - DuoVero COM Connector (2) NC (v6) (25) Implemented as a test pad NC (v6) (26) Implemented as a test pad. 1.9 Sensors Axis IMU (v16) (18) This module provides 3-axis acceleration, 3-axis rotational rates and 3-axis magnetic field information. It is connected via a SPI bus. Data-ready pins are provided. Its I2C bus is connected to I2C3 on Gumstix - DuoVero COM Connector (2) It has the following data ready signals:
13 Garret 50C 8 ACCEL DRDY to GPIO81 on Gumstix - DuoVero COM Connector (2) GYRO DRDY to GPIO82 on Gumstix - DuoVero COM Connector (2) MAG DRDY to GPIO83 on Gumstix - DuoVero COM Connector (2) 1.10 IO Flip-side Tactile Switch (v4) (19) This 4.9 sq. mm light touch switch provides a user input for the signal on. It can be found on the flip-side of the board Flip-side Tactile Switch (v4) (20) This 4.9 sq. mm light touch switch provides a user input for the signal on. It can be found on the flip-side of the board Flip-side Green LED (v3) (22) This 1608 standard size green LED, placed on the backside, provides an indicator for the signal SYS EN on Gumstix - DuoVero COM Connector (2) Flip-side Blue LED (v3) (23) This 1608 standard size blue LED, placed on the backside, provides an indicator for the signal GPIO122 on Gumstix - DuoVero COM Connector (2) Flip-side Red LED (v5) (24) This 1608 standard size red LED, placed on the backside, provides an indicator for the signal GPIO139 on Gumstix - DuoVero COM Connector (2) Mechanical Mounting Hole (2.2mm) A #0 mounting hole for securing the board with mounting pins Mounting Hole (2.2mm) A #0 mounting hole for securing the board with mounting pins.
14 Garret 50C Mounting Hole (2.2mm) A #0 mounting hole for securing the board with mounting pins Mounting Hole (2.2mm) A #0 mounting hole for securing the board with mounting pins.
15 Garret 50C 10 2 Module Connections Graph Figure 1: excludes power modules
16 Garret 50C 11 3 Module Power Graph
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Arbor 70C TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
TechNexion PICO SOM Expansion Board
TechNexion PICO SOM Expansion Board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Poblano 43C TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
Toradex Colibri Development Board
Toradex Colibri Development Board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special
Raspberry Pi Compute Development board
Raspberry Pi Compute Development board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect,
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Pepper 43R TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
Overo Conduit LoRa Gateway
Overo Conduit LoRa Gateway Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Pepper DVI TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
Pi HAT Sensor Board TM
Pi HAT Sensor Board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential
Gumstix Pi Compute USB-Ethernet
Gumstix Pi Compute USB-Ethernet TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special
AeroCore 2 for DragonBoard
AeroCore 2 for DragonBoard TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential
AeroCore 2 for Intel Joule Module
AeroCore 2 for Intel Joule Module TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Cobalt MC Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
IOT x86 Joule Gateway
IOT x86 Joule Gateway TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential
Gumstix Pi HAT Sensor board
Gumstix Pi HAT Sensor board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or
ATmega32U4 IoT Weather Station
ATmega32U4 IoT Weather Station TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
RoomSense Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
LPC1788 Mio Board. User Manual. Revision 1.0 1
User Manual http://coineltech.com Revision 1.0 1 Designed by CoiNel Technology Solutions LLP No-32, 2 nd Floor, HAPBCO Tower, 9 th Main, RPC Layout, Hampinagar, Bangalore-560040 State: Karnataka Country:
DATASHEET. MK-070C-HP High Performance 7 Inch Capacitive Touch Display. Amulet. Technologies. July 2015 Revision A
High Performance 7 Inch Capacitive Touch Display DATASHEET July 2015 Revision A Introduction The MK-070C is the newest family member in the Display Module product line. The new 7 Capacitive Display Module
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed
Quick Start Guide. i.mx 6SoloLite Evaluation Kit
Quick Start Guide i.mx 6SoloLite Evaluation Kit Quick Start Guide About the i.mx 6SoloLite Evaluation Kit The i.mx 6SoloLite evaluation kit (EVK) offers a solid platform to evaluate the i.mx 6 series single-core
AlphaBot2 robot building kit for Raspberry Pi 3 Model B
AlphaBot2 robot building kit for Raspberry Pi 3 Model B SKU 110060863 Description This AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B. It features rich common robot functions including
Intel Galileo gen 2 Board
Intel Galileo gen 2 Board The Arduino Intel Galileo board is a microcontroller board based on the Intel Quark SoC X1000, a 32- bit Intel Pentium -class system on a chip (SoC). It is the first board based
Overview of the Raspberry Pi Models 3B & 2B
Overview of the Raspberry Pi Models 3B & 2B (Let's look at the hardware!) Rick Commo, K7LOG Max Vaughan, KF7MAX What's really different between the original 2B and the 3B? Parameter Architecture CPU
IOT-GATE-RPI. Reference Guide
IOT-GATE-RPI Reference Guide 2018 CompuLab No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law, no liability (including
Contents. Text Notations. Copyright. Using the digitizer pen (Optional) 10. Contents 3. Basic Items 4. Using the Slate PC Dock (Optional) 11
Contents Contents 3 Basic Items 4 Overview 5 Setting up the computer 8 Using the digitizer pen (Optional) 10 Using the Slate PC Dock (Optional) 11 Using the Bluetooth Wireless Keyboard (Optional) 14 Text
MYD-IMX28X Development Board
MYD-IMX28X Development Board MYC-IMX28X CPU Module as Controller Board Two 1.27mm pitch 80-pin SMT Male Connectors for Board-to-Board Connections 454MHz Freescale i.mx28 Series ARM926EJ-S Processors 128MB
OK335xS Users Manual Part I - Introduction
OK335xS Users Manual Part I - Introduction Copyright@2013-2014 http://www.arm9board.net COPYRIGHT STATEMENT Contents (content being images, text, programs and scripts) of this manual is copyright Witech
IB112. Freescale I.MX536 ARM Cortex -A8 Embedded BOARD. USER S MANUAL Version 1.0
IB112 Freescale I.MX536 ARM Cortex -A8 Embedded BOARD USER S MANUAL Version 1.0 Acknowledgments Freescale is a registered trademark of Freescale Semiconductor Inc. All other product names or trademarks
User Manual For CP-JR ARM7 USB-LPC2148 / EXP
CP-JR ARM7 USB-LPC2148 / EXP 38 CR-JR ARM7 USB-LPC2148 which is a Board Microcontroller ARM7TDMI-S Core uses Microcontroller 16/32-Bit 64 Pin as Low Power type to be a permanent MCU on board and uses MCU
SABRE Board for Smart Devices
Quick Start Guide SABRE Board for Smart Devices Based on the i.mx 7Dual Applications Processor SMART APPLICATION BLUEPRINT FOR RAPID ENGINEERING (SABRE) Quick Start Guide GET TO KNOW SABRE BOARD FOR SMART
LPC2148 DEV BOARD. User Manual.
LPC2148 DEV BOARD User Manual www.coineltech.com www.coineltech.com Designed by CoiNel Technology Solutions LLP No-816, 2 nd Floor, 4 th B Cross, 9 th A Main, RPC Layout, Vijaynagar, Bangalore-560040 State:
Board satisfies requiremen t? Compliance Directive
1 96s CE Physical Footprint 1.1 Area The board without population of connectors shall fit 1.1.1 Dimensions into a 85 x 54mm footprint +/-0.25mm Connectors should not protrude from the area footprint except
MYD-Y6ULX Development Board
MYD-Y6ULX Development Board MYC-Y6ULX CPU Module as Controller Board 528Hz NXP i.mx 6UL/6ULL ARM Cortex-A7 Processors 1.0mm pitch 140-pin Stamp Hole Expansion Interface for Board-to-Board Connections 256MB
SBC3100 (Cortex-A72) Single Board Computer
(Cortex-A72) Single Board Computer Ultra High Performance SBC with RK3399 (Cortex-A72 x2 + Cortex-A53 x4) @ 2Ghz : Single Board Computer H310: Input (receiver) Module : Output (display) Module D120: 4xCOM
Prototyping Module Datasheet
Prototyping Module Datasheet Part Numbers: MPROTO100 rev 002 Zenseio LLC Updated: September 2016 Table of Contents Table of Contents Functional description PROTOTYPING MODULE OVERVIEW FEATURES BLOCK DIAGRAM
PRODUCT Datasheet TECHNICAL FEATURES
PRODUCT Datasheet TECHNICAL FEATURES Processor: Freescale i.mx6 Series ARM Cortex A9 scalable multicore (single, dual, quad) Clock: 1,2 GHz per core Perfomance MIPS (Coremark): Solo: 1128 (0.94), Dual:
STM32L4R9I-EVAL. Evaluation board with STM32L4R9AI MCU. Features
Evaluation board with STM32L4R9AI MCU Data brief Features STM32L4R9AII6 microcontroller with 2-Mbytes of Flash memory and 640-Kbytes of RAM in a UFBGA169 package 1.2 390x390 pixel MIPI DSI round LCD 4.3
IOT-GATE-iMX7 Datasheet
IOT-GATE-iMX7 Datasheet Industrial Internet of Things Gateway Product Specification v.1.3 Capable, compact, affordable: i.mx7 Dual IoT-Gate has been designed to answer demanding IoT application requirements
CM10 Rugged COM Express with TI Sitara ARM Cortex-A15
CM10 Rugged COM Express with TI Sitara ARM Cortex-A15 Computer-On-Module www.men.de/products/cm10/» TI Sitara ARM Cortex-A15 AM57xx» Single or dual core processor» Built-in quad core PRU and DSP core»
MYD-IMX28X Development Board
MYD-IMX28X Development Board MYC-IMX28X CPU Module as Controller Board Two 1.27mm pitch 80-pin SMT Connectors for Board-to-Board Connections 454MHz Freescale i.mx28 Series ARM926EJ-S Processors 128MB DDR2
LAN9512 Evaluation Board User Manual
Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
Quick Start Guide for i.mx28 EVK. i.mx28 EVK Multimedia and connectivity
Quick Start Guide for i.mx28 EVK i.mx28 EVK Multimedia and connectivity About the i.mx28 Board This section provides information about the i.mx28 Kit Evaluation (EVK) board and the location of the s and
i.mx 6UltraLite Evaluation Kit Quick Start Guide s datasheet has been downloaded from at this pag
i.mx 6UltraLite Evaluation Kit Quick Start Guide s datasheet has been downloaded from http://www.digchip.com at this pag Quick Start Guide About the i.mx 6UltraLite Evaluation Kit The i.mx 6 UltraLite
HYDRA-X23/X23S. Power Application Controllers. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X23/X23S Power Application Controllers PAC5223 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X23/X23S Body Resources...5 Header
EX-9686U/A-L(A9) Hardware User Manual
EX-9686U/A-L(A9) Hardware User Manual Release Notes Version Release Date Notes 1.00 November, 2013 Initial Release 2.00 January, 2014 The 2 nd release Disclaimer This documentation is provided for use
QT3 Xplained Pro. Preface. Atmel QTouch USER GUIDE
Atmel QTouch QT3 Xplained Pro USER GUIDE Preface The Atmel QT3 Xplained Pro is an extension board, which enables the evaluation of a capacitive touch 12 key numpad in mutual capacitance configuration.
ReMutt Control. Critical Design Review
ReMutt Control Critical Design Review The Team Team Leader: Steven Guan Team Members: Eric Brunnett, Daniel Kwak, Joon Hee Lee, Alex Chepilev What is the ReMutt Control? Remote pet feeding system operated
Get Started SUPPORT WARRANTY. Visit the i.mx community at
SUPPORT Visit the i.mx community at www.imxcommunity.org. WARRANTY Visit www.nxp.com/warranty for complete warranty information. Get Started Download installation software and documentation under Getting
Atmel ATMXT143E touchscreen controller Capacitive touch ITO 320 x 240 pixel LCD display with SPI interface LED backlight
APPLICATION NOTE Features Atmel AVR32936: mxt143e Xplained Hardware Users Guide Atmel maxtouch Touchscreen Controller 2.8 inch mxt143e LCD display module from Precision Design Associates (PDA) Atmel ATMXT143E
COSMOS COLLECTOR X10 COSMOS X10 DATA COLLECTION AND REPORTING SYSTEM. User manual
User manual COSMOS COLLECTOR X10 COSMOS X10 DATA COLLECTION AND REPORTING SYSTEM - The data from the source device is collected with Modbus / TCP and S7 protocols via the X10 s Ethernet interface - The
PremierWave 2050 Enterprise Wi-Fi IoT Module Evaluation Kit User Guide
PremierWave 2050 Enterprise Wi-Fi IoT Module Evaluation Kit User Guide Part Number 900-765-R Revision A February 2016 Intellectual Property 2016 Lantronix, Inc. All rights reserved. No part of the contents
MYD-SAMA5D3X Development Board
MYD-SAMA5D3X Development Board MYC-SAMA5D3X CPU Module as Controller Board DDR2 SO-DIMM 200-pin Signals Consistent with Atmel's Official Board 536MHz Atmel SAMA5D3 Series ARM Cortex-A5 Processors 512MB
Part Number: PCB-STM32-F4B1 (unpopulated PCB with Discovery module sockets, no other parts) STM32-F4B1 (assembled board, not presently available)
PCB-STM32-F4B1 Development baseboard for the STMicro Discovery-F4 module (STMicro part# STM32F4DISCOVERY) PCB Rev 1.00 shown. PCB Rev 1.20 has on-board RS232 drivers. Part Number: PCB-STM32-F4B1 (unpopulated
HYDRA-X10. Power Application Controllers TM. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X10 Power Application Controllers TM PAC5210 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X10 Body Resources...5 Header Descriptions...5
Ant6. 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller. Technical Reference Manual PCB Rev 1.0.
Ant6 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller Technical Reference Manual PCB Rev 1.0 www.soc-robotics.com Copyright 2008. SOC Robotics, Inc. 1 Manual Rev 0.9 Warranty Statement SOC Robotics
VENUS_ Driving Board and 39.6 Prism Display
VENUS_ Driving Board and 39.6 Prism Display Table of Contents 1 Hardware Requirements... 1 (1) PACKAGE CONTENTS... 1 (2) VENUS Specification... 2 (3) Prism product Specification... 3 2 Hardware Guide...
Wasp Embedded Controller
Wasp Embedded Controller Wasp16/32/64 Hardware Reference Guide PCB Rev 1.0 WASP16 WASP32 WASP64 MC433 Hardware Reference Guide Manual Revision 0.85 Table of Contents Warranty Statement...2 1.0 Introduction....4
COM-RZN1D - Hardware Manual
COM-RZN1D - Hardware Manual Hardware Manual 4 / 01.10.2018 emtrion GmbH Copyright 2018 emtrion GmbH All rights reserved. This documentation may not be photocopied or recorded on any electronic media without
Quick Start Guide. SABRE Platform for Smart Devices Based on the i.mx 6 Series
Quick Start Guide SABRE Platform for Smart Devices Based on the i.mx 6 Series Quick Start Guide About the SABRE Platform for Smart Devices Based on the i.mx 6 Series The Smart Application Blueprint for
Official Publication Date: 12/18/2018 Official Expiration Date: Until Next Release
Official Publication Date: 12/18/2018 Official Expiration Date: Until Next Release Revision History Version Date Comments 100 12/06/2016 Initial Release 111 6/20/2017 Updated Formatting 112 5/24/2018 Added
Orange Pi User Manual. <Version: V1.0 >
Orange PI User Manual What s Orange Pi? It s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, Cubieboard Image, as well as the banana pi
MYD-C7Z010/20 Development Board
MYD-C7Z010/20 Development Board MYC-C7Z010/20 CPU Module as Controller Board Two 0.8mm pitch 140-pin Connectors for Board-to-Board Connections 667MHz Xilinx XC7Z010/20 Dual-core ARM Cortex-A9 Processor
Creator Ci40 product brief
Creator Ci40 is a high-performance, low-power IoT hub that packs Ethernet, Wi-Fi, 802.11b/g/n/ac, Bluetooth Classic and Low Energy and an 802.15.4 radio onto a powerful IoT gateway with expansion ports
i.mx5x Modular Design Platform: Product Prototyping Accelerator
June, 2010 i.mx5x Modular Design Platform: Product Prototyping Accelerator FTF-CON-F0596 Lalan Mishra i.mx Systems Solutions Manager and Specialist Freescale s i.mx Development Platforms: A Brief History
MYD-JA5D2X Development Board
MYD-JA5D2X Development Board MYC-JA5D2X CPU Module as Controller Board 500MHz Atmel SAMA5D26/27 ARM Cortex-A5 Processor 256MB DDR3 SDRAM, 256MB Nand Flash, 4MB Data FLASH, 64KB EEPROM Serial ports, USB,
Extending startkit using the PCIe slot and slicecards
Extending startkit using the PCIe slot and slicecards IN THIS DOCUMENT Introduction startkit compatible slicecards Designing a slicecard 1 Introduction The flexibility of the GPIO pins on xcore multicore
. Micro SD Card Socket. SMARC 2.0 Compliant
MSC SM2S-IMX6 NXP i.mx6 ARM Cortex -A9 Description The design of the MSC SM2S-IMX6 module is based on NXP s i.mx 6 processors offering quad-, dual- and single-core ARM Cortex -A9 compute performance at
SABRE Board for Smart Devices
Quick Start Guide SABRE Board for Smart Devices Based on the i.mx 6SoloX Applications Processor FREEDOM DEVELOPMENT PLATFORM Quick Start Guide ABOUT THE SABRE BOARD FOR SMART DEVICES BASED ON THE I.MX
Cricket Embedded Processor Dual H-Bridge/Bipolar Stepper Controller
Cricket Embedded Processor Dual H-Bridge/Bipolar Stepper Controller Technical Reference Manual PCB Rev 1.0 www.soc-robotics.com Copyright 2008, SOC Robotics, Inc - 1 - Manual Revision 0.89 Warranty Statement
SOM IB8000 Quad Core SOM (System-On-Module) Rev 1.3
Intel Braswell SOM IB8000 Quad Core SOM (System-On-Module) Rev 1.3 Simple. Robust. Computing Solutions SolidRun Ltd. 7 Hamada st., Yokne am Illit, 2495900, Israel www.solid-run.com 1 Page Document revision
EVB-USB2640 Evaluation Board Revision A
Copyright 2008 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
CB-1 Peripheral Board Technical Manual
CB-1 Peripheral Board Technical Manual Date: 13 May 2007 Document Revision: 1.02 BiPOM Electronics 16301 Blue Ridge Road, Missouri City, Texas 77489 Telephone: 1-713-283-9970. Fax: 1-281-416-2806 E-mail:
xpico 200 Series Evaluation Kit User Guide
xpico 200 Series Evaluation Kit User Guide This guide describes how to setup the xpico 200 series evaluation kit and provides the information needed to evaluate the included xpico 240 or xpico 250 embedded
Zero2Go. User Manual (revision 1.03) Wide Input Range Power Supply for Your Raspberry Pi. Copyright 2017 UUGear s.r.o. All rights reserved.
Zero2Go Wide Input Range Power Supply for Your Raspberry Pi User Manual (revision 1.03) Copyright 2017 UUGear s.r.o. All rights reserved. Table of Content Product Overview... 1 Product Details... 3 Package
IoE Workshop. Marc Khayat, CCIE #41288, Leonard Janer Technical Managers. June 16
IoE Workshop Marc Khayat, CCIE #41288, makhayat@cisco.com Leonard Janer ljaner@inlea.com Technical Managers June 16 2015 Cisco and/or its affiliates. All rights reserved. Cisco Public 2 2016 Cisco and/or
Development Kit. QuickStart Guide O
:: Torpedo :: Development Kit O M QuickStart Guide www.logicpd.comz O QuickStart Guide We fast forward the evolution of new products. Table of Contents 1 Introduction 4 1.1 Scope of Document 4 1.2 Zoom
EVB-USB2250 User Manual Revision B
Copyright 2009 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently,
QT2 Xplained Pro. Preface. Atmel QTouch USER GUIDE
Atmel QTouch QT2 Xplained Pro USER GUIDE Preface Atmel QT2 Xplained Pro kit is an extension board that enables the evaluation of a mutual capacitance touch surface using the Peripheral Touch Controller
MC34708TRN Rev /1/2011
MC34708TRN Rev 3.0 11/1/2011 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, t he Energy Efficient Solutions logo, mobilegt, PowerQUICC, QorIQ, StarCore and Symphony
FriendlyARM. Mini2440.
FriendlyARM Mini2440 www.friendlyarm.net 1 Introduction...3 1.1 Features...4 2 Hardware Resource...6 2.1 Jumpers and Interfaces...6 2.2 Memory Map...7 2.2.1 Memory Adress Allocation...7 2.3 Power Supply...8
Embedded Navigation Solutions VN 100, VN 200 & VN 300 Development Board User Manual
Embedded Navigation Solutions VN 100, VN 200 & VN 300 Development Board User Manual VectorNav Technologies Contact Info 10501 Markison Road Phone +1 512 772 3615 Dallas, Texas 75238 Email support@vectornav.com
Introduction. Rev.1.2
Introduction The Revelation board is an evaluation tool which is designed to help to start working with Riverdi TFT panels with FT8XX controllers. It can also be used as a platform to build your own application.
1 General Description
AS5030 AS5011 8 Low BIT PROGRAMMABLE power Integrated Hall HIGH IC SPEED for MAGNETIC human interface ROTARY applications ENCODER DEMOBOARD DEMOBOARD OPERATION AND MANUAL SOFTWARE OPERATION MANUAL 1 General
SABRE for Automotive Infotainment Quick Start Guide. Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series
SABRE for Automotive Infotainment Quick Start Guide Smart Application Blueprint for Rapid Engineering Based on the i.mx 6 Series About SABRE Platform for Automotive Infotainment Based on the the i.mx 6
USER GUIDE. Atmel QT1 Xplained Pro. Preface
USER GUIDE Atmel QT1 Xplained Pro Preface Atmel QT1 Xplained Pro kit is an extension board that enables evaluation of self- and mutual capacitance mode using the Peripheral Touch Controller (PTC) module.
MYD-C437X-PRU Development Board
MYD-C437X-PRU Development Board MYC-C437X CPU Module as Controller Board Two 0.8mm pitch 100-pin Connectors for Board-to-Board Connections Up to 1GHz TI AM437x Series ARM Cortex-A9 Processors 512MB DDR3
The TechNexion Difference
The TechNexion Difference Faster time-to-market through Open Design System on Modules are designed to speed up and reduce the cost of development for embedded devices. But these benefits are only possible,
OK335x Products Guide. Contents
Contents Contents... 2 Version history... 3 Chapter One General Introduction... 4 1.1 Products Overview... 4 1.2 Application Fields... 5 Chapter Two OK335xD Single Board Computer... 6 2.1 Product Introduction...
Freescale Semiconductor Inc. Microcontroller Solutions Group. FRDM-KL46Z User s Manual FRDM-KL46Z-UM Rev. 1.0
Freescale Semiconductor Inc. Microcontroller Solutions Group FRDM-KL46Z User s Manual FRDM-KL46Z-UM Rev. 1.0 Table of Contents 1 FRDM-KL46Z Overview... 3 2 References documents... 3 3 Getting started...
15.6. TEP Series. Unique Expansion Possibilities. Power and Networking Expansion Modules 10.1
TEP TEP Series Our TEP series is available with either ARM or x86 architecture, and also has an IP65 anodized aluminum enclosure enabling cleaning with water. Moreover, to improve robustness, the design
Your Strategic Partner for Renesas RZ/G1x Products & Solutions
Manufacture Your Strategic Partner for Renesas RZ/G1x Products & Solutions Design Concept ELECTRONICS UNITRONIC GmbH Mündelheimer Weg 9 40472 Düsseldorf Telefon 0211 / 95 110 Telefax 0211 / 95 11 111 info@unitronic.de
EMAC SoM Presentation
EMAC SoM Presentation www.emacinc.com www.emacinc emacinc.com/.com/som System on Module System on Module (SoM( SoM) ) is an alternative to Single Board Computers for Embedded Systems offering a more flexible
2.8 microlcd Intelligent PICASO Display Module
Product Brief 2.8 microlcd Intelligent PICASO Display Module µlcd-28ptu www.4dsystems.com.au Rev 1.2 MESSAGE FROM THE CEO To our valued customers, Thank you for your interest in 4D Systems and the products
96Boards IoT Edition. Low Cost Hardware Platform Specification. Version 1.0, September Specification v Linaro Ltd
96Boards IoT Edition Low Cost Hardware Platform Specification Version 1.0, September 2016 Page 1 of 15 IMPORTANT INFORMATION Copyright 2016 Linaro Ltd. All rights reserved. This document is copyrighted
User Manual Rev. 0. Freescale Semiconductor Inc. FRDMKL02ZUM
FRDM-KL02Z User Manual Rev. 0 Freescale Semiconductor Inc. FRDMKL02ZUM 1. Overview The Freescale Freedom development platform is an evaluation and development tool ideal for rapid prototyping of microcontroller-based
USER GUIDE. Atmel QT6 Xplained Pro. Preface
USER GUIDE Atmel QT6 Xplained Pro Preface Atmel QT6 Xplained Pro kit is a Xplained Pro extension board that enables the evaluation of a mutual capacitance touch suface using the Peripheral Touch Controller
DG0723 Demo Guide SmartFusion2 Imaging and Video Kit MIPI CSI-2
DG0723 Demo Guide SmartFusion2 Imaging and Video Kit MIPI CSI-2 Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100
SBC8140 Single Board Computer
SBC8140 Single Board Computer TI DM3730 Processor based on 1GHz ARM Cortex-A8 core Flexible Design with a Tiny CPU Board mounted on Expansion Board Memory supporting 256MByte DDR SDRAM and 512MByte NAND