USB/SD/MMC/MICRO SD CARD READER SX-4451USD

Transcription

1 PORTABLE USB/SD/MMC/MICRO SD CARD READER SX-4451USD In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference. If you need extra support, please write to

2 CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN Caution: To reduce the risk of electric shock do not open this device, there are not serviceable parts for customers. Please refer any maintenance or repair to qualified personnel. This sign means the existence of dangerous voltage at the inside of the unit, which states a risk of electric shock. This sign means that there are important instructions of operation and handling in the manual that comes with this device. PREMIER CUSTOMER SERVICE Venezuela: Colombia: Panama: Website ELECTRIC ( ) PEJC (7352) servicioalcliente@premiermundo.com NOTE This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology. 1

3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do no place objects filled with liquids, such as vases, on the apparatus. Connect the apparatus to an easily accessible AC outlet. Should you notice an abnormality in the apparatus, disconnect the main plug from the AC outlet immediately. WARNING 1.Battery may explode if mistreated. 2.Do not recharge, disassemble or dispose of in fire. AC operation 1.Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home. 2. Plug the corresponding end of cord into the power socket on the rear of the set. 3. Insert the plug into power supply. Battery operation Insert 4 pcs of C-type (UM2) batteries. Please observe correct battery polarities or the set will not work. Recharging the Battery (Built in Rechargeable Battery) 1.Plug in the power(ac 110/220V)can be automatically charged, It will automatically stop charging when the electricity be saturation.(any state) 2.The first charge must be more than 12 hours 3.Theory of working time is 2 hours Note: This unit does not charge UM2 batteries installed in the battery compartment. DC JACK Recharge of Li-ion battery will not be possible through the DC jack. Accessories 1. AUX/MP3-IN CONNECTOR CABLE 2. Remote controller 3. Power cord 4. Instruction manual 5. SILICA GEL 1 pc 1 pc 1 pc 1 pc 1 pc 2

4 Control elements POWER & Function switch 2.VOLUM button 14.EQ button 15.REPEAT button 3.MODE button 4.Memory card slot 16.PREV / 17.NEXT/ button button 5.Speaker 6.Telescopic antenna 7.Handle 8.Function indicator 9.Band indicator 10.Dial scale 11.TUNING regulator 12.BASS ON/OFF button 18.PLAY/PAUSE button 19.STOP button 20. IR sensor 21.LCD Display 22.Power cord socket 23.Battery options 24.Phone socket 25.AUX/MP3-IN 13.USB port Not indicated: battery compartment (bottom) 3

5 Remote controller (RC) 1. PLAY button 2. AUDIO MUTE button 3. PAUSE button 4.PREV/ button 5. MODE button 6.NEXT/ button 7.VOLUME LEVEL- button 8.EQ button 9.VOLUME LEVEL+ button 10.REPEAT button 11. NUMERIC KEYS PREV NEXT PLAY/PAUSE MODE VOL- VOL+ EQ Changing the battery When the battery becomes weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the Lithium battery. 1. Remove the battery compartment from bottom of the Remote Control. 2. Install 1 CR2025 Lithium battery with the positive side facing up. 3. Replace the battery compartment. Note: Only playback of MP3 is available. LCD Display 1. Message or number indicators. (Title, Chapter, playing time or other information) 2. REP1: Repeat one track/ chapter indicator. REP All: Repeat full disc/ title indicator. 3. USB play indicators. 4. SD/MMC/MICRO SD Card play indicators. 5. : MP3 play indicators. 1 2 : REP USB CARD RADIO operation 1. By factory default, RADIO starts once power is on, 2. Push AM/FM/SW1/SW2 to switch between AM/FM/SW1/SW2 band. 3. Extend the length of the telescopic and to enhance FM reception, turn the unit horizontally to enhance AM reception. 4. Rotate TUNING to tune to a desired frequency. 4

6 Playing MP3 audio from a USB flash 1.Insert a USB Flash, USB function starts automatically. 2.MODE button: Press MODE button to switch between the mode of SD, TF, USB when insert SD, TF, USB card at the same time, (insert single card the MODE button will not function.) 3.SEARCH: short press of moves playback to previous and to the next track. Press and hold to fast backward and to fast forward of the current playing track. 4.Connect the unit's USB to a PC's USB socket, under MS Windows OS, the PC automatically configures to work as a Sound Card and speaker. Playing MP3 audio from a SD/MMC/TF/MICRO SD card 1.Insert a Card, playback starts automatically. 2.MODE button: Press MODE button to switch between the mode of SD, TF, USB when insert SD, TF, USB card at the same time, (insert single card the MODE button will not function.) 3.SEARCH: short press of moves playback to previous and to the next track. Press and hold to fast backward and to fast forward of the current playing track. 4.It also works as a card reader for PC when a SD card is inserted. NOTE: If a USB is inserted, press SD of the function selector to play from a card. If a SD card is inserted, MICRO SD(TF) card can not be inserted at the same time. This product can support memory size of USB/SD/MMC/MICRO SD device up to 16GB. EQ & BASS 1. For playback of MP3, press the EQ button to shift between the 4 sound modes EQ1/EQ2/EQ3/EQ4 2.Press the BASS ON/OFF button to further enhance bass effect. Note : For Radio, only BASS ON/OFF is available. AUX/MP3-IN The unit can be used as an audio amplifier through the AUX/MP3-IN jack equipped. 1.Select function AUX/MP3-IN. 2.Connect the unit's AUX/MP3-IN jack with a 3.5mm stereo phone plug. 3.Connect the other end of the cable to the 5

7 MP3 Player or other audio sources. Slowly adjust the volume of the source equipment to an appropriate level. 4.To change to radio, just unplug the AUX/MP3-IN cable from the jack of the unit. Note: USB/SD/MMC/Micro SD features are not available when insert a AUX/MP3-IN cord. Specifications FM Frequency Range AM Frequency Range SW Frequency Range FM/SW AM Storeage Media Speaker 3.5mm Headphone Socket MHz KHz MHz Telescopic antenna Built-in ferrite bar antenna USB Flash Drive/ SD Card/ MMC Card/ Micro SD Card 66mm cone type(2) For 32 ohm Impedance Headphones Power output 1.8W+1.8W(EIAJ 4OHM x 2) Power requirements Power consumption Dimensions(LxWxH) Weight (excluding batteries) Inputs AUX/MP3-IN DC 6V using 4 size C(R14) batteries or 1 x 6V rechargeable battery AC 110V/220V,60/50Hz 9W 236x170x109 mm 1.1KGS 500mV/50kΩ Specifications and external appearance are subject to change without notice. 6

8 7

9 8

10 9