ECU Measurement and Calibration in a Real-Time Test Environment. Roland Magolei National Instruments Engineering GmbH Embedded Networks
|
|
|
- Loren Ray
- 6 years ago
- Views:
Transcription
1 ECU Measurement and Calibration in a Real-Time Test Environment Roland Magolei National Instruments Engineering GmbH Embedded Networks
2 Term Definitions What is ECU Calibration? Software Optimization of ECU Algorithms When is ECU Calibration typically used? ECU (rapid) Prototyping ECU test Which Standards are used? ASAM Standards CCP (CAN Calibration Protokoll) XCP (Universal Calibration Protocol) ASAM Database configurations (*.a2l)
3 Calibration-Protocols CCP CAN Calibration Protocol Supported Transport Protocols CAN XCP Universal Measurement and Calibration Protocol Supported Transport Protocols TCP/IP, UDP, CAN, USB, FlexRay, LIN Use Cases ECU Parameter Calibration(1D, 2D, 3D) ECU Data acquisition Asynchronous read from Master (Measurement) asynchronous or synchronous Event on ECU Flash Programmiing Use Cases ECU Parameter Calibration(1D, 2D, 3D) ECU Data acquisition Flash Programmiing ECU Stimulation (Sensor Simulation) Bypassing (run test algorithm on Master)
4 ASAM Database File: A2L Official Standard for describing ECU memory layout on an ECU target Information about all relevant ECU data objects Measurements and Set points (1..3D) Memory Addresses, Data Layout, Data Type, etc. Conversion rules Database generated automatically at ECU Software-Compile time
5 Historical Windows ECU Test System incl. ECU Measurements and Calibration (MC) Analog I/O Digital I/O CAN CAN (CCP / XCP ) Test System and COM MCD-3 COM MCD3 Server Test Automtation
6 Test System Historical Test automation Server and Test Execution (HIL System) Single Windows PC plus optional Embedded System (proprietary real time hardware) Calibration System Windows PC connected to Test Automation via e.g. Ethernet / DCOM / MCD3 Not deterministic
7 Historical Real Time Test System incl. ECU Measurements and Calibration (MC) Analog I/O Digital I/O CAN CAN (CCP / XCP ) Real Time Test System HIL COM MCD-3 COM MCD3 Server Test Automation COM MCD-3 COM
8 Real Time Test System Historical Test automation Server Windows PC Real Time Test Execution / HIL System Embedded Test System (proprietary real time hardware) Calibration System Windows PC connected to Test Automation and Real Time System via e.g. Ethernet / DCOM / MCD3 Disadvantage: non deterministic link between Test Automation / Test System and MC System Complex System Integration
9 Test System Requirements Today Open Architecture Extendable Run-time Editable User Interface User Management Scalable Real-Time Stimulus Generation Data Logging in Real-Time Configurable I/O Closed-Loop Control Deterministic Execution Real-Time OS Real-Time Testing and Simulation Software
10 National Instrument: Test Systems Windows PC (LabVIEW, TestStand) Real Time (LabVIEW RT, NI-VeriStand) Office/Lab: Desktop Industrial: PXI Embedded Target FPGA (Compact RIO) Hybrid (Hypervisor) Windows and Real Time System on same target Windows: LabVIEW and/or TestStand Real Time Target: LabVIEW RT or NI-VeriStand
11 NI Real-Time Hypervisor for PXI Multicore PXI Controllers NI Industrial Controller
12 National Instrument: ECU Calibration ECU Meaurement and Calibration Toolkit High-level API for Measurement and Calibration Applications CCP and XCP Master Access of ECU internal data Measurements (DAQ-List) Characteristics (1D, 2D, 3D) Support of ASAM A2L database file configurations Runtime Enviroments Windows (C/C++, CVI, LabVIEW) LV Real Time, LabVIEW FPGA (e.g.compact RIO) Supported Hardware NI-CAN, NI-XNET, NI USB-CAN XCP: Ethernet
13 ECU MC Toolkit API for LabVIEW Easy to use API Channel Name based Example: DAQ-List Read
14 ECU MC Toolkit API for LabVIEW Characteristic Read/Write
15 ECU MC Toolkit API A2L Database Access Example: Datenbase Browser
16 ECU Calibration with NI-LabVIEW
17 Integrated MC Test System with NI Components on Windows Analog I/O Digital I/O CAN CAN (CCP / XCP ) NI DAQmx NI-XNET NI ECU MC Toolkit CAN Bus Test System Restbus Simulation, HIL
18 Integrated MC Test System with NI Components on Real Time Target LabVIEW RT Analog I/O Digital I/O CAN CAN (CCP / XCP ) NI DAQmx NI-XNET NI ECU MC Toolkit CAN Bus NI Hypervisor Windows Real Time Test System Restbus Simulation, HIL, Stimulation Test Automation Windows & LabVIEW RT
19 Summary High performant ECU Test Execution and ECU Calibration is possible on a single target Combine Real Time Test and ECU Calibration Deterministic execution of test and calibration Hybrid (NI Hypervisor) Test Automation, Test Execution and ECU Calibration on same target LabVIEW (RT) plus ECU Measurement Calibration Toolkit Supports all various OS and Hardware targets
ASAM MCD-1 (XCP) Protocol Layer Specification Base Standard
ASAM MCD-1 (XCP) Universal Measurement and Calibration Protocol Protocol Layer Specification Version 1.4.0 Date: 2017-07-01 Base Standard by ASAM e.v., 2017 Disclaimer This document is the copyrighted
Programming for the LabVIEW Real-Time Module Using LabWindows/CVI
Application Note 182 Programming for the LabVIEW Real-Time Module Using LabWindows/CVI Introduction This document discusses using LabWindows/CVI to interface with RT Series hardware and to write DLLs to
Introduction to LabVIEW and NI Hardware Platform
Introduction to LabVIEW and NI Hardware Platform Corrie Botha Platform-Based Approach 2 With LabVIEW, You Can Program the Way You Think 3 With LabVIEW, You Can Program the Way You Think The graphical,
Software-Defined Test Fundamentals. Understanding the Architecture of Modular, High-Performance Test Systems
Software-Defined Test Fundamentals Understanding the Architecture of Modular, High-Performance Test Systems Contents Executive Summary 4 Architecture Layer No. 5: System Management/Test Executive 5 Architecture
Release Presentation. ASAM Common MDF Version Measurement Data Format. Release Date: 2014 / 06 / 11
Release Presentation ASAM Common MDF Version 4.1.1 Measurement Data Format Release Date: 2014 / 06 / 11 Agenda Introduction Key Concepts History ASAM Working Group Deliverables What's new in MDF 4.1.1
National Instruments Approach
National Instruments Approach Our graphical programming software, LabVIEW, and modular, open hardware, has redefined how engineers work throughout the entire product design cycle. Committed to Engineers
With respect to the National Instruments software product(s) being used, the following patents may apply:
PATENT NOTICE National Instruments Software Related Patents With respect to the National Instruments software product(s) being used, the following patents may apply: LabVIEW The LabVIEW software is covered
LabVIEW Communication Techniques for Distributed Applications
LabVIEW Communication Techniques for Distributed Applications Agenda Intro: What is a Distributed Application? Part I: LabVIEW Communication Techniques Part II: Implementing Communication Tasks Distributed
Automated Test Equipments
Automated Test Equipments Elias Nicolas National Instruments - Arabia Tests and Measurements Interactive Measurements Benchtop Non-programmed Automated Measurements Data Acq, Instr I/O Programmed Automated
HIL. Hardware-in-the-loop system for Automotive ECU testing and validation
HIL Hardware-in-the-loop system for Automotive ECU testing and validation What we offer Custome made Hardware-in-the-loop systems for Automotive ECU testing and validation, based on National Instruments
NI Smart Cameras PRODUCT FLYER CONTENTS. Have a question? Contact Us.
Have a question? Contact Us. PRODUCT FLYER NI Smart Cameras CONTENTS NI Smart Cameras Detailed View of ISC-178x Key Features Vision Software Hardware Services Page 1 ni.com NI Smart Cameras NI Smart Cameras
CANape Option Bypassing
Product Information Table of Contents 1 Overview... 3 1.1 Introduction... 3 1.2 Overview of Advantages... 3 1.3 Application Areas... 4 1.4 System Requirement... 4 1.5 Further Information... 4 2 Functions...
Introduction to PXI. Jacques Cilliers. Applications Engineer National Instruments ni.com
1 Introduction to PXI Jacques Cilliers Applications Engineer National Instruments jacques.cilliers@ Traditional Instrumentation 4 The Expectations More Functionality Reduced Cost Smaller Footprint Accelerated
What s New in Data Acquisition
What s New in Data Acquisition NEW! New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software New DAQ Products and Demos NEW! USB DAQ Multifunction Intelligent DAQ DAQ Software
LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications
LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications Publish Date: Dec 29, 2008 38 Ratings 4.16 out of 5 Overview Hardware-in-the-loop (HIL) simulation is achieving a highly realistic simulation
Using COTS Hardware with EPICS Through LabVIEW A Status Report. EPICS Collaboration Meeting Fall 2011
Using COTS Hardware with EPICS Through LabVIEW A Status Report EPICS Collaboration Meeting Fall 2011 EPICS Overview Experimental Physics and Industrial Control System (EPICS) Used to develop and implement
Mounzer saleh Applications engineer Tel:
ni.com Mounzer saleh Applications engineer Email: mounzer.saleh@ni.com Tel: +961 1 33 28 28 What comes with your Academic Site License? Plan : What is an ASL Can you purchase an ASL? Your ASL : out of
MULTIFUNCTION AIRCRAFT FLIGHT SURFACE BETTER AVIONICS VERIFICATION TOOL ELECTRONIC CONTROL UNIT TEST SYSTEM: A. Project Goals
MULTIFUNCTION AIRCRAFT FLIGHT SURFACE ELECTRONIC CONTROL UNIT TEST SYSTEM: A BETTER AVIONICS VERIFICATION TOOL Modern avionics exemplify safety and mission-critical, dependable systems. These systems continue
LabVIEW Core 1. What You Need To Get Started. File Locations. The course installer places the course files in the following location: ni.
LabVIEW Core 1 What You Need To Get Started LabVIEW Core 1 Course Manual (online) LabVIEW Core 1 Exercise Manual (online) LabVIEW Core 1 Course CD (preloaded on S Share) Multifunction DAQ device File Locations
Designing Real-Time Control Applications Using LabVIEW and CompactRIO. Developer Days 2009
Designing Real-Time Control Applications Using LabVIEW and CompactRIO Developer Days 2009 Agenda CompactRIO Overview Technology Applications Real-Time Control Software Architecture Basic Process Control
Product Information ES582.1 Compact USB Device
Product Information 1 Public PGA 2017-01-16 ETAS GmbH 2017. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product Description 2 Public PGA
ControlDesk Next Generation
www.dspace.com ControlDesk Next Generation Universal, modular experiment and instrumentation software for ECU development Synchronized access to ECUs, RCP and HIL platforms, dspace VEOS, and bus systems
Hardware-in-the-Loop and Real-Time Testing Techniques
Hardware-in-the-Loop and Real-Time Testing Techniques Fanie Coetzer Application Engineer The Challenge of Complexity BMW 7 Series: 70 ECUs Lexus 460: 100 ECUs Embedded Control Systems Navigation Control
Automating Calibration Systems
Automating Calibration Systems Dave Skinner Global Services, Business Manager Agenda Why Automate? Automation Solutions Challenges with Automating Calibration Calibration Automation Architecture Calibration
High-Performance NI-XNET Interfaces for CAN, LIN, and FlexRay NI PCI-851x, NI PXI-851x, NI 986x
Technical Sales (866) 531-6285 orders@ni.com Requirements and Compatibility Ordering Information Detailed Specifications Pinouts/Front Panel Connections For user manuals and dimensional drawings, visit
LabWindows /CVI Using the Latest ANSI C Tools for High-Performance Automated Test
LabWindows /CVI Using the Latest ANSI C Tools for High-Performance Automated Test Agenda Introduction to LabWindows/CVI and modular instruments Developing modular instrument applications Hybrid systems
Create Without Limits: Add the Power of User-Programmable FPGAs to Your Test Applications
1 Create Without Limits: Add the Power of User-Programmable FPGAs to Your Test Applications Farris Alhorr Business Development Manager RF & Wireless Comm farris.alhorr@ The Parameters of Instrumentation
High-Performance NI-XNET Interfaces for CAN, LIN, and FlexRay NI PCI-851x, NI PXI-851x, NI 986x
Technical Sales (866) 531-6285 orders@ni.com Requirements and Compatibility Ordering Information Detailed Specifications Pinouts/Front Panel Connections For user manuals and dimensional drawings, visit
VT System Smart HIL Testing
VT System Smart HIL Testing V1.0 2010-06-04 Agenda > ECU Testing Testing a Door Control Unit Summary and Outlook Slide: 2 ECU Testing I/O Access for ECU Testing ECU has to be tested in its natural environment
Increase Your Test Capabilities with Reconfigurable FPGA Technology
Increase Your Test Capabilities with Reconfigurable FPGA Technology CTEA Electronics Symposium Ryan Verret Senior Product Manager FPGA Technology for Test National Instruments Graphical System Design A
Improving Prototype Validation with NI Multisim and LabVIEW. Bhavesh Mistry, Product Manager National Instruments
Improving Prototype Validation with NI Multisim and LabVIEW Bhavesh Mistry, Product Manager National Instruments bhavesh.mistry@ni.com 1 Modern Design Having to Do More Time to market continues to shrink
Product Information ES582.1 Compact USB Device
Product Information ES582.1 Compact USB Device 1 Public PGA 2016-08-15 ETAS GmbH 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product
Prototyping the Autonomous Future Joe Cassar, Engineering Group Manager. dspace Inc Pontiac Trail, Wixom, MI 48393
Prototyping the Autonomous Future Joe Cassar, Engineering Group Manager dspace Inc 50131 Pontiac Trail, Wixom, MI 48393 2 What s the Common Denominator? Ford AUDI RS7 Concept Nissan Porsche ZF 3 MicroAutobox
LabVIEW Real-Time Module Release Notes
LabVIEW Real-Time Module Release Notes Version 7.1 Contents Installation These release notes provide installation information, references to related documentation, descriptions of the new features, and
Developing Measurement and Control Applications with the LabVIEW FPGA Pioneer System
Developing Measurement and Control Applications with the LabVIEW FPGA Pioneer System Introduction National Instruments is now offering the LabVIEW FPGA Pioneer System to provide early access to the new
What s New in LabVIEW 2018 and LabVIEW NXG
What s New in LabVIEW 2018 and LabVIEW NXG Swathi Madhavan Field Marketing Engineer, National Instruments ni.com Who Uses LabVIEW? Electronics and Industrial Machinery Aerospace and Defense Semiconductor
PC-based data acquisition I
FYS3240 PC-based instrumentation and microcontrollers PC-based data acquisition I Spring 2016 Lecture #8 Bekkeng, 20.01.2016 General-purpose computer With a Personal Computer (PC) we mean a general-purpose
CHAPTER 3 LabVIEW REAL TIME APPLICATION DEVELOPMENT REFERENCES: [1] NI, Real Time LabVIEW. [2] R. Bishop, LabVIEW 2009.
![CHAPTER 3 LabVIEW REAL TIME APPLICATION DEVELOPMENT REFERENCES: [1] NI, Real Time LabVIEW. [2] R. Bishop, LabVIEW 2009.](/thumbs/84/89380099.jpg "CHAPTER 3 LabVIEW REAL TIME APPLICATION DEVELOPMENT REFERENCES: [1] NI, Real Time LabVIEW. [2] R. Bishop, LabVIEW 2009.")
CHAPTER 3 By Radu Muresan University of Guelph Page 1 ENGG4420 CHAPTER 3 LECTURE 1 October 31 10 5:12 PM CHAPTER 3 LabVIEW REAL TIME APPLICATION DEVELOPMENT REFERENCES: [1] NI, Real Time LabVIEW. [2] R.
ni.com/training Quizzes LabVIEW Core 1 ni.com/training Courses Skills learned: LabVIEW environment Certifications Skills tested: LabVIEW environment
LabVIEW Core 1 What You Need To Get Started LabVIEW Core 1 Course Manual LabVIEW Core 1 Exercise Manual LabVIEW Core 1 Course CD Multifunction DAQ device GPIB interface DAQ Signal Accessory, wires, and
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing imc BUSDAQ / BUSLOG Efficient data acquisition and real-time calculations Advantages
Measurement and Calibration Software
Measurement and Calibration Software NEW: Easier and faster to use XCP on Ethernet LIN monitoring Extended instrument set XCP on FlexRay 1) dspace 1) As of March, the product or parts of the product are
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing Partner Italiano di imc dal 1993 Instrumentation Devices Srl Via Acquanera 29-22100
ni.com Integrating EPICS and LabVIEW
Integrating EPICS and LabVIEW Agenda Overview Channel Access (CA) Support LabVIEW EPICS CA Server LabVIEW EPICS CA Client EPICS IOC Support CompactRIO PXI 3 rd Party Options Questions and Answers 3 Overview
Scientific Instrumentation using NI Technology
Scientific Instrumentation using NI Technology Presented by, Raja Pillai Technical Consultant and Field Engineer National Instruments Australia Pty. Ltd. NI s Platform-Based Approach 2 The LabVIEW RIO
INCA-EIP V7.2 User s Guide
INCA-EIP V7.2 User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
RTStand LV 124 Fully-automated testing solution for LV 124 automotive norm
LV 124 Fully-automated testing solution for LV 124 automotive norm LV 124 RF / Radar Industrial Automation NATIONAL INSTRUMENTS ALLIANCE PARTNER OF 2015/2016 WINNER OF THE NATIONAL INSTRUMENTS TECHNICAL
Designing Next Generation Test Systems An In-Depth Developers Guide
An In-Depth Developers Guide Designing Next Generation Test Systems An In-depth Developers Guide Contents Section 1 Executive Summary Chapter 1 Increasing Design Complexity...1-1 Shorter Product Development
FPGA design with National Instuments
FPGA design with National Instuments Rémi DA SILVA Systems Engineer - Embedded and Data Acquisition Systems - MED Region ni.com The NI Approach to Flexible Hardware Processor Real-time OS Application software
CANape. Product Information
Product Information Table of Contents 1 Overview... 4 1.1 Introduction... 4 1.2 Overview of Advantages... 4 1.3 Application Areas... 5 1.4 Features... 5 1.5 System Requirements... 5 1.6 Supported Bus Interfaces
A MATLAB Toolbox For ASAM MCD-3MC And ASAM MCD3 Measurement & Calibration Automation
A MATLAB Toolbox For ASAM MCD-3MC And ASAM MCD3 Measurement & Calibration Automation Donn A Shull, L & D Engineering L.L.C. Thomas G Prucha, dspace Inc. 1 Introduction This presentation describes a new
CANape ASAM-MCD3 Interface Version Application Note AN-AMC-1-103
Version 3.2 2018-06-19 Application Note AN-AMC-1-103 Author Restrictions Abstract Vector Informatik GmbH Public Document This is document is a general introduction explaining the CANape ASAM-MCD3 Interface
CAN. ECU Measurement and Calibration Toolkit User Manual. ECU M&C Toolkit User Manual. December G-01
CAN ECU Measurement and Calibration Toolkit User Manual ECU M&C Toolkit User Manual December 2009 371601G-01 Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq imc BUSDAQflex at a glance Provides 2 to 12 CAN nodes
LabVIEW 2009 Real-Time & FPGA 最新技術剖析. National Instruments 美商國家儀器 行銷部技術經理吳維翰
LabVIEW 2009 Real-Time & FPGA 最新技術剖析 National Instruments 美商國家儀器 行銷部技術經理吳維翰 LabVIEW RT 2009 Agenda NI Real-Time Hypervisor MathScript RT RT System Backup and Restore crio Streaming API LabVIEW FPGA 2009
imc BUSDAQ / imc BUSLOG
imc BUSDAQ / imc BUSLOG autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing www.imc-berlin.com/busdaq imc BUSDAQ/BUSLOG at a glance Processes
National Instruments & OSIsoft Academic Program Partnership
National Instruments & OSIsoft Academic Program Partnership Presented by Today s 30-Minute Agenda 1. Who is driving the partnership? 2. Who should be interested? 3. What has been developed? 4. How does
Increasing the Value of your Test System Investment
1 Increasing the Value of your Test System Investment Michael Hutton Senior Market Development Manager Real-Time Test National Instruments NOW THEN 3 NOW THEN 4 Growth of Embedded Software Boeing 787 Dreamliner
CANoe 6.0. The Professional Development and Test Tool for CAN, LIN, MOST, FlexRay and J1587 TOOLS FOR NETWORKS AND DISTRIBUTED SYSTEMS
CANoe 6.0 The Professional Development and Test Tool for CAN, LIN, MOST, FlexRay and J1587 CANoe is an all-round tool for the development, testing and analysis of networks and ECUs. It supports the user
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq Advantages imc BUSDAQflex Efficient vehicle and measurement
New Technologies in Data Acquisition
New Technologies in Data Acquisition Agenda Introduction to PC Based Data Acquisition New Technologies in Data Acquisition 1. New Bus Technologies 2. Signal Conditioning, Timing and Synchronization Introduction
Gas Combustion Testing With LabVIEW
Gas Combustion Testing With LabVIEW Asa Kirby Senior Product Manager Taking Advantage of Trends in Product Test & Validation with LabVIEW Asa Kirby Senior Product Manager Abstract The growing complexity
Advanced NI-DAQmx Programming Techniques with LabVIEW
Advanced NI-DAQmx Programming Techniques with LabVIEW Agenda Understanding Your Hardware Data Acquisition Systems Data Acquisition Device Subsystems Advanced Programming with NI-DAQmx Understanding Your
NI Technical Symposium 2016
NI Technical Symposium 2016 How can Modular Instruments reduce the Cost of Test? Fanie Coetzer Field Sales Engineer National Instruments Box Instruments 3 Box Inserting New Technology 1 2 3 4 5 6 7 8 5
XNET-CAN idaq Component
XNET-CAN idaq Component User guide July 2016 Rev 08 XNET-CAN idaq Component User Guide 2 TOOLS for SMART MINDS Worldwide technical support and product information: www.toolsforsmartminds.com TOOLS for
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
What s new in ASAM AE HIL API V1.0.0?
What s new in ASAM AE HIL API V1.0.0? Darmstadt, 2009-06-23 (ASAM TSC Meeting) 1 What is Hardware-in-the-Loop Simulation? 2 Architecture of a HIL Test Bench Host Software for Test Process Management, DataManagement
IMPROVING PERFORMANCE IN A VXI OR PXI TEST SYSTEM USING DISTRIBUTED DSP
IMPROVING PERFORMANCE IN A VXI OR PXI TEST SYSTEM USING DISTRIBUTED DSP Joseph A. Mielke ZTEC Instrument 7715 Tiburon St. NE Albuquerque, NM, 87109-5904 505-342-0132 jmielke@ztec-inc.com Abstract - This
Tips for Code Re-Use. Rejwan Ali, Marketing Engineer NI Africa and Oceania
ni.com 1 ni.com Tips for Code Re-Use Rejwan Ali, Marketing Engineer NI Africa and Oceania Graphical System Design A platform-based approach for measurement and control 4 Calling Compiled Code From LabVIEW
Installation Guide: Quanser Rapid Control Prototyping Toolkit 2016 for NI myrio
Installation Guide: Quanser Rapid Control Prototyping Toolkit 2016 for NI myrio STEP 1 Install NI LabVIEW and Add-on Requirements The Quanser Rapid Control Prototyping (QRCP) toolkit supports either 32-bit
MORPHEE 2, EtherCAT and Fast ECU Access. D2T s automation system : A fast and reliable communication with test bed
MORPHEE 2, EtherCAT and Fast ECU Access D2T s automation system : A fast and reliable communication with test bed 1 Contents MORPHEE 2 Overview EtherCAT Overview EtherCAT Advantages EtherCAT in MORPHEE
Adaptive AUTOSAR Extending the Scope of AUTOSAR-based Embedded Software
Adaptive AUTOSAR Extending the Scope of AUTOSAR-based Embedded Software Vector Congress 2017, September 6 th 7 th, Shanghai China V0.1 2017-08-04 Introduction Use Cases for Adaptive AUTOSAR Infotainment
Application State Machine
Application State Machine Project In this tutorial, create a real, working program to help you learn how to develop programs for your own applications in the future. This tutorial guides you through writing
Real and Virtual Development with SystemDesk
Real and Virtual Development with SystemDesk Joe Fairchild Project Manager Software Development and Validation dspace, Inc. Goals of AUTOSAR Create libraries of software components Reusable Hardware-independent
Copyright, Data Science Automation, Inc. All Rights Reserved. Page 1 of 5
Characterization of the Next Generation Aircraft Fuel Pump By Ben Rayner and Gregory Cala, PhD Project Consultant Data Science Automation United States of America Category: Aerospace/Defense Products Used:
LabVIEW Tutorials. T.1 Temperature Measurement and Cold Junction Compensation (CJC) LUMS School of Science and Engineering
LabVIEW Tutorials T.1 Temperature Measurement and Cold Junction Compensation (CJC) LUMS School of Science and Engineering Umer Hassan & Muhammad Sabieh Anwar Introduction: In this tutorial we shall learn
XCP. Version 1.0. The Universal Measurement and Calibration Protocol Family. Part 3. XCP on CAN - Transport Layer Specification
XCP Version 1.0 The Universal Measurement and Calibration Protocol Family Part 3 XCP on CAN - Transport Layer Specification Association for Standardization of Automation and Measuring Systems Association
Open, Scalable Real-Time Solutions
Open, Scalable Real-Time Solutions Introducing TestDrive ECU-in-the-Loop Testing Q & A Alan Soltis Applications Engineer TestDrive Simulator An Overview Compact, robust chassis Pentium 4
COTS Technology for High Energy Physics Instrumentation Dr. James Truchard President, CEO, and Cofounder National Instruments
COTS Technology for High Energy Physics Instrumentation Dr. James Truchard President, CEO, and Cofounder National Instruments Corporate Background Leaders in Computer-based Measurement and Automation Long-term
Install the Software and Hardware
WHERE TO START WITH YOUR NI 4350/4351 This document explains how to begin using your National Instruments 4350/4351 high-precision temperature and voltage meters. The NI 4350/4351 (NI 435x) products include
Automation Desk 3.3 Tool Set - Test Automation Software. P.BALAJI Software Engineer L&T IES, Mumbai
Automation Desk 3.3 Tool Set - Test Automation Software P.BALAJI Software Engineer L&T IES, Mumbai Content Definition & Objective User interface of Automation Desk Various Blocks inside the Automation
CANape. Product Information
Product Information Table of Contents 1 Overview...4 1.1 Introduction...4 1.2 Overview of Advantages...4 1.3 Application Areas...5 1.4 Features...5 1.5 System Requirements...5 1.6 Supported Bus Interfaces
Open Platform for Developing and Testing Smart Grid Automation Systems. Igor Alvarado National Instruments Corp.
Open Platform for Developing and Testing Smart Grid Automation Systems Igor Alvarado National Instruments Corp. Panel 1: State of the Art: Modeling, Simulation, Testing and Calibration Facilities April
Current and Prospective High-speed Measurement Systems
Current and Prospective High-speed Measurement Systems Vector Congress 2010, Stuttgart V0.01 2010-11-29 Agenda > Definition: Measurement and Calibration Hardware Customer Requirements Vector Product Strategy
CANbedded. Product Information
Product Information Table of Contents 1 Solutions with CANb edded... 4 1.1 CANbedded... 4 1.2 Advantages of CANbedded... 4 1.3 Your Partner Right From the Start... 4 1.4 Uniform Solution... 4 2 CANbedded
Manufacturer: National Instruments
Manufacturer: National Instruments Board Assembly Part Numbers (Refer to Procedure 1 for identification procedure): Part Number and Revision Description 194021B-01(L) or later USB-6259 194021B-03(L) or
Adaptive AUTOSAR Extending the Scope of AUTOSAR-based Embedded Software
Adaptive AUTOSAR Extending the Scope of AUTOSAR-based Embedded Software Vector GB Ltd Annual Conference 2017, September 27 th 28 th V0.1 2017-09-26 Introduction Use Cases for Adaptive AUTOSAR Infotainment
NI-DAQmx Basic Course NITS John Shannon
NI-DAQmx Basic Course NITS 2005 John Shannon Agenda Intro to DAQMX Difference between traditional / DaqMX MAX and DAQ Assistance Analog Input / Output Property Nodes Buffered / Continuous Acquisition Analog
How to validate your FPGA design using realworld
How to validate your FPGA design using realworld stimuli Daniel Clapham National Instruments ni.com Agenda Typical FPGA Design NIs approach to FPGA Brief intro into platform based approach RIO architecture
NI Technical Symposium ni.com
NI Technical Symposium 2016 1 New Hardware Technologies for DAQ Applications Nicholas Haripersad Field Sales Engineer Session Objectives Introduce the three major NI DAQ platforms Present future trends
High-Level Synthesis with LabVIEW FPGA
High-Level Synthesis with LabVIEW FPGA National Instruments Agenda Introduction NI RIO technology LabVIEW FPGA & IP Builder RIO Hardware Platform Application 2 An Ideal Embedded Architecture Processor
Test & Measurement Solutions. Konrad Technologies Radolfzell, Germany
Test & Measurement Solutions Konrad Technologies Radolfzell, Germany About Konrad Technologies Konrad Technologies is a system integrator providing products and turnkey solutions, consulting services and
Measurement Studio Using.NET in Your Test and Measurement Applications
Measurement Studio Using.NET in Your Test and Measurement Applications Agenda Introduction to Microsoft Visual Studio.NET Acquire Analyze Present Resources What are Customers Saying About Measurement Studio?
LabVIEW control solutions on Mac. Christophe Salzmann. Ecole Polytechnique Fédérale de Lausanne - Switzerland
1 LabVIEW control solutions on Mac Christophe Salzmann Ecole Polytechnique Fédérale de Lausanne - Switzerland 2 1! Outline Education & research context Control on the Mac (timeline) Current solutions Research
Simplify System Complexity
1 2 Simplify System Complexity With the new high-performance CompactRIO controller Arun Veeramani Senior Program Manager National Instruments NI CompactRIO The Worlds Only Software Designed Controller
New Software-Designed Instruments
1 New Software-Designed Instruments Nicholas Haripersad Field Applications Engineer National Instruments South Africa Agenda What Is a Software-Designed Instrument? Why Software-Designed Instrumentation?
Graphical System Design
Graphical System Design Nancy Dib Marketing Manager 21 st Century Challenges Engineering Grand Challenges, NAE Advance health informatics Engineer the tools of scientific discovery Reverse-engineer the
XCP The Standard Protocol for ECU Development. Fundamentals and Application Areas. Andreas Patzer Rainer Zaiser
XCP The Standard Protocol for ECU Development Fundamentals and Application Areas Andreas Patzer Rainer Zaiser Andreas Patzer Rainer Zaiser XCP The Standard Protocol for ECU Development Date December 2016
Control Technology. motion controller and power amplifier
Control Technology motion controller and power amplifier Erik van Hilten Rik Prins National Instruments Agenda Controller, the central element Tools for controller design in drive systems: - in PC-based
M. Brett McMickell, Ph.D.
Rapid Development of Electronic Systems for Space Applications AIAA/USU Conference on Small Satellites M. Brett McMickell, Ph.D. Thom Kreider, Lindsay Harding, Ron Strong, Brad Mouring, Kosta Ilic August
NI-Industrial Communications for EtherCAT
INSTALLATION GUIDE NI-Industrial Communications for EtherCAT This document explains how to install the NI-Industrial Communications for EtherCAT software and describes the hardware and software requirements.